Académique Documents
Professionnel Documents
Culture Documents
TO
PRESENTATION
Course No:CE-2104 Credit:0.75
Course Title: Mechanics of Solids-II Sessional
SUBMITTED BY SUBMITTED TO
Dr. Md. Abdus Salam
Professor
Md.Rasaeduzzaman Md. Suman Mia
STUDENT ID:151035 Lecturer
GROUP NO:03 Department of Civil
Engineering, DUET
PRESENTATION
ON
Yield load =
Proportional limit =
Failure criteria =
DISCUSSION
This test was based on determination of yield load and proportional
limit and also find the failure criteria of bolted joint in wood
subjected to compression load . Yield load, proportional limit, has
been determined through the help of plain graph which was plotted
load vs. deformation graph .The yield load has been found 17.33 KN,
and proportional limit 10.5 KN, and the failure criteria was bearing
failure of the wood section by the attached bolt on the hole . Yield
load has been determined through an offset method with respect to
5% of bolt diameter.