Académique Documents
Professionnel Documents
Culture Documents
PS Precautions and
Emergency Measures for
Large Traffic
www.huawei.com
World Cup European Cup Ramadan Oktoberfest Auto Show APEC Submit
KPI Analysis
Network Scheme check
Basic KPI Analysis ( Basic check )
Network Disaster Tolerance
KPI Fault Reason Analysis
Configuration Check Check
Drop KPI Analysis
Precaution & Rectification Check Check the precaution or rectification whether closed.
Active Alarm Check Check the active alarms in the system, espacially major and critical alarms.
Routinely Configuration Check Check the inteafce parameters and software parameters
Check the service awareness related configurations, including rule effectiveness, rule
Configuration Check SA Configuration Check
conflict, recommended configurations .etc.
Drop KPI Analysis According to the CHR, do the deep analysis for drop KPI.
GU Network Signaling Storm Check 'Smartphone Abnormal Signaling Reduction' feature whether enable and the
Signaling Storm Evaluation 2/3G flow control configuration.
Evaluation LTE Network Signaling Storm Check 'LTE Precise Paging' feature whether enable and the 2/3G flow control
Evaluation configuration.
Traffic Mode Traffic Model Changement Compare live network traffic model with the old one to find the difference between
Changement Analysis Analysis them, give a warning about the traffic model change.
Anti-Attack
Anti-Attack Configuration Check Check the anti-attack related configuration to prevent the attack from outside
Configuration Check
Charge Anti-Spoofing
Charge Anti-Spoofing Check Check the charge spoofing related configurations in case of fee loss
Check
Check Items
Info Collection
Guide
The Video Introduction of PS Inspection Tools Using Guidance made by network insight
team
http://3ms.huawei.com/hi/group/2034629/thread_4587929.html?
mapId=4313299&for_statistic_from=all_group_forum
Charge Anti-Spoofing Check PS Network Inspection Delivery Guide-Charge Anti-Spoofing Check By Tools MBB
SA Configuration Check PS Network Inspection Delivery Guide-SA Configuration Check By Tools MBB
Disaster Tolerance Check PS Network Inspection Delivery Guide-Disaster Tolerance Check Manually NA
Service Affect Configuration PS Network Inspection Delivery Guide-Service Affect Configuration Check Manually NA
Check
Traffic Mode Changement PS Network Inspection Delivery Guide-Traffic Model Changement Analysis Manually FMA
Analysis
Capacity Assessment PS Network Inspection Delivery Guide-Capacity Assessment Manually NA
KPI Fault Reason Analysis PS Network Inspection Delivery Guide-KPI Fault Demarcation Manually FMA
Drop KPI Analysis PS Network Inspection Delivery Guide-KPI Fault Demarcation Manually FMA
GU Network Signaling Storm PS Network Inspection Delivery Guide-Network Signaling Storm Evaluation Manually NA
Evaluation
LTE Network Signaling Storm PS Network Inspection Delivery Guide-Network Signaling Storm Evaluation Manually NA
Evaluation
Hyperlink for each guide made by network insight team
http://3ms.huawei.com/hi/group/2034629/thread_4631637.html?mapId=4588637&order=asc&p=0#id-
27638141
Performance
Mean Attach Numbers@
SGSN Traffic Model BH(K)
Board Signaling process Audit
Resource Audit Algorithm
Periodic
Data Network resource
Network traffic model Audit Mean Activated PDP
Contexts@ BH(K) Monitoring
Utility ratio
Exceed Baseline Audit
NO
Traffic @ BH (Mbps)
Attach Requests @ BH(K)
Configuration PDP Activate Requests YES
GGSN Traffic Model @BH
Periodic
…… Report
3 Monitor Risk
Deep Audit of Resource utility & Audit
Report
User Behavior Analyze
Identification
4
Smartphone Analyze
Service Plan/ Huawei
Marketing/ PS Network Resource NO NPM
New Service/
User Num Forecast
Requirement Plan
Resource Bottlenecks Solution Future
YES
Forecast
Network
5 Traffic Model Forecast Resource Forecast 7 Design
6 Report
Mar-Jun
Development trend Optimization Resource
Network Adjustment advice
Traffic Model
Analyze
Target Resource 网络调整建议
advice Requirements
Network Adjustment
Forecast
Ternimal/User
Behavior Analyze
GSN
Traffic Forecast
Resource Forecast
Implement Report
Model Algorithm
• Content of the
Item
report(USN): Sub-item Description
Assessment Method Describe the methods in this report.
Introduction Assessment Assumptions Assummptions for busy hours and SPP.
Assessment Baselines
Network Element Version NE versions
Assessment Assessment Summary Summery according to assessment results
Summary Assessment Conclusion Conclusion according to assessment results
Information About the Live Performance statistics on the live network and Traffic Model on the
Network Live Network
1)enable the flow control of Gr interface: If the SGSN is overloaded , Implement the flow
Signalling Traffic
USN9810 2 ) enable the flow control of GBP process control first and then Block the BSCs and then To ensure Gr interface overload can recoevr SASP
Flow Control
3 ) block BSC(Suggest the Operate be done from BSS side) unblock them one by one to reduce SGSN's load.
Run the following commands on the USN9810 to deactivate and then Try to recover the fault after equipments or links
Fault Recover USN9810 If the faulty RNCs locate on different ECU board
activate the faulty links are abnormal
If the faulty RNCs locate on the same interfaces Try to recover the fault after equipments or links
Fault Recover USN9810 Bind the faulty RNCs to the normal EPU board:
of EPU back board. are abnormal
If Direct Tunnel is enabled, change Direct Tunnel to two tunnels to If Direct Tunnel is enabled, GTPU Path between Try to recover the fault after equipments or links
Fault Recover USN9810
avoid GTP-U path faults between the RNC and the GGSN. RNC and GGSN is abnormal are abnormal
RNC Fault
Adjust the loads by changing linkset selection masks and link When service damage occurs due to unbalanced Try to recover the fault after equipments or links
Fault Recover USN9810
selection masks. sending loads between different links, are abnormal
Switch over the faulty EPU: Try to recover the fault after equipments or links
Fault Recover USN9810 If all the faulty eNodeBs located in the same EPU
are abnormal
Soaring DDN leads 4G paging overload-enable
Signalling Traffic Decrease 4G paging message count, then EnodeB
USN9810 The LTE Precise Paging feature is under license control. Apply for the LTE Precise Paging ( V900R012C00SPH300 to
Flow Control signalling load will reduce.
license before activating this feature. V900R013C00SPH225)
1. For 4G,block the eNodeB from RAN first(Suggested) If the USN9810 is overload,enable the flow
Try to recover the fault after equipments or links
Fault Recover USN9810 2. When there is no recovery solution from network side,apply for the control first,block the eNodeB and unblock one
are abnormal
way that limit the source address of some network by one to reduce the load.
The Radius load can be reduced by limiting the accounting message rate Raduis AAA Fault
Signalling Traffic Decrease the network overload due to huge traffic
UGW9811 between the UGW and the Radius server ( The maximum number of The Radius server is overloaded.
Flow Control messages sent to the billing server for each SPU-instance per second ) . of service
Bypass the faulty Radius server.
1,If authentication function is enabled between UGW and Radius server,we
should disable this function at first;If not,go to step 2 directly Try to recover the fault after equipments or links
Equipments By Pass UGW9811 If can not recover by above action.
2,Disable wait-accounting-response of radius server and continue server are abnormal.Do not use abnormal Raduis server.
when response timeout from radius server
Signalling Traffic Adjust WAL value for flow control Decrease the network overload due to huge traffic
UGW9811
Flow Control If OCS is overload. of service
Bypass the faulty OCS. OCS Fault
Try to recover the fault after equipments or links
Equipments By Pass UGW9811
If can not recover by above action. are abnormal.Do not use abnormal OCS.
[UGW]pcc-view
[UGW-pcc]pcrf test host
Signalling Traffic Decrease the network overload due to huge
UGW9811 test.node.epc.mnc000.mcc460.3gppnetwork.org realm
Flow Control epc.mnc000.mcc460.3gppnetwork.org ip 10.31.242.146 port 3868 If PCRF is overload , adjust WAL value for traffic of service
10.31.242.150 port 3868 vpn GX-VPN wal 100 flow control