Académique Documents
Professionnel Documents
Culture Documents
Note on information classification: This material is classified as ‘Restricted external use’. It can be presented and shared (as PDF)
1 © Nokia 2016 Restricted external use with customers, prospects and business partners with whom Nokia has a valid Non Disclosure Agreement.
Agenda
•MSS Controller to manage all the peripheral modules. MSS has a one layer control
architecture implemented by a microprocessor acting as Equipment Controller and Physical
Machine Controller.
•Clock Reference Unit (CRU) with main function to generate the Network Element Clock.
Ethernet interfaces can be optionally used or as user interfaces or to connect up to 6 MPT
(Outdoor unit)
The core board could be protected through a Core “Spare” (same PN of Core “Main”) that can be added to provide
Control platform redundancy and protection of aggregated data.
The Core-E card has two roles, main and spare Core-E.
The main Core-E performs key node management, control functions, provisioning, configuration management and
cross-connection matrix. The matrix is a standard Ethernet switch based on VLAN.
The CorEvo-10G board also carries a micro SD Card(*), which holds the terminal SW Configuration and Node License.
The main CorEvo card is required.
The spare CorEvo card provides aggregate traffic and control platform protection.
The spare CorEvo card is optional.
All FAN Alarms supported by the Core-E are supported by the CorEvo
FAN Alarm FAN Alarm Evo (*)
MSS1
MSSO
All the following equipments could be mixed in the same network
and even in the same link.
•In MSS4, In case of CorEvo 1G, fans are mandatory in all configuration and temperature range is up to +50
°C.
•Upgrade Kits are available to migrate from :
•MSS-4 protected to MSS-4 CorEvo 1G protected
•MSS-4 basic to MSS-4 CorEvo 1G basic
Monitoring Performance Monitoring from NMS (24H counters check). Please refer to Advanced Services for quotation
Activity foreseen along whole project duration.
TPM effort Please refer to Advanced Services for quotation
TPM effort to be added along project duration
Core-E to CorEvo Upgrade Procedure In this procedure you will find all the
technical requirements needed for the Core-
E to CorEvo upgrade (in case the customers
want to do it by themselves) Core-E to CorEvo Upgrade Procedure.pdf
18 © Nokia 2016
Core-E Board
Interfaces details
On top of the main functions the Core Board, the Core-E carries the Compact Flash Card, which holds the
terminal SW Configuration and Node License.
21 © Nokia 2016
CorEvo
Interfaces details
The CorEvo-10G board does embedded a traffic matrix of 100 Gbit/sec(*) and provides HW support for 10Gbps(*) user
interfaces.
The Frontal panel interfaces provides:
CorEvo-1G board is an optimized version of CorEvo-10G. Feature level is the same apart from the 2xSFP+ ports that here are
only 1Gbps capable.
24 © Nokia 2016
CorEvo
10G solution
Lab measures
TARGET=1500ns
Residual ToD error : total < 120 nsec over three links
Residual ToD error : total < 200 nsec over five links
MPR
MPR MPR
Fiber
Fiber hand-off
Benefits
VPN Support
• Leverages advanced QoS to minimize impact to lower priority traffic
• End-to-end network and services management support
MPR MPR
28 © Nokia 2016
Core-E to CorEvo
Smooth Upgrade