Vous êtes sur la page 1sur 74

RAPID PROTOTYPING TECHNOLOGIES

Prof. Dr. Bilgin KAFTANO LU www.mfge.atilim.edu.tr/kaftanoglu

Manufacturing Engineering Department ATILIM UNIVERSITY ANKARA


2009 1

WHAT IS PROTOTYPING?

 Essential part of the product development and manufactuing cycle;  Assesing the form, fit and functionality of a design before a significant investment in tooling is made.

2009

Until Recently, prototypes:


 were handmade by skilled craftsmen (i.e. High Cost);  adding weeks or months to the product development time (increase time to market)

So:
 A few design iterations could be made before tooling went into production;  Seldom optimization of designed parts or at worst parts did not function properly.

2009

Rapid Prototyping:
 name given to a host of related technologies that are used to fabricate physical objects directly from CAD data sources;  These methods are unique in that they add and bond materials in layers to form objects.  Other names: Solid Freeform Fabrication,Layer Manufacturing

2009

With Rapid Prototyping,


 Objects can be formed with any geometric complexity without the need for elaborate (very complex) machine setup and jigs and fixtures.  Objects can be made from multiple materials (Such as Aluminum and Polyamide, Copper and Steel), or as composites, or materials can even be varied in a controlled fashion at any location in an object;  The construction of complex objects are reduced to a manageable, straightforward, and relatively fast process.

2009

With Rapid Prototyping,


 time to market in manufacturing is reduced;  the product designs are better understood and communicated;  rapid tooling to manufacture those products are made.

2009

The names of specific Rapid Prototyping processes: Stereolithography (SLA), Selective laser sintering (SLS), Fused deposition modeling (FDM), Laminated object manufacturing (LOM), Laser Engineering Net Shaping (LENS) Inkjet Systems and Three Dimensional Printing (3DP). Each has its singular strengths and weaknesses.

2009

STEREOLITHOGRAPHY The most widely used rapid prototyping technology. Builds plastic parts or objects a layer at a time by tracing a laser beam on the surface of a vat of liquid photopolymer (Self Adhesive Material). Liquid photoplymer quickly solidifies wherever the laser beam strikes the surface of the liquid. Once one layer is completely traced, it's lowered a small distance into the vat and a second layer is traced right on top of the first. The layers bond to one another and form a complete, three-dimensional object after many such layers are formed.
2009 8

STEREOLITHOGRAPHY

2009

The platform in the tank of photopolymer at the beginning of a run.


2009 10

STEREOLITHOGRAPHY
The objects have overhangs or undercuts which must be supported during the fabrication process by support structures. These are either manually or automatically designed and fabricated right along with the object. Upon completion of the fabrication process, the object is elevated from the vat and the supports are cut off.

The platform at the end of a print run, shown here with several identical objects.

2009

11

STEREOLITHOGRAPHY

2009

12

2009

13

STEREOLITHOGRAPHY
 The second most accurate and best surface

finish of any rapid prototyping technology.  Wide range of materials with properties mimicking those of several engineering thermoplastics. Biomedical materials are available, and ceramic materials are currently being developed.  The technology is also notable for the large object sizes that are possible.
2009 14

STEREOLITHOGRAPHY
On the negative side,  Material is expensive, smelly and toxic; Removing supports may adversely effect surface finish; Parts often require a postcuring operation in a separate oven-like apparatus for complete cure and stability. Post Curing ensures that no liquid or partially cured resin remains.

The ultraviolet "oven" used to cure completed objects.


15

2009

FUSED DEPOSITION MODELLING Second most widely used rapid prototyping technology, after stereolithography A plastic filament is unwound from a coil and supplies material to an extrusion nozzle. The nozzle: is heated to melt the plastic and has a mechanism which allows the flow of the melted plastic to be turned on and off. is mounted to a mechanical stage which can be moved in both horizontal and vertical directions.
2009 16

FUSED DEPOSITION MODELLING

2009

17

FUSED DEPOSITION MODELLING As the nozzle is moved over the table in the

required geometry, it deposits a thin bead of extruded plastic to form each layer. The plastic hardens immediately after being extruded and bonds to the layer below. The chamber is held at a temperature just below the melting point of the plastic.

2009

18

FUSED DEPOSITION MODELLING  Materials: ABS and investment casting wax, and more recently polyamide materials;
 Researches for embedding Ceramic and Metal powders in polymer filament is going on.  ABS offers good strength;  Support materials: Same material: Problems during removing;  Break Away Support System: Easily removed;  Water Works: Water-soluble support material.

(in ultrasonic vibration tank)


2009 19

FUSED DEPOSITION MODELLING

Office-friendly and quiet; Fairly fast for small parts or for those that have tall, thin form-factors; Very slow for parts with wide cross sections; The finish of parts have been greatly improved over the years, but aren't quite on a par with stereolithography. FDM offers great strength.
2009 20

INKJET

Uses a single jet each for a plastic build material and a wax-like support material, which are held in a melted liquid state in reservoirs The materials harden by rapidly dropping in temperature as they are deposited After an entire layer of the object is formed by jetting, a milling head is passed over the layer to make it a uniform thickness

2009

21

INKJET

2009

22

INKJET Extremely fine resolution and surface finishes,

essentially equivalent to CNC machines; The technique is very slow for large objects; While the size of the machine and materials are office-friendly, the use of a milling head creates noise which may be objectionable in an office environment. Materials selection is very limited and the parts are fragile Especially used in precise casting patterns for jewelry.
2009 23

INKJET

Jevelry Application
2009

A production cut in the middle


24

3D PRINTING

Developed at MIT;
A measured quantity of powder is first dispensed from a similar supply chamber by moving a piston upward incrementally. The roller then distributes and compresses the powder at the top of the fabrication chamber. The jetting head subsequently deposits a liquid adhesive in a two dimensional pattern onto the layer of the powder The powder becomes bonded in the areas where the adhesive is deposited, to form a layer of the object.
2009 25

3D PRINTING

2009

26

3D PRINTING

No external supports are required during fabrication


since the powder bed supports overhangs; Offers the advantages of speedy fabrication and low materials cost; Probably the fastest of all RP methods; Recently color output has also become available; There are limitations on resolution, surface finish, part fragility and available materials.

2009

27

LAMINATED OBJECT MANUFACTURING

object cross sections are cut from paper or other web


material using a laser or a knife; The paper is unwound from a feed roll onto the stack and first bonded to the previous layer using a heated roller which melts a plastic coating on the bottom side of the paper The profiles are then traced by an optics system or knife Areas to be removed in the final object are heavily cross-hatched with the laser to facilitate removal. Excess paper is cut away to separate the layer from the web. Waste paper is wound on a take-up roll
2009 28

LAMINATED OBJECT MANUFACTURING

2009

29

LAMINATED OBJECT MANUFACTURING

2009

30

LAMINATED OBJECT MANUFACTURING It can be time consuming to remove extra material for some geometries; The finish, accuracy and stability of paper objects are not as good as for materials used with other RP methods Material costs are very low, and objects have the look and feel of wood and can be worked and finished in the same manner Application: Patterns for sand castings. Limitations on materials, work has been done with plastics, composites, ceramics and metals. However, available on a limited commercial basis.
2009 31

Laser Engineered Net Shaping A technology that is gaining in importance and in early stages of commercialization. Designed for aerospace industry, especially to produce titanium parts. A high power laser (1400 W) is used to melt metal powder supplied coaxially to the focus of the laser beam through a deposition head. The head is moved up vertically as each layer is completed. Metal powders are delivered and distributed around the circumference of the head either by gravity, or by using a pressurized carrier gas.
2009 32

Laser Engineered Net Shaping

2009

33

Laser Engineered Net Shaping In addition to titanium, a variety of materials can be used such as stainless steel, copper, aluminum etc. Materials composition can be changed dynamically and continuously, leading to objects with properties that might be mutually exclusive using classical fabrication methods. Has the ability to fabricate fully-dense metal parts with good metallurgical properties at reasonable speeds; Objects fabricated are near net shape, but generally will require finish machining.
2009 34

Laser Engineered Net Shaping

Before and after finish machining


2009 35

Laser Engineered Net Shaping

120x120x120 cm LENS Machine


2009 36

Selective Laser Sintering Sintering: bonding of the metal, ceramic or plastic powders together when heated to temperatures in excess of approxiamately half the absolute melting tempertaure. In the industry, sintering is mainly used for metal and ceramic parts (Powder Matallurgy). After pressing (compaction) of the powder inside mold for deforming into high densities, while providing the shape and dimensional control, the compacted parts are then sintered for achieving bonding of the powders metallurgically.
2009 37

Selective Laser Sintering

Compaction
2009

Sintering
38

SINTERING

2009

39

Sintering in Rapid Prototyping Sintering process used in Rapid Prototyping differs from the Powder Metallurgy, such as: Plastic based powders, in additon to metal powders. Local sintering, not overall sintering. Very short sintering period. Laser (heat source) is exposed to sections to be sintered for a very short time. Hard to achive an ideal sintering. In some applications, for achieving the ideal sintering, the finished parts are heated in a seperate sintering owen.
2009 40

Selective Laser Sintering Invented by Carl Deckard during his Phd. studies in Texas University in 1987. Offers the key advantage of making functional parts in essentially final materials. The system is mechanically more complex than stereolithography and most other technologies. A variety of thermoplastic materials such as nylon, glass filled nylon, polyamide and polystyrene are available. The method has also been extended to provide direct fabrication of metal and ceramic objects and tools.

2009

41

Selective Laser Sintering Process: 1) Laser beam is traced over the surface the tightly compacted powder to selectively melt and bond it to form a layer of the object.

2009

42

Selective Laser Sintering Process: 2) Platform is lovered down one object layer thickness to accommodate the new layer of powder

2009

43

Selective Laser Sintering Process: 3) A new layer of powder is coated on the surface of the build chamber.

2009

44

Selective Laser Sintering Process: 4) The powder is supplied from the powder bins to the recoater. This process is repeated until the entire object is fabricated.

2009

45

Selective Laser Sintering The fabrication chamber is maintained at a temperature just below the melting point of the powder Heat from the laser need only elevate the temperature slightly to cause sintering. This greatly speeds up the process; No supports are required with this method since overhangs and undercuts are supported by the solid powder bed; Surface finishes and accuracy are not quite as good as with stereolithography, but material properties can be quite close to those of the intrinsic materials
2009 46

Selective Laser Sintering

Three Types of Laser Sintering Machines: 1) Plastic Laser Sintering Machine 2) Metal Laser Sintering Machine 3) Sand Casting Laser Sintering Machine

2009

47

Selective Laser Sintering


Plastic Laser Sintering: For direct manufacture of styling models, functional prototypes, patterns for plaster, investment and vacuum casting, for end products and spare parts.

Volvo Steering Wheel Engine Block Pattern Plaster Invest. Pattern

2009

48

Selective Laser Sintering


Metal Laser Sintering: For direct production of tooling, including for plastic injection molding, metal die casting, sheet metal forming as well as metal parts, directly from steel based and other metal powders.

A gear for Volvo Corp. Die Cast Parts (500 Al parts produced) Motor Housing

2009

49

Selective Laser Sintering


Sand Laser Sintering: Laser Sintering System for direct, boxless manufacture of sand cores and moulds for metal casting.
V6-24 Valve Cylinder Head. Impeller Steering Block for a car

2009

50

METU SYSTEM


EOS EOSINT P380 Rapid Prototyping System


General Properties

Plastic Laser Sintering System X,Y Axes Alternating Scanning

Technical Specifications Work Envelope: -X Axis: 340 mm -Y Axis : 340 mm -Z Axis : 600 mm Layer Forming Thickness: 0.15mm +/-0.05 mm Max Laser Power: 50 W Z Axis Production Speed: 30 mm / saat Max Scanning Speed: 5 m/s
2009 51

Comparison Chart
CHNO OGY Max art Siz ( m) Speed Accuracy Surface Finish S A 30x30x50 average very good very good S S 34x34x60 average to fair good fair FDM 30x30x50 poor fair fair INKJET 30x15x21 poor excellent excellent 3D INTER OM 65x55x40 good fair fair to poor

30x30x40 excellent fair fair speed, office okay, price, color, price

Strengths

Weaknesses

market market leader, leader, accuracy, office okay, large part materials, price, size, large part materials accuracy, size. wide product size and post weight, processing, speed system price, messy liquids surface finish

accuracy, finish, office okay speed, limited materials, part size

large part size, good for large castings, material cost limited part stability, materials, smoke, fragile parts, finish and finish accuracy

2009

52

Additive Fabrication vs Subtractive Fabrication Additive Fabrication methods (RP) can not become complete
replacement for the Subtractive Fabrication methods (Milling, Turning, EDM etc.) Subtractive methods: have reached an extraordinary level of development and they continue to evolve. they are fast, versatile, inexpensive, readily available and wellunderstood by large numbers of practitioners. in many cases they are quite sufficient to make prototypes rapidly, no equal when it's necessary to make very precise parts in final materials.
2009 53

Additive Fabrication vs Subtractive Fabrication Additive technologies are instead complementary to subtractive ones, if the situation calls for:
1.complex or intricate geometric forms, 2.simultaneous fabrication of multiple parts into a single assembly, 3.multiple materials or composite materials in the same part.

Additive technologies make it possible to completely control the composition of a part at every geometric location. Thus, RP is the enabling technology for controlled material composition as well as for geometric control.

2009

54

Limitations of RP Methods 1) ACCURACY Stair Stepping: Since rapid prototyping builds object in layers, there is inevitably a "stairstepping" effect produced because the layers have a finite thickness.

2009

55

Limitations of RP Methods 1) ACCURACY Precision: tolerances are still not quite at the level of CNC, Because of intervening energy exchanges and/or complex chemistry one cannot say with any certainty that one method of RP is always more accurate than another, or that a particular method always produces a certain tolerance.

2009

56

Limitations of RP Methods
1) FINISH The finish and appearance of a part are related to accuracy, but also depend on the method of RP employed. Technologies based on powders have a sandy or diffuse appearance, sheet-based methods might be considered poorer in finish because the stairstepping is more pronounced.

2009

57

Limitations of RP Methods
1) Secondary Operations Parts made by stereolithography are frequently not completely cured when removed from the machine. Final cure is effected in a box called a post-cure apparatus (PCA) Parts made by three dimensional printing (3DP) and MultiJet Modeling (MJM) can be very fragile and might not be able to take normal handling or shipping stresses. These parts are often infiltrated with cyanoacrylate adhesive or wax as a secondary operation to make them more durable. Metal parts will almost certainly require final machining and must usually undergo a thermal baking cycle to sinter and infiltrate them with a material to make them fully-dense. Other than powder-based methods all other methods require a support structure to be removed in a secondary operation which may require considerable effort and time.
58

2009

Limitations of RP Methods

Support structure red material , watersoluble, fused deposition modeling FDM .

Support structure, stereolithography.

2009

59

Limitations of RP Methods 3) SYSTEM COSTS RP systems cost from $30,000 to $800,000 when purchased new. The least expensive are 3D Printer and FDM systems; the most expensive are specialized stereolithography machines. In addition, there are appreciable costs associated with training, housing and maintenance. For example it can cost more than $20,000 to replace a laser in a stereolithography system. 4) Material High cost. Available choices are limited.
2009 60

RP in Medical Applications Oral Surgery

2009

61

RP in Medical Applications

2009

62

RP in Medical Applications Modelling in Medical Applications: Models are created using medical imaging data obtained from a standard Computed Tomography (CT) or Magnetic Resonance Imaging (MRI). Bone structures such as skull or pelvis are all imaged using CT. Soft tissue structures such as brain and organs are best imaged by MRI. The slice data from CT or MRI are processed into 3D images by using sophisticated software.

2009

63

RP in Medical Applications Oral Surgery

2009

64

RP in Medical Applications Oral Surgery

2009

65

RP in Medical Applications Prosthesis Applications

A bone structure which was produced from ceramic powder embedded paper material in LOM.
2009 66

RP in Medical Applications

2009

67

RP in Medical Applications

2009

68

RP in Medical Applications

2009

69

RP in Medical Applications

2009

70

RP in Medical Applications

Bone Structure with the cranial vasculature highlighted in red. This model was made using SLS with a special material called Stereocol. (Coloured when exposed to high power laser)
2009 71

RP in Medical Applications TISSUE ENGINEERING

Actual living tissue cells are extracted from the patient and seeded onto a carrier which accomodates and guides the growth of new cells in 3D within laboratory environment.
2009 72

RP in Medical Applications

2009

73

THANK YOU!

2009

74

Vous aimerez peut-être aussi