Académique Documents
Professionnel Documents
Culture Documents
Introduction
Alcatel - Nortel proposal based on a complete and evolutive products portfolio and solutions
Pag e2
Sun Fire E4900 8 or 12 1500Mhz UltraSparcIV+ dual core CPUs 32/48 GB RAM Dual Sun StorageTeck 6140 disk array16x146GB 15krpm disks Solaris 9
The customer benefits from a carrier-grade, RoHScompliant large-scale server capable of managing up to 3000 BTS. ST6140 disk arrays are managed thru SunMC application The new UltraSparc IV+ processors make maximum use of this new i/o performance.
Pag e3
Performance Server
3GPP PM
Corba Bus
CPU Board
Corba Bus
CPU Board
MS: 3000 NodeB MS: 2000 NodeB PS: 4000 NodeB PS: 4000 NodeB 24000 Cells
24000 cells
Pag e4
SF E4900
Simple to Operate
Single MSS15K based platform Hitless patching capability
Investment protection
Support IP UTRAN, HSDPA and HSUPA
RNC 1500
Pag e5
FEATURE VALUE
RNC 2500 Highest density RNC on the market RNC 1500 to 2500 Seamless Upgrade
Same value proposition as RNC 1500 + double capacity Less OPEX i.e. Single Platform / Shelf Pag Seamless Upgrade i.e. No e6 reparenting
> Alimentation
DC -48V, +24V (opt.), AC plinth (opt.) 1040W (U222 @ 30W PA) OTSR to U444, U333TD and U222222 1+1,1+2 & 2+2 in 3 sectors 45W MCPA , 60W MCPA Max 5 x CEM 256
> Consumption
> Configuration
-5C to +45C High capacity Indoor Rural (as OTSR) HSDPA support, HSUPA ready
Pag e7
> Alimentation
AC 110-240V, DC -48V (opt.), AC+DC (opt.) 1220VA (U222 @ 30W PA) Internal batteries, no need for extra cabinet. Backup time is 1h45m for U222 OTSR to U444, U333TD and U222222 1+1,1+2 & 2+2 in 3 sectors 45W MCPA, 60W MCPA Max 5 x CEM256
> Consumption
> Configuration
-40C to +50C under solar load 1120W/sqm High Capacity Outdoor Rural (as OTSR) HSDPA support, HSUPA ready
Pag e8
Product positioning: Micro-cellular applications (as overlay of a macro layer) Capacity hotspots / Coverage holes Installation site constraints In-building applications Size & Weight Power supply Consumption
46 x 35 x 19 cm (HxWxD) 25 kg AC 220V or DC -48V Max 260 W for 1 carrier Max 300 W for 2 carriers 1 or 2 carriers 5 W RF per carrier 128 CE per carrier Outdoor: -33C to +45C Up to +55C with fans (optional)
(DC)
Configuration
Environmental
Pag e9
Baseband capacity: 2x128 CE 7 PS I/B 384 DL users or 20 HSDPA users, sharing 10.7 Mbit/s per carrier
Main Unit
3 capacity variants: 1 carrier x 1 sector (128 CE) UA4.2 Hw ready for 2 carriers x 1 sector Sw locked at 1 carrier x 1 sector UA4.2 (128 CE) UA05 2 carriers x 1 sector (2 x 128 CE)
Outdoor (IP65) 30 liters (464x350x187 mm) 25 kg, -33 / +45 (w/o fans)
Options for mounting on walls / poles Fans (for up to +55)
sw
Pag e 10
DESCRIPTION
Digital BTS: Indoor / DC Power supply 200W UMTS modules repackaged to 19 inches 3 CEM slots with 384 CE Up to 8 E1s/1 IMA group Support of up to 6 RRH2020 via optical fiber Evolutive to xModules capability (with xCEMs 256 and gxCCM) up to 768 CE
VALUE PROPOSITION
The UMTS dBTS 2U is designed to be installed within a GSM BTS user space or a standard telecom rack No major site re-engineering needed
Pag e 11
Consumption
Configuration
Environmental Application
Omni 2 adjacent carriers 20W RF 10MHz bandwidth Dark-fibre: few meters -20km Future daisy chain option -40C to +50C Natural cooling Warehousing, everywhere Alternative macro BTS solution
Pag e 12
RRH miscellaneous characteristics Sizes (hxwxd) & weight w/o options 50cmx30cmx18,5cm ( volume =28 l ) - 19 Kg Operational features Environmental Power supply Power consumption Installation Reliability TX coupling port - Debug interface LEDs AISG RET interface(*) 2 protected external alarms(*) Outdoor (IP55): -40C to +50C - no fan ( natural convection cooling ) Max wind speed = 200km/h AC variant:: 100-250V AC, -48V battery back-up interface(*), surge protection included DC variant: -48V ( -40.5V / -57V ), surge protection included DC variant: 185W typ Wall or pole ( 2 variants) mounting kits - optional solar shield MTBF > 150000 hrs (*) Note RRH is HW ready, refer to FPG for SW features
Pag e 13
dBTS 6100
or
dBTS 2U
Pag e 14
F1
F2
BTS
dBTS 2U
F1 F2
or
F1
F2
dBTS 6100
Pag e 15
Same cabinet for dBTS and rBTS OPEX reduction with Lower footprint, volume, weight, power consumption
Consumption
<300 W for digital cabinet 1700 W for radio cabinet (maximum configuration)
Configurations
Digital cabinet for support of RRH (Up to 640 CE, future 1280) dBTS 6100 Radio cabinet Up to U333 rBTS 6100
Environmental
Indoor (6110): -5C to +45C Outdoor (6120): -33C to +50C
Pag e 16
DESCRIPTION
Digital BTS: No plinth need for wall/pole mounting
2U User space
Up to 5 iCEM-128+1 iCCM
1 GPxOIM
Cooling Unit
RRH DC power supply with dBTS AC version - Short : up to 30mn (w/o RRH)
Pag e 17
DESCRIPTION Radio BTS: 160kg (fully configured) Indoor DC or Outdoor AC Up to 2 xTRM Modules Up to 3 sectors Up to 3 MCPA 45W or 60W Re-use of the standard UMTS Modules
Pag e 18
Fiber link
Pag e 19
Available
May 07 March 07
8.8x48x25 108x58x65
DC Both
3 x 256 5x256
N/A N/A
rBTS 6100
108x58x65
Both
N/A
RRH 2020
50 x 30 x 20
Both
N/A
100% 98% 2%
Micro 1120 BTS 12010 BTS 12010 dBTS6100 + RRH dBTS2U + RRH dBTS6100 + rBTS6100 BTS 12020 BTS 12020 dBTS6100 + RRH dBTS2U + RRH dBTS6100 + rBTS6100
Feb 07 Available Available March 07 May O7 Sep 07 TBC Available Available March 07 May O7 Sep 07 TBC
Macro Outdoor
Easy Difficult
% TBD % TBD
MBO2 MBO2
Dimensions: 2U height equivalent to 88mm Width according to 19 inches standard Depth 240mm Weight: < 8 Kg Environmental conditions: IP20 Operating temperature range: -5C to +65C Typical Power consumption ranges from 110W (one iCEMs128) to 190W when fully equipped (i.e. 3 iCEMs128) Airflow managed by fans, powered and controlled from the back plane