Académique Documents
Professionnel Documents
Culture Documents
Contact info:
Assist. Lect. PhD Eng. Dumitru MOLDOVAN Mission Impossible: Asking questions Urgent matters: dumitru.moldovan@dst.utcluj.ro 5 laboratories:
1. 2. 3. 4. 5.
Testing concrete and/or steel. Non-destructive test methods Testing concrete and/or steel. Destructive test methods Testing concrete. Modulus of Elasticity Testing concrete. Bond Strength Reinforcement types for constructions
Design of singly reinforced rectangular cross-sections Design of doubly reinforced rectangular cross-sections Design of singly reinforced tee/flanged cross-sections Shear design
5.
[1] : [3]
4/5/12
Assist. Lect. PhD Eng. Dumitru MOLDOVAN, Assist. Lect. PhD Eng. Dan BOMPA
[1]
Course
Around 20 questions: Some design similar to Seminars One larger Theory Subject
Rule: References:
1.
1. 2.
3.
4.
[2] : [3]
4/5/12
Assist. Lect. PhD Eng. Dumitru MOLDOVAN, Assist. Lect. PhD Eng. Dan BOMPA
Course
Questions?
[3]
[3] : [3]
4/5/12
Assist. Lect. PhD Eng. Dumitru MOLDOVAN, Assist. Lect. PhD Eng. Dan BOMPA
1st Laboratory
1st Week
What are non-destructive test methods? Usage? Advantages? Types: hardness ultrasonic others combined
Testing Concrete. Hardness method (Schmidt Hammer) Surface conditions: flat smooth, clean, dry, draw test grid
-
Indentation: Read two perpendicular diameters of the same indentation Calculate mean/(average/medium) diameter and use tabulated values to extract mean Click to edit Master subtitle style concrete strength Rebound: Determine rebound index, n Calculate the total coefficient of influence and use tabulated values to extract mean concrete strength
Cement Cement dosage Aggregate Concrete Relative Humidity (RH) conditions type Dumitru MOLDOVAN, Assist. Lect. PhD Eng. Dan BOMPA type age Assist. Lect. PhD Eng. [4]
1st Laboratory
1st Week
Testing Concrete. Ultrasonic pulse method Surface conditions: flat smooth, clean, dry, apply coupling medium and press hard transducer on the surface
-
Calculate speed of ultrasonic pulse, vL Calculate the total coefficient of influence and use tabulated values to extract mean concrete strength
Fine Testing steel (Cover m meter): fraction ratio (0-1 aggregat mm) e size
Maximu
Determine:
[2] : [2]
4/5/12
Assist. Lect. PhD Eng. Dumitru MOLDOVAN, Assist. Lect. PhD Eng. Dan BOMPA
[5]
5th Laboratory
1st Week
DEX:
ARMTUR, armturi, s.f. Totalitatea barelor metalice prinse ntre ele care ntresc o construcie (de beton armat sau precomprimat).
Bars for Reinforced Concrete (pasive reinforcement) and Tendons for Prestressed Concrete (active reinforcement: wire, bar, rod, strand or bundles of such elements)
Rebars (main reinforcement): - deformed bars: high strength steel (PC52, PC60) S400, S500, S600 - welded wire fabrics (sheets/roles): srm tras neted/amprentat pentru beton (STNB/STAB) to edit Master subtitle style Click Rebars (secondary/constructive reinforcement): - plain bars: low strength/mild steel (OB37) - Welded wire fabrics (STNB)
[1] : [11]
4/5/12
Assist. Lect. PhD Eng. Dumitru MOLDOVAN, Assist. Lect. PhD Eng. Dan BOMPA
[6]
Laboratory 5
Week 1
[2] : [11]
4/5/12
Assist. Lect. PhD Eng. Dumitru MOLDOVAN, Assist. Lect. PhD Eng. Dan BOMPA
[7]
5th Laboratory
1st Week
4/5/12
Assist. Lect. PhD Eng. Dumitru MOLDOVAN, Assist. Lect. PhD Eng. Dan BOMPA
[8]
5th Laboratory
1st Week
[4] : [11]
4/5/12
Assist. Lect. PhD Eng. Dumitru MOLDOVAN, Assist. Lect. PhD Eng. Dan BOMPA
[9]
Laboratory 5
Week 1
rebars
Marca oel Diametru nominal Limita de curgere Rezistena la (mm) fyk [N/mm2] rupere ft [N/mm2] Denumire comercial
welded wires
Provenien
S255 S235 S355 S345 S335 S420 S405 S395 S500 S490 S440 S390 S500 S460
[5] : [11]
6-12 14-40 6-14 16-28 32-40 6-12 14-28 32-40 6-28 3-4 4.5-7.1 8-10 3-10 6-10
255 235 355 345 335 420 405 395 500 490 440 390 500 460
360 510
OB37 PC52
RO RO
590
PC60
RO
Bst500S STNB
EU RO
4/5/12
Assist. Lect. PhD Eng. Dumitru MOLDOVAN, Assist. Lect. PhD Eng. Dan BOMPA
Laboratory 5
Week 1
Storage
Bending
Click to edit Master subtitle style
Placing
[6] : [11]
4/5/12
Assist. Lect. PhD Eng. Dumitru MOLDOVAN, Assist. Lect. PhD Eng. Dan BOMPA
[11]
5th Laboratory
1st Week
Placing
[7] : [11]
4/5/12
Assist. Lect. PhD Eng. Dumitru MOLDOVAN, Assist. Lect. PhD Eng. Dan BOMPA
[12]
5th Laboratory
1st Week
2.50 2010
3.00 1865
4.00 1715
5.00 1570
7.00 1470
8.00 1375
4/5/12
Assist. Lect. PhD Eng. Dumitru MOLDOVAN, Assist. Lect. PhD Eng. Dan BOMPA
[13]
Laboratory 5
Week 1
Reinforced Concrete
Prestressed Concrete
[9] : [11]
Assist. Lect. PhD Eng. Dumitru MOLDOVAN, Assist. Lect. PhD Eng. Dan BOMPA
[14]
Laboratory 5
Week 1
[10] : [11]
Assist. Lect. PhD Eng. Dumitru MOLDOVAN, Assist. Lect. PhD Eng. Dan BOMPA
[15]
5th Laboratory
1st Week
Questions?
[16]
[11] : [11]
4/5/12
Course
Homework
1. 2.
Non-destructive test methods. Usage, advantages. Over-lay in the same graph the stress-strain curves for the following steel grades: S400, S500, S600.
[1] : [1]
Assist. Lect. PhD Eng. Dumitru MOLDOVAN, Assist. Lect. PhD Eng. Dan BOMPA
[17]