Téléversements by met-calc

Hydrodynamic Calculation Howell-Jet Valve

Hydrodynamic Calculation Butterfly Valve for Pump Operation (Lattice Disc)

Hydrodynamic Calculation Butterfly Valve for Pump Operation (Lattice Disc)

Threaded Holes (11.4.3.3) EN 13445-3

Spherical Shells (7.4.3) EN 13445-3

Rolled shells (7.4.2) EN 13445-3

Nuts (11.4.3.2) EN 13445-3

Hydrodynamic Calculation Spherical Valve

Multi-stage valve

Hydrodynamic Calculation Needle Valve

Hydrodynamic Calculation Needle Valve Closing Flow Against the Direction of Movement of the Piston

Hydrodynamic Calculation Howell-Bunger Valve

Hydrodynamic Calculation Gate Valve (Through-conduit)

Hydrodynamic Calculation Butterfly Valve (Lenticular Disc)

Hydrodynamic Calculation Butterfly Valve (Lattice Disc)

Hydrodynamic Calculation Butterfly Valve (Double Disc)

Full Face Flange With Metal to Metal Contact (11.10) EN 13445-3

Flange With Hole With Continuous Sealing Surface With Metal to Metal Contact (11.10.0) EN 13445-3

Contact Stress Two Cylinders

Contact Stress of the Cylinder in the Cylindrical Socket

Contact Stress of Cylinder on Flat Surface

Conical Shells (7.6.4) EN 13445-3

Buckling

Allowable Stress

Allowable Hertz Pressure

Hydrodynamic Calculation Gate Valve (Through Conduit)

Hydrodynamic Calculation Butterfly Valve (Double Disc)

Hydrodynamic Calculation Butterfly Valve (Lattice Disc)

Multi-hole Cage

The Flow Characteristic on the Position of the Drive

Power Screws

Multi-stage Valve

Figure 9.5-3 Spherical Shell With a Non Radial Nozzle en 13445-3_Figure 9.5-3

Figure 9.5-2 Cylindrical Shell With Nozzle Oblique in the Transverse Cross Section en 13445-3_Figure 9.5-2

Figure 9.5-1 Cylindrical Shell With Nozzle Oblique in the Longitudinal Cross Section en 13445-3_Figure 9.5-1

U-shaped Reinforced Bellows (Austenitic Steel)

U-shaped Convolutions Circumferentially Welded at Their Crest or Root (Austenitic Steel)

U-shaped Unreinforced Bellows (Austenitic Steel)

Buckling

Contact Stress (Sphere)

Contact Stress (Cylinder)

The Bolt Connects 2 Flanges (Torque Load)

The Cross Pin Connects 2 Flanges (Torque Load)

Square Head for Shaft-hub Connection

Hydrodynamic Calculation Needle Valve - Closing Flow Against the Direction of Movement of the Piston

Hydrodynamic Calculation Needle Valve

Articulated Trunnion in the Rod

Hydrodynamic Calculation Howell-Bunger Valve

Figure 9.4-13 Conical Shell With Isolated Opening. Combined Reinforcement From Shell and Nozzle en 13445-3_Figure 9.4-13