0 Me

Code list Code list
Item Glovia Code Glovia Description Description Glovia Code (Legacy) Mass Item Glovia Code Glovia Description Description Glovia Code (Legacy) Mass
70 FLG-WN-PN40-TON-032-BR5-245GH WN FLG 032 PN40 TONG (11-C) BR5 245GH Weld. neck fl'g DN32 PN40 Tongue (EN1092-1 11+C) BR5 (s=4,0) 1,64 kg 1 FLG-WN-PN40-TON-015-BR1-245GH WN FLG 015 PN40 TONG (11-C) BR1 245GH Weld. neck fl'g DN15 PN40 Tongue (EN1092-1 11+C) BR1 (s=1,6) 0,62 kg
17 FLG-WN-PN40-TON-450-BR1-245GH WN FLG 450 PN40 TONG (11-C) BR1 245GH Weld. neck fl'g DN450 PN40 Tongue (EN1092-1 11+C) BR1 (s=4,0) 78,07 kg
A-A 22 FLG-WN-PN40-TON-250-BR2-245GH WN FLG 250 PN40 TONG (11-C) BR2 245GH Weld. neck fl'g DN250 PN40 Tongue (EN1092-1 11+C) BR2 (s=5,0) 26,1 kg
s
A 51 FLG-WN-PN40-TON-032-BR4-245GH WN FLG 032 PN40 TONG (11-C) BR4 245GH Weld. neck fl'g DN32 PN40 Tongue (EN1092-1 11+C) BR4 (s=3,6) 1,61 kg
A 56 FLG-WN-PN40-TON-100-BR4-245GH WN FLG 100 PN40 TONG (11-C) BR4 245GH Weld. neck fl'g DN100 PN40 Tongue (EN1092-1 11+C) BR4 (s=6,3) 6,11 kg
62 FLG-WN-PN40-TON-350-BR4-245GH WN FLG 350 PN40 TONG (11-C) BR4 245GH Weld. neck fl'g DN350 PN40 Tongue (EN1092-1 11+C) BR4 (s=11,0) 58 kg
THIS DOCUMENT MUST BE TREATED AS CONFIDENTIAL. IT MUST NOT BE COPIED, DISTRIBUTED TO OTHERS OR ITS CONTENTS BE USED OR
COMMUNICATED EITHER IN WHOLE OR IN PART WITHOUT PERMISSION OF MAYEKAWA EUROPE N.V. ALL RIGHT ARE RESERVED.
Notes:
1- This table lists codes for welding neck (Type 11) flanges PN40 per EN 1092-1.
Face: Type C (Tongue) 02 Add note 10b (EN 13445 + 14276 requirements), old 10 -> 10a XDE 13/09/2022
2- Neck thickness "s" is given in description here above.
01 Note 5 updated (This revision has retroactive effect) XDE 16/06/2020
3- Code 245GH designates material EN 10222-2 P245GH.
4- Substitution of P245GH by materials here under is always accepted: 00 First issue XDE 17/02/2020
a/ DIN EN 10222-2 / DIN EN 10222-5 P250GH Rev Description Drw App Date App
b/ EN 10222-2 P280GH Revision table
c/ EN 10273 P250GH, P265GH, P295GH, P275NH MAYEKAWA EUROPE N.V. Customer:
5- Substitution of P245GH by materials here under is always accepted for applications under 150°C and subject Leuvensesteenweg, 605
Proj. nr:
Proj. name:
to Engineering approval above 150°C. www.mayekawa.eu 1930 Zaventem - Belgium Ext. dwg. nr: Ext. Rev.:
EN 10222-4 P355 family Status:
6- Old material VdTÜV 350/3f C22.8 (W-Nr.1.0460) may be accepted under special circumstances, depending on WN Flange PN40 (Type 11) Tongue with specified
Engineering Dept. approval
7- Material EN 10273 P235GH is not allowed. Released neck th'k EN 1092-1 P245GH
8- Material substitution by other material is normally not allowed and, in any case, subject to Engineering Dept. approval. Code list
9- Certificate for this piece is at least EN 10204 3.1. Some higher certification can be required for special execution. Vault data Drawn: XDE 17/02/2020
In this case, requirements listed on purchase order take precedence. Idw file: 000005-0-ME-PD-04012.idw
Mod file: FLG-WN-PN40-TON-125-BR5-245GH.ipt Chk'd: GLOVIA Code Size Sheet
10a- Material for use under AD-Merkblatter 2000 should mention compliance to W-9 / W-13 section on certificate Cat.:
02
10b- For use under EN 13445-3 + EN 14276-1 or EN 13480-3 + EN 14276-2, material has to have impact test at
App'd:
Eng: FLG-WN-PN40-TON-___-BR_-245GH A1 1 of 1
0°C or lower. Absorbed energy and temperature per applicable standard. Unless mentioned, all dimensions in
mm
Scale: SO Emittor Type Doc. number Rev.
11- General requirements for certification are detailed in 000006-0-ME-PS-00001.

12- In case of doubt, contact ME Engineering Dept.
Rc = Int. BSPT taper (ISO 7)
Rp = Int. BSPT parallel (ISO 7)
R = Ext. BSPT (ISO 7)
NTS
Replaces:
000005-0-ME-PD-04012 02

0 Me

Transféré par

Informations du document

Titre original

Copyright

Formats disponibles

Partager ce document

Partager ou intégrer le document

Options de partage

Avez-vous trouvé ce document utile ?

Ce contenu est-il inapproprié ?

Droits d'auteur :

Formats disponibles

0 Me

Transféré par

Droits d'auteur :

Formats disponibles

Code list Code list

11- General requirements for certification are detailed in 000006-0-ME-PS-00001.

Vous aimerez peut-être aussi