Académique Documents
Professionnel Documents
Culture Documents
Se
connecter
Accueil MonF5 / Centre de connaissances / Système BIG-IP : configuration initiale
/ Introduction à la configuration initiale de BIG-IP
S'applique à:
Afficher les versions
Assurez-vous d'utiliser le guide de la plateforme qui correspond à l'installation que vous effectuez.
https://techdocs.f5.com/en-us/bigip-14-1-0/big-ip-system-initial-configuration/introduction-to-big-ip-initial-configuration.html 1/6
13/01/2024 22:45 Introduction to BIG-IP Initial Configuration,Introduction to BIG-IP Initial Configuration,Introduction to BIG-IP Initial Configuratio…
À l'aide de l'utilitaire de configuration, vous pouvez activer la licence et provisionner le système BIG-IP.
1. Depuis un poste de travail connecté au réseau sur lequel vous avez configuré l'interface de gestion,
saisissez la syntaxe d'URL suivante où <adresse_IP_de_gestion>est l'adresse que vous avez configurée
pour la gestion des appareils : https://<adresse_IP_de_gestion>
3. Cliquez surSuivant.
L'écran Propriétés générales s'ouvre.
4. Cliquez surActiver.
L'écran Licence s'ouvre.
6. Cliquez surSuivant.
8. Cliquez surSuivant.
Le certificat de l'appareil s'affiche.
9. Cliquez surSuivant.
The General Properties and User Administration screen is displayed.
11. Verify that the Management Port 1 setting shows the management IP address that you configured on the
LCD panel of the hardware platform. If the field is blank, type a management IP address, netmask, and
management route.
12. If you want to specify an alternate management IP address, then for the Management Port 2 setting, type a
management IP address, netmask, and management route.
If the management port 1 address is an IPv4 address, then the management port 2 address must be an IPv6
address.
13. In the Host Name field, type the host name of this BIG-IP system.
For example, www.siterequest.com.
The BIG-IP system prompts you to log in again.
16. For the Config Sync and High Availability settings, clear the check boxes.
https://techdocs.f5.com/en-us/bigip-14-1-0/big-ip-system-initial-configuration/introduction-to-big-ip-initial-configuration.html 2/6
13/01/2024 22:45 Introduction to BIG-IP Initial Configuration,Introduction to BIG-IP Initial Configuration,Introduction to BIG-IP Initial Configuratio…
b. In the Netmask field, type a network mask for the self IP address.
2. For the VLAN Tag ID setting, retain the default value, auto.
Select Tagged when you want traffic for that interface to be tagged with a VLAN ID.
c. Click Add.
d. Repeat these steps for each interface that you want to assign to the VLAN.
4. Click Next.
This completes the configuration of the internal self IP addresses and VLAN, and displays the screen for
configuring the default VLAN external.
b. In the Netmask field, type a network mask for the self IP address.
2. In the Default Gateway field, type the IP address that you want to use as the default gateway to VLAN
external.
3. For the VLAN Tag ID setting, retain the default value, auto.
This is the recommended value.
Select Tagged when you want traffic for that interface to be tagged with a VLAN ID.
c. Click Add.
d. Repeat these steps for each interface that you want to assign to the VLAN.
https://techdocs.f5.com/en-us/bigip-14-1-0/big-ip-system-initial-configuration/introduction-to-big-ip-initial-configuration.html 3/6
13/01/2024 22:45 Introduction to BIG-IP Initial Configuration,Introduction to BIG-IP Initial Configuration,Introduction to BIG-IP Initial Configuratio…
5. Click Finished.
This causes you to leave the Setup utility.
Creating a pool
You can create pool of servers that you group together to receive and process traffic, to enable the BIG-IP system to
efficiently distribute the load on servers.
2. Click Create.
The New Pool screen opens.
4. In the Resources area of the screen, use the New Members setting to add the pool members.
For example, the pool members for http_pool are 192.168.100.10:80 and 192.168.100.11:80. The
pool members for specificport_pool are 192.168.100.20:80 and 192.168.100.21:80.
5. Click Finished.
When you create a virtual server, you specify a destination IP address and service port. All other settings on the virtual
server have default values. You can change the default values of any settings to suit your needs.
2. Click Create.
The New Virtual Server screen opens.
3. In the Name field, type a unique name for the virtual server.
If you want to specify multiple IP addresses, select the Address List button, and confirm that the
address list that you previously created appears in the box.
The supported format is address/prefix, where the prefix length is in bits. For example, an IPv4
address/prefix is 10.0.0.1 or 10.0.0.0/24, and an IPv6 address/prefix is ffe1::0020/64 or
2001:ed8:77b5:2:10:10:100:42/64. Lorsque vous utilisez une adresse IPv4 sans spécifier de préfixe, le
système BIG-IP utilise automatiquement un/32préfixe.
L'adresse ou les adresses IP de ce champ doivent se trouver sur le même sous-réseau que l'adresse IP
externe.
https://techdocs.f5.com/en-us/bigip-14-1-0/big-ip-system-initial-configuration/introduction-to-big-ip-initial-configuration.html 4/6
13/01/2024 22:45 Introduction to BIG-IP Initial Configuration,Introduction to BIG-IP Initial Configuration,Introduction to BIG-IP Initial Configuratio…
Si vous souhaitez spécifier plusieurs ports autres que tous les ports, sélectionnez l'optionListe
des portset confirmez que la liste de ports que vous avez créée précédemment apparaît dans la
zone.
7. Conservez les valeurs par défaut pour tous les autres paramètres.
Après avoir effectué cette tâche, vous disposez d'un serveur virtuel qui écoute le trafic des applications et agit en
fonction des valeurs configurées dans le serveur virtuel.
Contactez le support
AVOIR UNE
QUESTION?
SUIVEZ-NOUS
Assistance et ventes >
https://techdocs.f5.com/en-us/bigip-14-1-0/big-ip-system-initial-configuration/introduction-to-big-ip-initial-configuration.html 5/6
13/01/2024 22:45 Introduction to BIG-IP Initial Configuration,Introduction to BIG-IP Initial Configuration,Introduction to BIG-IP Initial Configuratio…
https://techdocs.f5.com/en-us/bigip-14-1-0/big-ip-system-initial-configuration/introduction-to-big-ip-initial-configuration.html 6/6