Académique Documents
Professionnel Documents
Culture Documents
Materiel Hydraulique
Materiel Hydraulique
409
Matériel hydraulique
Amortisseurs et Pompes
MATÉRIEL
MATÉRIELHYDRAULIQUE
HYDRAULIQUE
AMORTISSEURS ET POMPES
AMORTISSEURS OLÉODYNAMIQUES
AMORTISSEURS OLÉODYNAMIQUES
AMORTISSEURS OLÉODYNAMIQUES
• Charge minimale : Réference Vitesse Course Hauteur Prix
• Charge
700 kg minimale : Réference Vitesse Course Hauteur Prix
d’impact
700 kg
• Charge maximale : d’impact
max.
• Charge
5300 kg maximale : max.
5300 kg filled
• Livré huile
88455 2,08 m/s 230 mm 765 mm xx€
• Livré huile filled
88455 2,08 m/s 230 mm 765 mm xx€
en standard 88456 2,34 m/s 290 mm 915 mm xx€
en standard
• Conforme à la norme
88456 2,34 m/s 290 mm 915 mm xx€
• Conforme à la norme 88457 2,88 m/s 435 mm 1300 mm xx€
EN81 88457 2,88 m/s 435 mm 1300 mm xx€
EN81 CE
• Certifié 88458 3,25 m/s à 550 mm à 1595 mm à xx€
• Certifié CE 88458 3,25 m/s à
6,50 m/s
550 mm à 1595 mm à
2170 mm 5615 mm xx€
6,50 m/s 2170 mm 5615 mm
POMPES HYDRAULIQUES
POMPES HYDRAULIQUES
POMPES HYDRAULIQUES
KIT POMPE Réference Prix
KIT POMPE Réference Prix
88459 xx€
• Pompe à main 88459 xx€
• Pompe
• Livré avecà adaptateurs
• Livréavec
• Livré
main
avecdes
adaptateurs
supports spéciaux KITS
KITSRÉNO-
RÉNO-
• Manomètre des supports spéciaux
• Livré avec
• Manomètre
• Convient pour toutes les unités hydrauliques
• Convient pour
• Instructions toutes lescomplètes
d’installation unités hydrauliques
fournies.
• Instructions d’installation complètes fournies.
VATION
VATIONSTA
STA
KIT RÉSISTANCE DE CHAUFFANTE Réference Prix
KIT RÉSISTANCE DE CHAUFFANTE Réference Prix
88460 xx€
• Huile de chauffage 400w - 230VAC 88460 xx€
• Huile de
• Thermostat chauffage 400w - 230VAC
• Thermostat
• Cable
• Cable pour toutes les centrales hydrauliques
• Convient
• Convient pour toutes les centrales hydrauliques
H200-088461 H300-088462
H200-088461 H300-088462
REFROIDISSEUR D’HUILE
REFROIDISSEUR D’HUILE Réference
Réference
Prix
Prix
• Livré avec adaptateurs 88463 xx€
• Livré avec adaptateurs 88463 xx€
•2 x 0-10 mètres de tuyau hydraulique
• 2 x kW
• 12,5 0-10- 2,5
mètres de tuyau hydraulique
kW puissance de refroidissement
• 12,5 kW
• Thermostat - 2,5 kW puissance de refroidissement
• Thermostat
• Convient pour toutes les unités hydrauliques
• Convient
• L’image pour toutes
montrée lesreprésenter
ne peut unités hydrauliques
refroidisseur fourni.
• L’image montrée ne peut représenter refroidisseur fourni.
Amortisseurs et Pompes
410 Matériel hydraulique Tél : +33 1 55 81 07 74 / Fax : +33 1 48 65 00 43
web : www.sta-ascenseurs.com email : sta@sta-ascenseurs.com
web : www.sta-ascenseurs.com 1 email : sta@sta-ascenseurs.com
Tél : +33 155810774 1 Fax : +33 148650043
Tél : +33 155810774 Fax : +33 148650043
Matériel hydraulique
BLAIN
MATÉRIEL HYDRAULIQUE
BLAIN
EQUIPEMENT HYDRAULIQUE
Equipement hydraulique BLAIN
NO-
STA EV 100 ELECTRO VALVE - 1-1/4’’ Réference Prix
88466 xx€
BLAIN
Web : www.sta-ascenseurs.com / Email : sta@sta-ascenseurs.com Matériel hydraulique 411
EQUIPEMENT HYDRAULIQUE
Equipement hydrauliqueBLAIN
CHAUFFAGE D’HUILE Réference Prix
POUR CENTRALE HYDRAULIQUE 88469 xx€
KITS RÉNO-
MOTEUR-POMPE MICRO ISONIVELAGE
VATIONxx€ STA
Réference Prix
88471
Le micro drive de Blain pour ascenseurs hydrau-
liques consiste en un emsemble petit moteur + pompe et une electrovalve le
tout assemble en 1 bloc. Nécessite une très faible puissance électrique, très
silencieux -pas de chauffage d’huile nécessaire- ce bloc se pose sur la cen-
trale ou sous la centrale hydraulique. Peut être utilisé pour bouger l’appareil
à faible vitesse en phase montage ou en secours et cela independamment
du moteur principal pour des arrêts avec précision et isonivelage.
Amortisseurs et Pompes
412web :Matériel
www.sta-ascenseurs.com
hydraulique email
Tél : +33 1 55 81
3 07 74: sta@sta
/ Fax :-ascenseurs.com
+33 1 48 65 00 43
Tél : +33 155810774 Fax : +33 148650043
Matériel hydraulique
PIÈCES
PIÈCES HYDRAULIQUES
HYDRAULIQUES GMV
GMV
GMV
GMV
PIÈCES HYDRAULIQUES GMV
PIÈCES HYDRAULIQUES
Pièces hydrauliques GMV
Réference Description Prix
Réference
88641 Description
Resistance chauffe huile 230v 500w Prix
xx€
88641 Resistance
avec thermostat chauffedehuile
pré-reglé ON A230v
16°500w
ET OFF A 33° xx€
avec thermostat pré-reglé de ON A 16° ET OFF A 33°
88642 Resistance chauffe huile 380v 500w xx€
88641 88642 88642 Resistance
avec thermostat chauffedehuile
pré-reglé ON A380v
16°500w
ET OFF A 33° xx€
88641 88642 avec thermostat pré-reglé de ON A 16° ET OFF A 33°
88643 Résistance chauffante pour valve 230V 60W xx€
88643 Résistance chauffante pour valve 230V 60W xx€
88656
88656
GMV
Web : www.sta-ascenseurs.com
web : www.sta-ascenseurs.com / Email : sta@sta-ascenseurs.com Matériel hydraulique
email : sta@sta-ascenseurs.com 413
web: +33
: www.sta -ascenseurs.com 20 email : sta@sta -ascenseurs.com
Tél 155810774 20 Fax : +33 148650043
Tél : +33 155810774 Fax : +33 148650043
PIÈCES HYDRAULIQUES GMV
Matériel hydraulique
GMV
88675
88676
GMV
web : www.sta-ascenseurs.com email : sta@sta-ascenseurs.com
414 Matériel hydraulique
Tél : +33 155810774
21
Tél : +33 1 55 81 07 74
Fax/ : +33
Fax : +33 1 48 65 00 43
148650043
Matériel hydraulique
PIÈCES
PIÈCES HYDRAULIQUES
HYDRONIC
HYDRAULIQUES HYDRONIC
HYDRONIC
HYDRONIC
PIÈCES HYDRAULIQUES HYDRONIC
PIÈCES HYDRAULIQUES HYDRONIC
Pièces hydrauliques
RÉNO-
88684 88687 88689
NO-
N STA
Réference Description Prix
STA
Réference
88677 Description
Solenoid valve 48V AC/DC Prix xx€
88677 Solenoid valve 48V AC/DC xx€
88678 Solenoid valve 48/12V AC/DC xx€
88678 Solenoid valve 48/12V AC/DC xx€
88679 Solenoid valve 104V AC/DC xx€
88679 Solenoid valve 104V AC/DC xx€
88680 Solenoid valve 104/12V AC/DC xx€
88680 Solenoid valve 104/12V AC/DC xx€
88681 Solenoid valve 104/24V AC/DC xx€
88681 Solenoid valve 104/24V AC/DC xx€
88682 Solenoid valve 220V AC/DC xx€
88682 Solenoid valve 220V AC/DC xx€
88683 Valve descente DTV xx€
88683 Valve descente DTV xx€
88684 Valve de contrôle CV2 xx€
88684 Valve de contrôle CV2 xx€
88685 Electro valve 1’’ xx€
88685 Electro valve 1’’ xx€
88686 Electro valve’’ 1/4 xx€
88686 Electro valve’’ 1/4 xx€
88687 Levier de commande valve xx€
88687 Levier de commande valve xx€
88688 Sonde thermique 70°C xx€
88688 Sonde thermique 70°C xx€
88689 Resistance de chauffe huile 400W 220V xx€
88689 Alimentation
Resistance par le circuit
de chauffe de l’unité
huile 400W 220Vprincipale xx€
avec un thermostat pré-réglé incorporé
Alimentation par le circuit de l’unité principale
avec un thermostat pré-réglé incorporé
HYDRONIC
Web : www.sta-ascenseurs.com / Email : sta@sta-ascenseurs.com Matériel hydraulique 415
web : www.sta-ascenseurs.com email : sta@sta-ascenseurs.com
web :Tél
www.sta 22 emailFax
: sta@sta -ascenseurs.com
: +33 -ascenseurs.com
155810774 22 : +33 148650043
Tél : +33 155810774 Fax : +33 148650043
PIÈCES HYDRAULIQUES HYDRONIC
Matériel hydraulique
PIÈCES HYDRAULIQUES HYDRONIC
HYDRONIC
PIÈCES HYDRAULIQUES HYDRONIC
PIÈCES HYDRAULIQUES HYDRONIC
Pièces hydrauliques HYDRONIC
VATION
xx€ STA
Réference Description Prix
88690 88691 Manometre
Thermojet 0-100 bar 3/’’ xx€
ÉNO-
NO- Réference
Réference
88702
Description
Description
Kit joints pour piston D.80
Prix
Prix
xx€
N STA
STA
88702
88703
88703
88704
Kit joints pour piston D.80
Kit joints pour piston D.90
Kit joints pour piston D.90
Kit joints pour piston D.100
xx€
xx€
xx€
xx€
88704 Kit joints pour piston D.100 xx€
88705 Kit joints pour ram D.110 xx€
88705 Kit joints pour ram D.110 xx€
88706 Joint pour tête de verrin D.60 xx€
88706 Joint pour tête de verrin D.60 xx€
88707 Joint pour tête de verrin D.70 xx€
88707 Joint pour tête de verrin D.70 xx€
88708 Joint pour tête de verrin D.80 xx€
88708 Joint pour tête de verrin D.80 xx€
88709 Joint pour tête de verrin D.90 xx€
88709 Joint pour tête de verrin D.90 xx€
88710 Joint pour tête de verrin D.100 xx€
88710 Joint pour tête de verrin D.100 xx€
88711 Joint pour tête de verrin D.110 xx€
88711 Joint pour tête de verrin D.110 xx€
88712 Joint pour tête de verrin D.120 xx€
88712 Joint pour tête de verrin D.120 xx€
88713 Kit joints pour distributeur xx€
88713 Kit joints pour15 distributeur
l/m - 250 l/m xx€
15 l/m - 250 l/m
88714 Kit joints pour distributor xx€
88714 Kit joints pour
210 distributor
l/m - 650 l/m xx€
210 l/m - 650 l/m
88715 Jauge de contrôle connection EN81.2 xx€
88715 Jauge de contrôle connection EN81.2 xx€
88716 Manometre xx€
88716 Manometre xx€
88717 Pompe à mains xx€
88717 Pompe à mains xx€
88718 Resistance de chauffe huile 400W 220V xx€
88718 Resistance de chauffe
Alimentation par le huile
circuit400W 220Vprincipale
de l’unité xx€
Alimentation par le circuit de l’unité principale
avec un thermostat pré-réglé incorporé
avec un thermostat pré-réglé incorporé
88719 Résistance de distribution diam 8 x 57 mm 25W 230V xx€
88719 Résistance de distribution diam 8 x 57 mm 25W 230V xx€
88720 Résistance de distribution diam. 10x120 mm 50W 220V xx€
88720 Résistance de distribution diam. 10x120 mm 50W 220V xx€
88721 Résistance de distribution diam. 10 x 120 mm 50W 400V xx€
88721 Résistance de distribution diam. 10 x 120 mm 50W 400V xx€
88722 Presosthat min pression 2-10 bar xx€
88722 Presosthat min pression 2-10 bar xx€
88723 Pressosthat max pression 20-50 bar NO-NC xx€
88723 Pressosthat max pression 20-50 bar NO-NC xx€
MORIS
Web : www.sta-ascenseurs.com / Email : sta@sta-ascenseurs.com Matériel hydraulique 417
web : www.sta-ascenseurs.com email : sta@sta-ascenseurs.com
web : www.sta-ascenseurs.com 24 email : sta@sta-ascenseurs.com
Tél : +33 155810774 24 Fax : +33 148650043
Tél : +33 155810774 Fax : +33 148650043
PIÈCES HYDRAULIQUES OMAR
Matériel hydraulique
PIÈCES HYDRAULIQUES OMAR
OMAR
PIÈCES HYDRAULIQUES OMAR
PIÈCES HYDRAULIQUES
OMAR OMAR
88736
88724 88730 88736
88724 8872588730 88731
88725 8872688731 88732
88726 8872788732 88733
88727 8872888733 88734
88728 8872988734 88735
88729 88735
88737
88737
KITS RÉNO-
KITS RÉNO-
VATION xx€ STA
Réference Description Prix
Réference 88724 Kit joints pour Description
piston diamètre 80 mm année 1985 à 1991
VATION
xx€ STA
Prix
88724 88725 Kit joints Kit
pour piston diamètre 80 mm année 1985 à 1991
joints pour piston diamètre 90 mm année 1985 à 1991 xx€
88725 88726 Kit jointsKit
pour piston
joints pourdiamètre 90 mm année
piston diamètre 1985
100 mm à 1991
année 1985 à 1991 xx€ xx€
88726 88727 Kit joints Kit
pour piston
joints diamètre
pour 100 mm 110
piston diamètre année
mm1985 à 1991
année 1985 à 1991 xx€ xx€
88727 88728 Kit joints Kit
pour piston
joints diamètre
pour 110 mm 120
piston diamètre année
mm1985 à 1991
année 1985 à 1991 xx€ xx€
88728 88729 Kit joints Kit
pour piston
joints diamètre
pour 120 mm 130
piston diamètre année
mm1985 à 1991
année 1985 à 1991 xx€ xx€
88729 88730 Kit joints pour pistonpour
Kit joints diamètre
piston130 mm année
diamètre 1985
80 mm à 1991
année après 1997 xx€ xx€
88730 88731 Kit joints Kit
pour piston
joints diamètre
pour 80 mm année
piston diamètre après
90 mm 1997
année après 1997 xx€ xx€
88731 88732 Kit jointsKit
pour piston
joints pourdiamètre 90 mm année
piston diamètre après
100 mm 1997
année après 1997 xx€ xx€
88732 88733 Kit joints Kit
pour piston
joints diamètre
pour 100 mm 110
piston diamètre année
mmaprès 1997
année après 1997 xx€ xx€
88733 88734 Kit joints Kit
pour piston
joints diamètre
pour 110 mm 120
piston diamètre année
mmaprès 1997
année après 1997 xx€ xx€
88734 88735 Kit joints Kit
pour piston
joints diamètre
pour 120 mm 130
piston diamètre année
mmaprès 1997
année après 1997 xx€ xx€
88735 88736 Kit jointsde
Resistance pour piston diamètre
chauffage 230v 60w130 mm année
diamètre après
10x65 1997
sortie câble 0.9 m CA100419 xx€ xx€
88736
88737
Resistance de chauffage 230v 60w diamètre 10x65 sortie câble 0.9 m CA100419
Resistance de chauffage 400v 60w diamètre 10x65 sortie câble 0.7 m CA102451 xx€ xx€
88737 Resistance de chauffage 400v 60w diamètre 10x65 sortie câble 0.7 m CA102451 xx€
Pièces hydrauliques
RÉNO-
88749
NO-
N STA
Réference Description Prix
STA
88738
Réference Tube flexible
Description Prix xx€
88738 Tube1 flexible
pouce mini 1 m xx€
88739 Tube1flexible 1 pouce
pouce mini 1 m supplément 1 m xx€
8873988740 Tube flexible 1 pouceTubesupplément
flexible 1 m xx€ xx€
88740 Tube flexible mini 1 m
1 pouce 1/4 xx€
88741 Tube1flexible 1 pouce
pouce 1/4 mini 11/4
m supplément 1 m xx€
8874188742 Tube flexible 1 pouceTube
1/4 supplément
flexible 1m xx€ xx€
88742 1 pouce
Tube 1/2 mini 1 m
flexible xx€
88743 Tube1flexible 1 pouce
pouce 1/2 mini 11/2
m supplément 1 m xx€
8874388744 TubeSupport
flexiblepour
1 pouce
tube1/2 supplément
flexible 1 m 50 mm)
1’’ 1/4 (ext. xx€ xx€
8874488745 Support pourTube
tuberigide
flexible
D.351’’mm
1/4 longueur
(ext. 50 mm)
3m xx€ xx€
8874588746 Tube rigide D.35 mm longueur
Raccord 3m
D.35 mm xx€ xx€
8874688747 Raccord D.35 mm
Raccord D.42 mm xx€ xx€
8874788748 Raccord D.42
Raccord mmD.35 mm
à 90° xx€ xx€
8874888749 Raccord à 90° àD.35
Raccord 90°mmD.42 mm xx€ xx€
8874988750 Raccord
Supportàpour
90° tube
D.42rigide
mm D.35 mm xx€ xx€
8875088751 Support
Tube -pour
huiletube
D. 8rigide D.35Longueur
x 12 mm mm 15 m xx€ xx€
8875188752 Tube - huile D. 8Raccord
x 12 mm1/8 Longueur 15 m
pouces G xx€ xx€
8875288753 Raccord 1/8 pouces
Electro-valve G 35 mm
diamètre xx€ xx€
8875388754 Electro-valve diamètre
Electro-valve 35 mm42 mm
diamètre xx€ xx€
8875488755 Electro-valve
Kit HDU hydraulique diamètreA3
pour amendement 42-mmelectro-valve avec bobine inclus xx€ xx€
88755 à préciser tension bobine - marque de l’unité
Kit HDU hydraulique pour amendement A3 - electro-valve centraleavec
? capacité
bobine de la centrale
inclus xx€
Certifiéde
à préciser tension bobine - marque EN81-2/ 1998+ A3:2009
l’unité centrale ? capacité de la centrale
Certifié EN81-2/ 1998+ A3:2009
H200-088461 H300-088462
REFROIDISSEUR D’HUILE Réference Prix
600483 600484 600485
600483 • Livré avec adaptateurs
600484 600485 88463 xx€
Référence • 2 x 0-10 mètres de tuyau hydraulique
Désignation Prix
Référence • 12,5 kW - 2,5 kW puissance de refroidissement
Désignation Prix
600483 Fixation amortisseur L • Thermostat
: 120 mm (2 équerres + 1m. + 1 boulon et l’écrou du tube) 37,60 €
600483 Fixation réglable
Ressort amortisseur amortisseur L•
système Convient
: 120
de mm Lpour
(2 équerres
fixation +toutes
: 120/330 1m. 1les
mm+ (2 unités
boulon et +
équerres 1hydrauliques
l’écrou du1tube)
m. + boulon et l’écrou 37,60 €
600484 • L’image montrée
Ressort amortisseur réglable système de fixation du
L : tube)
ne peut représenter refroidisseur
120/330 mm (2 équerres + 1 m. + 1 boulon et l’écrou
fourni.
43,60 €
600484 43,60 €
600485 du tube)150 x 200 mm
Semelle amortisseur 13,20 €
600485 Semelle amortisseur 150 x 200 mm 13,20 €
web : www.sta-ascenseurs.com email : sta@sta-ascenseurs.com
1
TélOMAR
: +33 155810774 Fax : +33 148650043
420 Matériel
web : www.sta hydraulique
-ascenseurs.com Tél : +33 1 55 81 07 74 / Fax : +33
email 1 48 65-ascenseurs.com
: sta@sta 00 43
web : www.sta 6 email : sta@sta
Tél : +33 -ascenseurs.com
155810774 Fax :-ascenseurs.com
+33 148650043
6
Tél : +33 155810774 Fax : +33 148650043
Matériel hydraulique
WITTUR OMARLIFT
wITTuR / OMARLIfT
OMARLIFT
GROuPE COmPlET POuR aSCENSEuR HYDRaulIQuE PumP uNIT HE
GROUPE COMPLET UNITÉ CENTRALE
gROuPE COMPLET POuR Pour
• Débit de
AsCEnsEuR
15 àascenseur
600 l/min.
hydRAuLIquE unITE CEnTRALE
Distributeurs à régulation électronique.
hydraulique
• Structure compacte
Distributeurs montée
à régulation sur supports antivibratoire.
électronique.
••Débit
Pompede à15main
à 600 l/min.
pour opération de secours.
••Structure compacteà la
Groupe résistant montée suretsupports
chaleur antivibratoire.
résistance de chauffage en option.
••Pompe à main pour opération de
Réalisations sur mesure disponibles.secours.
• Groupe résistant à la chaleur et résistance de chauffage en option.
•CaRaCTERISTIQuES TECHNIQuES
Réalisations sur mesure disponibles.
CaRaCTERISTIQuES TECHNIQuES
• Distributeur à régulation électronique peu sensible aux fluctuations de températures d’huile et de pressions.
• Augmentation minimale de la température de l’huile durant le fonctionnement, permettant une économie
• Distributeur à régulation
d’ énergie pouvant électronique
atteindre 30% parpeu sensible
rapport auxaux fluctuations
systèmes de températures d’huile et de pressions.
traditionnels.
••Augmentation minimale de la température de l’huile durant le fonctionnement, permettant une économie
Très silencieux.
•d’Isonivelage
énergie pouvant atteindreprécis.
extrêmement 30% par rapport aux systèmes traditionnels. de -10 a -20% d ‘ecart
••Très silencieux.
Grand confort d’utilisation. sur les produits wittur
de -10 à -20% d’écart
••Isonivelage extrêmement précis.
Haut rendement. nous consulter
••Grand confort conçu
Distributeur d’utilisation.
pour le grand trafic.
sur les produits Wittur
• Haut rendement. nous consulter
Référence Désignation • DistributeurDébit
conçu (l/min)
pour le grand trafic. Type de moteur (kW) Capacité (l)
503265
Référence 110/S
Désignation 55-150
Débit (l/min) Type de 4,8-14,7
moteur (kW) Capacité65(l)
503266
503265 135/S
110/S 55-150
55-150 4,8-14,7
4,8-14,7 65100
503267
503266 210/S
135/S 55-210
55-150 4,8-18,4
4,8-14,7 100140
503268
503267 320/S
210/S 100-300
55-210 7,7-29,4
4,8-18,4 140215
503269
503268 450
320/S 180-380
100-300 11,0-36,8
7,7-29,4 215300
503270
503269 680
450 380-600
180-380 14,7-58,8
11,0-36,8 300475
503270 680 380-600 14,7-58,8 475
ValVE DE SECuRITE
VALVE DE HDu CONTRE HDU
SÉCURITÉ lES mOuVEVENTS
ValVEContre
DE SECuRITE
INCONTROlES
les
HDu CONTRE
mouvements incontrôlésDE la lES CabINEmOuVEVENTS
de la cabine
INCONTROlES DE la CabINE
• nouvelle valve de sécurité contre les mouvements incontrôlés de la cabine quand
celle-civalve
• nouvelle est endezone de porte
sécurité et les
contre portes ouvertes.incontrôlés de la cabine quand
mouvements
• celle-ci
Pour lesest
nouvelles
en zone installations ou la modernisation.
de porte et portes ouvertes.
••Pour
extrêment compacte.
les nouvelles installations ou la modernisation.
••extrêment
certifiée en 81-2/a3.
compacte.
• certifiée en 81-2/a3.
En fonctionnement normal, en montée ou en descente, l’électrovalve est électriquement maintenue
ouverte
En et permetnormal,
fonctionnement le flux d’enhuile entre
montée oulaencentrale
descente,et l’électrovalve
le piston. est électriquement maintenue
Si un mouvement
ouverte et permet leincontrôlé estentre
flux d’ huile détecté, le flux d’
la centrale et huile est immédiatement bloqué par la fermeture
le piston.
Si(mécanique)
un mouvement incontrôlé est détecté,
de l’électrovalve. le fluxest
cette solution d’ huile est immédiatement bloqué par la fermeture
parfaitement
(mécanique)
adaptée auxdenouvelles
l’électrovalve. cette solution
installations et aux est parfaitement
modernisations.
adaptée aux nouvelles installations et aux modernisations.
Référence Désignation Débit
Référence Désignation Débit
503271 HDU35 8-35
PRIX SUR DEMANDE 503271 HDU35 8-35
503272 HDU210 25-210
503272 HDU210 25-210
503273 HDU380 250-380
503273 HDU380 250-380
503274 HDU600 500-600
503274 HDU600 500-600
OMARLIFT
web: www.sta-ascenseurs.com
Web : www.sta-ascenseurs.com/ Email : sta@sta-ascenseurs.com
21
email : sta@sta -ascenseurs.com
Matériel hydraulique 421
Prix sur demande
Tél : +33 155810774 Fax : +33 148650043
web : www.sta-ascenseurs.com email : sta@sta-ascenseurs.com
37
STA
FOURNITURES ASCENSEURS
KIT UNIVERSEL A3
Matériel hydraulique
KIT UNIVERSEL A3
Le kit est un système étudié pour éviter le risque d’un
mouvement involontaire de levage hydraulique équipé
d’une soupape de rupture
Le kit est composé de :
1. Un actionneur hydraulique composé de :
1.1 Un accumulateur hydraulique
1.2 Un bloc d’aluminium
1.3 Un pressostat de contrôle
1.4 Une electrovalve de pilotage
1.5 Un manaomètre (optionnel)
1.6 non retour valve sur une partie
Références Désignation
451245 Kit mise sous la norme A3 pour appareil hydraulique
OMARLIFT
422 Matériel hydraulique Tél : +33 1 55 81 07 74 / Fax : +33 1 48 65 00 43
Matériel hydraulique
GMV
Groupes électrogènes
Unités de valve
«DRY»
FEATURES
2CH safety system in compliance with the A3 Amendment to EN 81.2 standards POWER UNITS
Fluitronic Components
Further comfort when traveling downwards.
Fluitronic
Compliant with the new Machine Directive, thanks to the double safety closure and to the
Components
A3 Amendment to EN 81.2 standard.
Groupe électrogènes
Ideal for new installation or modernisations.
3100 card
Monitoring of the valve block control signals to implement the downward control of the lift.
dment to EN 81.2 standards
Reduces
Quick and easy installation; can be modified to fit the electrovalve travel
VMP/2CH andtime,
3010.increases traffic capacity of the power unit and gives an efficient ride quality.
It is possible to reach 1 m/s with the 3010 mechanical valve group.
Allows increase in the number of travels/hour with the same travel times.
Easy adjustment with the programming pad.
the double(1) For
safety closure
further information and
contact GMV to
mainthe
office. It constantly monitors the oil temperature and regulates valves to maintain the ride
Photo: System 2CH
quility.
The acceleration ramp is not altered.
Soft-Stop The control board can be directly installed on the power unit (recommended) or into
ment the downward control of the lift. the control panel.
It consists of a modified VB latch mechanism located inside Itthe consists of and
valve unit an electronic
a circuit (3100-E2), a pressure transducer (3100 PT), a
temperature
modified VMP electrovalve with double hydraulic circuit, which enables transducer
to adjust the and a programming unit (3100 PM).
stop, thus providing a higher level of comfort to the users (softerRecommended
stop). for hotels, factories and public buildings.
electrovalve VMP/2CH and 3010.
To ensure its correct operation the controller must be adjusted. Recommended for
Technical features
hotels, high standard buildings and hospitals (stretcher lifts). Highest comfort.
odel GL HL F1 MRL-T
• Max. static
Model pressure (full load): 45 bar T2 T3 T4
• Min. static pressure (empty):
€ 12 bar Photo: 3100 control card
• Oil€ temperature: €
mbols € € Symbology 10 - 70ºC
• Minimum
Photo: System 2CH distance betweenNEWthe stop and deceleration contacts:
• ≤ 0,63 m/s 1,10 m Residential and Special Special
Installations Photo: Soft-Stop commercial
sallations Système
Residential and Residential and Residential and≤ 1 m/s Residential
1,60andm buildings installations installations
Matériel hydraulique
GMV
AGE JACKS
c Components
PRIX DE 10 À 15% SUR PRIX DU MARCHÉ
1001 1001 SL (Slim) Vérin 1 étage
1008 1008 SL (Slim)
€ €
Direct lateral 1:1 Direct lateral 1:1 Indirect 2:1 Indirect 2:1
Up to 2 Up to 2 Up to 8 Up to 8
from 120 to 150 from 60 to 110 from 120 to 238 from 60 to 110
Model 9100 9101 9110
5, 6, 7.5 and 10 5, 7.5 and 12 5, 6, 7.5, 10, 12 and 14 5, 7.5 and 12
Symbols
Decreases installation area required for short travel Extremely versatile
1001 1001 SL (Slim) 1008
HL 6000
Synchronisation
1000 1000 SL (Slim)
Hydraulic Hydraulic Hydraulic 1008 SL (Slim)
€ Liquide respectueux de € Vérin SL
€ €
m) Up to 75 Available stages
from 120 to 238 from 60 to 110 2 3 2
Main advantages: from 120 to 150 from 60 to 110 from 120 to 238 from 60 to 110
m) Up to 7.5
Model 5, 6, 7.5, 10, 12 and 14 5, 7.5 and 12 9111 TCS EC
• Reduced oil requirements.
Diameter (mm) 42 - 100 5, 6, 7.5 and 10
• Quick and simple assembly which is due to the design of the cylinder connections.
5,42
7.5- and
100 12 5, 6, 7.5, 10, 12 and50
14 - 100 5, 7.5 and 12
ge Symbols Under
Specific for HL and HL DRY • Greater compatibility with reduced-size power units.
ground Under ground
control unit • Standard products are readily available for dispatch
Decreases installation area required for short travel Extremely versatile
Guide • Competitive price. Included Included Included
Synchronisation Hydraulic Mechanical Mechanical
ronmentally friendly fluid Design for long travels and panoramic installations. Design
Main advantage SL1:1
(SLIM) Jack €
Traction Direct central Direct lateral 1:1 Direct lateral 1:1
odegradable (1)
TELESCOPIC JACKS
Stroke (stops)
nthetic basis enables greater stability thanks to its high viscosity
Up to 8Maximum space optimisation
Up to 8 Photo: Piston 1008 SL
Up to 8
Fluitronic Components
ersus the conventional oil. Its flash point is higher than 250º C,
red to 216° C of mineral oils. This hydraulic fluid is classified
Flex piping
Vérins téléscopiques
Main advantages:
13
according to the ISO 6743-4 Regulations.Stages availables 3 2-3 2-3-4
• Reduced oil requirements.
• Quick and simple assembly which is due to the design of the cylinder connections.
plies with the Environmental Directive 2006/118/CE
Diameter (mm) in synthetic rubber,
Flexible piping 42with
coated
• Greater compatibility with reduced-size
- 100one or two
• Standard layers
products areof high
readily
60 power
-for
120
resistance
available
units.
dispatchspiral metal meshes, withCâble souple
60 - an
120
d in compliance with the CEC L33-A-93 Standard external layer of synthetic rubber. • Competitive price.
Available lengths: from 1,5m to 25m with Included
Guide increments of 0,5m. Included Included
Fittings: steel 9S Mn Pb 28.
Technical features 13
Model
Rigid
9100 piping
Working temperature: from - 40°C to + 100°C.
9101 9110
Piping dimensions: 3/4” (90º, DN 19), 1” (DN 25), 1” (DN 32), 1” (DN 40), 2” (DN 50).
Symbols 2” (DN 50) flex piping supplied with two fittings of 2”.
The complete
Minimum bendingconnection
ratio: frompiping
160 tois630
supplied Câble
mm. on the basis of the arrangement of the jack cylinder. rigide
Synchronisation Rigid piping
Minimum
Hydraulic with pressure:
explosion fitting and lock360
from
Hydraulic ringtoSeries L. Hydraulic
400 bar.
Developed
Max. in 5m sections.
working pressure in compliance with standard EN 81.2 - §12.3.2.1: from 45 to 50 bar.
Roping Direct side acting 1:1 Direct side acting 1:1 Direct central acting 1:1
Technical features:
Stops Up to 6 Up to 6 Up to 6
e Matériel hydraulique
Environment
(1)
In optimal conditions and in combination with other GMV products
losure in compliance with the new Machine Directive 2006/42/CE and the
d
pliance with the 81.70 Standard, thanks to NGV valve
GMVKIT
CONVERSION
€ NEW
nward speed
PRIX FLASH SUR DEMANDE Photo: NGV programming console
Kits faciles
gradability index > 90%. In compliance with the 2006/118/CE Directive on
A set of components specifically designed for 2:1 MRL hydraulic lifts
Conversion Kit main advantages:
(machine room less), in compliance with the
• Kit installation without changing the power unit.
standards in force 81.2, A2. Ideal for modernisations. • Kit suitable for all power units up to 210 L/min.
her GMV products • The programming console provides easy adjustments.
• Better easier adjustment thanks to the programming console.
• Installation in less than 2 hours.
The Kit A2 consists of: • It includes programmable electronic pressure switch.
• Adjustable regular speed.
€ NEW • Travel comfort comparable to an VVVF traction lift .
• In compliance with Standard 81.2 A2 and A3.
• Fluitronic power unit MRL-T • Integrated double safety system.
• NGV/3010 electronic valve unit • Higher floor levelling accuracy in compliance with Standard
• 81.70 due to NGV valve.
on the market into• NGV
1008(digital
SL jacks Photo: NGV programming console; NGV valve
technology). • Possibility of using environmentally friendly fluid.
• UNION 2:1 car frame
• Mechanical device for the lower
Photo: clamping
NGV programming console of the cabin (LCSMD)
Kits de remplacement
Photo: Control unit GL DRY Photo: NGV valve, digital technology Photo: Interfacing card Photo: Environmentally friendly fluid
power unit.
210 L/min. Main advantages of Kit A2:
easy adjustments. 24
he programming• console.
Total use of the hoistway: no external spaces are occupied
• Standard adjustments from the outside through the programming console.
c pressure switch.• It doesn’t require structural calculations.
• Better comfort and levelling precision.
VVF traction lift . • Minimum height of the pit reduced.
allations
A2 and A3. • Low noise level thanks to its location.
• Power installed reduction up to 40%.
mpliance with Standard
• Speed up to 1m/sec.
• Mechanical device for the lowerPhoto:
clamping of the cabin.
NGV programming console; NGV valve
friendly fluid. Control unit with mechanical valve unit. Control unit with Conversion Kit
pecifically designed for 2:1 MRL hydraulic lifts (machine room less), in compliance with the
A2. Ideal for modernisations.
MRL-T
valve unit 25
t A2:
26
27
GMV
Web : www.sta-ascenseurs.com / Email : sta@sta-ascenseurs.com Matériel hydraulique 425
Matériel hydraulique
Moris
Unités de puissance
électrique Groupes électrogènes
Vérin
Moris
426 Matériel hydraulique Tél : +33 1 55 81 07 74 / Fax : +33 1 48 65 00 43
PIÈCES DE MARQUE BUC
BUCHER
VANNES PRINCIPALES
VANNES PRINCIPALES VANNES PRINCIPALES
VANNES VANNES
VANNES
499120 PRINCIPALES
PRINCIPALES
PRINCIPALES
499121 499122 499123 499124 499125
Référence Désignation
499120 Type LRV
499121 IWK, 6m
499122 IWK, 9m
499123 WAGO
120
122 499121
499123 499120 499122 499125 499122 499124
499124 499121 499123 499126 499123 499125 499124 499126 499125 499126
499124 LRV-A-1, 175
e Désignation 499120
Référence
499120 499121
499121Désignation 499122
499122 499123499123
PrixDésignation 499124 499124Prix 499125
499125 499126 499126
Prix
499125 LRV-A-1, 350
Référence
Référence
499120 Type LRV Désignation Type LRV
Type LRV Désignation Prix Prix
499126
499120499120
499121 IWK, 6m IWK, 6m Type
IWK,LRVType LRV
6m
499122499121
499121 IWK, 9m IWK, 9m IWK,
IWK, 6m
9mIWK, 6m
WAGO 499122
499122
499123 WAGO WAGO IWK, 9m PLAQUES DE SUPPORT
IWK, 9m
499124499123
499123
LRV-A-1, 175 LRV-A-1, 175 WAGO WAGO
LRV-A-1, 175
499124499124
499125
LRV-A-1, 350 LRV-A-1, 350 LRV-A-1,
LRV-A-1, 350 175
LRV-A-1,175
499125
499126499125 LRV-A-1,
LRV-A-1, 350 350
499126499126
PLAQUES DE SUPPORT
PLAQUES DE SUPPORT PLAQUES
PLAQUES
499127 DE499128
DE SUPPORT
SUPPORT499129 499130 499131 499132
PLAQUES DE SUPPORT
PLAQUES DE SUPPORT
127
29 499128 499127499131
499130 499129 499128499130
499132 499133 499130 499132 499134
499129 499131 499131 499133 499132 499133 499135
499127499127 499128499128 499129499129 499130
499130 499131499131 499132499132 499133499133
Référence Désignation
499127 LRV-1- 175-350-700
499128 0 -160bar
499129 Valve descente LRV-1-175-350-700
499130 Valve montée LRV-1-175-350-700
499134 499135 499134 499131 499135 499135
Valve montée LRV-1-175-350
e Désignation
Référence 499134499134
Désignation Prix 499135499135
Prix Prix
APPAREILS
APPAREILS
APPAREILS
APPAREILS D’ESSAI Désignation
D’ESSAI
Référence D’ESSAI
D’ESSAI
APPAREILS D’ESSAI Prix
499139 LRV-1, VF-LRV
Référence
Référence
Référence Désignation
Désignation
Désignation Prix
Prix
Prix
499140
Référence EPROM V2.100
Désignation Prix
499139
499139
499139 LRV-1,
LRV-1,VF-LRV
LRV-1,
VF-LRV
VF-LRV
499139 LRV-1, VF-LRV
499139 499140 499140
499140
499140 EPROM
EPROMV2.100
EPROM
V2.100
V2.100
499140 EPROM V2.100
499139
499139
499139 499140
499140
499140
DIVERS
499139 499140
DIVERS
DIVERS
DIVERS
DIVERS
DIVERS
499141
499141
499141 499142
499142
499142 499143
499143
499143 499144
499144
499144 499145
499145
499145
499141 499142 499143 499144 499145
499146
499146
499146 499147
499147
499147 499148
499148
499148 499149
499149
499149
499146 499147 499148 499149
Référence Désignation Prix
Référence
499141
499141
Référence
Référence
499142
Référence
Pressosthat
Pressosthat haute pression Type DZ, 20-90bar
Désignation
Désignation
Désignation
Pressosthat
haute
basse pression Type DP, 0-10bar
Désignation
pression Type DZ,
PIÈCES DE MARQ Prix
Prix
Prix
Prix
499141
499141 Pressosthat
Pressosthat haute
hautepression
pression Type
Type DZ,20-90bar
DZ,20-90bar
20-90bar
499143
499141 Pressosthat electronique avechaute
Pressosthat deux points
pressiondeType
commutations
DZ, 20-90bar ajustables DZE, 0.5 - 100bar
499142
499142
499142 Pressosthat
Pressosthat
Pressosthat basse
basse pression
basse pression Type
pressionType DP,
Type DP,0-10bar
DP,0-10bar
0-10bar
499143
499143
499144
499142
499143 Pressosthat electronique
Pressosthat
Pressosthat
electroniqueavec
electroniqueavecdeux
avec
Cable pour
Pressosthat
deux points
deux
basse
points
points
Pressosthat
pression Type
dedecommutations
de
commutations
TypeDP,
commutations
DZE, 6m
0-10bar
ajustables
ajustables DZE,
ajustablesDZE,0.5
0.5-0.5
DZE, 100bar
- 100bar
- 100bar VF-PIÈCES
PIÈCES DE MARQUE BUCHER
499145
499143 Pressosthat electronique avec deux points Pompede manuelle
commutations Type ajustables
EHP10 DZE, 0.5 - 100bar
499144
499144
499144 Cable
Cablepour
Cablepour Pressosthat
pour Pressosthat
PressosthatType
Type DZE,
TypeDZE, 6m
DZE, 6m6m
499146
499144 Huile
Cableadditive de frictionOil
pour Pressosthat Typeadditive
DZE, 6m for less friction Type DEA68, 5 litres
499145
499145
499145 Pompe
Pompe
Pompemanuelle
manuelle Type
manuelle TypeEHP10
Type EHP10EHP10
499147
499145 Boite de pièces
Pompe éléctroniques
manuelle Type EHP10 de rechange
499146
499146
499146 Huile additive
Huile
Huile
additivededefrictionOil
additive defrictionOiladditive
frictionOiladditiveforforless
additive for
less friction
lessfrictionType
friction DEA68,
Type
Type
DEA68, 5 5litres
DEA68, litres
5 litres
499148
499146 Pièces mécaniques
Huile additive de frictionOil additive for de lessrechange
friction Type DEA68, 5 litres
499147
499147
499147
499149
499147
Boite
Boitede
Boite pièces
dedepièces VF-PIÈCES
éléctroniques
pièces éléctroniques de
éléctroniques
DVD pourde
Boite de pièces éléctroniques
rechange
dede rechange
rechange
entrainement
rechange
499148
499148
499148 Pièces
Pièces mécaniques
Pièces mécaniques
mécaniques de rechange
dederechange
rechange