Académique Documents
Professionnel Documents
Culture Documents
Numerical Index
MODEL PAGE MODEL PAGE MODEL PAGE MODEL PAGE MODEL PAGE
C28221-810 43 25351-020 44 94117 32 615005-B 23 636027 39
C28241-810 43 25361-020 44 94420 29 615008 23 636028 39
F30-BK 42 26341-020 44 94421 29 615014 23 636030 39
F25221-110 43 26351-020 44 94422 29 615019 23 636037 39
F25241-110 43 26361-020 44 100067 44 615020 23 636039 39
L26221-110 43 27344-000 44 104077-X 42 615020-1 23 636042 42
L26241-110 43 27354-000 44 104173 44 615026 22 636043 42
LM22XX-XX 12, 14 27364-000 44 125121-000 43 615028 22 636046 39
LM23XX-XX 12, 14 28343 44 126121-000 43 615029 22 636053 40
LP200X-X 14 28353 44 127122-000 43 615101 36 636054 40
LP300X-X 14 28363 44 128121-300 43 615154 38 636060 40
LP2100-0 12 29077 44 129121-404 43 622201-XX 33 636065 39
LP3100-0 12 29623 44 611001 26 622401-XX 33 636075 34
PD20A-XX 7 29668 44 611002 26 622651-XX 33 636077 34
P29221-610 43 29850 44 611016 26 622701-6 28 636080 34
P29241-610 43 60345 39 611019 23 622702-XX 28 636083 34
R27221-600 43 60430 39 611112 25 623401-XX 33 636084 34
R27241-600 43 60713 19 611116 25 623501-XX 33 636085 34
Y17-XX 47 60798 37 611117 25 624201-XX 33 636086-B 34
Y27-XX-C 46 60870 30 611118 25 624401-XX 33 636087-B 34
Y26-1 42 61113 30 611170 25 624502-XX 33 636088 34
Y28-1 42 61117 31 611174 26 624506-2-F 19 636089 34
Y28-2 42 61118 31 611406 39 624601-XX 33 636101 38
Y43-X-C 46 61124 42 612041-X 8, 10 628004-XX 45 636103 38
Y43-XX-C 46 61409 27 612042-X 8, 10 628020-XX 45 636111 38
Y43-XXX-N 46 61412 27 612721 15 628023-XX 45 640015-X 29
Y44-XXX 46 61412-1 27 612722 13 628067-XX 33 640027 29
Y45-XXX 46 61431-X 21, 24 612729 13 629212 37 640038 31
Y45-XXX-C 46 615002-B 24 612805 15 629226 37 640049 40
Y167-3 47 615052 24 612913-1 10 629245-X 35 640056 41
Y167-X 47 61580 24 612913-3 10 629516 37 640057 41
676 34, 46 61601 27 612999-3 9 629521 37 640058 41
1950 46 61754 42 612999-4 21 629713 39 640058-2 41
2074 34, 47 61879 32 612999-5 21 629737 38 640062 41
2085 34 61880 32 612999-6 22 629742 38 640067 30
2087 40 62133 30 613100-1 8, 48 635003 45 640091 29
2648 34 65845 42 613104 48 635040 31 640095-X-B 29
2722 46 65986 27 613201-2-C 48 635101 37 640108 41
3249 34, 47 65986-1 27 613117-B 48 635106 34 640110 39
4148 30 66100 30 614306 20 635107 34 640149 41
4280 46 66101 30 614306-X 20 635108 34 640152 29
4295 47 66480 28 614400-1 19 635117 34 640152-1 29
4566 47 66492 29 614400-2 19 635129 35 640153 31
4616 47 66559 42 614400-3 19 635131 35 640162 29
6000 40 66592 42 614400-4 19 635141 37 640164 29
6001 40 66593 42 614400-5 19 635142 37 640165 29
6002 40 66779 27 614400-6 19 635143 37 650709-C 17
6004 40 66779-2 27 614400-11 19 635148 37 650710-C 17
6005 40 66815-1 29 614400-12 19 635153 37 650711-C 17
6006 40 67086 31 614400-13 19 635154 37 650715-C 9
6007 40 67088 30 614400-14 19 635184-3 37 650717-C 17
6009 40 67145-X 30 614400-15 19 635190-X 35 650718-C 17
6010 40 70749 46 614400-16 19 635193 35 650719-C 17
6011 40 71027 29 614610-00A 18 635363 36 651830 28
6013 40 71060 29 614612-XXA 18 635364 36 662400-C 15
6026 40 71377 39 614612-XXB 18 635365 36 662402 15
6028 40 71449 46 614613-XXA 18 635367 36 662409 13
6029 40 71838 47 614613-XXB 18 635369 36 662410-B 13
6035 40 72177 46 614613-XXC 18 635370 36 662420-B 13
6041 40 73581 46 614614-XXA 18 635377-B 36 662605 15
6045 40 753XX 46 614620-00A 18 635378 36 662606 15
6056 40 76493 46 614624-XXA 18 635381 36 662608 15
6060 40 76751 46 614624-XXD 18 635382 36 662609 15
6069 40 76763 30 614624-XXE 18 635383 36 666053-XXX 7, 21
6070 40 76880 46 614624-XXF 18 635384 36 666056-6A4 7
6786 37 77617 46 614624-XXG 18 635390-XX 35 666100-XXX-C 7, 21
6788 46 90717 46 614630-00A 18 635391-11 35 666150-XXX-C 7
6847 47 91020-X 27 614632-XXA 18 635392 35 67088-3 30
7444-K 45 91790 32 614632-XXH 18 635395-2 35 67088-4 30
8338 45 92021 47 614633-XXA 18 635399 35
8338-1 45 92022 47 614633-XXH 18 636003 39
8440 45 92818 42 614633-XXJ 18 636019 40
23644-400 31 93188 19 615002-B 24 636020 40
25341-020 44 94085 32 615003-B 23 636024 40 51
Table of Contents
AIR CHUCK ................................................................................................45 GREASE PUMPS...........................................................................14, 15, 16
AIR LINE FILTERS / REGULATORS/LUBRICATORS ........................43, 44 HAND TRUCKS..........................................................................................41
AIR MOTOR MUFFLERS...........................................................................32 HOSE, AIR..................................................................................................33
ANTIFREEZE PUMPS .........................................................................7, 8, 9 HOSE, MATERIAL......................................................................................33
ARO-STOP .................................................................................................31 HOSE REELS.......................................................................................18, 19
BALL CHECK UNIONS ..............................................................................42 IN-LINE METERS .......................................................................................37
BLOW GUNS..............................................................................................45 LIFTS ..........................................................................................................30
BULK GREASE PUMP PACKAGES ..........................................................16 LOW-LEVEL CUTOFF................................................................................31
BUNG ADAPTERS .....................................................................................30 LUBE CONSOLE........................................................................................20
COILED AIR HOSE ....................................................................................45 NUMERICAL INDEX....................................................................................51
CONTROL HANDLES, DIGITAL ................................................................35 OIL PUMPS..............................................................................10, 11, 12, 13
CONTROL HANDLES, HIGH PRESSURE ................................................38 OVERRUN CONTROLS.............................................................................31
CONTROL HANDLES, METERED FLOW .................................................36 PRESSURE RELIEF VALVE/KIT ...............................................................31
CONTROL HANDLES, NONMETERED ....................................................35 PUMPS, OIL.............................................................................10, 11, 12, 13
DIAPHRAGM PUMPS ..........................................................................6, 7, 9 PUMPS, GREASE..........................................................................14, 15, 16
DOLLIES.....................................................................................................41 PUMPS, ANTI-FREEZE .......................................................................7, 8, 9
DRAINS, WASTE OIL ....................................................................22, 23, 24 REDUCING ELBOWS ................................................................................46
DRUM COVERS.........................................................................................29 SIPHON HOSE...........................................................................................28
FILTER / REGULATOR / LUBRICATORS (AIR)...................................43,44 SIPHON TUBE ...........................................................................................27
FILTER SCREENS .....................................................................................28 SWIVELS....................................................................................................34
FITTINGS, GREASE ..................................................................................40 TIRE FILL PUMPS .....................................................................................48
FLUID CONTROL VALVES........................................................................42 U.L. APPROVED PUMPS ..........................................................................17
FLUID COUPLERS.....................................................................................47 WALL MOUNTS .........................................................................................30
FOLLOWER PLATES.................................................................................29 WASH PUMPS ...........................................................................................48
FUEL PUMPS (U.L. APPROVED)..............................................................17 WASTE OIL DRAINS .....................................................................22, 23, 24
GREASE GUN ADAPTERS .......................................................................39 WASTE OIL EVACUATION SYSTEMS .....................................................21
GREASE FITTINGS ...................................................................................40 WHIP HOSE ...............................................................................................38
GREASE FITTING COUPLERS.................................................................40 WINDSHIELD FLUID PUMPS......................................................................7
Reels, Cabinets,
Consoles
Pgs. 18-20
Meters, Control
Handles, Nozzles
Pgs. 35-36
Gear Oil
Pump Lifts Solvents
Pg. 30
Chassis
Grease
Transmissio
n Fluid
Gear Oil
Waste Oil
Anti-Freeze
3
Typical Quick-Lube
Installation
EQUIPMENT ROOM
11 11 11
11
6 14
1 9 5 6
AIR COMPRESSOR
12 8 13
10
17
CHASSIS
4 MOTOR OIL
2 WINDSHIELD 6
SOLVENT GEAR OIL ATF (From bulk
3 MIXTURE 16 tank) 18
7 15
20 19
14
12
1
Model 66605J-344 Model LM2305A-41 Model LM3005-1 Model 666100-322-C
1:1 Ratio 5:1 Ratio, 3” Air Motor 50:1 Ratio, 3” Air Motor 1:1 Ratio
13 Gallons Per Minute 9 Gallons Per Minute 7.5 Pounds Per Minute 35 Gallons Per Minute
(Free Flow) (Free Flow) (Free Flow) (Free Flow)
1. Pump - 8. Siphon Tube Assembly - 13. Single Post Lift - 17. Pump -
66605J-344 66779 with 1-1/2” (F) X 1” 640067 (400# Service) LM2305A-11
2. 1/2” Air Line Filter - Reducing Bushing 14. Pump - 18. Wall Mount Bracket -
F25241-110 9. 1/4” I.D. Air Hose - LP3005-1 (400# Service) 61113
3. 1/2”Material Hose - 622201-3 LP3002-1 (120# Service) 19. 1-1/2” I.D. Material Hose -
623501-4 10. Siphon Tube Assy - 15. Chassis Pump Inlet Screen - By Others
4. Wall Mount Bracket - 61409 640039 (Not Pictured) 20. 1” Pipe Swivel Union -
76763 11. Air Line Filter/Regulator - 16. Follower Plate Assy - 75368 with 1-1/2” (F) x 1” (m)
P29221-A04 640015-1 (400# Service) Reducing Bushing
5. Pump - LM2305A-11
(Gauge Included) 640165 (120# Service)
6. Wall Mount Bracket - (Included With LP3002-1)
61113 12. Pump -
LM2305A-41
7. 1-1/2” I.D. Material Hose (55 Gal. Service)
(By Others) ★ Pressure Relief Valve - Kit - 61118.
4
CABINET STYLE HOSE REELS Service Area
REEL MODELS REEL ENCLOSURES
Hose Control Handle Service Model
Service Model Size I.D. Length (Included) 1 (reel) 614400-11
Air 614612-25B 1/4” 25’ 635003-Air Chuck 2 614400-12
Water 614613-25C 3/8” 25’ 635131-Water Bibb 3 614400-13
Gear Oil 614624-25D 1/2” 25’ 635390-11-Metered 4 614400-14
Motor Oil 614624-25E 1/2” 25’ 635390-2-Metered 5 614400-15
ATF 614624-25F 1/2” 25’ 635390-2-Metered 6 614400-16
Oil/ATF 614624-25G 1/2” 25’ 635391-1-Non-Metered
Chassis 614632-25H 1/4” 25’ 636111-High Pressure Control
PIT AREA
9 WASTE OIL SYSTEM
1. 1” Diaphragm Pump - 6. Fluid Connector -
666100-322-C 92022
4 6 2. Wall Mount Bracket - 7. Fluid Coupler -
66100 92021
3. 1/4” Air Hose - 8. 1” I.D. Material Inlet Hose -
5 7 622201-3 628066-6
4. Air Line Filter/Regulator, Gauge - 9. Rollaway Drain -
129121-A04, 29850 615029
3 5. 1” I.D. Material Outlet Hose - 28-5/8” (Wide), 20-1/4” (long), 14-7/8” (deep)
615026
628067-6 34” (Wide), 24” (long), 10-7/8” (deep)
8
1
Aro’s Bryan, Ohio facility, where our ARO Diaphragm Pumps are
diaphragm pumps are manufactured, is backed by a generous 5-year
registered by Underwriters Laboratories warranty on materials and
Inc. to ISO 9001 Quality Standards. workmanship for your
purchasing peace of mind.
Aro’s patented “unbalanced” To reverse the valve, air For Safety, Reliability and Ease of
major air valve has constant air pressure is supplied to the
pressure applied to its small larger end of the valve,
Assembly: Bolted Is Better
end. This assures that the allowing the valve to shift - ARO Diaphragm Pumps feature bolted
pump resets. Competitive note that constant air construction to avoid the proven
designs lose their signal during pressure continues to be problems created by clampband type
every shift, making them applied to the small end. pump fasteners. These include material
vulnerable to stalling. spills and leaks, bolt loosening and
breakage due to poor joint integrity,
and difficult reassembly.
The Advantages of ARO
Air-Operated Diaphragm Pumps
Pumping Efficiency Remains Constant
Since ARO Diaphragm Pumps contain no rotors, gears, vanes or pistons to
wear out – there is no gradual decline in pump performance. And the Aro
“Unstallable” air valve uses less power to operate than competitive brands.
No Complex Controls
Unlike electric pumps, ARO Diaphragm Pumps contain no wires, circuits,
fuses or by-pass controls to burn out and replace.
6
MATERIALS OF CONSTRUCTION MAXIMUM
GALLONS AIR FLUID
DIAPHRAGM (liters) INLET USED
MODEL BALL & O-RING RATIO PER MINUTE (NPT) WITH Diaphragm Pumps
1/2-inch Fluid Ports NPT(F) Antifreeze,
polypropylene body 100 psi (6.9 bar) max. Windshield Fluid,
666053-344
666053-322
Teflon
Buna-N
Teflon
Buna-N
1:1
1:1
13 (49)
13 (49)
1/4 (F)
1/4 (F)
✲
✲
Cleaning Solvents, Oils,
*66605J-388 Polyurethane Polyurethane 1:1 13 (49) 1/4 (F) ✲
Transmission Fluid
*Lower priced single piece manifolds The 1/2-inch pumps on this page can be conveniently
mounted with the 76763 wall
groundable pump 100 psi (6.9 bar) max. mount bracket. The 1-inch pumps utilize
the 66100 wall mount bracket.
conductive acetal wetted body parts polypropylene center body (See page 30 for further details)
666056-6A4 Acetal Teflon 1:1 13 (49) 1/4 (F) Solvents
Electrically-conductive model for handling solvent-based, potentially hazardous fluids.
Includes grounding strap.
666100-XXX-C
2-inch Fluid Ports NPT(F)
aluminum body 120 psi (8.0 bar) max.
PD20A-AAP-GGG Geolast Geolast 1:1 170 (644) 3/4 (F) ✲
✲ For general use with windshield fluid, motor/gear oil, transmission & antifreeze fluid.
Muffler NOT
MATERIAL COMPATIBILITY: Some automotive service fluids can be delivered by different pumps which vary in included.
their materials of construction. The pump/fluid matchups on this page are Aro's recommendations for the fluids listed. See page 32.
For additional details on material compatibility, refer to the ARO Fluid Compatibility Guide, Form 8677-P.
666150-XXX-C
PD20A-XXX-XXX
7
*WORKING FLOW *FREE FLOW
@ 90 PSI INLET @ 120 PSI INLET SEE CHART
PRESSURE PRESSURE BELOW FOR
GALLONS GALLONS AIR FLUID FLUID REFERENCE TO
(liters) (liters) INLET INLET OUTLET ACCESSORIES
Piston Pumps MODEL RATIO PER MINUTE PER MINUTE (NPT) (NPT) (NPT) INCLUDED
*IMPORTANT: "Working Flow" represents performance that can be expected from a pump at 90 psi,
in a typical system. "Free Flow" figures are for comparison purposes only. Under normal operating
conditions, air inlet pressures should be set in the 40 to 90 psi range for higher operating efficiency
and longer pump life.
For information on Aro's complete line of accessories, see pages 27 through 47.
8
MATERIALS OF CONSTRUCTION MAXIMUM
GALLONS AIR
DIAPHRAGM (liters) INLET
MODEL BALL SEAT & O-RING PER MINUTE (NPT) Diaphragm Pump
1-inch Fluid Outlet NPT(F) 50/50 AntiFreeze/
aluminum body 120 psi (8.0 bar) max.
650715-C Acetal Polypropylene Buna-N 35 (132) 1/4 (F)
Water Blending
This 1:1 ratio, one-inch diaphragm pump has dual
inlets (3/4-inch NPTF) to allow simultaneous pumping
and blending of antifreeze and water. It can be
mounted conveniently with the 66100 wall mount
bracket. (See page 30 for further details)
650715-C
9
*WORKING FLOW *FREE FLOW
@ 90 PSI INLET @ 120 PSI INLET SEE CHART
PRESSURE PRESSURE BELOW FOR
GALLONS GALLONS AIR FLUID FLUID REFERENCE TO
(liters) (liters) INLET INLET OUTLET ACCESSORIES
Piston Pumps MODEL RATIO PER MINUTE PER MINUTE (NPT) (NPT) (NPT) INCLUDED
*IMPORTANT: "Working Flow" represents performance that can be expected from a pump at 90
psi, in a typical system. "Free Flow" figures are for comparison purposes only. Under normal
operating conditions, air inlet pressures should be set in the 40 to 90 psi range for higher
612042-1 operating efficiency and longer pump life.
Convenient Dispensing!
612913-3
Basic Pump Accessories Included
REFERENCE MODEL
NUMBER NUMBER DESCRIPTION PAGE
3 60870 BUNG ADAPTER (consists of 60869 adapter 30
and Y197-158-C screw)
4 – BUNA-N PACKINGS
5 – TEFLON PACKINGS
6 – THIOKOL LEATHER PACKINGS
7 – POLYETHYLENE PACKINGS
8 92818 NEEDLE VALVE 42
9 612913-1 TAPPER 10
For information on Aro's complete line of accessories, see pages 27 through 47.
10
Introducing Thunder
A Pump with Striking Design and Powerful Performance. This is what the lubrication
professional wants, and with Thunder, this is what the lubrication professional gets. From
the pump maker that knows the lube business better than anyone: ARO.
SERIES PUMPS
• RELIABLE - Thunder features a stall-free, ice-free air motor design (patents applied
for) contained in a rugged housing that will withstand most working environments.
• THE RIGHT PRICE - Through advanced designed technology, Thunder rolls through
manufacturing faster than any pump on the market. With speed comes economy -
which we’re rolling on to you.
• FEWER PARTS - Thunder pumps are constructed with 50%fewer parts than the
majority of comparable pumps. Install Thunder and see for yourself how fewer parts
translate into fewer headaches when it comes to service or routine maintenance.
• IN-LINE SERVICE - You can service Thunder right where it stands; avoiding the
costly tear-down/removal/replacement cycle that most pumps require.
• ALL - WEATHER PUMPING - Thanks to its unique bung adapter design, by adding
an optional seal kit, P/N# 67088-X (see page 30), Thunder can be used outdoors or
in, with complete confidence, making it perfect for lube rig installation.
11
MODEL WORKING FREE AIR FLUID CONTAINER
NUMBER FLOW FLOW INLET INLET/ SIZE
Piston Pumps MAX.
GPM
MAX.
GPM
NPT(F) OUTLET
NPT(F)
Transmission Fluid Each pump includes Bung Adapter #67145-3-B (Non-weather tight).
LM2203A-11-B (-12-B = BSP thread) 6 9 1/4” 3/4 / 1/2 Stub
LM2203A-31-B (-32-B = BSP thread) 6 9 1/4” 3/4 / 1/2 16-Gallon
LM2203A-41-B (-42-B = BSP thread) 6 9 1/4” 3/4 / 1/2 55-Gallon
LM2203A-51-B (-52-B = BSP thread) 6 9 1/4” 3/4 / 1/2 275-Gallon
Note: For weather tight Bung Adapter order 670883-3. Includes 67145-3- bung adapter or 67088 seal kit.
SERIES PUMPS Basic Pumps, 5:1 Ratio, 3” Diameter Air Motor (3-inch stroke)
Each pump includes Bung Adapter #67145-4-B (Non-weather tight).
LM2305A-11 (-12 = BSP thread) 6 9 1/4” 1-1/2 / 1/2 Stub
LM2305A-31 (-32 = BSP thread) 6 9 1/4” 1-1/2 / 1/2 16-Gallon
3:1 Oil
LM2305A-41 (-42 = BSP thread) 6 9 1/4” 1-1/2 / 1/2 55-Gallon
5:1 Oil
LM2203A-11-B LM2305A-11
LM2305A-51 (-52 = BSP thread) 6 9 1/4” 1-1/2 / 1/2 275-Gallon
Note: For weather tight Bung Adapter order 67088-4. Includes 67145-4-B bung adapter 67088 seal kit.
LP2100-1-B
LP3100-X-1
12
H erv
S
ea ic
*WORKING FLOW *FREE FLOW
@ 90 PSI INLET @ 120 PSI INLET
vy e
PRESSURE PRESSURE
GALLONS GALLONS AIR FLUID FLUID
MODEL
(liters)
PER MINUTE
(liters) INLET
PER MINUTE (NPT)
INLET
(NPT)
OUTLET
(NPT)
CONTAINER
SIZE
Piston Pumps
Basic Pump 9:1 Ratio, 4-1/4” Diameter Air Motor (4”Stroke) Motor/Gear Oil,
662420-B
662409
662410-B
3.9 (14.8)
3.9 (14.8)
3.9 (14.8)
21 (79.4)
21 (79.4)
21 (79.4)
1/2 (F)
1/2 (F)
1/2 (F)
2 (F)
Immersed
Immersed
3/4 (F)
3/4 (F)
3/4 (F)
Stub
16-Gallon
55-Gallon
Transmission Fluid
The Series 425 supply pumps are designed
for direct mounting to standard containers
or to 61113 and 66100 wall mounts. See page 30.
*IMPORTANT: "Working Flow" represents performance that can be expected from a pump at 90
psi in a typical system. "Free Flow" figures are for comparison purposes only. Under normal
operating conditions, air inlet pressures should be set in the 40 to 90 psi range for higher operating
efficiency and longer pump life.
612722 55-GALLON OIL/ATF PACKAGE - Includes 662410-B Pump with L26241-110 Air
Lubricator, 621501-05 Air Hose (5’), 623501-08 Material Hose (8’) and 60870 Bung 612729
Adapter.
662410-B
Let ARO take the time and expense out of specifying the right parts with
the right pump. ARO Systems And Packages arrive at your door with all
the needed parts and components ready to go. Typically all you need to
do is stage your material, attach the material and air lines and you’re up
and running - - ASAP Style!
13
MODEL WORKING FREE AIR * FLUID CONTAINER
NUMBER FLOW FLOW INLET SIZE
Piston Pumps LBS..
PER MIN.
LBS.
PER MIN.
NPT(F) OUTLET
NPT(F)
*Note: Single actions not recommended for use on hose reels. (Only 60:1)
SERIES PUMPS
Note: For weather tight applications order 67088
LP2002-1 35-lb. GREASE PACKAGE- Same contents as LP2001-1 package, also includes
72290 Adapter, 624201-10 Material Hose (10’), 636077 Z-Swivel and 636111
Standard Gun.
LP2003-1 120-lb. GREASE PACKAGE - Includes LM2260E-31-B Pump, 94421 Drum Cover,
640162 Follower Plate.
LP2004-1 120-lb. GREASE PACKAGE - Same contents as LP2003-1 package, also includes
72290 Adapter, 624201-10 Material Hose (10’), 636077 Z-Swivel and 636111
Standard Gun.
LP2006-1 120-lb. GREASE PACKAGE - Same contents as LP2004-1, except includes 640058-
2 Dolly.
IMPORTANT: The 60:1 ratio grease packages listed above have a maximum air inlet pressure of 125 PSI.
LP3001-1 (3” Air Motor)
LP2002-1 (2” Air Motor) 50:1 Ratio, Grease, 3” Diameter Air Motor
LP3001-1 35-lb. GREASE PACKAGE- Includes LM2350E-21-B Pump, 94420 Drum Cover,
Containers and Air
Connectors shown NOT with 94334 Handle, 640095-2-B Follower Plate, also includes 624201-10 Material
LP3003-1 (3” Air Motor) included Except LP3007-1 Hose (10’), 636077 Z-Swivel, 76493 Adapter, and 636103 Booster Gun.
LP2006-1 (2” Air Motor) (Includes Container).
LP3002-1 120-lb. GREASE PACKAGE - Includes LM2350E-31-B Pump, 94421 Drum Cover,
640165 Follower Plate, 624401-4 Material Hose(4’), and 622201-3 Air Line Hose
(3’).
LP3007-1
(3” Air Motor) LP3003-1 120-lb. GREASE PACKAGE - Includes LM2350E-31-B Pump, 94421 Cover,
624201-10 Material Hose (10’), 636077 Z-Swivel, 640057 Dolly, 636103 Booster
Gun, 640165 Follower Plate, and 76493 Adapter.
LP3005-1 LP3005-1 400-lb. GREASE PACKAGE - Includes LM2350E-41-B Pump, 94422 Drum Cover,
(3” Air Motor) 624401-4 Material Hose (4 ft.), 622201-3 Air Line Hose (3 ft.). Order FollowerPlate
640015-1 when required.
LP3007-1 60-lb. GREASE PACKAGE- Includes LM2350E-61-B Pump, 71740-1 Drum with
Cover and Tie Down Brackets, Portable Hand Cart, 636111 Control handle and
624401-4 Material Hose (4’).
14
IMPORTANT: The 50:1 ratio grease packages listed above have a maximum air inlet pressure of 150 PSI.
H rvi
ea c
Se
vy e
MAXIMUM
POUNDS
(kilograms) AIR FLUID FLUID
PER MINUTE INLET INLET OUTLET ACCESSORIES
MODEL RATIO @ 90 PSI (NPT) (NPT) (NPT) INCLUDED Piston Pumps
Basic Pumps Grease
120-pound drum, 4-1/4” diameter air motor (4-inch stroke) NLGI #0 thru #3
These pumps are ideal where high pressures are
662402 50:1 6 (2.7) 1/2 (F) Immersed 1/2 (F) Pump Only
demanded. When higher viscosity lubricants are being
400-pound drum, 4-1/4-inch diameter air motor (4-inch stroke) pumped, follower plates (page 29) help maintain a
good pump prime and continuous material flow .
662400-C 50:1 6 (2.7) 1/2 (F) Immersed 1/2 (F) Pump Only
Basic Pumps
120-pound drum, 6-inch diameter air motor (4-inch stroke)
662605✦ 100:1 2.1 (.8) 1/2 (F) Immersed 1/2 (F) F/R/L C28241-810
662400-C
Model Package Description
Heavy Service Grease Pump Packages
Grease
50:1 Ratio, Grease, 4-1/4” Diameter Air Motor
612721 400-LB. GREASE PACKAGE - Includes 662400-C Pump, 621501-05 Air
Pump Packages
Hose (5’), 624401-8 Material Hose (8’), 4148 Bung Adapter.
15
MAXIMUM
POUNDS
(kilograms) AIR FLUID FLUID
Piston Pumps MODEL RATIO
PER MINUTE
@ 90 PSI
INLET
(NPT)
INLET OUTLET
(NPT)
NP646F01-1 HIGH FLOW - HIGH PRESSURE, 46:1 BULK GREASE PACKAGE - Includes
650692-P43-B Pump with same components listed in the NP4230F01-1 package
above.
NP6460F01-1
Bulk Tanks
Not Included
67216-1 4-1/4”, 50:1, 662402 (HEAVY SERVICE) PUMP TUBE ADAPTER - See 67216-2
67216-1
description above.
67216-2
16
MATERIALS OF CONSTRUCTION MAXIMUM
GALLONS AIR
* NOTE: Certain fuel additives may be chemically incompatible with Buna-N. Please check
chemical compatibility guides if questionable.
650710-C
✦NOTE: To meet UL 79 specifications, pumps utilize pressure relief valves to limit dispensing
line pressure to under 50 psi.
If line pressure between the pump and dispensing point exceeds 50 psi due to thermal expansion,
line compression, backfeed, or gravity, the pressure relief valve opens and bleeds off excess
pressure. The relief valve must be plumbed to return the bleed-off fuel to the storage container. 650711-C
Chassis Grease
614630-00A No hose – reel only **5,000 (345) – –
614632-XXA 1/4 2-wire 1/4 (90°) x 1/4 624212 **5,000 (345) – 1
614632-XXH 1/4 2-wire 1/4 (90°) x 1/4 624212 **5,000 (345) 636111 1, 7
614633-XXA 3/8 2-wire 1/2 (90°) x 3/8 624405 4,000 (276) – 2
614633-XXH 3/8 2-wire 1/2 (90°) x 3/8 624405 4,000 (276) 636111 2, 6
614633-XXJ 3/8 2-wire 1/2 (90°) x 3/8 624405 4,000 (276) 636101 2, 8, 10
** If reel is used at 5,000 psi, the 624506-2-F connecting hose cannot be used.
18 For information on Aro's complete line of accessories, see pages 27 through 47.
MODEL TYPE DESCRIPTION Hose Reel Accessories
Cabinet Enclosures
614400-11 1 Reel For use with 6146XX open-style reels. Constructed of high-impact
Hose Reels
614400-12 2 Reel polymer. Cabinets come complete with frame, side panels, Cabinets and Mounting Hardware on this page
614400-13 3 Reel mounting channel and hardware.
are for reels on previous page.
614400-14 4 Reel
614400-15 5 Reel
614400-16 6 Reel
Connecting Hose
624506-2-F – Flexible hose provides connection from piping to reel inlet for
grease, motor oil, gear oil and transmission fluids. 1/2-inch I.D., 30
inch (762 mm) long hose has 1/2-inch (M) and 1/2-inch (M) 90°
fittings. Maximum pressure - 4,000 psi (276 bar).
614400-2
Cabinet Labels
93188 – PEEL AND STICK LABELS – One each as shown below. Labels
are 7/8-inch high x 5-3/16-inch long with 1/2-inch high lettering.
60713
19
Lube Service Console MODEL DESCRIPTION
614306-1 Same as 614306 except without windshield fluid containers. Sides are flat –
10-9/16-inches wide.
Use 61988-1 hose stops for oil controls and 5671 hose stops for air and water
controls.
614306-2 Same as 614306 except with windshield fluid container on one side only. Unit
is approximately 18-3/8-inches wide.
614306
40-11/16 (1038)
26-1/4
(667)
10-9/16
(268) 5-9/32
(134)
Cabinet Labels
93188 PEEL AND STICK LABELS – One each as shown below. Labels are 7/8-inch high x
3/8 DIA. 5-3/16-inch long with 1/2-inch high lettering.
29 (734) 5-27/32
6 MTG.
(148)
HOLES
4-25/32
(121)
20
MATERIALS OF CONSTRUCTION MAXIMUM
GALLONS AIR
Diaphragm Pump
DIAPHRAGM (liters) INLET
MODEL BALL SEAT & O-RING PER MINUTE (NPT) Packages
Basic Pump 1/2-inch Fluid Ports NPT(F) Waste Oil
polypropylene body 100 psi (6.9 bar) max.
666053-322 Nitrile Polypropylene Nitrile 13 (49) 1/4 (F)
Evacuation
Packages
Basic Pump 1-inch Fluid Ports NPT(F)
aluminum body 120 psi (8.0 bar) max.
666100-322-C Nitrile Polypropylene Nitrile 35 (132) 1/4 (F)
21
Pit-Type and
Floor Rollaway Drains
Pit-Type Drain
Waste Oil Drains Drains designed for pit use. Heavy-duty top screen holds down splash and keeps drain plugs and tools
out of pan. Quick disconnect coupler on drain pans hook up to hose to carry waste oil to storage tank.
NOTE: Rollers are 2-1/2” from top of pan.
ROLLER ADJUSTMENTS
CAPACITY WIDTH LENGTH DEPTH MINIMUM MAXIMUM
GALLONS INCHES INCHES INCHES INCHES INCHES
MODEL (liters) (mm) (mm) (mm) (mm) (mm)
615029 30 28-5/8 20-1/4 14-7/8 32-1/16 42-1/16
(113.6) (726) (514) (378) (814) (1068)
615026 30 34 24 10-7/8 36-7/16 47-7/8
(113.6) (864) (609) (276) (925) (1216)
615028
612999-6
22
LOWERED RAISED
POSITION POSITION CAPACITY
INCHES INCHES GALLONS
MODEL (mm) (mm) (liters) DESCRIPTION Portable Drains
Drum-Type Drain
615005-B 35 48 5 PORTABLE OIL DRAIN – Five-gallon
Waste Oil Drains
(889) (1219) (9) tank has convenient carrying handle and
adjustable funnel height.
615003-B 39 62 16 OIL DRAIN – Use with 16-gallon drum.
(991) (1575) (61) Has adjustable funnel height, drum cover
and oil level gauge. Drum not included.
615014 – – 16 OIL DRUM – 16-gallon drum with drain
(61) valve. (For dolly options, see page 42.)
Portable-Type Drain
615019 41 69 16 WASTE OIL "HANDLER" – Includes
(1041) (1753) (61) 615003-B adjustable drain/cover
assembly, 615014 16-gal. drum with
shutoff valve, and 640058-2 4-caster 615019 615003-B
band dolly.
615019-1 41 69 16 Same as 615019 except with extra large
(1041) (1753) (61) funnel 67203 (6” deep x 21”dia.).
615008 39 62 16 PORTABLE OIL DRAIN – Includes
(991) (1575) (61) 615014 oil drum, 615003 oil drain, and
640149 three-wheel cart.
615020 – – 16 OIL DRUM - Use with 16-gallon drum.
(61) has fluid connector 92021 on cover with
siphon tube and 640058-2 dolly. for use
with 612999-4 or -5 waste oil evacuation
packages.
615020-1 – – 16 Same as 615020 except with extra large
(61) funnel 67203 (6” deep x 21”dia.).
615020
Note: See page 21 for 612999-4 or-5 waste oil evacuation package.
615008 615019-1
23
LOWERED RAISED
POSITION POSITION CAPACITY
Pedestal Oil Drains MODEL
INCHES
(mm)
INCHES
(mm)
GALLONS
(liters) DESCRIPTION
615002-B
Drain Adapter
615052 DRAIN ADAPTER - Use with pedestal oil drain 615002-B. Fits drum or standpipe
with 2-inch NPTF(F).
67203
24
MODEL RATIO DESCRIPTION Hand-Operated Pumps
Motor Oil, Gear Oil, Transmission Fluid Motor Oil,
16 to 55-gallon (adjustable)
611117 --- Telescoping intake pipe adjusts for 16- to 55-gallon drums. Spring-loaded
Gear Oil,
tube snaps back when pump is removed from container. Fits 2-inch bung
opening. Pump output adjustable for 1 quart or 1 liter per cycle. Transmission Fluid
611118 --- Telescoping intake pipe adjusts for 16- to 55-gallon drums. Double-acting
pump delivers fluid on each stroke, up to 20 GPM. Fits 2-inch bung
opening. 3/4-inch I.D. x 8-foot long HOSE IS GASOLINE RESISTANT.
55-gallon
611112 Adjustable – Fits 2-inch bung opening or adapter. 5 feet (1.5 m) of 1/2-inch I.D.
2:1, 4:1, 7:1 621512-5 outlet hose.
611116 --- Fits 2-inch bung opening or adapter. T-handle, plunger actuation.
Delivers approximately 1 pint per stroke.
Outlet thread: 3/4 inch – 11-1/2 inch garden hose type thread.
611117
Gear Oil
5-Gallon 611118
611170 Adjustable: Capable of high-volume delivery. Includes 621597-5 hose/dispensing
2:1, 4:1, 7:1 nozzle assembly [5 foot(1.5 m), 1/2-inch I.D. hose] and 72006
drum cover.
16-Gallon
611019-3 Adjustable: Metered dispenser includes 72096 drum cover bung adapter, 621502-5
2:1, 4:1, 7:1 hose nozzle assembly [5 foot(1.5 m), 1/2-inch I.D. hose] and 635190-1
digital meter. Accepts 640058-2 dolly. Order separately or see
611019-31.
611019-4 Adjustable: Includes 72096 drum cover bung adapter, 621502-5 hose dispense
2:1, 4:1, 7:1 nozzle assembly [5 foot(1.5 m), 1/2-inch I.D. hose] accepts 640058-2
dolly. Order separately or see 611019-41.
611019-X 611116
Transmission Fluid
16-gallon
611019-2 Adjustable: Metered dispenser 72096 bung type drum cover with [7 foot, 1/2-inch I.D.
2:1, 4:1, 7:1 hose] 621512-7 hose assembly 629244 hose/non drip nozzle assembly
635101 filter and 635190-2 digital meter.
Quick-Fill Pump
104157 Quick-Fill pump is a fast convenient way to fill button head fittings on
machinery. Unit comes complete with pump, container, 6 ft. hose and 611170 104157
(Container not included.)
button head connector. Container has a full-opening cover with a button
head fitting on the lid to drain hose of undischarged lubricant.
25
Hand-Operated Pumps MODEL DESCRIPTION
Lubrication Pumps
Grease
NLGI #0 thru #3 35-pound
611001 CHASSIS LUBRICATOR – High-pressure, portable unit with full-opening cover
develops up to 4500 psi (310 bar). Includes 35-pound container, 4286 follower
plate, and 623402-05 hose/hydraulic adapter assembly.
611002 CHASSIS LUBRICATOR – Same as 611001 except with longer (7’) hose.
611001 611016 BALL JOINT LUBRICATOR – Can deliver up to 1/4-ounce of lubricant per
stroke. Includes 72006 drum cover, 622511-10 hose assembly, 72051 follower
plate and 72806 booster control handle. Control handle capable of generating
up to 7,500 psi.
611174
26
MODEL DESCRIPTION PUMPS USED WITH Siphon Tubes
5-Gallon Containers
65986 Siphon tube has 6-foot long (1.8 m), Wall-mounted stub pumps
Accessories
3/4 I.D. hose with 3/4 NPT(M) outlet.
Hose is Neoprene over Thiokol and
includes 91020-1 tube.
91020-1 1/2-inch galvanized suction tube for 5-gallon 1/2-inch diaphragm pumps and stub
containers. (16” long) pumps
65986-1 Siphon tube has 6-foot long (1.8 m), Drum cover for closed drum w/
3/4 I.D. hose with 3/4 NPT(M) outlet. 2-inch bung opening
Hose is Neoprene over Thiokol.
91020-1
61601 Speeds 55-gallon drum change-over. Wall-mounted stub pumps
No need to handle pump. Includes
622651-06 hose, Y45-24-C adapter
bushing, Y43-5-C street elbow and 65109
(36” long), carbon steel suction tube.
3/4-inch NPT(F) fluid outlet.
66779 For pumping from 55-gallon drum. PVC Stub pumps and diaphragm pumps
tube has foot valve for positive priming.
Includes 76193 bung adapter, adjustable
to approximately 35-1/2-inches. 1-inch
NPT(F) fluid outlet. 61601
61409 For pumping from 55-gallon drum. 1/2-inch diaphragm pumps and
90° PVC siphon tube, 35-1/2-inches stub pumps
(901.7 mm) long with 2-inch bung adapter
for 55 gallon drums. Can easily be cut
to desired length, on site. 1/2-inch NPT(F)
fluid outlet.
275-Gallon Containers
66779-2 For pumping from 275-gallon tanks. PVC Stub pumps and diaphragm pumps
tube has foot valve for positive priming.
Includes 76193 bung adapter, adjustable
to approximately 48-1/4-inches. 1-inch NPT(F)
fluid outlet.
27
HOSE HOSE
SIZE I.D. LENGTH FLUID FLUID
Siphon Hoses MODEL
INCHES
(mm)
FEET
(mm)
HOSE
MATERIAL
INLET
NPT(M)
OUTLET
NPT(M) USED WITH
Siphon Hose
Accessories
Carbon Steel Fittings
622701-6 1 6 Nylon tube with 1 1 Carbon steel siphon tube
(1.8) oil-resistant cover
66480 Filter and check valve assembly Used with suction tubes when fluid is
constructed of 316 Stainless Steel, corrosive and viscosity requires a foot
assembly has 1-inch NPT(F) connections valve for positive priming.
and 40-mesh screen. 4-3/4-inch (121 mm)
long x 2-1/8-inch (54 mm) in diameter.
66480 651830
28
O.D. of
WIPER SEAL PUMP TUBE
MODEL MATERIAL TO BE FITTED PUMPS USED WITH Follower Plates
35-pound Tapered Pail (Fits 10 - 11” ID Drums)
640095-1-B Rubber 1 Thunder 60:1
Accessories
640095-2-B Rubber 1-1/2 611406, Thunder 50:1
640095-3-B Rubber 2 Hand pumps
Single-Post Lift
Accessories 640225 Air operated lift for 16 gallon/ Thunder Series Models
120# container size. LM2260E-31
Extended height 62 inches(1.6m). LM2350E-31
Suggested drum cover 94421. LM2305A-31
Piston Pumps
61113 2-inch NPT(F) opening for bung 55-gallon bung type pumps and
type pumps. Bracket can slip Series 200, Thunder and 425 stub
over rim of open-head drum or pumps fitted with bung adapters.
be wall-mounted.
61113 66100 Wall mount bracket has Series 425, 4-inch stroke pumps.
removable mounting plate.
66101 Wall mount bracket has Series 425, 6-inch stroke pumps
removable mounting plate
Bung Adapters
4148 2-inch (M) for use with Series 425, 50:1 ratio grease pumps
1-7/8-inch siphon tube
60870 2-inch (M) for use Series 200, 1:1 ratio immersed pumps;
with 2-1/8-inch siphon tube Series 425, 9:1 ratio immersed pumps; Series
600, 100:1 ratio pump for 400 lb. drum
67145-X 67145-1 2-inch (m) Thunder Series, 60:1 grease pumps
67145-2 2-inch (m) Thunder Series, 50:1 grease pumps
67145-3-B 2-inch (m) Thunder Series, 3:1 oil pumps
67145-4-B 2-inch (m) Thunder Series, 5:1 oil pumps
67086
31
SIZE
INLET INCHES x INCHES
Air Motor Mufflers MODEL NPT(M) PUMPS USED WITH (mm x mm)
61879
Diaphragm Pumps
1/2 70 60 71.1
1 70 60 64.5
1-1/2 70 60 77.7
91790
2 70 60 85.0
3 70 50 83.0
The pump sound pressure levels published above have been updated to an Equivalent Continuous Sound Level
(LAeq) to meet the intent of ANSI S1.13-1971. CAGI-PNEUROP S5.1 using four microphone locations.
Diaphragm pumps were tested with their standard muffler.
32
FITTING MAX.
THREAD PRESSURE
MODEL I.D. O.D. BOTH ENDS PSI (bar) LENGTH High-Pressure Hose
Buna-N Tube, Neoprene Cover
1-wire braid
Accessories
In selecting a hose, be sure the hose material is
623401-XX 3/8 25/32 3/8 NPT(M) 2,250 (155) 5,7,10,25,50 compatible with the fluid being pumped and that the
623501-XX 1/2 29/32 1/2 NPT(M) 2,000 (138) 4,8,15,25,50 maximum working pressure will not be exceeded in
the application. Only those hose length options
2-wire braid listed with each model are available. Substitute -
XX with -5, -15, -25 etc., to indicate length selection.
624201-XX 1/4 11/16 1/8 NPT(F) 5,000 (345) 2,6,10,12,15,20,25,50 (Example: Substitute -XX with length selection, such
624401-XX 3/8 27/32 3/8 NPT(M) 4,000 (276) 4, 8, 25, 40, 50 as -50. If length is single digit, use that digit only.
624502-XX 1/2 31/32 1/2 NPT(M) 3,500 (241) 15, 25, 50 Do not add zeros.)
624601-XX 3/4 1-1/4 3/4 NPT(M) 2,250 (155) 4,10,25
Elastomer Tube, Polyester Cover
1-wire braid
628067-XX 1 1-1/4 1 NPT(M) 800 (55) 3, 5
Low-Pressure Hose
Neoprene Tube, Neoprene Cover
2-fabric braid
622401-XX 3/8 3/4 1/4 NPT(M) and 300 (21) 15, 50
1/2 NPT(M)
622651-XX 3/4 1-3/16 3/4 NPT(M) 600 (41) 4, 5, 6, 10, 15
33
THREAD SIZE MAXIMUM
INCHES TYPE OF PRESSURE
Swivels MODEL NPT X NPT SEALS PSI (bar)
"Z" Swivel
Accessories 636077 1/8 (M) x 1/8 (F) Fabric with Neoprene 8,000 (552)
The swivels on this page give the operator mobility 636080 1/8 (M) x 1/4 (F) Fabric with Neoprene 8,000 (552)
and flexibility when using fluid control handles. 636084 1/4 (F) x 1/8 (F) Fabric with Neoprene 8,000 (552)
Do not install swivels in systems where they 636086-B 1/4 (F) x 1/4 (M) Fabric with Neoprene 5,000 (345)
will be subjected to fluid pressures higher than 636087-B * 1/4 (F) x 1/4 (M) Fabric with Neoprene 5,000 (345)
their ratings. 636083 1/8 (F) x 3/8 (F) Fabric with Neoprene 8,000 (552)
636088 3/8 (M) x 3/8 (F) Fabric with Neoprene 8,000 (552)
636089 3/8 (M) x 3/8 (F) Thiokol Leather 8,000 (552)
635106 1/2 (F) x 3/8 (M) Fabric with Neoprene 8,000 (552)
*Includes an internally mounted 65809-5 filter element.
Straight Swivel
636075 1/8 (M) x 1/8 (F) Fabric with Neoprene 8,000 (552)
636077
2085 1/8 (M) x 1/8 (F) Fabric with Neoprene 8,000 (552)
636085 3/8 (M) x 3/8 (F) Fabric with Neoprene 8,000 (552)
635117 1/2 (M) x 1/2 (F) Fabric with Neoprene 2,000 (138)
635117 w/ adpt. 70749 1/2 (M) x 1/2 (M) Fabric with Neoprene 2,000 (138)
635108 3/4 (M) x 3/4 (F) Buna N 1,000 (69)
635107 1/2 (F) x 3/8 (M) Fabric with Neoprene 2,000 (138)
636075
635108
Conversion Fittings
Female Adapter
2074
3249 1/8 (F) x 1/8 (F) 8,000 (552)
2074 1/8 (F) x 1/4 (F) 8,000 (552)
676
Male Adapter
676 1/8 (M) x 1/8 (M) 8,000 (552)
2648 1/8 (M) x 1/2-27 (M) 8,000 (552)
34
MAXIMUM
WORKING FLUID
Non-Metered
PRESSURE INLET FLUID
MODEL DESCRIPTION PSI (bar) NPT (F) OUTLET Fluid Control Handles
Motor Oil, Gear Oil, Transmission Fluid
Accessories
high-volume
635193 Has flexible rubber hose with non-drip nozzle. 600 (41) 3/4 71893
Use with 1:1 and 3:1 pumps. Non-drip tip
635193
635395-2 Has flexible rubberhose with non-drip nozzle. 900 (63) 3/4 71893
635399
Use with 5:1 and 9:1 pumps. Non-drip tip
standard volume
635392 Has flexible rubber hose, built-in swivel 1,000 (69) 1/2 60164
and filter, and non-drip nozzle. Non-drip tip
635399 Has flexible rubber hose, built-in swivel, 1,000 (69) 1/2 70790
and right-angle non-drip nozzle. Non-drip tip
635392 635131
Water, Anti-freeze
635129 Radiator bibb 300 (21) 1/4 Non-drip tip
Digital, Metered
635131 Radiator bibb. Has 300 (21) 1/4 Non-drip tip
neoprene spout. Fluid Control Handles
MAXIMUM MAXIMUM
FLOW METER/ WORKING FLUID
Our new metered control handle features
RATE TOTALIZING PRESSURE INLET FLUID a patented oval gear wheel design for
MODEL GPM (LITERS) INCREMENTS PSI (bar) NPT (F) OUTLET precise reliable measurement. Its digital
LCD readout operates on two standard
Metered, Rigid Nozzle Models
alkaline batteries.
635390-11 4 (15) Pints/Gals. 1,000 (69) 1/2 Non-drip tip
635390-22 4 (15) Quarts/Gals. 1,000 (69) 1/2 Non-drip tip • Lightweight • Precise
635390-33 4 (15) Liters/Liters 1,000 (69) 1/2 Non-drip tip • Fast Reset • Totalizes
Meter Only
635190-1 4 (15) Pints/Gals. 1,000 (69) 1/2
635190-2 4 (15) Quarts/Gals. 1,000 (69) 1/2
635190-3 4 (15) Liters/Liters 1,000 (69) 1/2
635378 One liter per Liters Non- 1,000 (69) 1/2 90° Non-
revolution From 1 to 4 Totalizing drip tip
635370 635381 8 pints per Pints Totalizing 1,000 (69) 1/2 90° Non-
revolution From 1 to 8 Pints drip tip
635382 8 pints per Pints Non- 1,000 (69) 1/2 90° Non-
revolution From 1 to 8 Totalizing drip tip
635383** 4 quarts per Quarts Totalizing 1,000 (69) 1/2 Flex hose w/
635381 revolution From 1 to 16 Gallons non-drip tip
635365 Set to desired Gallons Totalizing 1,000 (69) 1/2 Non-drip tip
quantity - auto- From 1 to 60 Gallons (9/16-inch dia.)
matically shuts off.
635367 Set to desired Liters Totalizing 1,000 (69) 1/2 Non-drip tip
quantity - auto- From 1 to 60 Liters (9/16-inch dia.)
matically shuts off.
635369 Set to desired Quarts Totalizing 1,000 (69) 1/2 Non-drip tip
quantity - auto- From 1 to 16 Quarts (1/2-inch dia.)
635365 635363 matically shuts off.
Water, Antifreeze
Preset unit automatically shuts off when set quantity
of fluid is delivered and meter indicator returns to preset, metered flow control
zero. Totalizer registers up to 9,999 units.
635363 Set to desired Quarts Totalizing 1,000 (69) 1/2 Non-drip tip
quantity - auto- From 1 to 60 Quarts (9/16-inch dia.)
matically shuts off.
36
MAXIMUM
WORKING FLUID
DIAL TOTALIZING PRESSURE INLET FLUID
MODEL INCREMENTS INCREMENTS PSI (bar) NPT (F) OUTLET In-Line Fluid Meters
Motor Oil, Gear Oil, Transmission Fluid
635141 Pints, from 1 to 8 Pints 1,000 (69) 1/2 (F) 1/2 (F)
Accessories
In-line fluid meter allows operator to
635142 Pints, from 1 to 8 Non-totalizing 1,000 (69) 1/2 (F) 1/2 (F) monitor fluid volume being dispensed
without the additional weight of a meter on
635143 Quarts, from 1 to 16 Quarts 1,000 (69) 1/2 (F) 1/2 (F) the dispensing valve.
635148 Liters, from 1 to 4 Non-totalizing 1,000 (69) 1/2 (F) 1/2 (F)
635153 Liters, from 1 to 10 Liters 1,000 (69) 1/2 (F) 1/2 (F)
635154 Quarts, from 1 to 16 Gallons 1,000 (69) 1/2 (F) 1/2 (F)
635184-3* Pints, from 1 to 8 Pints 1,000 (69) 1/2 (F) 1/2 (F)
635154
MAXIMUM
FLUID LENGTH WORKING
MODEL DESCRIPTION
INLET
NPT
INCHES
(mm)
PRESSURE
PSI (bar) Non-drip Nozzle/Hose
Motor Oil, Gear Oil, Transmission Fluid
629212 Non-drip nozzle/hose 3/4 (M) 12 900 (62)
(305)
6786
FLUID
INLET FLUID
MODEL DESCRIPTION NPT (F) OUTLET In-Line Filter
Transmission Fluid
635101 For use in the material line carrying automatic transmission 1/2 (F) 1/2 (M)
fluid to the dispensing point. Used with control handles
and in-line meters.
635101
37
High-Pressure MAXIMUM
WORKING FLUID
PRESSURE INLET FLUID
Grease Control Handles MODEL DESCRIPTION PSI (bar) NPT OUTLET
636101 Dispenses lubrication at line pressure for 7,500 (517) 3/8 (F) 11/16 – 16(M)
lubricating grease fittings. Does not include or 1/8 NPT(F)
nozzle or hydraulic coupler. (See page 47.)
For applications requiring high flow capacity.
Remove the 1/8 (M) x 3/8 (M) adapter for
3/8 (F) porting.
636111 Dispenses lubricant at line pressure for 7,500 (517) 1/8 (M) Hydraulic
lubricating grease fittings. Includes inlet or 3/8 (F) Coupler
material filter and curved nozzle with
hydraulic coupler. Remove the 1/8 (M) x
3/8 (M) adapter for 3/8 (F) porting.
636103 High-pressure booster handle delivers line 7,500 (517) 1/8 (M) Hydraulic
pressure for normal lubrication. Trigger or 3/8 (F) Coupler
booster feature delivers 10,000 PSI (689 bar)
to break loose tougher fittings. Includes curved
nozzle with hydraulic coupler, inlet material
filter and manual pressure vent for easy
disconnection. WARNING: Do not use
with whip hose! For additional application
guidelines see page 50.
636111
Whip Hoses for Grease Control Handles
636101 WARNING: Not for use with 636103 high-pressure booster handle!
For additional application guidelines, see page 50.
629742 Extra-long, wire braid (624201-02) whip hose 5,000 (345) 1/8 (F) 636046
with hydraulic coupler and swivel. Overall Hydraulic
length 29-1/2-inches (749 mm). For use with Coupler
636111 high-pressure control
handle. Allows operator to access
hard-to-reach fittings.
629737 Whip hose, 7-inches (178mm) long. 5,000 (345) 1/8 (F) 1/8 (M)
636103
629737
629742
38
Hand-Operated Pumps,
MODEL RATIO DESCRIPTION Air-Operated Oiler
ARO-PAK® Self-Contained Lubricators
5-pound capacity
640110 ARO-PAK - Holds 5 lbs. medium pressure lubricant and 40 PSI air prime
for portability. Air pressure helps dispense lubricant. Includes 4 feet
(1.2 m) of 1/2-inch I.D. hose and high pressure control handle. 7500 PSI
(517 bar) maximum pressure.
611019-1
Filler Pumps
640110
35-pound
611406 6:1 FILLER PUMP – Used to fill grease guns and 640110 ARO-PAK.
Includes drum cover, follower plate, dust cap, and chain.
NOTE: Metal follower, use in straight sided pails only. For optional
tapered pail followers see page 29.
120-pound
611019-1 Adjustable FILLER PUMP – Used to fill grease gun and 640110 ARO-PAK 71377
2:1, 4:1, 7:1 Includes72096 drum cover, dust cap and chain (640027 Follower plate
not included). Order separately. See page 29.
Filler Valves
60345 Used to convert competitor filler pumps to fill ARO-PAK lubricator model
640110. 3/8-inch NPT(F) thread inlet. 60345
611406
Filler Adapter
71377 Converts air-operated grease guns and hand-operated grease guns to
filler-type loading capability. 1/8-inch NPT(M) thread.
Grease Fitting
Service Tools MODEL DESCRIPTION
636054 636054 Four function tool: 1) easy-out for removing broken fittings; 2) 1/4-inch-28 tap;
3) 5/16-inch socket for removing hydraulic fittings; and 4) 3/8-inch socket for removing
40 hydraulic fittings.
MODEL DESCRIPTION Dollies, Hand Trucks
Dollies
Accessories
35-pound Pail
640108 Band-type dolly has four rubber-wheeled casters and screw clamp.
16-gallon Drum
640057 Platform-type dolly has four swivel casters and three drum clamps. For use with
steel or fiber drums. 640108
640058 Band-type dolly has four creeper style swivel casters and screw clamp. For use with
steel or fiber drums.
640058-2 Band-type dolly has four rubber-wheeled casters and screw clamp. For use with
steel or fiber drums.
640057
640058-2
Hand Trucks
16-gallon Drum
640062 Two-wheel truck has clamp rod and two base supports to hold drum. Wheels are
rubber.
640149 Three-wheel truck includes hinged handle, swivel-type front wheel and two 6" rubber
rear wheels. Pictured on page 23 with 615008 portable oil drain.
55-gallon Drum
640056 Three-wheel truck made of heavy gauge steel. Includes hinged handle, swivel-type
caster, and two cast iron wheels.
640062 640149
640056
41
INLET/ WORKING
OUTLET BODY SEAT PRESSURE
Fluid Control Valves MODEL NPT MATERIAL MATERIAL PSI (bar)
Plug Valves
61754 Y28-1 1/4 (F) Brass – 150 (10)
Y28-2 1/8 (F) Brass – 150 (10)
Needle Valves
636042 1/2 (F) Carbon Steel Leather 8,000 (552)
66592 636043 1/2 (M) x 1/2 (F) Carbon Steel Leather 8,000 (552)
92818 1/4 (F) x 1/4 (M) Brass Leather 125 (9)
Globe Valves
Y26-1 3/4 (F) Brass Graphite 125 (9)
Y28-1
Ball Valves
104077-2 1/4 (F) Nickel Plated Brass Teflon 225 (16)
104077-3 3/8 (F) Nickel Plated Brass Teflon 225 (16)
104077-4 1/2 (F) Nickel Plated Brass Teflon 225 (16)
104077-2
MODEL DESCRIPTION
F30-BK
WORKING
BODY BALL SEAT INLET OUTLET PRESSURE
Fluid Ball Check Unions MODEL MATERIAL MATERIAL MATERIAL NPT NPT PSI (bar)
65845
42
CAPACITY
FILTER
ELEMENT
MAXIMUM
INLET
Air Line Filters,
INLET OUNCES IN FLOW PRESSURE
MODEL NPT(F) BOWL (milliliters) MICRONS SCFM PSI (bar) Regulators, Lubricators
Miniature
FILTER SUMP
Accessories
Filter CAPACITY
125121-000 1/4 Polycarbonate .6 (18) 20 12 200 (14)
Regulator (29850 gauge not included. See pg. 44) pressure range of regulator: 5 - 125 p.s.i.
Heavy-Duty
Accessories
Filter
Limited selection shown – for more information on the 25341-020 1/2 Polycarbonate 10 (295) 40 82 200 (14)
entire line of quality ARO filters, regulators and w/guard
lubricators, please refer to Aro catalog 9340-R. 25351-020 3/4 Polycarbonate 10 (295) 40 87 200 (14)
w/guard
25361-020 1 Polycarbonate 10 (295) 40 88 200 (14)
w/guard
Lubricator
27344-000 26341-020
26341-020 1/2 Polycarbonate 10 (295) 40 65 200 (14)
w/ guard
26351-020 3/4 Polycarbonate 10 (295) 40 75 200 (14)
25341-020 w/ guard
Regulator shown with optional 100067 gauge. 26361-020 1 Polycarbonate 10 (295) 40 75 200 (14)
w/ guard
28353
PRESSURE
LENS RANGE THREAD USED WITH
Air Regulator Gauges MODEL DESCRIPTION MATERIAL PSI (bar) NPT SERIES
Gauges
29850 Regulator Gauge Polycarbonate 0-160 (0-11) 1/8 Miniature
100067 Regulator Gauge Polycarbonate 0-160 (0-11) 1/4 Module-Air 2000 and
Heavy Duty
29850
USED WITH
Mounting Hardware MODEL DESCRIPTION SERIES
8338-1 Includes air shield tip that forms a protective 1/4 250 (17) 29 (2)
cone of air to contain chip deflection. Hand
lever actuation for optimum air flow control.
8440 Low-cost gun has(non-removable), relieving 1/4 180 (12.4) 29 (2) 8338-1
tip that prevents pressure build-up. Body
constructed of bright yellow polyester.
7444-K
AIR
INLET
MODEL DESCRIPTION NPT (F) Air Chuck
Air Chuck
635003 Single head inflator for passenger 1/4
car and truck tires.
635003
MAXIMUM
WORKING
HOSE LENGTH HOSE PRESSURE
MODEL FEET (M) THREAD SIZE (NPT) ID PSI (bar) Coiled Air Hose
Coiled Air Hose
628004-12 12 (3.9) 1/4 (M) x 1/4 (M) 1/4 200 (14)
628004-25 25 (8.2) 1/4 (M) x 1/4 (M) 1/4 200 (14)
628004-50 50 (16.4) 1/4 (M) x 1/4 (M) 1/4 200 (14)
628020-12 12 (3.9) 3/8 (M) x 3/8 (M) 3/8 200 (14)
628020-25 25 (8.2) 3/8 (M) x 3/8 (M) 3/8 200 (14) 628004-25
628020-50 50 (16.4) 3/8 (M) x 3/8 (M) 3/8 200 (14)
628023-12 12 (3.9) 1/2 (M) x 1/2 (M) 1/2 200 (14)
628023-25 25 (8.2) 1/2 (M) x 1/2 (M) 1/2 200 (14)
628023-50 50 (16.4) 1/2 (M) x 1/2 (M) 1/2 200 (14)
45
THREAD MATERIAL MAXIMUM
Fittings MODEL
SIZE
NPT
OF
CONSTRUCTION
PRESSURE
PSI (bar)
4280
Y43-44
Y43-214-N
77617 Y43-203-C
Y45-106-C
676
75364
46
MAXIMUM
THREAD MATERIAL WORKING
SIZE OF PRESSURE
MODEL NPT CONSTRUCTION PSI (bar) Fittings
Plain Tee (Female)
Y43-32-C 1/4 x 1/4 x 1/4 Iron 150 (10)
Accessories
Y43-233-C 3/8 x 3/8 x 3/8 Steel 3,000 (207)
Y43-233-C
Female Adapter
2074 1/8 (F) x 1/4 NPT(F) Steel 8,000 (552)
3249 1/8 (F) x 1/8 NPT(F) Steel 8,000 (552)
4280 3/8 (F) x 1/8 NPT(F) Steel 8,000 (552)
Y17-10
Adapter Unions
Y167-3 1/2 (F) x 3/8 NPT(M) Steel 6,000 (414)
Y167-4 3/4 (F) x 1/2 NPT(M) Steel 5,000 (345)
Y167-5 1/2 (F) x 1/4 NPT(M) Steel 6,000 (414)
4295 1/8 PTF SAE SHORT (F) Steel 8,000 (552)
x 7/16-27 (M)
4566 1/2 (F) x 3/4-16 (M) Steel 8,000 (552) 2074
4616 1/2 (F) x 1-3/8-18 (M) Steel 8,000 (552)
6847 3/8 (F) x .523-27 (M) Steel 8,000 (552)
71838 3/8 (F) x 1/4 NPT(M) Steel 8,000 (552)
47
MAXIMUM CYCLES CUBIC PACKINGS
GALLONS PER INCHES TYPE/MATERIAL FLUID AIR
(Liters) GALLON (Liters) FLUID OUTLET INLET
Specialty Pumps MODEL RATIO PER MINUTE (Liters) PER CYCLE UPPER LOWER INLET N.P.T. N.P.T.
Basic Pumps
High-Pressure
Stub 4-1/4” diameter air motor / 4” stroke
Wash & Tire-Fill 613100-1 10:1 3.9 (14.8) 21 (5.5) 11.0 (.18) Buna “N” Buna “N” Barbed 3/8 (F) 1/2 (F)
Pump Packages Stub 8” diameter air motor / 6” stroke
613112-K36-B 10:1 15.8 (59.8) 38(1) 59.8 (.98) GF Teflon GF Teflon 2 (M) 1-1/4 (F) 3/4(F)
w/Buna “N” w/Buna “N”
613201-2-C
48
Air Systems Components
Lubrication Equipment
Warranties
AIR SYSTEMS COMPONENTS WARRANTY
Ingersoll-Rand Fluid Products ("IRFP") warrants to the original use purchaser of the ARO® Air Systems Components
depicted in this catalog that IRFP will repair or replace, free of charges, including return shipping costs within the Continental
United States of America, any such product which under normal use and service proves defective in material or
workmanship, as determined by IRFP inspection, one year from date of purchase, provided the claimed defective product,
or part thereof, is promptly returned to the IRFP Service Repair Center or a factory-authorized service repair center, with
transportation charges prepaid.
If IRFP inspection discloses no defect in material or workmanship, repair or replacement and return will be made at
customary charges.
The foregoing warranty supersedes, voids and is in lieu of all or any other warranties, expressed or implied, and no warranty
of merchantability or fitness for particular purpose is intended or made. IRFP’s sole obligation and the original use
purchaser's sole remedy is as stated above and in no event shall IRFP be liable for any special, direct, indirect, incidental,
consequential or other damages or expenses of any nature including, without limitation, loss of profits or production time
incurred by the original use purchaser or any other party.
This warranty does not cover failure of parts or components due to normal wear or damage or wear which in the judgement
of ARO arises from misuse, abrasion, corrosion, negligence, accident, substitution of non-ARO parts, faulty installation or
tampering.
If IRFP inspection discloses no defect in material or workmanship, repair or replacement and return will be made at customary
charges.
Equipment not covered by IRFP warranty: accessories or components of equipment sold by IRFP that are not manufactured
by IRFP (such as switches, hoses, meters, etc.) are subject to the warranty, if any, of their manufacturer. IRFP will provide the
purchaser with reasonable assistance in making such claims.
The foregoing warranty supersedes, voids and is in lieu of all or any other warranties, expressed or implied, and no warranty
of merchantability or fitness for particular purpose is intended or made. IRFP's sole obligation and the original use purchaser's
sole remedy is as stated above and in no event shall IRFP be liable for any special, direct, indirect, incidental, consequential or
other damages or expenses of any nature including, without limitation, loss of profits or production time incurred by the
original use purchaser or any other party.
49
Noise Emission and
Pressure Warning
Pump Airborne Noise Emissions
Warning PUMP AIR
MOTOR OPERATING SOUND
SIZE PRESSURE CYCLES/ PRESSURE
(INCHES) MUFFLER (PSI) MIN dbA (LAeq)
Piston Pumps
2 NONE 60 40 76 (77.8)
2” Thunder NONE 100 N/A 80 (81.8)
3” Thunder NONE 100 N/A 85 (86.9)
3 NONE 60 40 82 (83.8)
4-1/4 91790 60 40 80 (81.8)
6 91790 60 40 83 (84.8)
PUMP AIR
PORT OPERATING SOUND
SIZE PRESSURE CYCLES/ PRESSURE
(INCHES) (PSI) MIN LAeq
Diaphragm Pumps
1/2 70 60 71.1
1 70 60 64.5
1-1/2 70 60 77.7
2 70 60 85.0
3 70 50 83.0
The pump sound pressure levels published above have been updated to an Equivalent Continuous Sound Level
(LAeq) to meet the intent of ANSI S1.13-1971. CAGI-PNEUROP S5.1 using four microphone locations.
Diaphragm pumps were tested with their standard muffler.
Never allow any part of the human body to come in front of or in direct contact with a material outlet.
Never point the nozzle of a dispensing valve at yourself or anyone else.
Most injections occur because of component rupture. Be certain that any and all system
components will withstand the pressures being developed. Never exceed the pressure rating of any
component in the system.
Weak, worn or damaged hoses are also a hazard. Before each use, check hoses for signs of wear,
leaks or loose fittings. Tighten all fluid connections regularly and replace weak or damaged hose. Your
personal safety and well being are at stake.
If accidental injection should occur, seek Immediate Emergency Medical Attention. DO NOT try to
treat the injury yourself. Be prepared to tell the doctor what fluid was accidentally injected.
50
Get Ready-It’s Gonna Reign!
SERIES PUMPS
• Advanced “Design-For-
Assembly” Technology
Significantly Enhances
User Value, Without
Performance Trade-Offs.