Académique Documents
Professionnel Documents
Culture Documents
GYPSE
ARCHITECTURAL BALUSTRADE
Architect: Lionel Dunet Photographer: X. Benony
GYPSE: a balustrading system
with countless opportunities
and minimalist lines
Joined posts
Spaced posts
Key features
and innovations
Glass infill beneath a round handrail Glass infill beneath a rectangular handrail
6
Cable and sheet metal infill with a Cable and glass metal infill with a
rectangular handrail round handrail
Cable and glass metal infill with an offset Running band aspect under the
rectangular handrail midrail with a St Andrew's cross
and round handrail
Joined posts
Simple and pure design.
2 half-height posts forming a
50 x 24 mm section.
Round or rectangular handrail.
Upside down V-shaped handrail bracket,
20 mm above the post.
Midrails and infills positioned
between posts.
Retainer flange for stainless steel cable
with a diameter of 4 mm.
Raked panels
Articulated and centred handrail bracket to be fixed
at an angle of 0° to 38°.
The midrails and stainless steel rod flanges and
cables can be fixed at a 0° to 38° angle.
The applications and models for the straight
railings also apply to the raked railings.
Architect: Castillon/ Fourreau Photographer: Patrick Loubet
10
Architect: A. Capelle. Photographer: G. Tordjeman
Handrails
Round handrail Ø 50 mm
On a slab
Slab
Rectangular handrail 27 x 65 mm
On a low wall
Rectangular handrail 35 x 65 mm
50 50
46
74
120
H=1024
H=1024
High of post=950
85 85
Spaced posts
65
High of post=950
H=1005.5
Min 450 MM
414
85 85
Applications
Examples of straight or
raked balustrading configurations - Installation on a slab or slab nose
Running band
Beneath aspect beneath
the handrail the midrail
Beneath
the midrail
Balustrade
beneath
the handrail
With embellishment
Balustrade uprights
Beneath
the handrail
Beneath
the midrail
Performance
Scope of use = maximum distance between posts
COMPLIANCE
1600 mm 930 mm
1600 mm 930 mm
1600 mm 930 mm
1600 mm 930 mm
Materials Finishes
and parts and colours
As with all Technal systems, only the best materials A wide range of finishes and colours is available
and components are used to minimise maintenance to meet individual project requirements,
and ensure long-term performance. enhancing existing buildings and offering
Aluminium profiles are extruded from architects and designers greater design freedom:
6060 T5 EN 12020, EN AW6060 and 6005A. Natural anodised in accordance with
Fittings are cast from Zamak 5 or AS13. EN 123731: 2001.
All gaskets are EPDM or TPE (Thermoplastic Polyester powder coating finishes in a
elastomer). wide range of colours in accordance with
Screws are made from stainless steel. “QUALICOAT”.
GYPSE is also available in lacquered finishes
with exclusive Technal colours for a stylish and
contemporary look.
Photographer: Patrick Loubet