Académique Documents
Professionnel Documents
Culture Documents
13
Appendix
Casing Data
Size Weight ID Drift Capacity
13-1
Completion Solutions
13-2
Completion Solutions | Appendix
13-3
Completion Solutions
13-4
Completion Solutions | Appendix
13-5
Completion Solutions
Joint OD Joint OD
Nom. OD
Wt/ft Wall ID Drift Joint ID Joint ID
in. in. Reg. Spec. Reg. Spec.
1.8 0.133 1.049 0.955 1.552 1.525 0.970
1 1.315
2.25 0.179 0.957 0.848 1.600 .864
2.4 0.140 1.380 1.266 1.833 1.858 1.300
1 1/4 1.660 3.02 0.191 1.278 1.184 1.927 1.218
3.24 0.198 1.264 1.170 1.927 1.200
2.9 0.145 1.610 1.516 2.113 2.094 1.530
1 1/2 1.900 3.64 0.200 1.500 1.406 2.162 1.440
4.19 0.219 1.462 1.368 2.179 1.390
3.25 0.156 1.751 1.657 2.330 2.295 1.700
2 1/16 2.063
4.5 0.225 1.163 1.519 2.460 2.407 1.550
4.7 0.190 1.995 1.901 2.700 2.655 1.945
5.3 0.218 1.939 1.845 2.750 2.700 1.890
2 3/8 2.375 5.95 0.254 1.867 1.773 2.906 2.782 1.805
6.2 0.261 1.853 1.759 2.938 2.794 1.795
7.7 0.336 1.703 1.609 3.125 3.002 1.645
6.5 0.217 2.441 2.347 3.210 3.166 2.371
7.9 0.276 2.323 2.229 3.438 3.312 2.265
8.7 0.308 2.259 2.165 3.500 3.365 2.200
2 7/8 2.875
9.5 0.340 2.195 2.101 3.625 3.419 2.130
10.7 0.392 2.091 1.997 3.723 3.595 2.035
11.0 0.405 2.065 1.971 3.740 1.994
9.3 0.254 2.992 2.867 3.915 3.859 2.920
10.3 0.289 2.992 2.797 3.980 3.914 2.870
3 1/2 3.500 12.8 0.368 2.764 2.639 4.313 2.700
12.95 0.375 2.750 2.625 4.313 4.189 2.687
15.8 0.476 2.548 2.423 4.644 4.474 2.490
4 4.000 13.4 0.330 3.340 3.215 4.625 4.514 3.275
12.75 0.271 3.958 3.833 4.920 4.861 3.865
4 1/2 4.500
13.5 0.290 3.920 3.795 4.955 4.890 3.840
All tubing and joint dimensions in inches.
13-6
Completion Solutions | Appendix
Conversion Factors
Acre = 43,560 square feet Foot per second = 0.68182 mile per hour Part per million = 0.05835 grain per gallon
Acre = 4.047 square meters Foot pound = 0.001286 British Thermal Unit Part per million = 8.345 pounds per million gal
Foot pound per
Acre foot = 7,758 barrels = 0.001818 horsepower Pascal (Pa) = 0.00015 pound per square inch
second
Atmosphere = 33.94 feet of water Gallon (US) = 0.02381 barrel Pound = 7000 grains
Atmosphere = 29.92 inches of mercury Gallon (US) = 0.1337 cubic feet Pound = 0.4536 kilogram
Atmosphere = 760 millimeters of mercury Gallon (US) = 231.000 cubic inches Pound = 0.4448 Decanewton (daN)
pounds per square
Atmosphere = 14.70
inch
Gallon (US) = 3.785 liters Pound per square inch = 2.309 feet of water @ 60°F
13-7
Completion Solutions
13-8
Completion Solutions | Appendix
Inches Setting Stroke on Tubing for Desired Tubing Weight or Tension on Packer
Packer Depth, ft
Packer Depth, ft
Note: Figures in gray boxes represent tension only. All other figures
represent tension or compression.
1.900-in. OD - 2.90 lb/ft Tubing
5,000 10,000 15,000 20,000 25,000 30,000
1,000 3 6 9 12 15 18
2,000 6 13 19 26 32 39
3,000 10 20 30 40 50 60
4,000 13 26 39 52 65 78
5,000 16 33 49 66 82 99
6,000 20 40 60 80 100 120
7,000 23 46 69 92 115 138
Packer Depth, ft
13-9
Completion Solutions
Inches Setting Stroke on Tubing for Desired Tubing Weight or Tension on Packer
2 3/8-in. OD - 4.7 lb/ft Tubing
5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000 45,000 50,000
1,000 2 4 6 8 10 12 14 16 18 20
2,000 4 8 12 16 20 24 28 32 36 40
3,000 6 12 18 24 30 36 42 48 54 60
4,000 9 16 24 32 40 48 56 64 72 80
5,000 10 20 30 40 50 60 70 80 90 100
6,000 12 23 35 46 57 69 81 92 104 115
7,000 14 27 40 54 67 81 94 108 121 135
8,000 15 31 46 63 77 93 108 124 139 155
Packer Depth, ft
13-10
Completion Solutions | Appendix
Inches Setting Stroke on Tubing for Desired Tubing Weight or Tension on Packer
9,000 9 17 26 34 43 51 60 68 77 85
10,000 10 19 29 38 48 57 67 76 86 95
11,000 11 21 32 42 52 63 74 84 95 105
12,000 12 23 35 46 56 69 81 92 104 115
13,000 13 25 38 50 62 75 88 100 113 125
14,000 14 27 41 54 67 81 95 108 122 135
15,000 14 28 43 57 71 85 99 114 128 142
16,000 15 30 45 60 75 90 105 120 135 150
17,000 16 32 48 64 80 96 112 128 144 160
18,000 17 34 51 68 85 102 119 136 153 170
19,000 18 36 54 72 90 108 126 144 162 180
20,000 19 38 57 76 95 114 133 152 171 190
Note: Figures in gray boxes represent tension only. All other figures
represent tension or compression.
13-11
Completion Solutions
Inches Setting Stroke on Tubing for Desired Tubing Weight or Tension on Packer
The following equation may be used for calculating inches of setting stroke for tubing
or desired weight or tension on packer.
DesiredWeight PackerDepth
Inches = ---------------------------------------- ----------------------------------- Factor
1000 1000
13-12
Completion Solutions | Appendix
13-13
Completion Solutions
Gas Table
To find the bottomhole pressure, multiply the surface pressure by the
factor corresponding to the well depth and gravity of the gas.
13-14
Completion Solutions | Appendix
Well Conditions
*Maximum Bottomhole Pressure: ___________________ *Maximum Bottomhole Temperature: ___________________
Maximum Wellhead Pressure:_______________________
Wellhead Temperatures: Maximum: _________________ Minimum: ____________________________________________
Production Rates: Oil: ___________________________________ Gas:_____________________________________________
Gas Condensate: ________________________________ Water: _________________________________________
Additional Information
Will Halliburton equipment be contacted by corrosion inhibitors? yes no
Will Halliburton equipment be contacted by acidizing fluids? If yes, list acid type and concentration: ________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
Corrosion history of this or similar wells: ____________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
Other pertinent information that may impact materials selection: ______________________________________________
_______________________________________________________________________________________________________
*Minimum information required for material recommendation
13-15
Completion Solutions
Well Information*
Initial Completion
Tubing Casing
Location
Surface 0 0
Packer
Injection
Tubing Casing
Location
Surface
Equivalent
P T Density P Density P Density P
Density
Location
Surface
Packer
Tubing Casing
Initial
MD TVD OD ID WT Yield Slackoff OD ID WT
**If applicable
Packer Information
Stinger/Seal OD
in.
Yes/No
Tubing Connected to Packer (i.e. threaded or latched)
Tubing Free to Move (i.e. sealbore or travel joint)
*If units other than those listed are used, advise units of data supplied. MD=Measured Depth, TVD=True Vertical Depth P=Pressure, T=Temperature,
OD=Outside Diameter, ID=Inside Diameter
13-16