Académique Documents
Professionnel Documents
Culture Documents
3d embroidery crafts
broderie 3d
crochet x loisirs créatifs
colour / couleurs
code nº colour nº skeins* code nº colour nº skeins* code nº colour nº skeins*
code nº couleur no d’échevettes* code nº couleur no d’échevettes* code nº couleur no d’échevettes*
2 162 x1 4 310
stitches / points
B A
C
F E D
Backstitch / Point arrière Running stitch / Point d’avant Star Stitch / Point Étoile
code letter
lettre D
use 6 strands
utiliser 6 brins
1. Cut out the whole Snowman template and pin onto the white felt on 1. Découpez tout le gabarit du bonhomme de neige en entier et épinglez-le
the reverse side, draw around the template with a pen and cut out. This au dos de la feutrine blanche. Détourez le gabarit avec un stylo et découpez.
will be the base. Ce sera la base.
2. Cut the template again until all the pieces are separate. 2. Coupez à nouveau le gabarit jusqu’à ce que tous les morceaux soient
séparés.
3. Pin the body template pieces onto the white felt on the reverse side,
draw around the templates with a pen and cut out. 3. Épinglez les morceaux du corps au dos de la feutrine blanche. Détourez les
morceaux avec un stylo et découpez.
4. Pin the nose template piece onto the orange felt on the reverse side,
draw around the template with a pen and cut out. 4. Épinglez le nez au dos de la feutrine orange. Détourez-le avec un stylo et
découpez.
5. Pin the hat template pieces onto the green felt on the reverse side,
draw around the template with a pen and cut out 5. Épinglez les morceaux du chapeau au dos de la feutrine verte. Détourez-le
avec un stylo et découpez.
6. Pin all your felt pieces on to the front side of the white base.
6. Épinglez tous vos morceaux de feutrine sur le devant de la base blanche.
7. Using all six strands of the mouline, back stitch around the edges of
www.dmc.com © 2019 / all rights reserved worldwide
each separate piece in the corresponding Mouliné colour to secure 7. À l’aide des six brins de mouliné de la couleur correspondant aux différents
them to their base. morceaux, cousez au point arrière autour des bords de chacun des morceaux
pour les fixer sur leur base.
8. Take the pipe cleaner and cut it in half, bend and twist each half in to
Ouvrez votre pack, vous y trouverez Posez votre tissu de base sur une surface
la feuille de papier magique avec les plane et placez votre motif dans la
dessins préimprimés dessus. Découpez le position désirée. N’ayez pas peur de
motif que vous souhaitez broder. jouer avec le positionnement,
soyez créatif !
www.dmc.com © 2017 / all rights reserved worldwide
step step
étape 3 étape 4
step step
étape 5 étape 6
Once you have finished stitching your Enjoy your custom embroidered
design, rinse your base fabric in cold creation.
water to dissolve the magic paper
template and let it dry. Profitez de votre création!
step step
étape 3 étape 4
Decide where you want your embroidery Place your base fabric against an
and place your base fabric on top of your available light source i.e a window,
www.dmc.com © 2017 / all rights reserved worldwide
design sheet and secure it using pins or lightbox or computer screen and trace
masking tape. the design onto your base fabric using a
water soluble embroidery transfer pen.
Choisissez le tissu sur lequel vous
souhaitez broder votre motif et place-le Placez votre tissu contre une source
step step
étape 5 étape 6
Once you have traced the design, Hoop fabric and start stitching out your
remove the pinned design from the back design following the stitch instruction
of your fabric. illustrations. It’s super easy,
just follow the lines.
Une fois votre motif transféré sur le
tissu, enlevez le motif épinglé à l’arrière Commencez à broder votre conception
du tissu. en suivant les lignes du motif que vous
venez de tracer.
step step
étape 7 étape 8
Once you have finished stitching your Enjoy your custom embroidered
design, rinse your base fabric in cold creation.
water to remove transfer pen ink.
Profitez de votre création !
Quand vous avez fini de broder votre
motif, rincez le tissu à l’eau froide pour
dissoudre l’encre du stylo de transfert.