Académique Documents
Professionnel Documents
Culture Documents
ORDERING INFORMATION
DS2Y-S
Operating function
Nil: Single side stable
Nominal coil voltage
DC 1.5, 3, 5, 6, 9, 12, 24, 48 V
Polarity
Nil: Standard polarity
Note: UL/CSA approved type is standard.
Reverse polarity types (with the suffix-R) are to be discontinued.
TYPES
Single side stable type
Contact arrangement Nominal coil voltage
Part No.
1.5V DC DS2Y-S-DC1.5V
3V DC DS2Y-S-DC3V
5V DC DS2Y-S-DC5V
6V DC DS2Y-S-DC6V
2 Form C
9V DC DS2Y-S-DC9V
12V DC DS2Y-S-DC12V
24V DC DS2Y-S-DC24V
48V DC DS2Y-S-DC48V
Standard packing: Tube: 50 pcs.; Case: 500 pcs.
ds_61005_en_ds2y: 230712J 1
DS2Y Products marked are discontinued as of August 31, 2012
RATING
1. Coil data
Single side stable type
Nominal operating
Nominal coil Pick-up voltage Drop-out voltage Coil resistance Nominal operating Max. applied voltage
current
voltage (at 20C 68F) (at 20C 68F) [10%] (at 20C 68F) power (at 50C 122F)
[10%] (at 20C 68F)
1.5V DC 132.7mA 11.3
3V DC 66.7mA 45
5V DC 40mA 125
6V DC 70%V or less of 10%V or more of 33.3mA 180 200mW 200%V of
nominal voltage nominal voltage
9V DC 22.2mA 405 nominal voltage
(Initial) (Initial)
12V DC 16.7mA 720
24V DC 8.3mA 2,880
48V DC 6.3mA 7,680 300mW
2. Specifications
Characteristics Item Specifications
Arrangement 2 Form C
Contact Initial contact resistance, max. Max. 50 m (By voltage drop 6 V DC 1A)
Contact material Ag+Au clad
Max. switching power 60 W, 62.5 VA (resistive load)
Max. switching voltage 220 V DC, 250 V AC
Max. switching current 2A
Rating
Max. carrying current 3A
Minimum operating power Approx. 98 mW (147 mW: 48 V)
Nominal operating power Approx. 200 mW (300 mW: 48 V)
Min. 100M (at 500V DC)
Insulation resistance (Initial)
Measurement at same location as “Initial breakdown voltage” section.
Between open contacts 750 Vrms for 1min. (Detection current: 10mA.)
Breakdown voltage
Between contact sets 1,000 Vrms for 1min. (Detection current: 10mA.)
(Initial)
Between contact and coil 1,000 Vrms for 1min. (Detection current: 10mA.)
Electrical FCC surge breakdown voltage between contacts
characteristics 1,500 V
and coil
Temperature rise (at 20C 68F) Max. 65C with nominal coil voltage across coil and at nominal switching capacity
Approx. 4 ms [approx. 3 ms]
Operate time [Set time] (at 20C 68F)
(Nominal coil voltage applied to the coil, excluding contact bounce time.)
Approx. 3 ms [approx. 3 ms]
Release time [Reset time] (at 20C 68F)
(Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode)
Functional Min. 490 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10s.)
Shock resistance
Mechanical Destructive Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
characteristics Functional 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.)
Vibration resistance
Destructive 10 to 55 Hz at double amplitude of 5 mm
Mechanical Min. 108
Expected life
Electrical 5105 (1 A 30 V DC), 105 (2 A 30 V DC)
Ambient temperature: –40C to +70C –40F to +158F
Conditions for operation, transport and storage*
Conditions Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Max. operating speed (at rated load) 60 cpm
Unit weight Approx. 4g .14oz
* Refer to “6. Usage, Storage and Transport Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.
2 ds_61005_en_ds2y: 230712J
Products marked are discontinued as of August 31, 2012 DS2Y
REFERENCE DATA
1. Maximum switching capacity 2. Coil temperature rise (Single side stable) 3. Operate/release time for single side stable
Tested sample: DS2Y-S-DC12V, 5 pcs. (Without diode)
Measured portion: Inside the coil Tested sample: DS2Y-S-DC12V, 10 pcs.
Ambient temperature: 21C to 25C 70F to 77F Ambient temperature: 20C 68F
1,000 V Operate time
5 Release time
3A
Temperature rise, ∞C
30 4
2A
Time, ms
100 V
Contact voltage
3
0A Mean value
Mean value
2
10 V
20
1
10 mA
100 110 0 80 100 120
10 μA 100 mA 1A Coil applied voltage, %V
Switching current Coil applied voltage, %V
Pick-up/Drop-out voltage, V
8 8
ON ON
6 6
OFF OFF
OFF OFF
4 4
Drop-out voltage ON ON Drop-out voltage ON ON
2 2
0 0
5 10 15 5 10 15
.197 .394 .591 .197 .394 .591
Inter-relay distance, mm inch Inter-relay distance, mm inch
DIMENSIONS (mm inch) Download CAD Data from our Web site.
CAD Data
CAD Data External dimensions PC board pattern (Copper-side view) Schematic (Bottom view)
(Deenergized position)
20 9.9 8-0.9 dia.
.787 .390 8-.035 dia.
9 11 13 16
2.54 N.O. N.C. COM –
.100
2.54
9.3 .100
.366 0.6
.024
7.62
3.4 .300
0.6 .134
2.0 .024 N.O. N.C. COM +
.078 0.3 8 6 4 1
5.6 .012
0.6 .220
.024 matching 16 pin IC socket Direction indication*
5.08 5.08 7.62 7.62
*A polarity bar shows the relay direction.
.200 .200 .300 .300
Tolerance: 0.1 .004
General tolerance: 0.3 .012
ds_61005_en_ds2y: 230712J 3