Académique Documents
Professionnel Documents
Culture Documents
FHS-240R110/FHS-240W110
Description Application
Les avertisseurs combinés sonore/visuel de la série L’avertisseur sonore/visuel de la série 200 s’installe
200 de Mircom rencontrent les normes exigées pour dans les lieux ou un signal visuel est requis. Tel
la signalisation par ULC S526 pour les personnes que les écoles, maisions, appartements, édifice à
malentendantes. bureaux, restaurants, hôtels.
MEA
approved
APPROVED
NUMÉRO DE CATALOGUE
NE PAS UTILISER POUR L’INSTALLATION.
5260
Mircom se réserve le droit de modifier à tout moment et sans préavis les prix, les couleurs, les matériaux, les composants, l’équipement, les caractéristiques et les modèles ainsi que de cesser la fabrication de certains modèles.
Selectable Candela Output Horn Selectable Sound Output
Temporal - Non-Temporal
Electro Mech - 3000 Hz
High - Low
Tamper Proof
Light Output Distribution/Horizontal and Vertical Dispersion
UL Required Minimum Light Output (cd)
Wall Mount Horizontal Wall Mount Vertical
Degrees @ 75 cd @ 110 cd @ 75 cd @110 cd
0 75.00 110.00 75.00 110.00
45
5 ~ 25 67.50 99.00 67.50 99.00
30 56.25 82.50 67.50 99.00 90
40 56.25 82.50 34.50 50.60
45 56.25 82.50 34.50 50.60
50 41.25 60.50 20.25 29.70
Compound 45
55 33.75 49.50 16.50 24.20 90
60 30.00 44.00 13.50 19.80
65 26.25 38.50 12.00 17.60 0
70 26.25 38.50 11.25 16.50
75 22.50 33.00 9.75 14.30 Compound 45
90
80 22.50 33.00 9.00 13.20
85 ~ 90 18.75 27.50 9.00 13.20
Compoud 45 18.00 26.40
+
I
R
E
H+H + + R
E
+ _
+ _
F
I
R F.A.C.P. F.A.C.P.
F.A.C.P. E To Next Device or Strobe Signal Horn Signal
SDM-240 F
To Next Device or
I
Strobe Signal End-Of Line-Resistor Circuit Circuit R
Circuit _ IN OUT End-Of Line-Resistor
_ Strobe Horn _ + +
_ H+H +
_
+
_ E
+ _ _ +
+ +
+ _
Warning:
Strobes must be used only on circuits with continuously operating voltage, DO NOT use strobe on coded or interrupted circuits in which
the applied voltage is interrupted ON and OFF as the strobe may fail to flash.
The strobe applied voltage must be within its rated input voltage range.
Fuse ratings on signalling circuits must handle peak currents from all devices connected to those circuits.
CAT. 5260
NE PAS UTILISER POUR L’INSTALLATION. page 2 of 4
Klaxon/stroboscope
PC3 PC2 Tone PC1 P P P Courant (mA) Puissance (dbA @ DC)
Pattern Volume C C C DC FWR
3 2 1 16V 24V 33V 16V 24V 33V 16V 24V 33V
Electro High 1 1 1 160 125 115 212 159 145 85 87 88
Mechanical Low 1 1 0 148 112 102 199 144 120 75 78 81
Non-temp
High 1 0 1 160 125 115 212 159 145 85 88 88
3000 Hz
@ Low 1 0 0 146 112 102 199 144 120 75 78 81
75cd Electro High 0 1 1 160 125 115 212 159 145 81 83 84
Mechanical Low 0 1 0 148 112 102 199 144 120 71 75 77
Temporal
High 0 0 1 160 125 115 212 159 145 80 83 84
3000 Hz
Low 0 0 0 148 112 102 199 144 120 71 75 77
Electro High 1 1 1 212 157 141 277 205 173 85 87 88
Mechanical Low 1 1 0 200 144 128 264 190 148 75 78 81
Non-temp
High 1 0 1 212 157 141 277 205 173 85 88 88
3000 Hz
@ Low 1 0 0 200 144 128 264 190 148 75 78 81
110cd Electro High 0 1 1 212 157 141 277 205 173 81 83 84
Mechanical Low 0 1 0 200 144 128 264 190 148 71 75 77
Temporal
High 0 0 1 212 157 141 277 205 173 80 83 84
3000 Hz
Low 0 0 0 200 144 126 264 190 148 71 75 77
Electro High 1 1 1 27 35 52 36 45 64 85 87 88
Mechanical Low 1 1 0 15 22 39 23 30 39 75 78 81
Non-temp
High 1 0 1 27 35 52 36 45 64 85 88 88
3000 Hz
Low 1 0 0 15 22 39 23 30 39 75 78 81
Klaxon
Electro High 0 1 1 27 35 52 36 45 64 81 83 84
Mechanical Low 0 1 0 15 22 39 23 30 39 71 75 77
Temporal
High 0 0 1 27 35 52 36 45 64 80 83 84
3000 Hz
Low 0 0 0 15 22 39 23 30 39 71 75 77
Dimensions
5(127) 2 1/4(56.9) 3 3/8(85.7)
Dimensions in inches 1 13/16(46)
3 9/32(83.5)
3 3/8(85.7)
3 9/32(83.5)
5(127)
Mounting Options
Strobe with Universal mounting Strobe with Universal mounting Strobe with Universal mounting Strobe with Universal mounting
plate and single gang box. plate and 4” square back box. plate and double gang box. plate and BBW-240 weather proof
back box.
CAT. 5260
NE PAS UTILISER POUR L’INSTALLATION. page 3 of 4
SDM-240 Sync Module Dimensions
Electrical Backbox
Dimensions in inches
* The total current draw from all devices connected to the SDM-240
should not exceed 3.0A.
**The SDM-240 should only be connected to circuits that provide
continuously applied voltage.
4.33
(110)
(85.7)
3.374
Ordering Information
Model Description
FHS-240W110 Series 200 Select-A-Horn/Strobe Combination, White, 75 or 110 Strobe Candela
FHS-240R Series 200 Select-A-Horn/Strobe Combination, Red, 75 or 110 Strobe Candela
SDM-240 Series 200 Select-A-Horn/Strobe Sync. Module
BBW-240 Weather Proof Backbox for Series 200 Horn/Strobes
SBB-WG Surface backbox, White
SBB-RG Surface backbox, Red
Canada États-Unis
25 Interchange Way 60 Industrial Parkway
Vaughan, Ontario L4K 5W3 Cheektowaga, New York 14227
Téléphone : (905) 660-4655 Sans frais : (888) 660-4655
Télécopieur : (905) 660-4113 Télécopieur : (888) 660-4113