Académique Documents
Professionnel Documents
Culture Documents
Immobilizer bypass
Hand-Brake Status
Foot-Brake Status
Parking Lights
Trunk Status
Door Status
Tachometer
Disarm
Unlock
VEHICLE YEARS
Lock
Arm
VEHICULES ANNÉES
MITSUBISHI
Outlander Push-to-start (AT) 2014-2019 • • • • • • • • • • • •
FIRMWARE VERSION To add the firmware version and the options, use the
VERSION LOGICIELLE FLASH LINK UPDATER or FLASH LINK MOBILE tool,
86.[05]
sold separately.
Pour ajouter la version logicielle et les options,
BMW/Mercedes/ utilisez l’outil FLASH LINK UPDATER
MINIMUM
Mini/Mitsubishi ou FLASH LINK MOBILE, vendu séparément.
3X
REMOTE STARTER DIAGNOSTICS
DIAGNOSTIQUE DU DÉMARREUR À DISTANCE
START MODULE RED LED | DEL ROUGE DU MODULE
x2 flash : Brake ON Frein Activé
x3 flash : No tach Pas de Tach
All doors must be closed. Press the OEM remote’s Lock button 3x to The vehicle will START. x4 flash : Ignition Clé de contact
Toutes les portes doivent
remote-start (or remote-stop) the vehicle. before start détectée avant
être fermées
Appuyez sur le bouton Verrouillage 3X de la Le véhicule DÉMARRE. démarrage
télécommande d'origine pour démarrer à distance (ou x5 flash : Hood Open Capot Ouvert
arrêter à distance) le véhicule.
WARNING | ATTENTION
REMOTE STARTER
DÉMARREUR À DISTANCE
CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE:
or use the package RSPB, Sold separately. THE VEHICLE CAN BE STARTED BY LE VÉHICULE PEUT DÉMARRER SOIT: EN
EITHER: PRESSING THE LOCK BUTTON APPUYANT 3 FOIS CONSÉCUTIVEMENT SUR
COUPEZ CETTE CARTE D'AVERTISSEMENT ET COLLEZ-LA À UN ENDROIT VISIBLE: ON THE OEM REMOTE 3 TIMES LE BOUTON VERROUILLAGE DE LA
ou utilisez la trousse RSPB, vendue séparément. CONSECUTIVELY OR BY A TÉLÉCOMMANDE DU VÉHICULE OU PAR UN
SMARTPHONE. TURN ON THE SAFETY TÉLÉPHONE INTELLIGENT. ACTIONNEZ EN
SWITCH LOCATED UNDER THE POSITION ‘ON’ LE COMMUTATEUR DE
DASHBOARD BEFORE WORKING ON SÉCURITÉ SITUÉ SOUS LE TABLEAU DE BORD
THE VEHICLE. AVANT LES TRAVAUX D'ENTRETIEN.
This guide may change without notice. See www.fortin.ca for latest version.
Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. Page 3 / 8
DESCRIPTION | DESCRIPTION
Fuse box
Boîte à fusibles
(+) IGNITION F
1 E 1 (+) 12V
B
1
F
1
D
1
C
1 D 1 1 A (+)TURN
A SIGNAL LEFT
1
E
1
(+)START (+)TURN
SIGNAL RIGHT
(~) CAN2
HIGH (~) CAN1
HIGH
2 3
(~) CAN2
LOW (~) CAN1
LOW
This guide may change without notice. See www.fortin.ca for latest version.
Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. Page 4 / 8
Hood pin only required on vehicles not OPTIONAL RF-KIT RF-KIT REMOTE
equipped with a factory hood pin.
Commutateur de capot requis seulement KIT RF OPTIONNEL STARTER
si le véhicule n'est pas équipé de cette KIT-RF DÉMARREUR RS2 IN (+)12V Battery
composante.
WITH RF-KIT À DISTANCE RS1 Ground | Masse
SAFETY OVERRIDE SWITCH AVEC KIT RF
COMMUTATEUR DE SÉCURITÉ WITH | AVEC DATA-LINK: Ground
Direct connection Masse
Branchement directe
Hood pin
Orange/Black
Dk.Blue
In
In
A7
A7
A8
A C C2
C2 Orange/Brown
A8 C1
C1 Orange/Green
Red/Blue In A9
A9
Lt.Blue/Black A10
A10 D6 White/Red (+)12V D6
Black
Pink
Out A11
A11 D D4
D5 White/Blue (+)Igni�on
Out A12
A12 White/Green
Start/Stop external Yellow/Black In A13
A13 D3 Yellow/Red (+)12V D3
(-) Parking Lights OUT Brown/White Out A14
A14 D2 Yellow/Blue (+)Start
Pink/Black Out A15
A15 D1 Yellow/Green
Purple/Yellow A16
A16
Green/White A17
A17
Green/Red A18
A18
White/Black A19
A19
Lt.Blue A20
A20
30
A14
86
87a
85 87 10 Amp
Fuse
6A Diode
6A Diode
3 Amp
Fuse
A1/D5 B4/D3/D6 D2 C1 C2 C3 C4
(+)TURN (+)TURN (~) CAN2 (~) CAN2 (~) CAN1 (~) CAN1
OUTLANDER
1 2 3 4 5 1 2 3 1 2 3 4 5
1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11
6 7 8 9 10 11 12 13 1 2 6 7 8 9 10 11 12 13
4 5 6 7 8 12 13 14 15 16 17 18 19 20 21 22 12 13 14 15 16 17 18 19 20 21 22
A B F D
1 1 1 1 2 3
Back view White 13-pin connector Back view connector Back view Black Back view White 13-pin Harness in Driver kick Harness in Driver kick
connector White 8-pin connector 2-pin connector connector panel, close to fire panel, close to fire
Connecteur Blanc Connecteur Blanc Connecteur Noir -pins Connecteur Blanc wall, 22-pin connector, wall, 22-pin connector,
13-pins Vue de dos 8-pins Vue de dos Vue de dos 13-pins Vue de dos covered with black cover with black electric
electric tape - Back view tape - Back view
B
Harnais dans le Harnais dans le
panneau latéral côté panneau latéral côté
D conducteur, prêt du conducteur, prêt du
F pare-feu, connecteur pare-feu, connecteur
de 22 pins, recouvert de de 22 pins, recouvert de
Fuse box ruban electrique noir - ruban electrique noir -
Boîte à fusibles Vue de dos Vue de dos
A
23
This guide may change without notice. See www.fortin.ca for latest version.
Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. Page 5 / 8
1
Press and hold the Appuyez et maintenir le bouton
x1
programming button: de programmation enfoncé:
Connect the 4-PIN Data-link Branchez le harnais Data-Link à
HOLD harness (Black connector). 4-Broches (connecteur Noir)
2
Release the programming Relâchez le bouton de program-
button when the Blue LED mation quand la DEL Bleue est
RELEASE is ON. allumée.
BLUE
ON Si la DEL Bleue n’est pas allumée,
BLEU If the LED are not solid BLUE
disconnect the 4-PIN Data-link débranchez le harnais Data-Link à
harness (Black connector) and go 4-Broches (connecteur Noir) et
back to step1. retournez au début de l'étape 1.
ALTERNATE
KEY BYPASS PROGRAMMING PROCEDURE 2/2 | PROCÉDURE DE PROGRAMMATION CONTOURNEMENT DE CLÉ 2/2
7
Microsoft Windows
Computer with
Internet connection*
Ordinateur Microsoft
Windows avec
connection Internet*
Use the tool: Utilisez l'outil:
FLASH LINK UPDATER* FLASH LINK MANAGER* FLASH LINK UPDATER or FLASH LINK UPDATER ou
OR SOFTWARE | PROGRAMME
FLASH LINK MOBILE FLASH LINK MOBILE
OU to visit the DCryptor menu. pour visiter le menu DCryptor.
Smartphone*
(Internet provider
charges *Parts required (not included) *Pièces requises (non incluses)
may apply)
Téléphone
Intelligent*
VEHICLE'S OBDII
CONNECTOR
(des frais du
fournisseur
CONNECTEUR OBDII
DU VÉHICULE FLASH LINK MOBILE* Internet peuvent
s’appliquer)
8
AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 4-Pin (Data-Link)
EVO-ALL
connector and after, all the remaining connector.
APRÈS LA PROCÉDURE DE PROGRAMMATION
DCRYPTOR COMPLETÉE : retournez au véhicule et
rebranchez le connecteur 4-pins (Data-Link)
et après, tous les connecteurs du EVO-ALL.
REMOTE
REMOTE STARTER
STARTER FUNCTIONALITY
FUNCTIONNALITY| FONCTIONNALITÉS DU
| FONCTIONNALITÉS DÉMARREUR
DU ÀÀ
DÉMARREUR DISTANCE
DISTANCE
START
ON x2
Remote start the Enter the vehicle Press the Push-to- The vehicle can now
vehicle. with the Smart-Key. Start button twice to be put in to gear
turn ON the ignition. and driven.
ALL
HARDWARE VERSION
Notice: Updated Firmware and Installation Guides
FIRMWARE VERSION
Date: xx-xx Updated firmware and installation guides are posted on our web site on a regular
EVO-ALL basis. We recommend that you update this module to the latest firmware and
INTERFACE MODULE
PATENTS PENDING US: 2007-228827-A1
download the latest installation guide(s) prior to the installation of this product.
Made in Canada www.fortinbypass.com
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe
logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case
is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability
or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other
way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly
caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be
installed by qualified technician. The information supplied is a guide only. This instruction guide may change without
notice. Visit www.fortinbypass.com to get the latest version.
MISE EN GARDE
L’information de ce guide est fournie sur la base de représentation (telle quelle) sans aucune garantie de précision et
d’exactitude. Il est de la seule responsabilité de l’installateur de vérifier tous les fils et circuits avant d’effectuer les connexions.
Seuls une sonde logique ou un multimètre digital doivent être utilisés. FORTIN SYSTÈMES ÉLECTRONIQUES n’assume
aucune responsabilité de l’exactitude de l’information fournie. L’installation (dans chaque cas) est la responsabilité de
l’installateur effectuant le travail. FORTIN SYSTÈMES ÉLECTRONIQUES n’assume aucune responsabilité suite à
l’installation, que celle-ci soit bonne, mauvaise ou de n’importe autre type. Ni le manufacturier, ni le distributeur ne se
considèrent responsables des dommages causés ou ayant pu être causés, indirectement ou directement, par ce module,
excepté le remplacement de ce module en cas de défectuosité de fabrication. Ce module doit être installé par un technicien
qualifié. L’information fournie dans ce guide est une suggestion. Ce guide d’instruction peut faire l’objet de changement
sans préavis. Consultez le www.fortinbypass.com pour voir la plus récente version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
www.fortinbypass.com
ADDENDUM GUIDE
WEB UPDATE | MISE À JOUR INTERNET