Académique Documents
Professionnel Documents
Culture Documents
Subject to modification in the interest of progress. Illustrations and technical details could include options and not binding for actual construc-
3 All controls easily accessible
code indication Width over fork carriage: 520mm, 540mm, 560mm & 680mm
Power assisted steering Fork carriage length: 1000mm, 1150mm, 1600mm, 2400mm
Automatic speed reduction when cornering (overhang 188mm) and 2400mm (overhang 563mm)
ECO-Mode with up to 12% energy savings Standard Fabric Seat
Drive wheel position mentioned in display Protection -10°C
CAN bus technology
Drive wheels: cushion rubber, synthetic cushion rubber non Mounting pole on left side for optional auxiliary items Safety
marking, wet grip Mounting pole on right side for flashing beacon The Linde Seated rider pallet truck is a multi-purpose truck
Load wheels: greasable, tandem polyurethane or single polyu- Support Clipboard DIN A4 & panoramic mirror designed for rapid load transfers & lorry loading /unloading.
rethane configuration Support data terminal incl. power supply cable 24V It is equipped with three independent braking systems; and
Lateral battery change 4PzS available with ergonomic battery Mobile or Fixed battery stand a four point configuration ensures inherent stability. The
un/locking with lever & rollers (l2=920mm) Automatic battery watering system operator is always safely within the chassis perimeter’s and Workstation Comprehensive energy solutions AC drive motor
Leather seat & seat heating Cold store protection -35°C the smooth chassis contours eliminate sharp edges. All the 3 Multifunctional instrument display with 3 24V batteries: capacities from 345 Ah 3 Powerful, 3 kW maintenance-free AC
easy ergonomic menu. Truck access (3PzS) to 500 Ah (4PzS) drive motor
Load backrests with h=1115mm and h=1875mm wheels pivot safely within the chassis frame. control by PIN code or ignition key 3 Standard Lateral change including rol- 3 Moisture and dust proof
Floor stability compensator Other options available on request 3 Storage compartment for work gloves, lers inside the battery compartment to 3 Maximum 15% gradient performance
Speed reduction if forks lowered Performance Reliability writing utensils etc. aid battery change (laden)
3 Options: Support clipboard DIN A4, 3 Lever initiates battery change pre- 3 No roll back on gradient starts
The powerful high torque, 3 kW AC drive motor, offers Rugged construction and the use of tried and tested compo-
Flashing beacon. Panoramic mirror venting direct contact 3 High torque motor negotiates loading
speeds up to 12 km/h and capacities of 2,0t & 2,5t to fulfill nents ensure this a truck that can be relied on. Motor, sub- 3 Preparation for data terminal 3 Li-ION batteries with 4,5KWh(205Ah) docks with ease
medium distance pallet transfers. Smooth, rapid acceleration components and electronics are all protected within the robust 3 Emergency isolator located for instant and 9,0kWh(410Ah) 3 Motor cover swings out with operator
Li-ION technology Li-ION batteries ensures superbly efficient productivity in loading/unloading chassis structure. These features guarantee a longer operating actuation 3 Rapid full charge in 1h30min with opti- seat
mized charger
Rapid full charge Fits in 4 PzS SL compartment: 4,5kWh-9kWh (205Ah-410Ah) and transfer applications. The electrical steering, allied with life, delivering safe, efficient, and productive load handling.
Opportunity charging Includes battery housing extra weight a slim 820mm chassis width enables excellent maneuverabi-
Rapid intermediate charging Li-ION charger lity in confined areas and loading ramps. Service
Maintenance free Optimized 24V-Charger v255: full charging time 1h30min Efficiency at work and efficiency in servicing with cost effec-
Extended lifetime (4,5kWh) and 2h40min (9,0kWh) Comfort tive maintenance routines. Easy access to all components and
Linde Material Handling GmbH, Postfach 10 01 36, 63701 Aschaffenburg, Germany Phone
+49.6021.99-0, Fax +49.6021.99-1570, www.linde-mh.com, info@linde-mh.com
Technical Data according to VDI 2198
4.22 Fork dimensions DIN ISO 2331 s/e/l (mm) 55 x 165 x 1150 55 x 165 x 1600
4.25 Fork spread b5 (mm) 520/540/560/680 2) 520/540/560/680 2)
4.32 Ground clearance, centre of wheelbase m2 (mm) 30 8) 30 8)
b12 x l6
4.33 Load dimension b12 x l6 - 2x1200 x 800
(mm)
4.34 Aisle width predetermined load dimensions Ast (mm) - 3856 9) 10)
4.34.1 Aisle width for pallets 1000 × 1200 crossways Ast (mm) 2200 9) 11)
-
4.34.2 Aisle width with pallet 800 x 1200 along forks Ast (mm) 2250 9) -
4.35 Turning radius Wa (mm) 1745 / 1815 1) 2190 / 2260 1)
5.1 Travel speed, with/without load (km/h) 10 / 12 12) 10 / 12 12)
5.2 Lifting speed, with/without load (m/s) 0.039 / 0.048 4)
0.024 / 0.033 4)
Performance