Académique Documents
Professionnel Documents
Culture Documents
Models 0.5C to 8C
Notes
1. The torque data shown is for on/off 3. The RPMs shown are based on the age requirements outside this
service only, with 1 and 3 phase running torque of the actuator. range, consult Tyco Valves & Con-
asynchronous motors. 4. The running torques shown are the trols.
2. Rated torque is the maximum torque 15-minute continuous torques of the A = 230/460 VAC, 3 ph, 60 Hz
produced by the actuator when the actuator. For applications where the 380 or 415 VAC, 3 ph, 50 Hz
torque switch trips at the 100 percent running torques exceed these values B = 120 VAC, 1 ph, 60 Hz
setting. or for stroke times that exceed 15 110 VAC, 1 ph, 50 Hz
minutes, consult Tyco Valves & Con-
trols. C = 240 VAC, 1 ph, 60 Hz
220 VAC, 1 ph, 50 Hz
5. Rated torques are based on +10%,
- 15% of the rated voltage. For volt- D = 575 VAC, 3 ph, 60 Hz
Tyco reserves the right to change product designs and specifications without notice.
#2547 K7C2 / Printed in USA / INP / 5M / 5.99 / ©1999 Copyright © 1999 by Tyco International Ltd. Publication #2547 K7C2 5/99 p1