Académique Documents
Professionnel Documents
Culture Documents
Applications
Calfeutrement élastique des joints de dilatation sciés en sols industriels.
Joints horizontaux de carrelages et dallages intérieurs et extérieurs.
Joints horizontaux de parkings, routes, toitures, terrasses. Traitement
des fissures actives dans les surfaces horizontales. Joints de dilatation
entre terrasses et façades ou bordures. Joints de sols pour zones de
stockage et de production. Joints étanches en construction métallique.
Indications d'utilisation
A well-designed joint is a joint with a sufficient width so it would be able
to take and process the movement of the adjacent building elements.
The joint depth should always be in the correct relationship of the joint
width. A general rule is the ratio of joint depth to the width of the joint
with a joint width till 10 mm is 1:1, with a minimum of 5 mm in width and
depth. For joints wider than 10 mm, the ratio is 1:2 with a minimum
depth of at least 10 mm and a maximum of 15 mm.
Description du produits
ZWALUW POLYFLEX 950 est un mastic haut module.
Avantages
• Auto-nivelant, non bullant
Type PU
Couleurs standards
• Gris
Temp de durcissement @23°C/50% RH 3,0mm/day
Mise en peinture
Zwaluw Polyflex® 950 is paintable after full drying of sealant with water
based paints. It must be understood that sealants are elastomeric in
nature, enabling them to extend and compress within a construction
joint. Most paints are designed to be applied to hard, non-moving
surfaces and do not match the elastomeric properties of sealants.
Because sealants are soft and will extend and compress, if the paint
film does not move in an identical manner to the sealant, the paint may
crack and peel. It is always recommended to make test of compatibility
with the paint before application.