Académique Documents
Professionnel Documents
Culture Documents
Listado de referencias
And, 1995 Anderson, K.; Makkonen, P.; Person, J., “A Proposal to a Product
Modelling Language to Support Conceptual Design”, Annals of the
CIRP. Manufacturing Technology, Vol. 44, Núm. 1, 1995, 129-132.
And, 1987 Andreasen, M.M.; Hein, L., Integrated Product Development, IFS
(Publications) Ltd/Springer-Verlag, Reino Unido, 1987.
Bal, 1993 Ballu, A.; Mathieu, L., “Analysis of Dimensional and Geometrical
Specifications: Standards and Models”, Proceedings of 3rd CIRP Seminar
on Computer Aided Tolerancing, Cachan, Francia, Abril, 1993, 157-170.
Bal, 1995 Ballu, A.; Mathieu, L., “Univocal Expression of Functional and
Geometrical Tolerances for Design, Manufacturing and Inspection”,
Proceedings of the 4th CIRP Seminar on Computer Aided Manufacturing,
Tokyo, Abril, 1995, 31-52.
Bjö, 1989 Björke, O., Computer-Aided Tolerancing, ASME Press, 2da edición. New
York, 1989.
Bou, 1982 Bourdet, P., “Choix et Optimization des Cotes de Réglage”, Mécanique
Materiaux Electricité, Núm. 388, Abril, 1982, 151-156.
Bru, 1986 Brusola, F. et al., Acotación Funcional, Artes Gráficas Flores, Albacete,
1986.
Cha, 1990 Chase, K. W. et al., “Least Cost Tolerance Allocation for Mechanical
Assemblies with Automated Process Selection”, Manufacturing Review,
ASME, Vol. 3, Núm. 1, Marzo, 1990, 49-59.
Cha, 1991 Chase, K.W.; Parkinson, A.E., “A Survey of Research in the Application
of Tolerance Analysis to the Design of Mechanical Assemblies”,
Technical report, Mechanical Engineering Department, Brigham Young
University.
1996, 795-807.
Cha, 1997ª Chase, K.W. et al., “Tolerance Analysis of 2-D and 3-D Mechanical
Assemblies with Small Kinematics Adjustments”, en Parsaei, H. R. y
Zhang, H-C. (Eds.), “Advanced Tolerancing Techniques”, John Wiley &
Sons, Estados Unidos, 1997, 103-138.
Cha, 1997b Chase, K.W.; Magleby, S.P., “A Comprehensive System for Computer-
Aided Tolerance Analysis of 2-D and 3-D Mechanical Assemblies”,
Proceedings of the 5th International Seminar on Computer-Aided
Tolerancing, Toronto, Canada, Abril, 1997, 27-29.
Cha, 1999 Chase, K.W., “Tolerance Allocation Methods for Designers”, ADCATS
Report No. 99-6, Mechanical Engineering Department, Brigham Young
University, 1999, 34 pág.
Che, 1992 Chevalier, A., Dibujo Industrial, 2daEdición, Editorial UTEHA, México,
1992.
Ciu, 1997 Ciurana, J., “Contribució a les Bases Conceptuals per la Implantació de
l´Acotació Funcional Unidireccional en Sistemes CAD”, Tesis Doctoral,
Departamento de Ingeniería Mecánica, ETSEIB, Universitat Politècnica
de Catalunya, 1997.
Ciu, 2000ª Ciurana, J.; Riba, C., “Desarrollo de un Algoritmo para la Adaptación de
la Acotación Funcional Unidireccional en Sistemas CAD”, Revista
Iberoamericana de Ingeniería Mecánica, Vol. 4, Núm. 1, Marzo, 2000,
41-52.
Ciu, 2000b Ciurana, J.; Riba, C.; G.-Romeu de Luna, M. L., “Sistema Asistido para
la Formación de las Cadenas de la Síntesis de Cotas Unidireccional”,
Anales del XIV Congreso Nacional de Ingeniería Mecánica, Leganés,
Referencias Bibliográficas 177
Clé, 1994 Clément, A.; Riviére, A.; Temmerman, M., Cotation Tridimensionnelle
des Systèmes Mécaniques, PYC Edition, Francia, 1994.
Clé, 2000 Clément, A.; Rivière, A.; Serré, P., “Définition Formelle du
Tolérancement en CAO et en Métrologie”, Proceedings of the 3rd
International Conference on Integrated Design and Manufacturing in
Mechanical Engineering, Montreal, Canada, Mayo, 2000.
Cro, 1994 Cross, N.; Engineering Design Methods. Strategies for Product Design,
John Wiley & Son, 1994.
Des, 1984 Descotte, Y.; Latombe, J., “GARI: An Expert System for Process
Planning”, en Pickett, M.S. y Boyse, J.W. (Eds.), “Solid Modelling by
Computers: From Theory to Applications”, Plenum Press, Estados
Unidos, 1984.
Don, 1990 Dong, Z.S.; Soom, A., “Automatic Optimal Tolerances Design for
Related Dimension Chains”, Manufacturing Review, Vol. 3, Núm. 4,
1990, 262-271.
Emc, 1994 Emch, G.; Parkinson, A., “Robust Optimal Design for Worst-Case
Tolerances”, Journal of Mechanical Design, Transactions of the ASME,
Vol. 116, 1994, 1019-1025.
Enn, 1992 Ennis, C. W.; Gyeszly, S. W., “Results Obtained with a Method to
Improve Engineering Problem Formulation”, Journal of Mechanical
Design. Transactions of ASME, Vol. 114, Junio, 1992, 218-222.
178 Referencias Bibliográficas
Ete, 1993 Etesami, F., “A Mathematical Model for Geometric Tolerances”, Journal
of Mechanical Design, Transactions of the ASME, Vol. 115, 1993, 81-86.
Eva, 1974 Evans, D., “Statistical Tolerancing: The State of the Art. Part I.
Background”, Journal of Quality Technology, Vol. 6, Núm. 4, 1974, 188-
195.
Eva, 1975 Evans, D., “Statistical Tolerancing: The State of the Art. Part II. Methods
for Estimating Moments”, Journal of Quality Technology, Vol. 7, Núm.
1, 1975, 1-12.
Fai, 1986 Fainguelernt, D.; Weill, R.; Bourdet, P., “Computer Aided Tolerancing
and Dimensioning in Process Planning”, Annals of the CIRP (Berna),
Vol. 35, Núm. 1, 1986, 381-386.
Fen, 1991 Feng, S.C., “A Review of Current Geometric Tolerancing Theories and
Inspection Data Analysis Algorithms”, Report NISTIR-4509, National
Institute of Standards and Technology, Maryland, Estados Unidos, 1991,
19 pág.
Fos, 1997 Foster, L. W., Geo-Metrics IIIm. The Metric Application of Geometric
Dimensioning and Tolerancing Techniques, Addison-Wesley Longman,
Estados Unidos, 1997.
Flo, 1999 Floyd, S., “New Ideas Make Complex Solids Simple”, Machine Design,
Febrero 11, 1999, 62-72.
Fre, 1985 French, M.J., Conceptual Design for Engineers, Springer-Verlag, Berlín,
1985.
Gad, 1995 Gadh, R.; Printz, F.B., “Automatic Determination of Feature Interactions
in Design For Manufacturing Analysis”, Journal of Mechanical Design,
Referencias Bibliográficas 179
Gao, 1998ª Gao, J. et al., “Global Coordinate Method for Determining Sensitivity in
Assembly Tolerance Analysis”, Technical report, Mechanical
Engineering Department, Brigham Young University, 1988.
Gao, 1998b Gao, J. et al., “Global coordinate method for determining sensitivity in
assembly tolerance analysis”, Technical report, Mechanical Engineering
Department, Brigham Young University, 1988.
Gau, 1989 Gause, D.C.; Weinberg, G.M., Exploring Requirements. Quality Before
Design, Editorial Dorset House Publishing, Estados Unidos, 1989.
Har, 1996 Harutuman, V., et al., “Decision Making and Software Tools for Product
Development Based on Axiomatic Design Theory”, Annals of the CIRP.
Manufacturing Technology, Vol. 45, Núm. 1, 1996, 135-139.
Has, 1997 Hashemian, M.; Gu, P., “A Function Representation Scheme for
Conceptual Mechanical Design”, International Conference On
Engineering Design. ICED 97, Tampere, 1997, 65-70.
Hei, 1997 Heikkinen, A.; Korpela, T.; Leinonen, T., “A Method For Transferring
Data From Design To Manufacturing”, International Conference On
Engineering Design. ICED 97, Tampere, 1997, 19-21.
Hil, 1978 Hillyard, R.D.; Braid, I.C., “Analysis of Dimensions and Tolerances in
Computer Aided Mechanical Design”, Computer Aided Design, Mayo,
180 Referencias Bibliográficas
1978, 161-166.
Hsu, 1998 Hsu, W.; Woon, D., “Current Research in the Conceptual Design of
Mechanical Products”, Computer Aided Design, Vol. 30, Núm. 5, 1998,
377-389.
Hub, 1988a Hubka, V.; Eder, W.E., Theory of Technical Systems. A Total Concept
Theory for Engineering Design, Edit. Springer-Verlag, Alemania, 1988.
Hub, 1988b Hubka, V.; Andreasen, M.; Eder, W.E., Practical Studies in Systematic
Design, Butterworths, Gran Bretaña, 1988.
Hub, 1992 Hubka, V.; Eder, W.E., Engineering Design. General Procedural Model
of Engineering Design, Edición Heurista, Zürich, Suiza, 1992.
Hub, 1996 Hubka, V.; Eder, W.E., Design Science, Springer-Verlag, London Ltd.,
Gran Bretaña, 1996.
Jea, 1997 Jeang, A., “An Approach of Tolerance Design for Quality Improvement
and Cost Reduction”, International Journal of Production Research, Vol.
35, Núm. 5, 1997, 1193-1211.
Joh, 2000 Johannesson, H.; Söderberg, R., “Structure and Matrix Models for
Tolerance Analysis from Configuration to Detail Design”, Research in
Engineering Design, Núm. 12, 2000, 112-125.
33.
Kin, 1994 King, D.A.; de San Lazaro, A., “Process and Tolerance Considerations in
the Automated Design of Fixtures”, Journal of Mechanical Design,
Transactions of the ASME, Vol. 116, 1994, 480-486.
Kus, 1993 Kusiak, A.; Wang, J.; “Decomposition of the Design Process”, Journal of
Mechanical Design, Transactions of the ASME, Vol. 115, 1993, 687-695.
Kus, 1995 Kusiak, A.; Larson, N.; “Decomposition and Representation Methods in
Mechanical Design”, Journal of Mechanical Design, Transactions of the
ASME, Vol. 117, 1995, 17-24.
Lai, 1989 Lai, K; Wilson, W. R. D.; “FDL - A Language for Function Description
and Rationalization in Mechanical Design”, Journal of Mechanism,
Transmissions, and Automation in Design, Vol. 111, Marzo, 1989, 117-
123.
Lee, 1985 Lee, K.; Gossard, D.C., “A Hierarchical Data Structure for Representing
Assemblies: Part 1”, Computer Aided Design, Vol. 17, Núm. 1, Enero-
Febrero, 1985, 15-19.
Lin, 1981 Lin, V.C.; Gossard, D.C., “Variational Geometry in Computer Aided
Design”, Computer Graphics, Vol. 15, Núm. 3, 1981, 171-177.
Liu, 1996 Liu, S.C.; Hu, S.J.; Woo, T.C., “Tolerance Analysis for Sheet Metal
Assemblies”, Journal of Mechanical Design, Transactions of the ASME,
Vol. 118, 1996, 62-67.
Mad, 1966ª Madelmont, R., Notions de Cotation Fonctionnelle, Dunod, Paris, 1966.
Mad, 1966c Madelmont, R., Exercices de Cotation Fonctionnelle, Dunod, Paris, 1966.
Mal, 1995 Malmqvist, J.; "A Computer-Based Approach Towards Including Design
History Information in Product Models and Function-Means Trees",
Proceedings of the Design Theory and Methodology Conference - DTM,
1995, Boston, Estados Unidos, 593-602.
Man, 1998 Mantripragada, R.; Whitney, D.E., “The Datum Flow Chain: A
Systematic Approach to Assembly Design and Modeling”, Research in
Engineering Design, Núm. 10, 1998, 150-165.
Mar, 1992 Martino, P., “Simplifications of Feature Based Models for Tolerance
Analysis”, ASME, New York, Vol. 1, 1992, 329-341.
Mar, 1997 Marguet, B., Mathieu, L., “Tolerancing Problems for Aircraft Industries”,
Computer Aided Tolerancing, 5th CIRP Seminar, Abril, Toronto, Canadá,
1997.
Mat, 1997a Mathieu, L.; Ballu, A., “Virtual Gauge with Internal Mobilities for the
Verification of Functional Specifications”, Computer Aided Tolerancing,
5th CIRP Seminar, Abril, Toronto, Canadá, 1997.
184 Referencias Bibliográficas
Mat, 1997b Mathieu, L.; Clément, A.; Bourdet, P., “Modeling, Representation and
Processing of Tolerances, Tolerances Inspection: a Survey of Current
Hypothesis”, Computer Aided Tolerancing, 5th CIRP Seminar, Abril,
Toronto, Canadá, 1997, 39 pág.
Mau, 1998 Maury, H., et al., “Aplicación de las técnicas de Ingeniería Concurrente
al Diseño Mecánico”, XIII Congreso Nacional de Ingeniería Mecánica,
Universitat Politècnica de Catalunya, 1998.
McC, 1992 McCann, M.J., “An Algorithm for Locating Feature Patterns for the
Verification of Composite Positional Tolerancing”, Journal of
Mechanical Design, Transactions of the ASME, Vol. 114, 1992, 626-632.
Mor, 1996 Moroni, G.; Requicha, A.A.G., “Tolerance Modeling and Applications
Programming Interfaces”, Proceedings of IFIP. Symposium on Tools &
Methods for Concurrent Engineering, Budapest, Hungría, Mayo, 1996.
Nig, 1995 Nigan, S.D.; Turner, J., “Review of Statistical Approaches to Tolerance
Analysis”, Computer Aided Design, Vol. 27, Núm. 1, 1995, 6-15.
Ngo, 1998 Ngoi, B.K.A.; Agarwal, M.; Chua, C.S., “The Generic Capsule Approach
to Tolerance Stack Analysis”, International Journal of Production
Research, Vol. 36, Núm. 12, 1998, 3273-3293.
Pah, 1988 Pahl, G.; Beitz, W., Engineering Design. A Systematic Approach,
Springer-Verlag, Londres, 1988.
Referencias Bibliográficas 185
Pan, 1992 Panchal, K.R.; Pulat, S., “A Computer Aided Tolerance Assignment
Procedure (CATAP) for Design Dimensioning”, International Journal of
Production Research, Vol. 30, Núm. 3, 1992, 599-610.
Pér, 2000a Pérez, R.; Maury, H.; Riba, C.; "Sistemas Informáticos de Apoyo al
Diseño", Anales del XIV Congreso Nacional de Ingeniería Mecánica,
Leganés, Madrid, Diciembre , 2000, 531-536.
Pér, 2000b Pérez, R.; Ciurana, J.; Riba, C.; "Principales Enfoques en el Estudio de
las Dimensiones y Tolerancias", Anales del XIV Congreso Nacional de
Ingeniería Mecánica, Leganés, Madrid, Diciembre, 2000, 1833-1838.
Por, 1995 Portman, V., “Modelling Spatial Dimensional Chains for CAD/CAM
Applications”, Proceedings of the 4th CIRP Seminar on Computer Aided
Manufacturig, Tokyo, Abril, 1995, 71-84.
Pot, 1997 Potter, C., “The Engines of Mechanical Design”, Computer Graphics
World, Mayo, 1997, 31-36.
Pug, 1991 Pugh, S., Total Design. Integrated Methods for Successful Product
Engineering, Addison Wesley, Reino Unido, 1991.
Ram, 1998 Ramani, B.; Cheraghi, S. H.; Twomey, J. M., “CAD-Based Integrated
Tolerancing System”, International Journal of Production Research,
Vol. 36, Núm. 10, 1998, 2891-2910.
Req, 1980 Requicha, A.A.G., “Representation for Rigid Solids: Theory, Methods
and Systems”, Computing Surveys, Vol. 12, Núm. 4, 1980, 437-464.
Rib, 1994a Riba, C., Disseny i Càlcul de Màquines, CPDA, UPC, 1994.
Rib, 1994b Riba, C., “Una herramienta para la mejora del mantenimiento”,
Automática e Instrumentación, Núm. 241, Febrero, 1994, 52-54.
Rib, 1994c Riba, C., Disseny de màquines I. Mecanismes, TEM 13, Ediciones UPC,
1994.
Rib, 1994d Riba, C., Disseny de maquines I. Estructura Constructiva, TEM 14,
Ediciones UPC, 1994.
Riv, 1993 Rivest, L.; Fortin, C.; Morel, C., “Tolerancing a Solid Model with a
Kinematic Formulation”, 2nd Solid Modeling, Montreal, 1993, 357-366.
Referencias Bibliográficas 187
Rom, 1994 Romero S., F. et al., “Sistema de Diseño para Fabricación Basado en
Elementos Característicos”, XI Congreso Nacional de Ingeniería
Mecánica, 1994, 67-73.
Rop, 1966 Ropion, R., La Cotation Fonctionnelle des Dessins Techniques, DUNOB,
Paris, 1966.
Roy, 1988a Roy, U.; Liu, C.R., “Feature Based Representational Scheme of a Solid
Modeler for Providing Dimensioning and Tolerancing Information”,
Robotics and Computer Integrated Manufacturing, Vol. 4, Núm. 3-4,
1988, 335-345.
Roy, 1988b Roy, U.; Liu, C.R., “Establishment of Functional Relationships Between
Product Components in Assembly Database”, Computer Aided Design,
Vol. 20, Núm. 10, 1988, 570-580.
Roy, 1991 Roy, U.; Liu, C.R.; Woo, T.C., “Review of Dimensioning and
Tolerancing: Representation and Processing”, Computer Aided Design,
Vol. 23, Núm. 7, 1991, 466-483.
Roy, 2000 Roy, U.; Pramanik, N., “Function-to-Form Mapping for Tolerance
Synthesis: Part-II: Conceptual Design and Tolerance Synthesis”,
CAD/CAM Journal, Agosto, 2000.
Sal, 1995 Salomons, O.W. et al., “A Computer Aided Tolerancing Tool Based on
Kinematic Analogies”, Proceedings of the 4th CIRP Seminar on
Computer Aided Tolerancing, Tokyo, Abril, 1995, 53-72.
San, 1998 Sanz, A.; Rodríguez, P.; González, I.; Martín, R., “Consideraciones
Económicas para la Asignación de Cotas de Fabricación a partir de
Tolerancias de Diseño”, XIII Congreso Nacional de Ingeniería
Mecánica, Universitat Politècnica de Catalunya, 1998.
Seg, 1992 Seguí, J.; Romero, F.; Zamanillo, J. D., “Bases para la Asignación de
Tolerancias en Sistemas CAD/CAM. Validación Geométrica de Planes
de Fabricación”, Anales de Ingeniería Mecánica, Vol. 1, 1992, 37-43.
Ser, 1994 Serrano, J.; Romero, F.; Segui, J.; Zamanillo, J. D., “Obtención de una
Acotación de Fabricación Óptima a Partir de las Condiciones
Funcionales. Caso Unidireccional”, Anales del XI Congreso de
Ingeniería Mecánica, Vol. 3, 1994, 83-91.
Sin, 1996 Singh, V; Weston, R.H., “Life Cycle Support of Manufacturing Systems
Based on a Integration of Tools”, International Journal of Production
Referencias Bibliográficas 189
Smi, 1996 Smith, S., “Hybrid Modelling”, Computer Graphics World, Septiembre,
1996, 25-28.
Söd, 1999b Söderberg, R. et al, “Two-Step Procedure for Robust Design Using CAT
Technology”, Proceedings of the 6th CIRP International Seminar on
Computer Aided Tolerancing, Holanda, Marzo, 22-24, 1999.
Söd, 2000 Söderberg, R.; Lindkvist, L., “Robust Design & Tolerancing from
Concept to Process Selection”, 33th CIRP-International Seminar on
Manufacturing Systems, Stockholm, Suecia, Junio, 2000.
Sri, 1996 Srinivasan, S.; Wood, K.L.; McAdams, D.A., “Functional Tolerancing: A
Design for Manufacturing Methodology”, Research in Engineering
Design, Núm. 2, 1996, 99-115.
190 Referencias Bibliográficas
Sud, 2000 Sudarsan, R. et al., “Information Models for Design Tolerancing: From
Conceptual to the Detail Design”, Report NISTIR-6524, National
Institute of Standards and Technology, Maryland, Estados Unidos, 2000,
80 pág.
Suh, 1998 Suh, N., “Axiomatic Design Theory for Systems”, Research in
Engineering Design, Núm. 10, 1998, 189-209.
Sve, 1998 Svetko, R. et al., “New metrics for evaluating Monte Carlo tolerance
analysis of assemblies”, Technical report, Mechanical Engineering
Department, Brigham Young University. Disponible en URL:
http://adcats.et.byu.edu/WWW/Publication/index.html.
Tho, 2001 Thome, O.; Weber, C., “Tolsys - A Tolerance Support System Based on
Vectorial Tolerancing and Feature Technology”, XII ADM International
Conference. Associazione Nazionale Disegno di Macchine, DIEM c/o
Fac. Ingegneria, Bologna, Italia, Septiembre, 2001, (D4-1) - (D4-10).
Tho, 1999 Thornton, A.C., “A Mathematical Framework for the Key Characteristic
Process”, Research in Engineering Design, Núm. 11, 1999, 145-157.
Tru, 1988 Truslove, K.C.E., “The Implications of Tolerancing for Computer Aided
Mechanical Design”, Computer Aided Engineering Journal, 1988, 78-85.
Van, 1996 Van der Net, A.J. et al., “A Relation-Based Product Model Suited for
Integrating Design and Manufacturing”, Annals of the CIRP.
Manufacturing Technology, Vol. 45, Núm. 1, 1996, 161-164.
Referencias Bibliográficas 191
Van, 1998 Van der Net, A.J., “Designing and Manufacturing Assemblies”, Tesis
Doctoral, Eindhoven University of Technology, Holanda, 1998.
Val, 1990 Valaer, P.; Hall, J., “The Problem with Geometric Dimensioning and
Tolerancing”, Machine Design, Vol. 62, Núm. 17, 1990, 129-133.
VDI, 1986 VDI 2221, “Methodik zum Entwickeln und Konstruieren Technicher
Systeme und Produkte”, VDI-Verlag, Alemania, 1986.
Via, 1983 Viaud, J., “La Cotation Fonctionelle des Systèmes Mécaniques”,
Mécanique Materiaux Electricité, Núm. 398, Marzo-Abril, 1983, 8-12.
Vil, 1999b Villeneuve, F.; Legoff, O.; Bourdet, P., “Three-Dimensional Geometrical
Tolerancing in Process Planning”, 32nd CIRP Seminar on Manufacturing
Systems, Leuven, Bélgica, Mayo, 1999.
Viv, 1998 Vivancos, J.; Gomà A., J.R., “Desarrollo de una Metodología de Diseño
para la Fabricación y Montaje (DFMA) y de las Especificaciones de un
Paquete de Software que la Soporte”, XIII Congreso Nacional de
Ingeniería Mecánica, Universitat Politècnica de Catalunya, 1998.
Wan, 1993 Wang, N.; Oszoy, T.M., “Automatic Generation of Tolerance Chains
from Mating Relations Represented in Assembly Models”, ASME (New
192 Referencias Bibliográficas
Wan, 1995 Wang, Q.; Rao, M., “Intelligent Systems Approach to Conceptual
Design”, International Journal of Intelligent Systems, Vol. 10, 1995,
259-293.
Web, 1998 Weber, C.; Werner, B.; Thome, O., “Conversion of Geometrical
Tolerances into Vectorial Tolerance Representations – A Major Step
Towards Computer Aided Tolerancing”, International Design
Conference, Dubrovnik, Croacia, Mayo, 1998.
Wei, 1997 Weill, R., “Dimensioning and Tolerancing for Function”, en Parsaei, H.
R. y Zhang, H-C. (Eds.), “Advanced Tolerancing Techniques”, John
Wiley & Sons, Estados Unidos, 1997, 329-354.
Whi, 1996 Whitney, D.E., “The Potential for Assembly Modeling in Product
Development and Manufacturing”, Massachusetts Institute of
Technology, 1996, 53 pág.
Wil, 1992 Willhelm, R.; Stephen C.; Y. Lu, “Tolerance Synthesis to Support
Concurrent Engineering”, Annals of the CIRP, Vol. 41, 1992, 197-200.
Referencias Bibliográficas 193
Yu, 1994 Yu, K.M. et al., “A Review of Automatic Dimensioning and Tolerances
Schemes”, Engineering with Computers, Vol. 10, Núm. 2, 1994, 63-80.
Yue, 1988 Yuen, M.M.; Tan, S.T.; Yu, K.M., “Scheme for Automatic Dimensioning
of CSG Defined Parts”, Computer Aided Design, Vol. 20, Núm. 3, 1988,
151-159.
Zha, 1992 Zhang, C.; Wang, H.P.; Li, J.K., “Simultaneous Optimisation of Design
and Manufacturing – Tolerances with Process (Machine) Selection”,
Annals of the CIRP, Vol. 41, Núm. 1, 1992, 569-572.
Zha, 1995 Zhang, W.J.; Luttervelt, C.A., “On the Support of Design Process
Management in Integrated Design Environment”, Annals of the CIRP.
Manufacturing Technology, Vol. 44, Núm. 1, 1995, 105-108.
Zha, 1999 Zhang, C.; Luo, J., Wang, B., “Statistical Tolerance Synthesis using
Distribution Function Zones”, International Journal of Production
Research, Vol. 37, Núm. 17, 1999, 3995-4006.
Bases de Datos
ART, 2000 Article@INIST, Base de Datos en Línea, 2000, 20 de Abril del 2000,
http://www.inist.fr
BAS, 2000 Base de Datos ICYT, Base de Datos en Línea, 2000, 5 de Marzo del
2000, http://ebano.cti.csic.es:8080/
BIB, 2000 Biblioteca Digital, Base de Datos en Línea, 2000, 8 de Enero del 2000,
194 Referencias Bibliográficas
http://www.cbuc.es
BRI, 2000 British Library, Base de Datos en Línea, 2000, 10 de Mayo del 2000,
http://opac97.bl.uk
COM, 2000 Compendex™, Base de Datos, 2000, 10 de Mayo del 2000, Biblioteca
ETSEIB, Universitat Politècnica de Catalunya
CUR, 2000 Current Contents, Base de Datos en Línea, 2000, 4 de Abril del 2000,
http://www.bib.ub.es/bub/buberl.htm
FIR, 1999 First Search, Base de Datos en Línea (Privada), 1999, 15 de Septiembre
de 1999, http://www.ref.uk.oclc.org:2000
ISO, 2000 ISO, Lista de Comités Técnicos, Base de Datos en Línea Génova: ISO,
1988, 3 de Marzo del 2000, http://www.iso.ch/memf/memento. html
INS, 2000 Inspec™, Base de Datos, 2000, 15 de Abril del 2000, Biblioteca
ETSEIB, Universitat Politècnica de Catalunya
LIB, 2000 Library of Congress, Base de Datos en Línea, 2000, 21 de Abril del
2000, http://lcweb.loc.gov/z3950
SCI, 2000 Science Citation Index®, Base de Datos, 2000, 20 de Mayo del 2000,
Biblioteca ETSEIB, Universitat Politècnica de Catalunya
SER, 2000 The Serials Directory: An International Reference Book, Base de Datos
en Línea, 2000, 3 de Marzo del 2000, http://www.epnet.com/
hosttrial/login.html
SIG, 2000 SIGLE: System for Information on Grey Literature in Europe, Base de
Datos en Línea, 2000, 14 de Mayo del 2000, http://www.konbib.sigle
TES, 2000 Teseo, Base de Datos en Línea, 2000, 12 de Mayo del 2000,
http://www.mec.es/teseo
Referencias Bibliográficas 195
Páginas WEB
Hel, 2001 Helix Modeling, Base de Datos en Línea, 2001, 2 de Abril de 2001,
http://www.microcadam.com
Mac, 2001 Machine Design, Base de Datos en Línea, 2001, 8 de Febrero de 2001,
http://www.machinedesign.com
Mec, 2001 Mechanical Desktop (Autodesk Inc.), Base de Datos en Línea, 2001, 8
de Febrero de 2001, http://www3.autodesk.com
Tex, 2001 Texas Instruments, Base de Datos en Línea, 2001, 10 de Mayo de 2001,
http://www.bmpcoe.org/bestpractices/external/tids2/tids215.html
VAL, 2001 VALYSIS, TTI Inc., San José, CA (USA), Base de Datos en Línea, 2001,
15 de Junio de 2001, http://www.valisys.com
VSA, 2001 Variation Systems Analysis, Inc. (USA), Base de Datos en Línea, 2001,
25 de Septiembre de 2001, http://www.vsa.com