Académique Documents
Professionnel Documents
Culture Documents
195
[36] H. OKAMURA and K. OZAWA: "Mix design for Self-Compacting Concrete", Concrete
Library of JSCE, n°25, june, 1995.
[37] H. OKAMURA and K. OZAWA: "Self-Compactable High Performance Concrete in
Japan", International Workshop on High performance Concrete, Bangkok, 21-22 november,
1994.
[38] H. OKAMURA: "Self Compacting High Performance Concrete", Concrete International,
pp50-54, july, 1997.
[39] M. OUCHI, M. HIBINO and H. OKAMURA: "Effect of Superplasticizer on self
Compactability of Fresh Concrete", Transportation Research Board, 76 th annual meeting,
Washington, D.C., 12-16 january, 1997.
[40] M. OUCHI, K. OZAWA and H. HOKAMURA: "Development of a Simple Self-
compactability Testing Method for Acceptance at Job Site", Cairo 1rst Conference on
Concrete Structures, Cairo University, January, 1996.
[41] K. OZAWA, N. SAKATA and H. OKAMURA: "Evaluation of Self Compactibility of
Fresh Concrete using the Funnel Test", Concrete Library of JSCE, n°25, june, 1995.
[42] K. OZAWA, K. MAEKAWA and H. OKAMURA: "Development of High Performance
Concrete", Journal of the Faculty of Engineering, University of Tokyo Vol XLI, pp381-439,
1992.
[43] N. PASHIAS and D.V. BOGER: "A fifty cent rheometer for yield stress measurement",
Journal of Rheolology vol 40, issue 6, Nov/Dec, 1996.
[44] S. PERLO: "Validation du modèle de suspension solide pour les coulis à base de ciment
et d'addition minérale", Raport de stage de DEA, LCPC, juin, 1995.
[45] O. PETERSSON, P. BILLBERG and B. K. VAN: "A Model for Self-Compacting
Concrete", International Rilem Conference on "Production Methods and Workability of
Concrete", RILEM Proceedings 32, 1996.
[46] O. Petersson: Communication personnelle, 1998
[47] T. C. POWERS: "The properties of Fresh Concrete", Edited by John Wiley & Sons,
664p, 1968.
[48] J. SAKAMOTO, Y. H. MATSUOKA, T. SHINDOH and S. TANGTERMSIRIKUL:
"Application of Super Workable Concrete to Actual Construction", Conference Concrete
2000, Dundee, 7-9 September, 1993.
[49] W.R. SCHOWALTER and G. CHRISTENSEN: "Toward a rationalization of the slump
test for fresh concrte: comparisons of calculations and experiments", journal of rheology, 42
(4), pp865-870, july/august, 1998.
[50] T. SEDRAN: "Les bétons autonivelants (BAN). Synthèse bibliographique", Bulletin de
Liaison des Laboratoires des Ponts et Chaussées n°196, pp 53-60, Mars-Avril, 1995.
[51] T. SEDRAN et F. DE LARRARD: "René LCPC: un logiciel pour optimiser la granularité
des matériaux de génie civil", Bulletin de Liaison des Laboratoires des Ponts et Chaussées
n°194, nov./décembre, 1994.
[52] T. SEDRAN and F. DE LARRARD: "René-LCPC: a Software to Optimize the Mix
Design of High Performance Concrete", BHP 96, fourth International Symposium on the
Utilization of High Strength/High Performance Concrete, vol.2, pp 169-178, Paris, 29-31may,
1996.
[53] T. SEDRAN et F. DE LARRARD: "René LCPC: un logiciel pour optimiser la granularité
des matériaux de génie civil", Journées des sciences de l'ingénieur, Presqu'île de Giens,
France, 4-7 octobre, 1994.
[54] T. SEDRAN, F. DE LARRARD, F. HOURST and C. CONTAMINES: "Mix design of
Self-Compacting Concrete", RILEM International Conference on Production Methods and
Workability of Concrete, pp 439-451, Glasgow, Scotland, 3-5 june, 1996.
196
[55] M. SIDKY, C. LEGRAND et M. BARRIOULET: "Influence de la concentration en
granulats et du temps sur la ségrégation interne dans le béton frais", Matériaux et
Constructions, vol 15, n°85, pp 11-19, 1982.
[56] T. STOVALL, F. de LARRARD and M.BUIL: "Linear Packing Density Model of Grain
Mixtures", Powder Technology, vol 48, 1986.
[57] S. TANGTERMSIRIKUL and B.K. VAN: "Blocking criteria for Aggregate Phase of
Self-compacting High Performance Concrete", Proceedings of Regional Symposium on
Infrastructures Development in Civil Engineering, SC-4, pp 58-69, 19-20 December, 1995.
[58] Y. TANIGAWA and H. MORI: "Rheological Analysis of Slumping Behavior of Fresh
Concrete", Proceeding of the 29th Japan Congress on Materials Research Published by Soc. of
Mat. Science, Kyoto, pp 129-136, March, 1986.
[59] Y. TANIGAWA, H. MORI and K. WATANABE: "Computer simulation of consistency
and rheology test of fresh concrete by visco plastic finite element method.", Proceedings of
the RILEM Colloquium on "Properties of Fresh Concrete", pp301-308,Hanover, 3,5 october,
1990.
[60] Y. TANIGAWA, H. MORI and K. WATANABE: "Analytical Study of flow of Fresh
Concrete by Suspension Element Method", Proceedings of the RILEM Colloquium on
"Properties of Fresh Concrete", pp309-316,Hanover, 3,5 october, 1990.
[61] G. H. TATTERSALL: "Workability and Quality Control", E & F. SPON, 262 p, 1991.
[62] A. TRUDEL: "Mise au point d'un essai rapide de mesure de la résistance à la ségrégation
du béton frais", Rapport interne LCPC, septembre, 1995.
[63] H. UMEHARA, T. UEHARA, Y. ENOMOTO and S. OKA: "Development and Usage of
Lightweight High Performance Concrete", International Conference on High Performance
Concrete, ACI SP149 supplemantary papers pp 339-353, Singapore, 1994.
[64] B. K. VAN, D.G. MONTGOMERY, I. HINCZAK and K. TURNER: "Rapid testing
Methods for Segregation Resistance and Filling Ability of Self Compacting Concrete",
International RILEM Worshop on "Self-Compacting Concrete", Kochi, Japan, 23-26 august,
1998.
197
9. Annexe A:
Propriétés des matériaux du
chapitre 2
Important:
Les compacités des classes unidimensionnelles présentées dans les tableaux ci dessous, ne
sont pas des compacités virtuelles, mais des compacités calculées avec le même indice de
compaction que le constituant dont elles font partie.
198
Ciment CEM I 52.5 PM CP de St Vigor (Usine de Lafarge au Havre) avec 2% de résine
GT (en extrait sec)
199
Fumée de silice d'Anglefort qualité DM avec 5% de résine GT (en extrait sec)
200