Académique Documents
Professionnel Documents
Culture Documents
VN61973003665 VN61973003665
+
VN20291003621
Consignes de sécurité
Safety rules
Pour assurer la pleine sécurité il est impératif de respecter les consignes suivantes :
To insure full security, it is mandatory to follow the following instructions:
• Ce produit est prévu d’être installé par des poseurs qualifiés et formés.
• This material must be installed by qualified professionals
• Choisir un emplacement d’installation avec une surface stabilisée sensiblement mise de niveau
• Before mounting or uninstallation you have to define the best manoeuvre
• Dégager et baliser de manière visible l’aire de travail avant et pendant toute la durée des opérations
• Before and during all mounting operations, make sure the area is cleared and marked.
• Arrêter toute manoeuvre en cas de choc, de frottement ou d’efforts anormaux sur les éléments du produit.
• In case of shock, friction or other anomal thing, stop imediately.
• Suivre scrupuleusement la procédure d’installation/désinstallation ci-dessous
• Read and follow strictly the instructions.
• Mettre les EPI dès le début des opérations de montage/démontage
• Always wear the PPE from start to finish the installation.
• En cas de doute /risque sur la manoeuvre, arrêter les opérations et prendre toutes les précautions utiles.
• In case of any doubt about installation, security or product ( impact, friction or other anormal matter), stop
and take all suitable precautions to ensure your safety.
Outillage à Prévoir
2x Clé plate 19 Niveau à bulles
7 Cornière- Angle x2
8 Plastimodule- Plastimodule x8
12 Cornière L- Angle L x2
3 X8
2 X4
2
2 Sans Garde-corps Avec Garde-corps
2 X16 2 X16
18 X16
18 X16
2 X2
3
2 3 X2
X3
X2
2 X16
2 X32 2 X32
3 3
4 X16 4 X16
20
21
22 X8
15 X1
19
20 X8