Académique Documents
Professionnel Documents
Culture Documents
BILLES
POUDRES
POWDERS
SOMMAIRE
CATIONIC POWDERS ANIONIC POWDERS
POUDRES CATIONIQUES POUDRES ANIONIQUES
FLOPAM FO 4000 VHM 4 FLOPAM AN 900 VHM & VHMU 37
FLOPAM FO 4000 SSH 5 FLOPAM AN 900 SH & SHU 38
FLOPAM FO 4000 SH & SHU 7 FLOPAM AN 900 SD 40
FLOPAM CB 10 FLOPAM AN 900 SHD 41
FLOPAM FO 4000 11 FLOPAM AN 900 42
FLOPAM FO 8000 13 FLOPAM AN 900 HD 43
FLOPAM FO 4000 MPM 14 FLOPAM AN 900 MPM & MPMU 44
FLOPAM FO 4008 15 FLOPAM AN 900 BPM 45
FLORET FO 4000 PG0 & PG1 16 FLOPAM AN 900 VLM 46
FLORET FO 4000 PG2 & PG3 17 FLORET AN 900 PG0 47
FLOPAM FO 4000 AR 18 FLORET AN 900 PG1 48
FLOPAM FO 3001 19 FLORET AN 900 PG2 49
FLOBEADS KB 6 SH 20 FLOBEADS AB 50
FLOBEADS KB 6 21 FLOSTRENGTH RSB 51
FLOBEADS KB 6 PG1 22 FLOSTRENGTH RSP 9000 52
FLOBEADS DB 45 23 FLOPAM PWG & SEP 53
FLOQUAT TS 45 24
FLOSTRENGTH RSB 4000 25
MOLECULAR WEIGHT GRAPHS
FLOSTRENGTH RSP 4000 26
COURBES DE POIDS MOLÉCULAIRE
FLOPAM FO 4000 PWG & SEP 27
ANIONIC AND CATIONIC BEADS 56
FLOQUAT TS 45 PWG 28 BILLES ANIONIQUES ET CATIONIQUES
ANIONIC POWDERS 57
AMPHOTERIC POWDERS POUDRES ANIONIQUES
CATIONIC POWDERS 58
POUDRES AMPHOTÈRES POUDRES CATIONIQUES
FLOPAM FAM 30
PAPER GRADE ANIONIC POWDERS 59
FLOSTRENGTH RSB 4001 31 POUDRES ANIONIQUES POUR PAPIER
PAPER GRADE CATIONIC POWDERS 60
NON IONIC POWDERS POUDRES CATIONIQUES POUR PAPIER
FLOPAM AH 912 35
Sylvain MADELON, L’Atelier St Etienne
CATIONIC POWDERS
POUDRES CATIONIQUES
3
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg
Sacs
FLOPAM FO 4000 VHM
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
1/2
FO 4107 FO 4115 FO 4125 FO 4140 FO 4190 FO 4240 FO 4290 FO 4350 FO 4400
FLOPAM SSH SSH SSH SSH SSH SSH SSH SSH SSH
Charge density Ultra Low Very Low Very Low Very Low Low Low Medium Medium High
Densité de charge Ultra Faible Très Faible Très Faible Très Faible Faible Faible Moyenne Moyenne Forte
Molecular weight Very-high Very-high Very-high Very-high Very-high Very-high Very-high Very-high Very-high
Poids moléculaire Très haut Très haut Très haut Très haut Très haut Très haut Très haut Très haut Très haut
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 120 180 240 310 560 600 700 650 660
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 40 50 90 140 260 340 350 360 350
@ 1.0 g/l 20 20 30 50 120 140 120 150 150
Recommended operating concentration (g/l) 5 5 3 3 3 3 3 3 3
Concentration d’utilisation conseillée (g/l)
Dissolution time in Dl water @ 5 g/l @ 25°C (minutes) 150 150 150 120 120 120 90 90 90
Temps de dissolution dans l’eau distillée à 5 g/l à 25°C (minutes)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
FLOPAM FO 4000 SSH
Big bags 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg
Conteneurs souples
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
5
2/2
FO 4440 FO 4490 FO 4550 FO 4650 FO 4690 FO 4700 FO 4800
FLOPAM SSH SSH SSH SSH SSH SSH SSH
Charge density High High High High Very High Very High Very High
Densité de charge Forte Forte Forte Forte Très Forte Très Forte Très Forte
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.80 0.80 0.80 0.80 0.80 0.80 0.68
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 710 680 770 760 720 620 660
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 380 370 370 390 350 300 340
@ 1.0 g/l 180 170 170 170 160 140 150
Recommended operating concentration (g/l) 3 3 3 3 3 3 3
Concentration d’utilisation conseillée (g/l)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
FLOPAM FO 4000 SSH
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
1/3
FO 4115 FO 4125 FO 4140 FO 4190 FO 4240 FO 4290 FO 4290 FO 4350 FO 4350
FLOPAM SH SH SH SH SH SH SHU SH SHU
Charge density Very Low Very Low Very Low Low Low Low Low Medium Medium
Densité de charge Très Faible Très Faible Très Faible Faible Faible Faible Faible Moyenne Moyenne
Molecular weight High High High High High High High High High
Poids moléculaire Haut Haut Haut Haut Haut Haut Haut Haut Haut
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.80 0.80 0.80 0.80 0.85 0.85 0.80 0.85 0.80
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 120 150 230 280 415 510 340 625 350
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 50 50 100 130 180 230 140 340 140
@ 1.0 g/l 20 20 40 45 70 100 70 140 50
Recommended operating concentration (g/l) 5 5 5 4 4 4 4 4 4
Concentration d’utilisation conseillée (g/l)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
Big bags 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg
Conteneurs souples
FLOPAM FO 4000 SH & SHU
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
7
2/3
FO 4400 FO 4440 FO 4490 FO 4490 FO 4550 FO 4550 FO 4650 FO 4650 FO 4700
FLOPAM SH SH SH SHU SH SHU SH SHU SH
Charge density Medium Medium Medium Medium High High High High High
Densité de charge Moyenne Moyenne Moyenne Moyenne Forte Forte Forte Forte Forte
Molecular weight High High High High High High High High High
Poids moléculaire Haut Haut Haut Haut Haut Haut Haut Haut Haut
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.85 0.85 0.85 0.75 0.85 0.70 0.85 0.70 0.68
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 520 550 510 370 550 350 580 250 550
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 260 270 250 150 260 150 280 120 230
@ 1.0 g/l 110 100 90 60 100 100 100 50 100
Recommended operating concentration (g/l) 4 4 4 4 4 4 4 4 4
Concentration d’utilisation conseillée (g/l)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
Big bags 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg
Conteneurs souples
FLOPAM FO 4000 SH & SHU
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
3/3
FO 4800 FO 4990
FLOPAM SH SH
Charge density Very-high Very-high
Densité de charge Très forte Très forte
Packaging / Conditionnement
Bags 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
9
CB 120 CB 190
FLOPAM
Charge density Very low Low
Densité de charge Très faible Faible
Packaging / Conditionnement
Bags 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
1/2
FO 4115 FO 4140 FO 4190 FO 4240 FO 4290 FO 4350 FO 4440 FO 4490 FO 4650
FLOPAM
Charge density Very Low Very Low Low Low Low Medium Medium Medium High
Densité de charge Très faible Très faible Faible Faible Faible Moyenne Moyenne Moyenne Forte
Molecular weight Standard Standard Standard Standard Standard Standard Standard Standard Standard
Poids moléculaire Standard Standard Standard Standard Standard Standard Standard Standard Standard
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.80 0.80 0.80 0.85 0.85 0.85 0.85 0.85 0.85
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 60 110 230 330 285 450 400 450 500
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 20 50 100 150 150 200 200 210 220
@ 1.0 g/l 5 20 50 70 70 100 80 90 100
Recommended operating concentration (g/l) 5 5 5 5 5 5 4 4 4
Concentration d’utilisation conseillée (g/l)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
Big bags 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg
Conteneurs souples
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
11
2/2
FO 4700 FO 4800
FLOPAM
Charge density High Very-high
Densité de charge Forte Très forte
Packaging / Conditionnement
Bags 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 730 660 600 700
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 340 320 300 350
@ 1.0 g/l 105 110 110 110
Recommended operating concentration (g/l) 4 4 4 4
Concentration d’utilisation conseillée (g/l)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
13
FO 4650 FO 4800
FLOPAM MPM MPM
Charge density High Very High
Densité de charge Forte Très forte
Packaging / Conditionnement
Bags 25 kg 25 kg
Sacs
FLOPAM FO 4000 MPM
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.69 0.75 0.75 0.75 0.75 0.75
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 550 650 350 550 250 250
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 350 360 200 280 150 150
@ 1.0 g/l 120 140 100 130 80 50
Recommended operating concentration (g/l) 4 4 4 4 4 4
Concentration d’utilisation conseillée (g/l)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
15
Molecular weight Very High Very High High High High High
Poids moléculaire Très Haut Très Haut Haut Haut Haut Haut
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.80 0.80 0.80 0.80 0.85 0.85
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 450 500 300 500 600 700
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 230 310 130 200 310 350
@ 1.0 g/l 100 130 50 90 130 150
Recommended operating concentration (g/l) 3 3 5 4 4 4
Concentration d’utilisation conseillée (g/l)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
Molecular weight Standard Standard Standard Standard Standard Medium Medium Standard
Poids moléculaire Standard Standard Standard Standard Standard Moyen Moyen Standard
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.80 0.85 0.85 0.85 0.85 0.80 0.85 0.69
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 400 600 600 600 650 300 350 500
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 200 300 280 250 350 150 180 300
@ 1.0 g/l 80 140 110 130 150 60 80 110
Recommended operating concentration (g/l) 5 5 5 5 5 5 5 4
Concentration d’utilisation conseillée (g/l)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
Big bags 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg
Conteneurs souples
FLORET FO 4000 PG2 & PG3
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
17
FO 4191 AR
FLOPAM
Charge density Low
Densité de charge Faible
Packaging / Conditionnement
Bags 25 kg
FLOPAM FO 4000 AR
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
19
Packaging / Conditionnement
FLOBEADS KB 6 SH
Bags 25 kg 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 780 725 900 800
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 385 345 420 375
@ 1.0 g/l 145 135 150 145
Recommended operating concentration (g/l) 5 5 5 5
Concentration d’utilisation conseillée (g/l)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
21
KB 156 PG1
FLORET
Charge density Medium
Densité de charge Moyenne
Packaging / Conditionnement
FLORET KB 6 PG1
Bags 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
DB 45 DB 45 DB 45
FLOBEADS SH VHM
Charge density Very High Very High Very High
Densité de charge Très forte Très forte Très forte
Packaging / Conditionnement
FLOBEADS DB 45
Bags 25 kg 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
23
TS 45 TS 45 SH
FLOQUAT
Charge density Very High Very High
Densité de charge Très forte Très forte
Packaging / Conditionnement
Bags 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
25
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
Molecular weight High High High High High High High High
Poids moléculaire Haut Haut Haut Haut Haut Haut Haut Haut
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.80 0.80 0.80 0.80 0.80 0.80 0.85 0.85
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 120 120 230 230 280 280 415 415
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 50 50 100 100 130 130 180 180
@ 1.0 g/l 20 20 40 40 45 45 70 70
Recommended operating concentration (g/l) 5 5 5 5 4 4 4 4
Concentration d’utilisation conseillée (g/l)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
Big bags 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg
Conteneurs souples
FLOPAM FO 4000 PWG & SEP
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
27
TS 45 PWG TS 45 SH
FLOQUAT PWG
Charge density Very High Very High
Densité de charge Très forte Très forte
Packaging / Conditionnement
Bags 25 kg 25 kg
Sacs
FLOQUAT TS 45 PWG
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
DP/AD2114 FAM 4241 DP/AD2165 DP/AD2123 FAM 4351 FAM 4802 FAM 8401 FAM 8755
FLOPAM
Charge density Low Low Low Medium Medium High Medium High
Densité de charge Faible Faible Faible Moyenne Moyenne Haut Moyenne Haut
Molecular weight High High High High High High High High
Poids moléculaire Haut Haut Haut Haut Haut Haut Haut Haut
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 650 450 650 650 650 650 600 650
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 300 200 300 300 300 300 300 300
@ 1.0 g/l 150 100 150 150 100 100 150 150
Recommended operating concentration (g/l) 5 4 5 5 4 4 4 4
Concentration d’utilisation conseillée (g/l)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
Big bags 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg
Conteneurs souples
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
30
RSB 4071 H
FLOSTRENGTH
Charge density Low
Densité de charge Faible
Packaging / Conditionnement
Bags 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
Molecular weight Ultra High Ultra High Very High Very High Very High Very High High High
Poids moléculaire Ultra haut Ultra haut Très haut Très haut Très haut Très haut Haut Haut
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.75 0.60 0.75 0.60 0.80 0.80 0.75 0.75
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 220 240 100 120 50 65 80 80
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 60 75 25 40 20 15 20 25
@ 1.0 g/l 20 25 10 15 9 5 10 8
Recommended operating concentration (g/l) 5 5 5 5 5 5 5 5
Concentration d’utilisation conseillée (g/l)
Dissolution time in Dl water @ 5 g/l @ 25°C (minutes) 300 240 180 150 240 240 120 120
Temps de dissolution dans l’eau distillée à 5 g/l à 25°C (minutes)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
Big bags 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg
Conteneurs souples
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
AB 005
FLOBEADS V
Charge density Very Low
Densité de charge Très faible
Packaging / Conditionnement
Bags 25 kg
Sacs
FLOBEADS AB 005 V
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
34
Molecular weight Very High Very High Very High High High
Poids moléculaire Très haut Très haut Très haut Haut Haut
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 450 80 100 400 200
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 180 35 45 160 100
@ 1.0 g/l 100 15 10 60 30
Recommended operating concentration (g/l) 5 5 5 5 5
Concentration d’utilisation conseillée (g/l)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
POUDRES ANIONIQUES
36
Molecular weight Ultra High Ultra High Ultra High Ultra High Ultra High Ultra High Ultra High Ultra High Ultra High
Poids moléculaire Ultra Haut Ultra Haut Ultra Haut Ultra Haut Ultra Haut Ultra Haut Ultra Haut Ultra Haut Ultra Haut
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 1000 1200 1500 1700 1540 1800 2000 2000 2000
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 400 550 600 650 600 700 800 1000 1000
@ 1.0 g/l 100 170 140 200 250 260 300 300 350
Recommended operating concentration (g/l) 5 5 3 3 3 3 3 3 3
Concentration d’utilisation conseillée (g/l)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
Big bags 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg
Conteneurs souples
FLOPAM AN 900 VHM & VHMU
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
1/2
AN 905 AN 905 AN 910 AN 910 AN 913 AN 913 AN 923 AN 923 AN 926
FLOPAM SH SHU SH SHU SH SHU SH SHU SH
Charge density Very Low Very Low Low Low Low Low Medium Medium Medium
Densité de charge Très faible Très faible Faible Faible Faible Faible Moyenne Moyenne Moyenne
Molecular weight Very High Very High Very High Very High Very High Very High Very High Very High Very High
Poids moléculaire Très Haut Très Haut Très Haut Très Haut Très Haut Très Haut Très Haut Très Haut Très Haut
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.80 0.75 0.80 0.80 0.80 0.75 0.80 0.75 0.80
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 500 400 950 960 1300 1100 1600 1320 1700
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 250 180 450 400 500 600 600 680 650
@ 1.0 g/l 70 70 150 180 150 280 200 320 250
Recommended operating concentration (g/l) 5 5 5 5 5 5 3 3 3
Concentration d’utilisation conseillée (g/l)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
Big bags 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg
Conteneurs souples
FLOPAM AN 900 SH & SHU
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
38
2/2
AN 934 AN 934 AN 945 AN 945 AN 956 AN 977
FLOPAM SH SHU SH SHU SH SH
Charge density Medium Medium High High High Very High
Densité de charge Moyenne Moyenne Forte Forte Forte Très Forte
Molecular weight Very High Very High Very High Very High Very High Very High
Poids moléculaire Très Haut Très Haut Très Haut Très Haut Très Haut Très Haut
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.80 0.80 0.80 0.80 0.80 0.80
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 1800 1480 1820 1500 1850 1800
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 700 880 700 900 750 680
@ 1.0 g/l 300 320 280 400 300 280
Recommended operating concentration (g/l) 3 3 3 3 3 3
Concentration d’utilisation conseillée (g/l)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
Molecular weight Very High Very High Very High Very High Very High Very High Very High Very High
Poids moléculaire Très Haut Très Haut Très Haut Très Haut Très Haut Très Haut Très Haut Très Haut
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.90
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 250 300 450 570 750 780 820 1000
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 100 150 230 290 350 400 450 400
@ 1.0 g/l 50 80 130 180 180 200 220 130
Recommended operating concentration (g/l) 5 5 3 3 3 3 3 3
Concentration d’utilisation conseillée (g/l)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
FLOPAM AN 900 SD
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
Big bags 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg
Conteneurs souples
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
40
Molecular weight Very High Very High Very High Very High Very High Very High Very High Very High
Poids moléculaire Très Haut Très Haut Très Haut Très Haut Très Haut Très Haut Très Haut Très Haut
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.90
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 200 250 350 400 500 500 500 880
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 60 100 150 180 250 250 250 350
@ 1.0 g/l 30 40 60 80 100 100 100 100
Recommended operating concentration (g/l) 5 5 3 3 3 3 3 3
Concentration d’utilisation conseillée (g/l)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
FLOPAM AN 900 SHD
Sacs
Big bags 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg
Conteneurs souples
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.80 0.80 0.80 0.80 0.80 0.80 0.80
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 400 700 1000 1300 1650 1740 1600
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 200 350 420 500 630 680 650
@ 1.0 g/l 80 120 140 180 250 285 250
Recommended operating concentration (g/l) 5 5 5 3 3 3 3
Concentration d’utilisation conseillée (g/l)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
42
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.80 0.80 0.80 0.80 0.80 0.80 0.80
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 250 550 600 850 1000 1000 950
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 120 170 200 350 400 400 380
@ 1.0 g/l 50 70 80 140 140 140 140
Recommended operating concentration (g/l) 5 5 5 3 3 3 3
Concentration d’utilisation conseillée (g/l)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
FLOPAM AN 900 HD
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.80 0.80 0.80 0.80 0.80 0.80
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 350 800 1250 1320 1400 1260
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 150 300 450 520 500 475
@ 1.0 g/l 50 100 170 220 170 195
Recommended operating concentration (g/l) 10 8 8 8 8 8
Concentration d’utilisation conseillée (g/l)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
44
AN 934
FLOPAM BPM
Charge density Medium
Densité de charge Moyenne
Packaging / Conditionnement
Bags 25 kg
FLOPAM AN 900 BPM
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
AN 970
FLOPAM VLM
Charge density High
Densité de charge Forte
Packaging / Conditionnement
Bags 25 kg
FLOPAM AN 900 VLM
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
46
AN 923
FLORET PG0
Charge density Medium
Densité de charge Moyenne
Packaging / Conditionnement
FLORET AN 900 PG0
Bags 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
Packaging / Conditionnement
FLORET AN 900 PG1
Bags 25 kg 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
48
Packaging / Conditionnement
FLORET AN 900 PG2
Bags 25 kg 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
Molecular weight Very low Medium Very low Very low Very low
Poids moléculaire Très bas Moyen Très bas Très bas Très bas
Approximate bulk density 0.8 - 0.9 0.8 - 0.9 0.8 - 0.9 0.8 - 0.9 0.8 - 0.9
Densité apparente approximative
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
50
Packaging / Conditionnement
Bags 25 kg 25 kg
FLOSTRENGTH RSB
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
RSP 9100
FLOSTRENGTH
Charge density Low
Densité de charge Faible
Packaging / Conditionnement
Bags 25 kg
Sacs
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
52
1/2
FA 920 FA 920 AH 912 AH 912 AN 905 AN 905 AN 910 AN 910
FLOPAM PWG SEP PWG SEP PWG SEP PWG SEP
Charge density Non-ionic Non-ionic Very low Very low Very low Very low Low Low
Densité de charge Non ionique Non ionique Très faible Très faible Très faible Très faible Faible Faible
Molecular weight Very High Very High Very High Very High Very High Very High Very High Very High
Poids moléculaire Très haut Très haut Très haut Très haut Très haut Très haut Très haut Très haut
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.75 0.75 0.80 0.80 0.80 0.80 0.80 0.80
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 100 100 350 350 450 450 800 800
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 25 25 150 150 200 200 400 400
@ 1.0 g/l 10 10 60 60 80 80 130 130
Recommended operating concentration (g/l) 5 5 5 5 3 3 3 3
Concentration d’utilisation conseillée (g/l)
Dissolution time in Dl water @ 5 g/l @ 25°C (minutes) 180 180 150 150 90 90 90 90
Temps de dissolution dans l’eau distillée à 5 g/l à 25°C (minutes)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
Big bags 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg
FLOPAM AN PWG & SEP
Conteneurs souples
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
2/2
AN 913 AN 913 AN 923 AN 923 AN 934 AN 934 AN 956 AN 956
FLOPAM PWG SEP PWG SEP PWG SEP PWG SEP
Charge density Low Low Medium Medium Medium Medium High High
Densité de charge Faible Faible Moyenne Moyenne Moyenne Moyenne Forte Forte
Molecular weight Very High Very High Very High Very High Very High Very High Very High Very High
Poids moléculaire Très haut Très haut Très haut Très haut Très haut Très haut Très haut Très haut
Mesh size % > 10 mesh 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi 2 maxi
Granulométrie % < 100 mesh 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi 6 maxi
Approximate bulk density 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80
Densité apparente approximative
Approximate Brookfield viscosity (cps)* @ 5.0 g/l 1200 1200 1395 1395 1715 1715 1600 1600
Viscosité Brookfield approximative (cps)* @ 2.5 g/l 525 525 525 525 675 675 650 650
@ 1.0 g/l 160 160 180 180 195 195 200 200
Recommended operating concentration (g/l) 3 3 3 3 3 3 3 3
Concentration d’utilisation conseillée (g/l)
Storage temperature (°C) 0-35 0-35 0-35 0-35 0-35 0-35 0-35 0-35
Température de stockage (°C)
Packaging / Conditionnement
Bags 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg
Sacs
Big bags 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg 750 kg
FLOPAM AN PWG & SEP
Conteneurs souples
* Average values given as an indication. When choosing preparation and dosing equipment, a viscosity 10 times lower can be used.
Valeurs moyennes données à titre indicatif. Pour la sélection des appareils de dissolution, se baser sur une viscosité 10 fois plus faible.
# When the product is stored inside a building at a stable temperature between 5°C and 30°C.
Si le produit est stocké à l’intérieur d’un bâtiment à une température stable située entre 5°C et 30°C.
These data are given for information only. They do not constitute a specification and no liability is assumed, nor freedom from any existing patents.
Toutes ces informations sont données à titre indicatif. Elles ne constituent en rien une spécification et ne garantissent ni l’utilisation, ni la dépendance de brevets existants.
54
6
Cationic SH
KB 206 SH
KB 406 SH
5
KB 606 SH
4 Cationic Standard
KB 156
KB 206
KB 406
KB 606
Anionic
AB 305 MPM
AB 705 BPM
AB 995 V AB 995 BPM
AB 305 VLM
AB 005 V
0
0 10 20 30 40 50 60 70 80 90 100
Cationicity in mole %
56
FA 920
AH 912
AN 905
AN 910
AN 913
AN 923
AN 926
AN 934
AN 945
AN 956
AN 970
AN 977
20 VHM
SH
Standard
10
MPM
BPM
0
0 10 20 30 40 50 60 70
Anionicity in mole %
FO 4107
FO 4115
FO 4125
FO 4140
FO 4190
FO 4240
FO 4290
FO 4350
FO 4400
FO 4440
FO 4490
FO 4550
FO 4650
FO 4690
FO 4700
FO 4800
FO 4990
14
VHM
12
VHM
10
8 SSH
6 SH
4 Standard
FO 8650
FO 8850
FO 8990
0
0 10 20 30 40 50 60 70 80 90 100
Cationicity in mole %
58
AN 905
AN 923
AN 934
AN 945
20
PG0
PG1
PG2
10
FO 4140
FO 4190
FO 4240
FO 4290
FO 4350
FO 4440
14
12
10 PG0
8
PG1
KB 156 PG1
6
PG2
4
PG3
0
0 5 10 15 20 25 30 35
Cationicity in mole %
60
FA 920
AH 912
AN 905
AN 910
AN 913
AN 923
AN 934
AN 956
20
PWG, SEP
10
FO 4115
FO 4140
FO 4190
FO 4240
10
PWG, SEP
L’information présentée dans cette brochure est donnée de bonne foi. En l’état de nos connaissances actuelles, elle reflète la vérité.
Il est de la responsabilité de l’utilisateur de faire un bon usage des produits mentionnés à l’intérieur de cette brochure.
The information in this brochure is provided in good faith. To our knowledge it reflects the truth.