Académique Documents
Professionnel Documents
Culture Documents
FRANÇAIS ENGLISH
1 SCHNEIDER Drivers Management Properties
DRIVERS Manager UNITELWAY Driver MODBUS Test XWAY Test
A - Description A - Description
L’adaptateur XBT-Z925 permet le transfert d’applications entre un terminal et un PC, via le The XBT-Z925 adapter is used to transfer applications between a terminal and a PC, via the
24V DC USB UNITELWAY Driver V1.8 IE19
port USB. USB port.
Copyright © 1999-2005 Schneider Automation
Status : In operation Pour ce faire, il faut préalablement disposer du câble TSX-CUSB485 (à commander To do this, you need the TSX-CUSB485 cable (to be ordered separately) and the
XBT-Z925 séparément) ainsi que des drivers Uni-Telway à la version 1.8 ou supérieure. Ces drivers Uni-Telway drivers, version 1.8 or later. These drivers are available:
TSX-CUSB485 USB Configuration
sont disponibles : - on the terminal configuration software CD-ROM,
- sur le cédérom du logiciel de configuration des terminaux, - to order (reference TLX-CDDRV20M).
- sur commande (référence TLX-CDDRV20M).
Note: The transfer is no faster (or slower) than with XBT-Z915 or XBT-Z945 serial
Nota : Le transfert n’est pas plus rapide (ni plus lent) qu’avec les câbles série cables. The role of the TSX-CUSB485 cable and the XBT-Z925 adapter is to
XBT-Z915 ou XBT-Z945. Le rôle du câble TSX-CUSB485 et de l’adaptateur create a virtual serial communication port on the USB bus. The PCs must be
OK
XBT-Z925 est de créer virtuellement un port de communication série sur le running Windows 2000 or XP.
B bus USB. Les PC doivent être équipés de Windows 2000 ou XP.
2 UNITELWAY Configuration
B - Package contents
Station List
B - Contenu de l’emballage
Target 1 Adaptateur XBT-Z925(A) (RJ45/RJ45) 1 XBT-Z925(A) adapter (RJ45/RJ45)
Target station:
station (Default)
StationID Port Password PhoneNumber Parity 2 Adaptateur XBT-Z925(B) (25-pin SUB-D/RJ45) 2 XBT-Z925(B) adapter (25-pin SUB-D/RJ45)
-> (Default) COM4 Odd
3 Instruction de service 3 Quick reference guide
Password
1 Cliquer sur l’onglet "UNITELWAY Drivers".
drivers/Drivers manager".
1 Click the "UNITELWAY Drivers" tab.
Cliquer sur le bouton "Configuration". Click the "Configuration" button.
Adaptateur XBT-Z925 2 Cliquer sur le bouton "Modifier". 2 Click the "Edit" button.
3 Choisir le port COM contenant la référence du câble USB (TSX-CUSB485).
XBT-Z925 adapter OK Cancel
Cette information n’apparaît que si le driver du câble TSX-CUSB485 a été
3 Select the COM port containing the USB cable reference (TSX-CUSB485).
This information only appears if the TSX-CUSB485 cable driver has already been
préalablement installé. installed.
Se référer au manuel d’installation du câble TSX-CUSB485. Please refer to the TSX-CUSB485 cable installation manual.
4 4 Le sélecteur rotatif du câble TSX-CUSB485 doit être positionné sur 0 ou 1 (les positions 4 The rotary selector switch on the TSX-CUSB485 cable must be set to 0 or 1 (positions
2 et 3 entraînent l’absence de communication). 2 and 3 result in no communication).
La position du sélecteur situé sur le côté n’a aucun impact sur la communication. The position of the selector switch on the side has no effect on communication.
Une fois le câble XBT-Z925 connecté au terminal, ce dernier doit afficher "Waiting for Once the XBT-Z925 cable is connected to the terminal, the terminal must display
1
transfert". Si le terminal n’affiche pas ce message, retourner le câble XBT-Z925(A) : au "Waiting for transfer". If the terminal does not display this message, turn the
2
3
0
lieu de connecter l’embout numéroté 1 au terminal, y connecter l’embout numéroté 2 XBT-Z925(A) cable round: instead of connecting cable end 1 to the terminal, connect
car ce câble a deux embouts qui ne sont pas symétriques. cable end 2 as this cable has two cable ends that are not symmetrical.
5 Pour réutiliser un câble série classique (XBT-Z915 ou XBT-Z945), choisir le port COM1. 5 To use a standard serial cable (XBT-Z915 or XBT-Z945), select the COM1 port. Then
Connecter ensuite le câble sur le port de communication choisi. connect the cable to the selected communication port.
E - Diagnostic E - Diagnostics
5 Station Parameters
Uni-telway Line Parameters Advanced Comportement sur erreur Behavior in the event of an error
Station ID
- Le logiciel de configuration affiche le message "Pas de terminal connecté": - The configuration software displays the message "No terminal connected":
(Default)
- Le câble XBT-Z925 est mal connecté. - The XBT-Z925 cable is not connected correctly.
Instruction de service - Le câble TSX-CUSB485 n’est pas connecté sur le port USB. - The TSX-CUSB485 cable is not connected to the USB port.
- Le driver n’est pas correctement configuré. - The driver is not configured correctly.
Instruction sheet COM Port
- Le driver du câble TSX-CUSB485 n’est pas installé. - The TSX-CUSB485 cable driver is not installed.
COM1
Bedienungsanweitsung - Le sélecteur du câble TSX-CUSB485 est positionné sur 2 ou 3. Le transfert ne - The selector switch on the TSX-CUSB485 cable is set to 2 or 3. Transfer is only
UNI-TELWAY Slave Adress fonctionne que si le sélecteur se trouve sur les positions 0 ou 1. possible if the selector switch is in position 0 or 1.
Istruzioni di servizio Base 1 Numbers 3
- Retourner le câble XBT-Z925(A) car ce câble a deux embouts qui ne sont pas - Turn the XBT-Z925(A) cable round as this cable has two cable ends that are not
symétriques.
Instrucción de servicio - Ne pas utiliser l’adaptateur XBT-ZN999 avec le câble XBT-Z925(B).
symmetrical.
Modem Communication
- Do not use the XBT-ZN999 adapter with the XBT-Z925(B) cable.
快速参考指南 Use Modem
- Vérifier que sur un XBTN sans logo Telemecanique l’adaptateur XBT-ZN999 est - On an XBTN without Telemecanique logo, check that the XBT-ZN999 adapter is
bien placé entre la sortie du convertisseur USB et le câble XBT-Z925(A). correctly positioned between the USB converter output and the XBT-Z925(A)
Hayes cable.
- Le logiciel de configuration affiche le message "Accès au driver de communication
Phone number
impossible" : - The configuration software displays the message "Cannot access the communication
Password - Le driver Uni-Telway n’est pas configuré sur le bon port de communication. Par driver":
exemple, le driver est configuré pour utiliser le port USB, mais aucun câble USB - The Uni-Telway driver is not configured on the correct communication port. For
n’est connecté. example, the driver is configured to use the USB port, but no USB cable is
35011364 02 OK Cancel - Le terminal n’affiche pas le message "Waiting for transfer":
connected.
04/2007 - Retourner le câble XBT-Z925(A) car ce câble a deux embouts qui ne sont pas - The terminal does not display the message "Waiting for transfer":
symétriques. - Turn the XBT-Z925(A) cable round as this cable has two cable ends that are not
symmetrical.
DEUTSCH ITALIANO ESPAÑOL 简体中文
A - Beschreibung A - Descrizione A - Descripción A - 描述
Der Adapter XBT-Z925 ermöglicht die Übertragung von Applikationen zwischen einem L'adattatore XBT-Z925 consente il trasferimento di applicazioni tra un terminale e un PC El adaptador XBT-Z925 permite realizar transferencias de aplicaciones entre un terminal y
Bedienterminal und einem PC über den USB-Port. attraverso la porta USB. un PC, a través del puerto USB. 使用 XBT-Z925 适配器可以通过 USB 端口在终端与 PC 之间传输应用程序。
Hierzu sind ebenfalls das Kabel TSX-CUSB485 (separat zu bestellen) sowie A tale scopo è necessario disporre innanzitutto del cavo TSX-CUSB485 (venduto Para ello, es necesario disponer previamente del cable TSX-CUSB485 (se solicita por 为此,您需要使用 TSX-CUSB485 电缆(单独提供)和 Uni-Telway 驱动程序 1.8 版或更
Uni-Telway-Treiber ab Version 1.8 erforderlich. Diese Treiber sind verfügbar: separatamente) e dei driver Uni-Telway versione 1.8 o superiore. Questi driver sono separado), así como de controladores Uni-Telway de la versión 1.8 o superior. Estos 高版本。 这些驱动程序可通过以下方式获得 :
- auf der CD-Rom mit der Konfigurationssoftware für die Bedienterminals, disponibili : controladores puede conseguirlos: - 终端配置软件的 CD-ROM
- auf Bestellung (Bezugsnummer TLX-CDDRV20M). - sul CD-ROM del software di configurazione dei terminali, - En el CD-ROM del software de configuración de los terminales. - 订购 (参考 TLX-CDDRV20M)
- su ordinazione (rif. TLX-CDDRV20M). - Por encargo (referencia TLX-CDDRV20M).
Hinweis: Die Übertragungsgeschwindigkeit ist weder höher noch niedriger als mit
den Kabeln der Serie XBT-Z915 oder XBT-Z945. Aufgabe des Kabels Nota: Il trasferimento non è né più rapido né più lento che con i cavi della serie Nota: la transferencia no es más rápida (ni más lenta) que con los cables de la 注: 传输不会比使用 XBT-Z915 或 XBT-Z945 串行电缆更快 (或更慢) 。
TSX-CUSB485 und des Adapters XBT-Z925 ist die Einrichtung eines XBT-Z915 o XBT-Z945. La funzione del cavo TSX-CUSB485 e dell'adattatore serie XBT-Z915 o XBT-Z945. La función del cable TSX-CUSB485 y del TSX-CUSB485 电缆和 XBT-Z925 适配器的作用是在 USB 总线上创建虚拟串行
virtuellen seriellen Kommunikationsports auf dem USB-Bus. Die PCs XBT-Z925 è quella di creare virtualmente una porta di comunicazione seriale adaptador XBT-Z925 es crear virtualmente un puerto de comunicación serie 通讯端口。 PC 必须运行的是 Windows 2000 或 XP。
müssen über Windows 2000 oder Windows XP verfügen. sul bus USB. I PC devono essere dotati di Windows 2000 o XP. en el bus USB. Los PC deben estar equipados con Windows 2000 o XP.
3 Bedienungsanleitung
3 Istruzioni di servizio 3 Instrucciones de servicio 3 快速参考指南