Académique Documents
Professionnel Documents
Culture Documents
Sommaire / Summary
1- Outils et visserie / Tools and screws............... p2
Page 1 sur 17
Instructions d'assemblage / Instructions for assembly R6 Siege Drone FAN-ART
Outils / Tools :
- Cutter
- Tourne vis hexagonal diamètre M2 / Hexagonal screw driver diameter M2
- Tourne vis hexagonal diamètre M3 / Hexagonal screw driver diameter M2
- Décapeur thermique / Heat gun
- Ciseaux / Cisors
Visserie / Screws :
Type Quantité / Quantity
Lentille caméra Type 1
montage M12
Micro: 9*7mm 1
Led 3mm 6
Page 2 sur 17
Instructions d'assemblage / Instructions for assembly R6 Siege Drone FAN-ART
AVERTISSEMENT : je conseille fortement d'imprimer les pièces unes par unes, les photos ci-
dessous sont seulement une visualisation de celles-ci sur votre plateau.
WARNING : I strongly advise to print each piece separately, the pictures below represent only a
visualization of the parts on your print bed.
Réglages / settings :
Page 3 sur 17
Instructions d'assemblage / Instructions for assembly R6 Siege Drone FAN-ART
Roues / Wheels :
Réglages / settings :
J'utilise un support d'impression à 5mm de l'objet et un angle de environ 84° pour éviter de remplir tout
l'espace où viendront s'installer les rouleaux. Retirer le support est plus facile et le rendu beaucoup plus
propre.
I use a support at 5mm from the object and an angle of approximately 84° to avoid filling all the space
where the rollers will be installed. Removing the suppory is easier and makes it much cleaner.
Page 4 sur 17
Instructions d'assemblage / Instructions for assembly R6 Siege Drone FAN-ART
Rouleaux / Rollers:
Pour les rouleaux, utiliser un angle léger (~24°) en radeau permet d'éviter que les pièces ne se décollent
pendant l'impression.
For rollers using a light angle (~24°) will prevent it to peeling off the print bed.
Page 5 sur 17
Instructions d'assemblage / Instructions for assembly R6 Siege Drone FAN-ART
Le meilleur moment pour personnaliser votre drone est avant le montage. Si vous avez imprimé les pièces
vous mêmes ou avez reçu un kit, vous pouvez polir les pièces pour que le rendu de la peinture soit lisse et
sans défauts.
The best time to customize your drone is before you build it. If you printed the parts yourself or received a
kit, you can polish the parts so that the results of the paint is smooth and flawless.
Page 6 sur 17
Instructions d'assemblage / Instructions for assembly R6 Siege Drone FAN-ART
Page 7 sur 17
Instructions d'assemblage / Instructions for assembly R6 Siege Drone FAN-ART
Page 8 sur 17
Instructions d'assemblage / Instructions for assembly R6 Siege Drone FAN-ART
Récupérer la lentille:
Dévisser le capuchon
Page 9 sur 17
Instructions d'assemblage / Instructions for assembly R6 Siege Drone FAN-ART
Page 10 sur 17
Instructions d'assemblage / Instructions for assembly R6 Siege Drone FAN-ART
Seconde étape : préparer les rouleaux / Second step : prepare the rollers
Ils sont déjà prêts si vous avez reçu un Kit complet, vous pouvez passer à leur assemblage.
They are ready if you have received a complete Kit, you can proceed to their assembly.
Utilisez le tuteur à imprimer présent dans le fichier .STL pour découper la gaine thermo rétractable, un
morceau par rouleau / Use the printout tutor present in the . STL file to cut the Heat shrinkable sleeve, one
piece for each roller.
Insérez les rouleaux dans la gaine découpée / Insert the rollers into the cuted Heat shrinkable sleeve
Page 11 sur 17
Instructions d'assemblage / Instructions for assembly R6 Siege Drone FAN-ART
Pour les fixer aux roues, je conseil de commencer par en mettre un sur deux pour pouvoir visser plus
facilement / To fadd them to the wheels I advise to start by putting one out of two to be able to screw more
easily.
M2*6
Page 12 sur 17
Instructions d'assemblage / Instructions for assembly R6 Siege Drone FAN-ART
Page 13 sur 17
Instructions d'assemblage / Instructions for assembly R6 Siege Drone FAN-ART
Page 14 sur 17
Instructions d'assemblage / Instructions for assembly R6 Siege Drone FAN-ART
Page 15 sur 17
Instructions d'assemblage / Instructions for assembly R6 Siege Drone FAN-ART
Page 16 sur 17
Instructions d'assemblage / Instructions for assembly R6 Siege Drone FAN-ART
Page 17 sur 17