Académique Documents
Professionnel Documents
Culture Documents
AOP-2 (C) The Identification of Ammunition NATO 2008
AOP-2 (C) The Identification of Ammunition NATO 2008
AOP-2(C)
AOP-2(C)
THE IDENTIFICATION
IDENTIFICATION DES
OF AMMUNITION
MUNITIONS
DECEMBER 2008
ORIGINAL I
(Reverse Blank/Verso blanc)
NATO UNCLASSIFIED
AOP-2(C)
11 December/decembre 2008
1.
AOP-2(C) - THE IDENTIFICATION OF
AMMUNITION is a NATO UNCLASSIFIED
publication. The agreement of nations to use
this publication is recorded in STANAG
2953.
1.
L'AOP-2(C) -IDENTIFICATION DES
MUNITIONS est une publication OTAN
SANS CLASSIFICATION. L'accord par
lequel les pays se sont engagees a utiliser
cette publication a ete consigne dans Ie
STANAG 2953.
2.
AOP-2(C) - is effective on receipt. It
supersedes AOP-2(B) dated February 1991
which shall be destroyed in accordance with
the local procedure for the destruction of
documents.
2.
L'AOP-2(C) entre en vigueur des
reception. Elle remplace l'AOP-2(B) de
Fevrier 1991 qui devra etre detruite selon la
procedure de destruction des documents.
Juan . MORENO
Vice dmiralNice-amiral, ESP(N)
Direc or NATO Standardization Agency
Directeur de l'Agence OTAN de nonmalisation
ORIGINAL III
(Reserve BlankNerso blanc)
OTAN SANS CLASSIFICATION
NATO UNCLASSIFIED
AOP-2(C)
ORIGINAL V
(Reverse Blank/Verso blanc)
NATO UNCLASSIFIED
PART
CHAPTER
CHAPITRE
AOP-2(C)
ORIGINAL VII
(Reverse Blank/Verso blanc)
NATO UNCLASSIFIED
AOP-2(C)
RECORD OF CHANGES
ENREGISTREMENT DES MODIFICATIFS
Change N.
and Date
Date
entered
Effective
Date
Entered by
N et date du
Modificatif
Date
d'Insertion
Date d'entre
en vigueur
Insr par
ORIGINAL IX
NATO UNCLASSIFIED
AOP-2(C)
Identification of
Correction
Date
entered
Identification de
la correction
Date
d'insertion
Inscrite par
(Signature; grade; nom de l'unit, du navire ou de
l'tablissement)
ORIGINAL XI
NATO UNCLASSIFIED
AOP-2(C)
Date
checked
Checked by
(Signature; rank; name of unit,
ship or establishment)
Date
checked
Checked by
(Signature; rank; name of unit,
ship or establishment)
Date de
vrification
Effectue par
(Signature; grade; nom de l'unit,
du navire ou de l'tablissement)
Date de
vrification
Effectue par
(Signature; grade; nom de l'unit,
du navire ou de l'tablissement)
ORIGINAL XIII
NATO UNCLASSIFIED
AOP-2(C)
TABLE OF CONTENTS
TABLE DES MATIERES
Title Page
Page titre
III
Reservations by Nations
Rserves nationales
VII
Record of Changes
Enregistrement des modificatifs
IX
XI
XIII
Table of Contents
Table des matires
XV
Preface
Prface
XXXVII
ORIGINAL XV
NATO UNCLASSIFIED
AOP-2(C)
7.
7.1.
7.2.
INTRODUCTION
INTRODUCTION
SIGNIFICANCE OF COLOURS
SIGNIFICATION DES COULEURS
MINIMUM MARKINGS
MARQUAGES MINIMALES
ADDITIONAL MARKINGS
MARQUAGES SUPPLEMENTAIRES
USE OF ABBREVIATIONS
ABRVIATIONS UTILISES
7.3.
TYPES OF MARKING
TYPES DE MARQUAGES
7.4.
COLOR OF MARKING
COULEUR DES MARQUES
COLOUR OF SYMBOLS
COULEUR DES SYMBOLES
7.5.
7.6.
ORIGINAL XVII
NATO UNCLASSIFIED
8.
8.1.
8.2.
8.3.
8.4.
9.
9.1.
9.2.
9.3.
9.4.
AOP-2(C)
Cancellation
Annulation
10
Symbol of interchangeability
Symbole marquant linterchangeabilit
10
10
10
Cancellation
Annulation
11
GENERAL
GENERALITES
MARKING OF BULLETS
MARQUAGES DES BALLES
GENERAL
GENERALITES
MINIMUM MARKINGS
MARQUES MINIMALES
ORIGINAL XIX
NATO UNCLASSIFIED
AOP-2(C)
GENERAL
GENERAL
METHODS OF IDENTIFICATION
METHODES DIDENTIFICATION
COLOUR OF MARKINGS
COULEURS DES MARQUES
SPECIAL MARKINGS
MARQUES SPECIALES
MARKINGS - GENERAL
MARQUES - GENERALITES
INTRODUCTION
INTRODUCTION
DEFINITION OF PACKAGES
DEFINITION DES EMBALLAGES
ORIGINAL XXI
NATO UNCLASSIFIED
AOP-2(C)
SMOKE
FUMIGENES
INCENDIARY
MUNITIONS INCENDIAIRES
PRACTICE
MUNITIONS DEXERCICE
LIST OF ANNEXES
LISTE DES ANNEXES
ANNEX A :
HIGH EXPLOSIVE
EXPLOSIF BRISANT
SMOKE
FUMIGENE
ARMOUR DEFEATING
ANTIBLINDAGE
ORIGINAL XXIII
NATO UNCLASSIFIED
AOP-2(C)
INCENDIARY
INCENDIAIRE
COUNTERMEASURE
CONTRE-MESURE
ILLUMINATING
ECLAIRANT
CHEMICAL
CHIMIQUE
PRACTICE
EXERCICE
CANISTER
BOITE A MITRAILLE
PROPELLANT
CHARGE PROPULSIVE
BALL
BALLE ORDINAIRE
TRACER
BALLE TRACEUSE
ARMOUR PIERCING
BALLE PERFORANTE
INCENDIARY
INCENDIAIRE
RIFLE GRENADE
CARTOUCHE POUR TIR DE GRENADE
DUMMY
CARTOUCHE INERTE
ORIGINAL XXV
NATO UNCLASSIFIED
AOP-2(C)
HIGH EXPLOSIVE
EXPLOSIF
ORIGINAL XXVII
NATO UNCLASSIFIED
AOP-2(C)
PRACTICE
EXERCICE
ANNEX F :
HIGH EXPLOSIVE
EXPLOSIF BRISANT
ARMOUR DEFEATING
ANTIBLINDAGE
ILLUMINATING
ECLAIRANT
INCENDIARY
INCENDIAIRE
COUNTERMEASURE
CONTRE-MESURE
PRACTICE
EXERCICE
ORIGINAL XXIX
NATO UNCLASSIFIED
AOP-2(C)
ANNEX H : NATIONAL ANNEX (CZE, HUN AND POL) COLOUR CODES AND MARKING
OF LAND FORCES AMMUNITION
ANNEXE NATIONALE (CZE, HUN AND POL) CODES DES COULEURS ET
MARQUAGES DES MUNITIONS DES FORCES TERRESTRES
1
PROJECTILES, WARHEADS AND BOMBS
PROJECTILES, TETES EXPLOSIVES ET BOMBES
HIGH EXPLOSIVE
EXPLOSIF BRISANT
SMOKE
FUMIGENE
ARMOUR DEFEATING
ANTIBLINDAGE
INCENDIARY
INCENDIAIRE
ILLUMINATING
ECLAIRANT
CONCRETE DEFEATING
PRACTICE
EXERCICE
DUMMY
EXERCICE
20 - 40 MM PROJECTILES
PROJECTILES 20 - 40 MM
DUMMY
EXERCICE
ORIGINAL XXXI
NATO UNCLASSIFIED
AOP-2(C)
PRACTICE
EXERCICE
PRACTICE
EXERCICE
PROJECTILES BELOW 20 MM
CALIBRE INFERIEUR A 20 MM
BALL
BALLE ORDINAIRE
TRACER
BALLE TRACEUSE
ARMOUR PIERCING
BALLE PERFORANTE
INCENDIARY
BALLE INCENDIAIRE
REDUCED
BALLE A CHARGE REDUITE
REDUCED
BALLE A CHARGE REDUITE
REDUCED TRACER
BALLE A CHARGE REDUITE TRACEUSE
OBSERVING
BALLE DE REGLAGE
TRAINING
BALLE DENTRAINEMENT
BLANK
CARTOUCHE A BLANC
ORIGINAL XXXIII
NATO UNCLASSIFIED
AOP-2(C)
DUMMY
INERTE
ANNEX I :
ANNEX J :
10
13
13
14
15
15
16
16
ORIGINAL XXXV
NATO UNCLASSIFIED
AOP-2(C)
PREFACE
PREFACE
1.
This AOP is compiled on the direction of the
NATO Standardization Agency. Ratifying nations agree
to standardize on the methods of Colour and Marking
Coding described in this AOP for the identification of
Ammunition. This AOP and its covering STANAG 2953
have been revised in Edition C to encompass the whole
field previously covered by STANAGS 2315, 2316, 2320,
2321, 2322 and 2374.
1.
Le prsent AOP est ralis sur les instructions
de lAgence de Standardisation OTAN. Les pays ayant
ratifi ddicent dobserver les normes de standardisation
des mthodes de codage couleur des munitions aux fins
didentification dcrites dans cette publication. Cette ,
ainsi que le STANAG 2953 qui laccompagne ont t
modifis dans la rvision C afin de renfermer le domaine
entier compris antrieurement dans les STANAGS 2315,
2316, 2320, 2321, 2322 and 2374.
2.
This AOP is published in the two official languages
of NATO, English and French. The terms used are defined
in AAP-6, NATO Glossary of Terms and Definitions
(English and French).
2.
Le prsent AOP est publi dans les deux
langues officielles de lOTAN, langlais et le franais.
Les termes qui y figurent sont dfinis dans lAAP-6,
Glossaire OTAN de termes et dfinitions (anglais et
franais).
3.
When for technical or other reasons (e.g., solar
reflection, camouflage, etc.) the overall colour cannot be
in the prescribed role colour, the role and the hazard
potential of the ammunition will be shown by a band,
letters, figures or discs in the appropriate colour specified
in the code, see table I - 1 - 1.
3.
Lorsque pour des raisons techniques
quelconques (par exemple, la rflexion solaire, le
camouflage, etc) on ne peut se servir dune
couleur gnrale prescrite pour le rle, on indiquera la
fonction et le danger ventuel de la munition au moyen
dune bande, de lettres, de chiffres ou de disques que la
couleur pertinente spcifie dans le code, voir larticle
tableau I - 1 - 1.
4.
The approved abbreviations for the names of
nations used in this AOP are shown in table hereafter.
4.
Les abrviations autorises des noms de pays
quon retrouve dans cet AOP sont expliques au tableau
suivant ce prface.
5.
All suggestions and inquiries concerning this AOP
should be directed to :
5.
Toutes les suggestions et demandes de
renseignements concernant le prsent AOP devront tre
adresses au :
ORIGINAL XXXVII
NATO UNCLASSIFIED
Preface - Table - Key to Abbreviations of the Names of Nations and Services
Prface - Tableau - Liste des abrviations des noms de pays et services
BEL
- BELGIUM
BEL
- BELGIQUE
CAN
- CANADA
CAN
- CANADA
DNK
- DENMARK
DNK - DANEMARK
FRA
- FRANCE
FRA
DEU
GRC - GREECE
- FRANCE
GRC - GRECE
ITA
- ITALY
ITA
- ITALIE
LUX
- LUXEMBOURG
LUX
- LUXEMBOURG
NLD
- NETHERLANDS
NLD
- PAYS-BAS
NOR - NORWAY
NOR - NORVEGE
PRT
- PORTUGAL
PRT
- PORTUGAL
ESP
- SPAIN
ESP
- ESPAGNE
TUR
- TURKEY
TUR
- TURQUIE
GBR
- UNITED KINGDOM
GBR - ROYAUME-UNI
USA
- UNITED STATES
USA
- ETATS-UNIS
CZE
- CZECH REPUBLIC
CZE
- REPUBLIQUE TCHEQUE
POL
- POLAND
POL
- POLOGNE
HUN - HUNGARY
HUN - HONGRIE
BGR
- BULGARIA
BGR - BULGARIE
EST
- ESTONIA
EST
- ESTONIE
LVA
- LATVIA
LVA
- LETTONIE
LTU
- LITHUANIA
LTU
- LITHUANIE
ROU - ROUMANIA
ROU - ROUMANIE
SVK
- SLOVAKIA
SVK
- SLOVAQUIE
SVN
- SLOVENIA
SVN
- SLOVENIE
(S)
(S)
(L)
(L)
(A)
(A)
ORIGINAL XXX
NATO UNCLASSIFIED
AOP-2(C)
PART I
MARKING OF AMMUNITION PREFERRED MARKING
ORIGINAL
NATO UNCLASSIFIED
AOP-2(C)
CHAPTER 1
GENERALITIES ON THE USE OF COLOURS, SYMBOLS AND MARKINGS
1. INTRODUCTION
- The aim of Part I is to show marking and colour coding which will serve to identify the use,
effect produced and hazard potential of ammunition used by NATO Forces.
- The term marking includes basic overall colours, role and hazard coding colours, as well
as descriptive markings and symbols which identify the ammunition and identify any special
characteristics.
- Part II shows the non-preferred markings in use by NATO nations. The aim is to move to a
100 % preferred marking.
- Definition :
- Preferred :
the marking method, agreed by NATO nations.
- Non-preferred : markings wich may appeer in nations stocks.
- Future markings will be according to the preferred markings.
ORIGINAL - I - 1 - 1
NATO UNCLASSIFIED
AOP-2(C)
Colour
Interpretation
Yellow
Brown
Identifies low explosive items or components, or indicates the presence of a low explosive.
Grey
Identifies ammunition containing an incapacitating, riot control or toxic chemical agent filler.
Violet
Dark Red
Dark Green
Black
Silver
Light Green
Light Red
Identifies incendiary ammunition or indicates the presence of highly flammable material (liquids,
jellies, solids), designed to produce damage by fire.
White
Light Blue
Bronze
NOTES :
1. The following colours, when applied as stated, have no colour coding significance :
- Colours specifically applied to identify the colour of smoke produced.
- Unpainted or natural colour ammunition.
- Grey, black, green or white, red, orange on underwater ammunition.
- Black or white used for lettering, numbering or special marking.
- Grey or white on guided missiles, dispensers rockets and bombs.
- Olive drab/army green/camouflage paint applied in any way.
2. Camouflage paint (olive drab) shall never be used for the overall body colour of chemical
ammunition.
3. Colour Bronze : additional markings can be stencilled, stamped or engraved, up to national
requirement (INERT, DRILL, EXC, etc.) in colours which are not in conflict with the
standards in this AOP.
4. Completely inert1 ammunition not designed to incorporate, or to be used in combination with,
energetic material. Representative of an operational or practice item, and not designed to be
delivered in or by, a delivery system. For use in activities such as assembly, handling,
instruction, training, gauging or maintenance.
1. AOP-38 defines inert as Not containing any explosive substance or other energetic material (Apr 2002).
ORIGINAL - I - 1 - 2
NATO UNCLASSIFIED
AOP-2(C)
ROLE BAND
STENCILLING
Serial
Colour
USA
FS
N 595/561
GBR
BS381C
FRA
GAM-C
1995
DEU
RAL840HR
Yellow
33538
356
3310
1007
Brown
30117/30140
411
3030
8007
Grey
36231
631
3630
7000
Black
37038
3600
9005
Silver
17178
6690
9006
Light Green
34558/34449
216
3470
6019
Dark Green
34108
225/267
3440
6002
Light Red
31158
537
3820
3018
3003
Dark Red
31136
538
3810
10
White
37875
3665
9001
11
Light Blue
35109
113
3530
5012
12
Olive Drab
34087/34088
298
24x5
34x5
6014
13
Violet
37100
796
3710
4001
14
Bronze
17043
1036
NOTE :
1. The USA Standard 595B is also used by CAN, GRC, ITA and NLD.
2. Table I-1-2 is a comparative table of Colour Standards used by NATO nations to identify
ammunition conforming to the AOP. They are provided to present design, quality assurance
and production authorities with examples of approved standards on colour coding and the
marking of ammunition. Actual colours utilized on ammunition may vary due to different
manufacturing techniques, and colour perception by individuals.
3. A colour coding reference card is provided in ANNEX J.
OTAN SANS CLASSIFICATION
ORIGINAL - I - 1 - 3
NATO UNCLASSIFIED
AOP-2(C)
4. MINIMUM MARKINGS
Model Designation
Serial N
Type of Ammunition
(a)
Calibre or
Mass
(b)
Lot Designation
Remarks
Complete
Round
Single Item
Complete
Round
Single Item
(d)
(e)
(f)
(g)
(h)
(c)
Fixed, Semi-fixed
Rounds, Mortar
Ammunition (Complete
Rounds)
To be shown on
projectile, or cartridge
case or both ,
according to National
practice.
Separate Projectiles
(Gun, Howitzer or Mortar)
Refers to item
issued.
1. Refers to items as
issued, blank charges
to include the word
BLANK in National
language.
2. Charge numbers to
be marked on each
bag, if applicable.
Separate Propelling
Charges (Cased), Blank
Charges (Gun, Howitzer
or Mortar)
X or O
Fuzes
X or O
X or O
Uncased Propelling
Charges (Bagged) for
Gun and Howitzer
Aircraft Bombs
Rocket/Missile with
Warhead
Rocket/Missile Warhead
10
Rocket/Missile Motor
11
Other ammunition
X or O
Charge numbers to
be marked on each
bag, if applicable.
Calibre, if applicable.
X
Calibre, if applicable.
Calibre, if applicable.
Legend
O = Permanent Markings
X = Stencilled Markings
- NATO forces agree to apply the minimum markings defined in this AOP on ammunition and
its packaging, manufactured by or for NATO nations.
- This AOP does not define special markings or colour coding for the following ammunition/
explosives types :
* Si-munition (simulation)
* Non-lethal weapons ammunition
* Paintball ammunition
* Ammunition for hunting
ORIGINAL - I - 1 - 4
NATO UNCLASSIFIED
AOP-2(C)
5. ADDITIONAL MARKINGS
Additional markings concerning the nature, type and function of ammunition may be necessary
and are described below :
- Ammunition containing mass scatterable antitank mines shall be marked with a yellow
circumferential band of triangular-shaped ( ) figures separated by spaces of the same size
in addition to the main identification letters marked in YELLOW.
- Aircraft high explosive bombs have one yellow band in addition to yellow markings. A second
yellow band, marked with the words THERMALLY PROTECTED is applied to indicate that
a special coating has been applied for thermal protection in the event of a fire on board ship.
- Ammunition containing anti-material and/or anti-personnel grenades shall be marked with a
yellow circumferential band of diamond-shaped ( ) patches separated by spaces of the
same size in addition to the main identification letters marked in YELLOW.
- Ammunition loaded with flechettes shall be marked with a white circumferential band of
diamond-shaped ( ) patches separated by spaces of the same size. The main identification
letters shall be marked in WHITE. All ammunition containing explosives designed to fracture
the projectile shall have a yellow band applied to the projectile.
ORIGINAL - I - 1 - 5
NATO UNCLASSIFIED
AOP-2(C)
ORIGINAL - I - 1 - 6
NATO UNCLASSIFIED
AOP-2(C)
a.
b.
ONE STAR
MORE THAN
TWO STARS OF
WHITE OR
COLOURED
ONE STAR OF
DIFFERENT
SAME COLOUR
COLOURS
ILLUMINATING
3
OVERALL BODY COLOUR WHITE
THE STAR IS BLACK
UNIMPORTANT
COLOUR AS
WHERE NUMBER
APPROPRIATE
IS UNIMPORTANT
WHERE NUMBER IS
MULTI MAY BE
SUBSTITUTED
MULTI MAY BE
SUBSTITUTED
COLOUR AS
APPROPRIATE
EJECTION
c.
d.
TEMPERATURE LIMITATIONS
USER OR FIRING (OPERATIONAL)
- 28 C
49 C
MAIN DESIGNATION
e.
TRACER SYMBOL
g.
f.
- 40 C
27 C
ORIGINAL - I - 1 - 7
NATO UNCLASSIFIED
AOP-2(C)
ORIGINAL - I - 1 - 8
NATO UNCLASSIFIED
AOP-2(C)
8.4. Cancellation
When selecting the method of applying the design mark, consideration should be given to the
possible necessity of removing or obliterating it, should the ammunition or demolition accessory
cease to fulfil the conditions implied by the presence of the symbol.
ORIGINAL - I - 1 - 9
NATO UNCLASSIFIED
AOP-2(C)
ORIGINAL - I - 1 - 10
NATO UNCLASSIFIED
AOP-2(C)
9.4. Cancellation
When selecting method of applying symbol consideration should be given the possible
neccessity of removing or obliterating it, should the ammunition or demolition accessory
cease to fulfil the conditions implied by the presence of the symbol.
ORIGINAL - I - 1 - 11
NATO UNCLASSIFIED
AOP-2(C)
CHAPTER 2
MARKING OF AMMUNITION OF A CALIBRE BELOW 20 MM
1. GENERAL
This chapter explains and illustrates the marking of ammunition below 20 mm calibre.
It includes :
- Basic and combined symbols denoting the nature of the bullets :
ANNEX B Sheet 1 of 2.
- Minimum marking on the base of the cartridge case :
ANNEX B Sheet 2 of 2.
2. MARKING OF BULLETS
- The tip of each bullet is coloured according to its role, as illustrated in ANNEX B Sheet 3 and
4 of 4.
- The colouring is to extend to a minimum of 6 mm down from the tip, but in no case is it to
appear on the bearing surface of the bullet.
- More than one role is indicated by a combination of the appropriate colours. The configurations
shown for dummy and blank ammunition are not NATO approved and shown for information
only.
- This paragraph does not apply to wax tip ammunition.
ORIGINAL - I - 2 - 1
NATO UNCLASSIFIED
AOP-2(C)
CHAPTER 3
MARKING OF AMMUNITION OF A CALIBRE OF 20 MM AND ABOVE
1. GENERAL
This chapter explains and illustrates the marking of ammunition of a calibre 20 mm and above.
The illustrations are to be found in the ANNEX A.
2. MINIMUM MARKINGS
Minimum markings required on ammunition items are detailed in paragraph I -1- 4.
ORIGINAL - I - 3 - 1
NATO UNCLASSIFIED
AOP-2(C)
CHAPTER 4
MARKING SYSTEM FOR IDENTIFICATION OF PROPELLING CHARGES
1. GENERAL
- This chapter covers the marking of cased and uncased propelling charges for operational,
practice, blank and clearing ammunition including operational cartridges and augmenting
charges for mortar ammunition.
- Items designations and marking are not required to include all details of the method of obturation
e.g., Breech Loading (BL), Quick Firing (FR), Recoilless (RCL), etc., unless this is considered
essential for identification.
2. METHODS OF IDENTIFICATION
Cased or uncased propelling charges may be identified by special feature markings and/or
colours. Although excluded from the colours used for cartridges and charges, they should not
conflict with and, where possible, conform to this AOP. The minimum markings prescribed in
this AOP should be adhered to.
ORIGINAL - I - 4 - 1
NATO UNCLASSIFIED
AOP-2(C)
4. COLOUR OF MARKING
- Basic body colour and other identification colours for cased propelling charges (other than
20 mm and 30 mm ammunition) should be left in the natural or protective finish of the material
from which they are manufactured. Where the case is manufactured from plastics or is
combustible, its colour shall not conflict with the coding colours in Chapter I -1. Fully enclosed
combustible charges that contain an igniter/primer shall be marked to indicate this, and in
addition may have a brown band or brown patches indicating the low explosive content.
- Bagged charges or increments or portions thereof for semi-fixed and separate loading
cartridges should be identified by an overall body colour of brown, or a brown band or brown
patches.
- Cloth enclosed igniters for bagged charges should also be identified by a basic body colour
commensurate with their contents, e.g., brown, or brown patches. The charge number, or
name (e.g., SUPER) should be marked on the charge in black.
5. SPECIAL MARKINGS
- Special colour identification markings may be used, where applicable.
* A colour scheme for the bagged charges may be employed as desired by member nations
to readily distinguish between various charges used in the same weapon. These colours
should not conflict with Part I, Chapter 1.
* Charge bags for separate loading propelling charges of 150 mm calibre and above may
have a band around the body to indicate the igniter end of the charge, or the bag may be
marked IGNITER END or PRIMER END. The colour of the band should not conflict with
Part I, Chapter 1.
* The base of cartridge cases of proximity fuzed fixed ammunition may be marked with a
bar of colour to match the colour of the proximity fuze. This marking should be positioned
as near as possible to the shell and propellant lot details.
- Ink, not paint, is normally used for the application of colours and identification marking on
cartridge cases of fixed rounds of ammunition to denote the type of projectile assembled or
the variety of proximity fuze assembled.
- The following may be marked on fixed, separated, and semi-fixed ammunition and bagged
charges to indicate special functions :
MARKING
MEANING
INSCRIPTION
SIGNIFICATION
SUPER
Super-charge
SUPER
Super-charge
REDUCED
Reduced charge
REDUCED
Charge rduite
CLEARING
Clearing charge
CLEARING
Charge de dgagement
BLANK
Blank charge
BLANK
Charge blanc
ORIGINAL - I - 4 - 2
NATO UNCLASSIFIED
AOP-2(C)
6. MARKINGS - GENERAL
- Markings shall be in black, whether they be on the metal cartridge cases or the fabric of
bagged cased charges, see ANNEX C, Sheet 1 and 2 of 4. Where the design of the cartridge
case is unsuitable for the application of markings on the base, the details shall be marked on
the side of the cartridge case. The types of charges and the information to be printed on
each type are outlined below.
- Fixed and Semi-Fixed Ammunition.
* Mark or model number of the filled cartridge case (normally marked on the base of the
case above the marking) indicating the type of charge.
* Ammunition interchangeability or identification code (if applicable).
* Propellant lot number(s).
* Nominal weight of charge.
* Initials or monogram of manufacturer if not included in lot number.
* Date of filling (month and year), if not included in lot number.
- Separate Loading Cased and/or Bagged Charges (Increments or Portions).
* Calibre and, where applicable, role and mark or model number of ordnance.
* Mark, model or part number of filled charge.
* Ammunition interchangeability or identification code (if applicable).
* Propellant lot number(s) (to include monogram of manufacturer and date of filing).
* Nominal weight of charge.
- Uncased Separate Loading Charges. The propellant in uncased bagged charges is normally
contained in fabric bags on which stencilling and printing are the usual means of identification.
The following are the normal details which are to be marked in black see ANNEX C, Sheet 3
of 4. A special colour may be used where required but this should not conflict with Chapter 1.
* Calibre and, where applicable, role and mark or model number of ordnance.
* Mark or model number of the filled charge and, where applicable, details of igniter.
* Ammunition interchangeability or identification code (if applicable).
* Propellant lot number(s), to include monogram of manufacturer and date filling.
* Nominal weight of charge.
* Number of charge, e.g., CHARGE ONE.
ORIGINAL - I - 4 - 3
NATO UNCLASSIFIED
AOP-2(C)
NOTES :
- Where a complete charge consists of a primary or base charge (CHARGE ONE) plus an
increment (CHARGE TWO), it is a requirement that when the two charges are tied together
before use, only the marking CHARGE TWO shall be visible and in alignment. This result
is obtained by having the marking CHARGE ONE on the end of the primary charge which
will be in contact with the incremental charge.
- A numerical marking system should be used where the increments are all of a different
weight. An alphabetical marking system should be used where some of the increments
are identical. These markings should be placed prominently on the side of the charge.
Where all the increments are identical, zone marking is not necessary. All zone markings
shall be visible when the charge is assembled.
- Other markings which may be required on uncased bagged charges are as follows :
* The word SUPER indicating super-charge.
* The word REAR on 150 mm calibre and above.
* The warning NOT TO BE FIRED SEPARATELY is to be marked on the end and side of
the charge increment or tie strap when they must only be fired in conjunction with the
primary charge.
- The outer cloth disc of all cloth igniters shall have the following details marked in black :
* Type of filling i.e., black powder or clean burning ignition (CBI) powder.
* Type letter or number and/or mass filling.
* Initials or monogram of the manufacturer (and/or lot number as applicable).
* Calibre.
- On blank and clearing cartridges, the word BLANK or CLEARING, as applicable, shall be
prominently marked (stamped or engraved) on the base and on the side of the cartridge
case in black (see ANNEX C, Sheet 2 of 4). In addition, the following shall be marked as
indicated :
* Base of case :
- Designation, mark or model number.
* Side of case :
- Nominal weight of charge.
- Ammunition interchangeability or identification code.
- Propellant lot number.
ORIGINAL - I - 4 - 4
NATO UNCLASSIFIED
AOP-2(C)
ORIGINAL - I - 4 - 5
NATO UNCLASSIFIED
AOP-2(C)
CHAPTER 5
MARKING OF AMMUNITION PACKAGES
1. INTRODUCTION
In addition to the ammunition defined in paragraph I-1-4, this chapter details the minimum
markings which NATO forces have agreed to adopt to identify the contents of all packages for
ammunition. The marking of ammunition packaging for ammunition below 20 mm is detailed in
paragraph 6 of this chapter.
2. DEFINITION OF PACKAGES
Packages will be defined as follows :
- The Inner Package is that which directly contains the ammunition.
- The Outer Package is the normal package used for transit and storage.
- The Intermediate Package is any package between the inner and outer package.
ORIGINAL - I - 5 - 1
NATO UNCLASSIFIED
AOP-2(C)
ORIGINAL - I - 5 - 2
NATO UNCLASSIFIED
AOP-2(C)
ORIGINAL - I - 5 - 3
NATO UNCLASSIFIED
AOP-2(C)
* International Hazard Classification Code Label. This label provides information on the
hazard of the packaged contents. It also provides information on the compatibility of the
ammunition concerned.
* Subsidiary Risk Label. This label provides information about any important subdsidiary
risk which may have been identified with the package contents.
* Proper Shipping Name. As described in UN-Recommendations on Transport of
Dangerous Goods (Orange Book) and international legislation.
NOTE :
As required, markings will be effected in conformity with the Regulations for Transportation
of Dangerous Goods in Use by the United Nations. The location for the marking shall ensure
the marking will be visible during transportation and storage.
- Additional markings will be left to the discretion of the National Authorities, with the stipulation
that they cannot be mistaken for those already defined in this AOP.
ORIGINAL - I - 5 - 4
NATO UNCLASSIFIED
AOP-2(C)
PART II
MARKING OF AMMUNITION
NON-PREFERRED MARKING
ORIGINAL
NATO UNCLASSIFIED
AOP-2(C)
CHAPTER 1
INTRODUCTION
1. Certain nations have substantial stocks of ammunition employing markings, which do not
conform with ANNEX A. However, because these markings were applied prior to NATO
agreements or for national reasons, they are considered acceptable. These exceptions are
detailed in this chapter and shown in ANNEX F. In addition, certain nations may have items in
inventory that are in confict and do not conform whit this AOP. ANNEX G illustrates such
schemes. Over time, these exceptions should be deleted.
2. The non-preferred colour codes and markings of the new NATO members since 1999 (CZE,
HUN and POL) and SVK (since 2004) are shown in ANNEX H. Also here it is anticipated as
their stocks are depleted, the colour coding and marking system of ammunition will conform
with the preferred method in this AOP.
ORIGINAL - II - 1 - 1
NATO UNCLASSIFIED
AOP-2(C)
CHAPTER 2
20 TO 40 MM AMMUNITION - NON-PREFERRED COLOUR MARKINGS
IN USE BY NATO MEMBERS (ANNEX E)
1. It is considered preferable to conform to the method shown in ANNEX A for the colour coding
of 20 to 40 mm ammunition. However, apart from items that do not conform, many variations
in colour coding are employed, some quite limited in use, by a particular nation or element of
a nations armed forces such as Navy, Army or Air.
2. GBR places identification details on the cartridge cases of 20 to 40mm ammunition.
3. ANNEX E shows existing colour coding for 20 to 40mm ammunition not conforming to
ANNEX A.
ORIGINAL - II - 2 - 1
NATO UNCLASSIFIED
AOP-2(C)
CHAPTER 3
MISCELLANEOUS AMMUNITION - NON-PREFERRED COLOUR MARKINGS
IN USE BY NATO MEMBERS (SEE ANNEX G)
1. SMOKE
- BEL, FRA, NLD, NOR and USA have white phosphorus grenades coloured light green body,
with light red markings and a yellow band.
- BEL has smoke grenades colour coded dark green with black markings and others with grey
body colour, yellow markings and a yellow band.
2. INCENDIARY
BEL has incendiary grenades coded with grey body colour and purple markings.
3. PRACTICE
- ITA has practice grenades containing a low explosive charge. The grenades are colour coded
red with a brown band and a blue band applied. The markings are permanent. Also, IT has
high explosive grenades colour coded red with a yellow band applied.
ORIGINAL - II - 3 - 1
NATO UNCLASSIFIED
AOP-2(C)
PARTIE I
MARQUAGE DES MUNITIONS METHODE DE MARQUAGE
RECOMMANDEE
ORIGINAL
NATO UNCLASSIFIED
AOP-2(C)
CHAPITRE 1
GENERALITES CONCERNANT LUTILISATION DE COULEURS, SYMBOLES ET
DE MARQUES
1. INTRODUCTION
- La premire Partie a pour but de prsenter la mthode de marquage/codage couleur qui
servira lidentification de lutilisation, de leffet produit et du danger ventuel des munitions
employes par les Forces de l OTAN.
- Le terme marquage inclut la couleur de fond et les couleurs identifiant les risques en
mme temps que les marques et symboles qui identifient les munitions et toutes les
caractristiques spciales.
- La deuxime Partie prsente les marques non recommandes en utilisation auprs des
Forces de lOTAN. Le but est dvoluer vers la mthode de marquage recommande.
- Dfinition :
- Mthode recommande : La mthode de marquage, convenue par les pays membres.
- Mthode non recommande : des marques qui peuvent apparatre dans les stocks des
pays membres.
- Le futur marquage sera selon la mthode de marquage recommande.
ORIGINAL - I - 1 - 1
NATO UNCLASSIFIED
AOP-2(C)
Colour
Interpretation
Jaune
Brun
Identifie les substances ou parties composantes dflagrantes ou indique la prsence d'un explosif
dflagrant.
Gris
Identifie une munition contenant un agent incapacitant, un produit actif uitilis pour le maintien
d'ordre ou un agent chimique toxique.
Violet
Rouge fonc
Vert fonc
Noir
Argent
Vert Clair
Rouge Clair
Blanc
Bleu clair
Identifie les munitions d'exercice utilises la place des munitions relles quivaentes.
Bronze
NOTA :
1. Les couleurs suivantes, appliques comme prescrit dans ce document nont aucune
signification particulire :
- Les couleurs servant identifier la couleur de la fume produite.
- La couleur naturelle des munitions ou la couleur des munitions non peintes.
- Le gris, le noir, le vert, rouge, orange ou le blanc paraissant sur les munitions sous-marines.
- Le noir ou le blanc utiliss pour linscription de lettres, de numros ou de marques particulires.
- Le gris ou le blanc appliqu sur missiles guids, des distributeurs, des roquettes et des
bombes.
- Le vert olive, le vert army ou la peinture de camouflage appliqus de quelque faon que ce soit.
2. La peinture de camouflage (vert olive) ne sera jamais utilise comme couleur de fond des
munitions chimiques.
3. La couleur bronze : des marques additionnelles (INERTE, DRILL, EXC, etc.) peuvent tre
peintes au pochoir, timbres ou graves, suivant les besoins nationaux. Les couleurs utilises
doivent tre conformes aux prescriptions de cet AOP.
4. Munition compltement inerte1, non conue pour comporter ou tre utilise en combinaison
avec des matires nergtiques. Cela concerne un article non de guerre et dexercice conu
pour tre envoy dans ou par un systme de lancement et dont lutilisation se fait dans le
cadre dactivits comme : lassemblage, la manipulation, linstruction, lentranement, le
calibrage ou la maintenance.
1. LAOP-38 definit inerte comme ne contenant aucune matire explosive ni dautre matriel nergtique (Avr 2002).
ORIGINAL - I - 1 - 2
NATO UNCLASSIFIED
AOP-2(C)
COULEUR DE FOND
BANDE DE FONCTION
Srie
Couleur
US
FS
N. 595/561
GBR
BS381C
FRA
GAM-C
1995
DEU
RAL840HR
Jaune
33538
356
3310
1007
Brun
30117/30140
411
3030
8007
Gris
36231
631
3630
7000
Noir
37038
3600
9005
Argent
17178
6690
9006
Vert clair
34558/34449
216
3470
6019
Vert fonc
34108
225/267
3440
6002
Rouge clair
31158
537
3820
3018
Rouge fonc
31136
538
3810
3003
10
Blanc
37875
3665
9001
11
Bleu clair
35109
113
3530
5012
12
Vert olive
34087/34088
298
24x5
34x5
6014
13
Violet
37100
796
3710
4001
Bronze
17043
14
1036
NOTA :
1. La norme USA 595B est galement en usage au CAN, GRC, ITA et NLD
2. Le tableau I-1-2 est un tableau comparatif des normes de couleur lusage des Forces de
lOTAN pour pouvoir identifier les munitions conformment lAOP. Le tableau a pour but de
fournir aux autorits responsables de la conception, de lassurance de la qualit et de la production,
les normes approuves en ce qui concerne lidentification (code de couleurs, inscriptions et
marques) des munitions et de leurs contenants. Cependant, les couleurs actuelles utilises sur
les munitions peuvent prsenter certaines variantes par rapport aux normes, en raison de
techniques de manufacture et la capacit de perception des couleurs par des individuels.
3. Une carte de rfrence couleur est prsente en ANNEXE J
OTAN SANS CLASSIFICATION
ORIGINAL - I - 1 - 3
NATO UNCLASSIFIED
AOP-2(C)
4. MARQUES MINIMALES
Dsignation du Modle
N Srie
Type de Munition
Calibre ou
Masse
(a)
(b)
(c)
Dsignation du Lot
Observtions
Coup
Complet
Article
Simple
Coup
Complet
Article
Simple
(d)
(e)
(f)
(g)
(h)
Munitions encartouches
et de mortier (coups
complets)
A indiquer sur le
projectile ou la douille
ou sur les deux, selon
la pratique nationale.
Projectiles spars
(canon, obusier ou
mortier)
Charges propulsives
livres dans une douille.
Douille charges blanc
(pour canon, obusier ou
mortier).
X ou O
Fuses
X ou O
X ou O
Etoupille de canon,
d'obusie et de maortier
Charges propulsives
sans douilles
(gargousses) pour canon
et obusier
Bombes d'avions
Ogives de roquette /
missile
10
Propulseur deroquette /
missile
11
autres munitions
X ou O
Le numro de la
charge marqu sur
chaque gargousses,
le cas chant.
Calibre, le cas
chant.
X
Calibre, le cas
chant.
Calibre, le cas
chant.
Lgende
O = Marque permanente
X = Marque au pochoir
- Les Forces de lOTAN se sont mises daccord pour appliquer les marques minimales dfinies
dans cet AOP sur les munitions et leurs emballages fabriqus par ou pour ceux-ci.
- Cet AOP ne dfinit pas les marques minimales ou les codes de couleur pour les types de
munitions/explosifs suivants :
* Si-munition (simulation)
* Munitions non lthales
* Munitions Paintball
* Munitions de chasse
OTAN SANS CLASSIFICATION
ORIGINAL - I - 1 - 4
NATO UNCLASSIFIED
AOP-2(C)
5. MARQUAGES SUPPLEMENTAIRES
Des marquages supplmentaires concernant la nature, le type et la fonction de la munition
peuvent tre ncessaires et sont dcrits ci-dessous :
- Les munitions contenants des mines dispersables en masse doivent tre marques dune
bande circulaire jaune de figures triangulaires ( ) spares par des espaces de mme taille
en plus des lettres didentification principales marques en JAUNE.
- Les bombes davion brisantes portent une bande jaune en plus des marquages de mme
couleur. Une seconde bande jaune sur laquelle apparaissent les mots THERMALLY
PROTECTED sera applique pour indiquer quun revtement spcial de protection thermique
a t appliqu en cas de feu bord dun navire.
- Les munitions contenant des grenades antimatriel et/ou antipersonnel doivent tre marques
dune bande circulaire jaune de figures en forme de losenge ( ) spares par des espaces
de mme taille en plus des lettres didentification principales marques en JAUNE.
- Les munitions contenant des flchettes doivent tre marques dune bande circulaire blanche
de figures en forme de losenge ( ) spars par des espaces de mme taille. Les lettres
didentification principales doivent tre marques en BLANC. Toutes les munitions contenant
des explosifs destins fracturer le projectile doivent tre marques dune bande jaune.
ORIGINAL - I - 1 - 5
NATO UNCLASSIFIED
AOP-2(C)
ORIGINAL - I - 1 - 6
NATO UNCLASSIFIED
AOP-2(C)
a.
b.
UNE ETOILE
OU
EN COULEUR
DE LA
ECLAIRANTE
DEUX ETOILES
DE COULEUR
DIFFERENTE
MEME COULEUR
3
SI LA COULEUR DE FOND EST
COULEUR
APPROPRIEE
ET SE LA COULEUR DE FOND NA
PAS DE SIGNIFICATION, LETOILE
DOIT ETRE BLANCHE
SI LE NOMBRE
DETOILES NA PAS
DIMPORTANCE
LINSCRIPTION
MULTI PEUT
FIGURER A COTE DE
LETOILE QUI DOIT
ETRE DE LA
COULEUR
APPROPRIEE
c.
d.
LIMITE DE TEMPERATURE
STOCKAGE & TRANSPORT
- 28 C
49 C
e.
g.
SYMBOLE DUNE
CHARGE TRACANTE
SI LE NOMBRE
DETOILES NEST
PAS IMPORTANT LE
CHIFFRE PEUT
REMPLACE PAR
LINSCRIPTION
MULTI
- 40 C
27 C
SYMBOLE DE CATEGORIE
DE MASSE
ORIGINAL - I - 1 - 7
NATO UNCLASSIFIED
AOP-2(C)
Dimensions
Les lettres seront de dimensions favorisant la lisibilit, compte tenu des limites imposes
par les dimensions et la configuration de la munition ou de son emballage.
ORIGINAL - I - 1 - 8
NATO UNCLASSIFIED
AOP-2(C)
ORIGINAL - I - 1 - 9
NATO UNCLASSIFIED
AOP-2(C)
ORIGINAL - I - 1 - 10
NATO UNCLASSIFIED
AOP-2(C)
PLAN DE CONSTRUCTION
SYMBOLE UTILISE SUR UN EMBALLAGE DONT TOUS LES ACCESSOIRES SONT INTERCHANGEABLES
9.4. Annulation
Lorsquune mthode dapplication du symbole est choisie, il faut garder lesprit quil peut
savrer ncessaire de leffacer, quand la munition ou laccessoire de dmolition cesse de
remplir les conditions quimplique la prsence du symbole.
ORIGINAL - I - 1 - 11
NATO UNCLASSIFIED
AOP-2(C)
CHAPITRE 2
MARQUAGE DES MUNITIONS DUN CALIBRE INFERIEUR A 20 MM
1. GENERALITES
Ce chapitre explique le marquage des munitions dun calibre infrieur 20 mm.
Inclus :
- les symboles de base et combins en corrlation avec la nature de la balle.
ANNEXE B page 1 de 2.
- le marquage minimum sur la base de la douille de la cartouche.
ANNEXE b page 2 de 2.
ORIGINAL - I - 2 - 1
NATO UNCLASSIFIED
AOP-2(C)
CHAPITRE 3
MARQUAGES DES MUNITIONS DE CALIBRE DE 20MM ET SUPERIEUR
1. GENERALITES
Ce chapitre explique et illustre le marquage des munitions dun calibre gal ou suprieur 20
mm. Ces illustrations se trouvent en ANNEXE A.
2. MARQUES MINIMALES
Les marques minimales requis sur les munitions sont dtaills au paragraphe I -1- 4.
ORIGINAL - I - 3 - 1
NATO UNCLASSIFIED
AOP-2(C)
CHAPITRE 4
SYSTEME DE MARQUAGE POUR LIDENTIFICATION DES CHARGES
PROPULSIVES
1. GENERAL
- Le prsent chapitre rgit le marquage des charges propulsives encartouches ou non, des
munitions de guerre, des munitions dexercice, des munitions blanc et des charges de
dgagement, y compris les cartouches et les charges propulsives pour les munitions de
mortier.
- Il nest pas ncessaire que les inscriptions et les marques didentification reprennent tous
les dtails de la mthode dobturation, par exemple : chargement par la culasse (Breach
Loading BL), tir rapide (Quick Firing QF), sans recul (Recoilless RCL) etc., moins que
cela ne soit considr comme indispensable pour didentification.
2. METHODES DIDENTIFICATION
Les charges propulsives, encartouches ou non, peuvent tre identifies au moyen dinscriptions
ou de couleurs spciales. Celles-ci ne peuvent tre celles utilises pour identifier les cartouches
et les charges principales, elles doivent tre, autant que possible, conformes cet AOP. Il faut
utiliser les inscriptions minimales prescrites dans cet AOP.
ORIGINAL - I - 4 - 1
NATO UNCLASSIFIED
AOP-2(C)
5. MARQUES SPECIALES
- Des marques didentification spciales peuvent tre utilises selon le cas :
* Pour permettre de distinguer facilement les diverses charges utilises dans une mme
arme, les pays membres peuvent se servir de bandes de couleurs quils dsirent pour les
sacs de poudre. Leur couleur doit tre compatible avec les exigences de la Partie I, Chapitre1.
* Les gargousses des munitions chargement spar de 150 mm ou plus, peuvent tre
entoures dune bande afin dindiquer de quel ct se trouve la charge dallumage ou bien
linscription IGNITER END (ALLUMEUR) peut tre appose sur le sac. La couleur de ces
bandes doit tre compatible avec celles prescrites dans la Partie I, Chapitre 1.
* Le culot des douilles des munitions encartouches, dont le projectile est muni dune fuse
de proximit, peut comporter une barre dune couleur qui correspond celle de la fuse de
proximit. Cette barre doit se trouver le plus prs possible des indications de lot du projectile
(obus) et de la charge propulsive (poudre).
- Lencre est habituellement utilise au lieu de la peinture pour excuter les inscriptions sur les
douilles ou les gargousses, sauf pour certaines inscriptions spciales apposes sur les
douilles des munitions encartouches pour dsigner le type de projectile ou de fuse de
proximit.
- Les inscriptions suivantes peuvent tre apposes sur les munitions encartouches, les
munitions spares, les munitions semi-encartouches et les gargousses des munitions
chargement spar pour indiquer quil sagit de charges spciales :
MARKING
MEANING
INSCRIPTION
SIGNIFICATION
SUPER
Super-charge
SUPER
Super-charge
REDUCED
Reduced charge
REDUCED
Charge rduite
CLEARING
Clearing charge
CLEARING
Charge de dgagement
BLANK
Blank charge
BLANK
Charge blanc
ORIGINAL - I - 4 - 2
NATO UNCLASSIFIED
AOP-2(C)
6. MARQUES GENERALITES
- Les marques doivent apparatre en noir sur les douilles en mtal ou sur le tissu des gargousses
(voir ANNEXE C, pages 1 et 2 de 4). Si, par leur conception, les douilles ne peuvent recevoir
ce marquage sur le culot, celui-ci doit tre repris sur le ct de la douille. Les indications du
type de charge sont numres aux paragraphes ci-dessous :
- Munitions encartouches et semi-encartouches
* La marque ou le numro de modle de la cartouche charge (habituellement marque sur
le culot de la douille au-dessus de la marque) indiquant le type de charge.
* Le code dinterchangeabilit ou didentification, sil y a lieu.
* Le(s) numro (s) de lot de la poudre propulsive.
* La masse nominale de la charge.
* Les initiales ou le monogramme du fabricant, ayant procd au chargement dans le cas
o elles ne seraient pas dj incluses dans le numro de lot.
* La date de chargement (mois et anne), si pas dj incluse dans le numro de lot.
- Sachets de poudre encartouchs ou gargousses non encartouches pour munitions
chargement spar (relais ou parties de charges)
* Le calibre et, sil y a lieu, la fonction et le type ou le numro de modle de larme.
* Le type, le numro de modle ou de llment de la munition charge.
* Le code dinterchangeabilit ou didentification, sil y a lieu.
* Le(s) numro(s) de lot de la poudre propulsive (doit comprendre le monogramme du
fabricant et la date du chargement).
* La masse nominale de la charge.
- Gargousses non encartouches pour munitions chargement spar
* Le calibre et, sil y a lieu, la fonction et le type ou le numro de modle de larme.
* La marque ou le numro de modle de la munition charge et sil y a lieu, les dtails
techniques sur lallumeur.
* Le code dinterchangeabilit ou didentification, sil y a lieu.
* Le(s) numro(s) de lot de la poudre propulsive incluant le monogramme du fabricant et la
date du chargement.
* La masse nominale de la charge.
* Le numro de la charge, par exemple, CHARGE ONE (CHARGE UN).
ORIGINAL - I - 4 - 3
NATO UNCLASSIFIED
AOP-2(C)
NOTES :
- Dans le cas dune charge complte qui consiste en une charge primaire (CHARGE ONE/
CHARGE UN) et un relais (CHARGE TWO/CHARGE DEUX) et lorsque ces deux charges
sont attaches ensemble avant leur utilisation, seule linscription CHARGE TWO (CHARGE
DEUX)doit tre visible et aligne. Pour que ces charges soient allignes, il faut que
linscription ONE (UN) figure sur lextrmit de la charge primaire qui sera en contact avec
le relais.
- Une mthode de marquage numrique doit tre utilise lorsque les relais sont tous dune
masse diffrente. Une mthode de marquage alphabtique doit tre utilise o quelquesuns sont identiques. Ces marques doivent tre bien en vue sur le ct de la charge. Le
marquage de zone nest pas ncessaire si tous les relais sont identiques. Toutes les
marques de zone doivent tre visibles lorsque la charge est monte.
- Il peut tre ncessaire dapposer les inscriptions suivantes sur les sacs de poudre non
encartouchs (gargousses) :
* Le mot SUPER pour indiquer une supercharge.
* Le mot REAR (ARRIRE) sur les munitions de calibre de 150 mm et plus.
* Lavertissement NOT TO BE FIRED SEPARATELY (NE PAS METTRE A FEU
SEPAREMENT) doit tre inscrit sur lextrmit et le ct du relais ou sur lattache lorsque
celui-ci ne peut tre mis feu en mme temps que la charge primaire.
- Les renseignements suivants doivent tre inscrits en noir sur le disque de tissu extrieur
de tous les allumeurs contenus dans les sacs en tissu :
* Le type de poudre : par exemple, poudre noire ou poudre sans fume (PSF).
* La lettre ou le numro du type dallumeur ou la masse de la substance explosive.
* Les initiales ou le monogramme de la socit qui a effectu le chargement et/ou le
numro de lot, sil y a lieu.
* Le calibre
- Sur les cartouches blanc et les charges de dgagement, le terme BLANK ou CLEARING
(DEGAGEMENT), selon le cas, doit tre inscrit (estamp ou grav) en noir et tre bien en
vue sur le culot et les cts de la douille (voir ANNEXE C, page 2 de 4). Il faut aussi
apposer les renseignements suivants :
* Le culot :
- La marque ou le numro de modle.
* Le ct de la douille :
- La masse nominale de la charge.
- Le code dinterchangeabilit ou didentification de la munition.
- Le numro de lot de la poudre propulsive.
ORIGINAL - I - 4 - 4
NATO UNCLASSIFIED
AOP-2(C)
- Les renseignements suivants doivent tre inscrits sur les cartouches propulsives de mortier
(voir ANNEXE C, page 4 de 4) :
* Le calibre et type de mortier sur le ct de la douille.
* La masse nominale de la charge sur le ct de la douille.
* Le code dinterchangeabilit ou didentification de la munition sur le ct de la douille.
* La marque de la cartouche sur le disque de fermeture.
* Le numro de lot de la cartouche charge sur le disque de fermeture.
* Larme sur le disque de fermeture.
- tant donn la petite taille de certaines cartouches propulsives de mortier, il se peut quil
ne soit pas toujours possible dapposer les inscriptions ainsi que prescrit. Il faut toutefois
que les donnes ncessaires y figurent de faon lisible et o les charges de zone sont
incluses, les prvisions du paragraphe 6 Note 2, seront applicables aux marques de zone
visibles lorsque les charges sont montes.
ORIGINAL - I - 4 - 5
NATO UNCLASSIFIED
AOP-2(C)
CHAPITRE 5
SYSTEME DE MARQUAGE POUR LES EMBALLAGES DE MUNITIONS
1. INTRODUCTION
Ce chapitre dfinit les marques minimales que les Forces de lOTAN ont convenu dadopter
pour lidentification du contenu de tous les emballages de munitions et galement des types de
munitions mentionns au paragraphe I-1-4. Le marquage des emballages pour les munitions
de calibre infrieur 20 mm est dtaill au paragraphe 6 de ce chapitre.
ORIGINAL - I - 5 - 1
NATO UNCLASSIFIED
AOP-2(C)
ORIGINAL - I - 5 - 2
NATO UNCLASSIFIED
AOP-2(C)
- Dsignation pour lexpdition. Tel que dcrit dans les recommandations relatives au
transport des marchandises dangereuses des N.U. (Livre Orange) et dans les lgislations
internationales.
- tiquetage du risque subsidiaire. Cette tiquette fournit linformation du risque subsidiaire
important qui peut avoir t identifi avec le contenu de lemballage.
- Direction de la tte. Pour la lutte contre lincendie et le stockage, les roquettes et les missiles
seront marques avec les mots NOSE END, PROJ END or HEAD END sur lemballage
extrieur ou avec lindication dune flche, indiquant la direction de la tte.
NOTE:
Les marquages seront effectus conformment aux recommandations sur le transport des
marchandises dangereuses utilises par les Nations Unies. Leurs emplacements seront choisis
pour quils soient clairement visibles tant en cours de transport quau stockage.
ORIGINAL - I - 5 - 3
NATO UNCLASSIFIED
AOP-2(C)
ORIGINAL - I - 5 - 4
NATO-UNCLASSIFIED
ORIGINAL
PARTIE II
MARQUAGE DES MUNITIONS
METHODE DE MARQUAGE
NON-RECOMMANDEE
ORIGINAL
NATO UNCLASSIFIED
AOP-2(C)
CHAPITRE 1
INTRODUCTION
1. Certaines nations possdent des stocks importants de munitions avec des marquages qui
ne sont pas conformes lANNEXE A. Cependant, parce que ces marquages ont t appliqus
avant les accords OTAN ou pour des raisons nationales, ils sont considrs comme
acceptables. Ces exceptions sont dtailles dans ce chapitre et illustres dans lANNEXE F.
De plus, certaines nations peuvent dtenir une liste des articles qui ne sont pas conformes
cet AOP. LANNEXE G reprend de tels marquages. Progressivement, ces exceptions
disparatront.
2. Les codes de couleur et les marques non-recommandes des nouveaux membres de lOTAN
depuis 1999 (CZE, HUN et POL) et depuis 2004 (SVK) sont illustrs dans lANNEXE H. Ici
aussi, il est prvu quune fois ces stocks puiss, le systme de marquage de munitions se
conformera la mthode recommande dans cet AOP.
ORIGINAL - II - 1 - 1
NATO UNCLASSIFIED
AOP-2(C)
CHAPITRE 2
MUNITIONS DE 20 A 40 MM MARQUES DE COULEUR NONRECOMMANDEES, UTILISEES PAR LES MEMBRES DE LOTAN (ANNEXE E)
2. La GBR ajoute des dtails didentification sur les douilles des munitions de 20 40 mm.
3. LANNEXE E montre les codes de couleur utiliss pour les munitions de 20 40 mm, non
conformes lANNEXE A.
ORIGINAL - II - 2 - 1
NATO UNCLASSIFIED
AOP-2(C)
CHAPITRE 3
MUNITIONS DIVERSES MARQUES DE COULEUR NON-APPROUVEES,
UTILISEES PAR LES MEMBRES DE LOTAN (VOIR ANNEXE G)
1. FUMIGENES
- BEL, FRA, NLD, NOR et USA utilisent des grenades au phosphore blanc dont la couleur de
fond est le vert clair, avec des marques rouge clair et une bande jaune.
- La BEL utilise des grenades au code couleur vert fonc avec marques noires, et dautres
grenades avec du gris comme couleur de fond, des marques jaunes et une bande jaune.
2. MUNITIONS INCENDIAIRES
La BEL possde des grenades incendiaires dont le corps, de code couleur gris, porte des
marques violettes.
3. MUNITIONS DEXERCICE
- LITA utilise des grenades dexercice comportant une charge explosif dflagrant. Ces
grenades sont marques du code de couleur rouge, avec une bande brune et une bande
bleue superposes. Les marques sont permanentes. De mme, l ITA utilise des grenades
explosif brisant marques du code de couleur rouge avec une bande jaune superpose.
ORIGINAL - II - 3 - 1
NATO UNCLASSIFIED
HIGH EXPLOSIVE
EXPLOSIF BRISANT
CATEGORY
CATEGORIE
APPLIED BY
APPLIQUE PAR
CHARACTERISTICS
CARACTERISTIQUES
BURSTING
WHITE PHOSPHORUS
A ECLATEMENT
PHOSPHORE BLANC
SMOKE
FUMIGENE
ORIGINAL
NATO UNCLASSIFIED
CODE
APPLIED BY
APPLIQUE PAR
BEL CAN DNK
FRA DEU ITA
NLD NOR TUR
GBR USA
CHARACTERISTICS
CARACTERISTIQUES
SHOT - ARMOUR PIERCING DISCARDING
SABOT/ARMOUR PIERCING FIN STABILIZED
DISCARDING SABOT
ARMOUR DEFAETING
ANTIBLINDAGE
COUNTERMEASURE
CONTRE-MESURE
INCENDIARY
INCENDIAIRE
ORIGINAL
NATO UNCLASSIFIED
CODE
APPLIED BY
APPLIQUE PAR
BEL CAN DNK
DEU NLD
(packed//emball)
CHARACTERISTICS
CARACTERISTIQUES
FLARE, PARACHUTE FLARE, ETC.
MUNITION ECLAIRANTE AVEC OU SANS
PARACHUTE, ETC.
ILLUMINATING
ECLAIRANT
*
CHEMICAL
CHIMIQUE
USA
*
GBR USA
INCAPACITATING AGENT
AGENT CHIMIQUE INCAPACITANT
*
NOTE :
*
*
OTAN SANS CLASSIFICATION
NOTA :
ORIGINAL
NATO UNCLASSIFIED
CODE
APPLIED BY
APPLIQUE PAR
USA
CHARACTERISTICS
CARACTERISTIQUES
INCAPACITATING AGENT WITH HIGH
EXPLOSIVE BURSTER
AGENT CHIMIQUE INCAPACITANT AVEC
CHARGE DECLATEMENT
*
GBR USA
*
CHEMICAL
CHIMIQUE
USA
*
GBR USA
*
USA
*
NOTE :
*
*
NOTA :
ORIGINAL
NATO UNCLASSIFIED
CODE
APPLIED BY
APPLIQUE PAR
CHARACTERISTICS
CARACTERISTIQUES
PRACTICE
EXERCICE
CANISTER
BOITE A MITRAILLE
SANS POUDRE
PROPELLANT
CHARGE ROPUSLSIVE
PROPELLANT
CHARGE PROPULSIVE
ORIGINAL
NATO UNCLASSIFIED
I BASIC SYMBOLS
I SYMBOLES DE BASE
1. BALL
1. BALLE ORDINAIRE
5. OBSERVING
5. BALLE DE REGLAGE
2. TRACER
2. TRACEUSE
3. ARMOUR PIERCING
3. BALLE PERFORANTE
4. INCENDIARY
4. INCENDIAIRE
7. BLANK
7. A BLANC
II COMBINED SYMBOLS
II SYMBOLES COMBINES
ORIGINAL
NATO UNCLASSIFIED
The following minimum markings shall be stamped on the base of the cartridge case.
Les marques indlbiles minimum ci-dessous seront apposes sur le culot de ltui.
Note :
The above drawing is an example and is not meant to show a specific position for the
minimum markings.
Nota :
ORIGINAL
NATO UNCLASSIFIED
ARMOUR PIERCING
INCENDIARY
BALLE PERFORANTE
INCENDIAIRE
ARMOUR PIERCING
BALLE PERFORANTE
TRACER
BALLE TRACEUSE
BALL
BALLE ORDINAIRE
CATEGORY
CATEGORIE
CHARACTERISTICS
CARACTERISTIQUES
CODE
(NO MARKING)
(SANS MARQUAGE)
RED
ROUGE
BLACK
NOIR
SILVER
ARGENT
INCENDIARY
INCENDIAIRE
BLUE
BLEU
ORIGINAL
NATO UNCLASSIFIED
CHARACTERISTICS
CARACTERISTIQUES
CODE
BLANK
CARTOUCHE A BLANC
RIFLE GRENADE
CARTOUCHE POUR TIR
DE GRENADE
OBSERVING
BALLE DE REGLAGE
YELLOW
JAUNE
BLANK
CARTOUCHE A BLANC
HOLED
DUMMY
CARTOUCHE INERTE
ETUI TROUE
FLUTED
ETUI RAINURE
NOTE : More than one of the above roles will be indicated by a combination of the colours.
Lorsqune balle rempli plusieurs fonctions, celle-ci doivent tre indiques par un ensemble de couleurs
appropries.
ORIGINAL
NATO UNCLASSIFIED
ORIGINAL
NATO UNCLASSIFIED
ORIGINAL
NATO UNCLASSIFIED
ORIGINAL
NATO UNCLASSIFIED
ORIGINAL
NATO UNCLASSIFIED
1.
2.
3.
4.
5.
6.
7.
8.
9.
Note
1.
2.
3.
4.
5.
6.
7.
8.
9.
Nota
: Le dessin ci-dessus nest quun exemple servant indiquer lordre gnral dans lequel doit
figurer le marquage minimum OTAN.
ORIGINAL
NATO UNCLASSIFIED
1. LINKED
1. MAILLONS
2. BELTED
2. BANDE SOUPLE
4. BANDOLIER
4. BANDOULIERE
3. CLIP OR CHARGER
3. LAME-CHARGEUR
OU
OU
5. BANDOLIER CONTAINING CLIPS
5. BANDOULIERE DE LAMES-CHANGEURS
7. BULK/CARTON
-NO SYMBOL
7. EN VRAC OU EN BOITE
-AUCUN SYMBOLE
* : A FIGURE PLACED NEAR THE SYMBOL INDICATES THE NUMBER OF ROUNDS IN THE CLIP OR CHARGER.
* : UN CHIFFRE APPOS PROXIMIT IMMDIATE DU SYMBOLE REPRSENTE LE NOMBRE DE
CARTOUCHES DE LA LAME-CHARGEUR OU DU CHARGEUR
ORIGINAL
NATO UNCLASSIFIED
CODE
APPLIED BY
APPLIQUE PAR
CHARACTERISTICS
CARACTERISTIQUES
ARMOUR PIERCING
BOULET PERFORANT
NLD (S) 30 mm
GBR
BEL
DEU
ORIGINAL
NATO UNCLASSIFIED
CODE
APPLIED BY
APPLIQUE PAR
CHARACTERISTICS
CARACTERISTIQUES
BE L FRA
> 30 MM
FRA DEU
20 AND 30 MM
20 ET 30 MM
USA
ALTERNATE
DE RECHANGE
ARMOUR PIERCING,
HIGH EXPLOSIVE
BOULET PERFORANT
EXPLOSIF
GBR
NLD
ORIGINAL
NATO UNCLASSIFIED
CODE
APPLIED BY
APPLIQUE PAR
CHARACTERISTICS
CARACTERISTIQUES
HIGH EXPLOSIVE
EXPLOSIF
GBR
GBR
ORIGINAL
NATO UNCLASSIFIED
CODE
APPLIED BY
APPLIQUE PAR
CHARACTERISTICS
CARACTERISTIQUES
GBR
FRA USA
NLD (A)
NLD (S)
ORIGINAL
NATO UNCLASSIFIED
CODE
APPLIED BY
APPLIQUE PAR
USA
CHARACTERISTICS
CARACTERISTIQUES
WITH TRACER
AVEC TRACEUR
BEL DNK
FRA
ITA
ORIGINAL
NATO UNCLASSIFIED
CODE
APPLIED BY
APPLIQUE PAR
CHARACTERISTICS
CARACTERISTIQUES
USA (S)
USA (A,L)
PRACTICE
EXERCICE
GBR
ORIGINAL
NATO UNCLASSIFIED
APPLIED BY
APPLIQUE PAR
CODE
CHARACTERISTICS
CARACTERISTIQUES
HIGH EXPLOSIVE
EXPLOSIF BRISANT
GRC
NLD (S)
ARMOUR DEFEATING
ANTIBLINDAGE
WHITE PHOSPHORUS
SMOKE
FUMIGNE
PHOSPHORE BLANC
DNK
DUMMY
INERTE
* TIL UNDERVISNINGSBRUG
BLACK TEXT ON WHITE
TEXTE NOIR SUR FOND BLANC
ORIGINAL
NATO UNCLASSIFIED
ILLUMINANT
ECLAIRANT
CATEGORY
CATEGORIE
CODE
APPLIED BY
APPLIQUE PAR
CHARACTERISTICS
CARACTERISTIQUES
NLD (S)
NLD (L - packed//
emball)
NLD
(L - unpacked//
dball)
BEL (unpacked//
dball) FRA
NOR
GBR
INCENDIARY
INCENDIAIRE
NLD
ORIGINAL
NATO UNCLASSIFIED
CODE
APPLIED BY
APPLIQUE PAR
FRA DEU
CHARACTERISTICS
CARACTERISTIQUES
LEAFLET, RADAR ECHO, ETC.
COUNTERMEASURE
CONTRE-MESURE
GBR
HIGH EXPLOSIVE
EXPLOSIF BRISANT
PRACTICE
EXERCICE
SPOTTING CHARGE
LOW EXPLOSIVE
EXPLOSIF DEFLAGRANT
MOTORS
PROPULSEUR DE
ROQUETTES ET DE MISSILE
SPOTTING CHARGE
ORIGINAL
NATO UNCLASSIFIED
CODE
APPLIED BY
APPLIQUE PAR
BEL
CHARACTERISTICS
CARACTERISTIQUES
WHITE PHOSPHORUS OR NON-WHITE
PHOSPHORUS AND COLOURED SMOKE
SMOKE
FUMIGENE
BEL
ILLUMINATING
ECLAIRANT
USA
CHEMICAL
CHIMIQUE
ORIGINAL
NATO UNCLASSIFIED
1. AIM - BUT
-
The aim of this ANNEX is to review the colour coding and marking system of ammunition used by CZE, HUN
and POL Land Forces. Marking method is based on standards of Warsaw Pact. Ammunition made before
1999 (when CZE, HUN and POL became NATO members) has been marked as shown in this ANNEX.
Repainting and remarking this ammunition according to AOP-2 is not possible for financial and technical
reasons (dewaxing, failure of hermetical sealing, etc.)
Le but de cette ANNEXE est de faire un aperu des codes de couleur et des marquages lusage auprs des
forces terrestres de CZE, HUN and POL. Les mthodes sont bases sur les standards de lancien Pacte de
Varsovie. Les Munitions fabriques avant 1999 sont marques comme montr dans cette ANNEXE. Repeindre
et marquage selon lAOP-2 est impossible pour des raisons financires et techniques (dewaxing, dfaillance de
fermeture hemtique, etc.).
The markings system used by SVK (NATO member since 2004) is identical to the CZE.
Le systme de marquage de la SVK (membre de lOTAN ds 2004) est identique celui de CZE.
2. CONTENT - CONTENU
This ANNEX contains information about :
-
Marks
Marks
Marks
Marks
2
4
6
10
13
14
15
15
4
6
10
13
14
15
15
ORIGINAL
NATO UNCLASSIFIED
HIGH EXPLOSIVE
EXPLOSIF BRISANT
CATEGORY
CATEGORIE
CODE
APPLIED BY
APPLIQUE PAR
CZE HUN POL
SVK
SMOKE
FUMIGENE
ARMOUR DEFEATING
ANTIBLINDAGE
INCENDIARY
INCENDIAIRE
CZE SVK
ILLUMINATING
ECLAIRANT
CHARACTERISTICS
CARACTERISTIQUES
ORIGINAL
NATO UNCLASSIFIED
CODE
APPLIED BY
APPLIQUE PAR
CHARACTERISTICS
CARACTERISTIQUES
POL
POL
PRACTICE
EXERCICE
POL
CONTAINS EXPLOSIVES
CONTIENS DES EXPLOSIFS
POL
DUMMY
INERTE
SZKOLNY
ORIGINAL
NATO UNCLASSIFIED
20 - 40 MM PROJECTILES
PROJECTILES 20 - 40 MM
APPLIED BY
APPLIQUE PAR
CZE SVK
CHARACTERISTICS
CARACTERISTIQUES
HUN : RED TOP AND GREEN RING
HUN : POINTE ROUGE ET BANDE VERTE
CZE SVK
HIGH EXPLOSIVE
INCENDIARY TRACER
EXPLOSIF BRISANT
INCENDIAIRE TRACEUSE
CODE
POL
ARMOUR PIERCING
TRACER
BOULET PERFORANT
TRACEUSE
HIGH EXPLOSIVE
TRACER
EXPLOSIF BRISANT
TRACEUSE
HIGH EXPLOSIVE
INCENDIARY
EXPLOSIF BRISANT
INCENDIAIRE
CATEGORY
CATEGORIE
HUN
POL
DUMMY
INERTE
ORIGINAL
NATO UNCLASSIFIED
20 - 40 MM PROJECTILES
PROJECTILES 20 - 40 MM
CATEGORY
CATEGORIE
CODE
APPLIED BY
APPLIQUE PAR
POL
CHARACTERISTICS
CARACTERISTIQUES
DOES NOT CONTAIN EXPLOSIVES
PRACTICE
EXERCICE
CZE SVK
WITH TRACER
AVEC TRACEUSE
POL
ORIGINAL
NATO UNCLASSIFIED
PROJECTILES BELOW 20 MM
CALIBRE INFERIEUR A 20 MM
CATEGORY
CATEGORIE
CODE
APPLIED BY
APPLIQUE PAR
CHARACTERISTICS
CARACTERISTIQUES
BALL
BALLE ORDINAIRE
HUN
TRACER
BALLE TRACEUSE
ORIGINAL
NATO UNCLASSIFIED
PROJECTILES BELOW 20 MM
CALIBRE INFERIEUR A 20 MM
INCENDIARY
BALLE INCENDIAIRE
ARMOUR PIERCING
INCENDIARY TRACER
BALLE PERFORANTE
INCENDIAIRE TRACEUSE
ARMOUR PIERCING
INCENDIARY
BALLE PERFORANTE
INCENDIAIRE
ARMOUR PIERCING
BALLE PERFORANTE
CATEGORY
CATEGORIE
CODE
APPLIED BY
APPLIQUE PAR
CHARACTERISTICS
CARACTERISTIQUES
CZE SVK
CZ E HUN POL
SVK
HUN
REDUCED
DE TIR REDUIT
HUN POL
ORIGINAL
NATO UNCLASSIFIED
PROJECTILES BELOW 20 MM
CALIBRE INFERIEUR A 20 MM
CATEGORY
CATEGORIE
CODE
APPLIED BY
APPLIQUE PAR
CHARACTERISTICS
CARACTERISTIQUES
DUMMY
INERTE
OBSERVING
DE REGLAGE
REDUCED - TRACER
DE TIR REDUIT TRACEUSE
REDUCED
DE TIR REDUIT
CZE SVK
CZE SVK
HOLED
ETUI TROUE
FLUTED
RAINURE
ORIGINAL
NATO UNCLASSIFIED
PROJECTILES BELOW 20 MM
CALIBRE INFERIEUR A 20 MM
INCENDIARY POINT
DETONATING
BLANK
CARTOUCHE A BLANC
INCENDIAIRE
INITIATION A LIMPACT
CATEGORY
CATEGORIE
CODE
APPLIED BY
APPLIQUE PAR
CHARACTERISTICS
CARACTERISTIQUES
POL
POL
RIFLE GRENADE
LAUNCHING CHARGE
CHARGE DE
LANCEMENT POUR
GRENADE A FUSIL
DUMMY
INERTE
POL
ORIGINAL
NATO UNCLASSIFIED
Sigle du fabricant
3. Caliber
Calibre
4. Weight sign
Signe de poids
6. Abbreviation of round
Abbrviation du projectile
Following marks are recommended, but not obligatory:
Dnomination de la fuse
ORIGINAL
NATO UNCLASSIFIED
Sigle du fabricant
3. Caliber
Calibre
4. Weight sign
Signe de poids
6. Abbreviation of round
Abbrviation du projectile
7. Fuse name
Dnomination de la fuse
ORIGINAL
NATO UNCLASSIFIED
1.
Proportion du mlange
2.
3.
Manufacturer
Fabricant
4.
Lot number
Numro de lot
5.
Year of production
Anne de fabrication
6.
7.
Type of explosive
Type dexplosif
8.
9.
Catgorie de masse
ORIGINAL
NATO UNCLASSIFIED
1. Melting portion
Proportion du mlange
2. Lot number
Numro de lot
Note :
The small cross is embossed to base cross after every recalibration. The size of cross is about 3mm.
Une petite croix est grave sur la base aprs chaque recalibration.
PAINTED MARKS ON CARTRIDGE
MARQUAGES PEINTS SUR LE CORPS DU PROJECTILE
Note :
For reduced charges CZE, SVK, HUN and POL use black ring over the markings.
Pour charges rduites CZE, SVK, HUN et POL utilise une bande noire
travers des marquages.
ORIGINAL
NATO UNCLASSIFIED
1.
Lot number
Numro de lot
2.
3.
Type of charge
Type de chargement
4.
5.
Type of powder
Type de poudre
6.
Assembly lot
Lot dassemblage
7.
Weight
Poids
8.
9.
Upper charge
Charge suprieure
Charge infrieure
ORIGINAL
NATO UNCLASSIFIED
1. Sign of manufacturer
2
Signe du fabricant
1
2. Fuse name
Dnomination de la fuse
1. Sign of manufacturer
1
Signe du fabricant
2. Primer type
Type dallumeur
3
ORIGINAL
NATO UNCLASSIFIED
Research ammunition
Developmental ammunition
Unique ammunition being evaluated
Modified ammunition (research, developmental or improved)
Test ammunition (reseach, developmental or improved)
All submunitions associated with the above
Munitions ltude
Munitions en dveloppement
Munitions modifies (recherche, dveloppement ou amliors)
Munitions dessai (recherche, dveloppement ou amliors)
Toutes les sous-munitions associes aux munitions prcdentes.
2. The colour coding format will follow the basic fundamental principles that are
applied for tactical ammunition
Le format des codes de couleurs suit les principes de base fondamentaux dapplication pour les munitions tactiques
3. Some member states use special colours and/or markings for experimental/test
ammunition.
They are listed in the table below.
Il y a des Etats-membres qui utilisent des couleurs et/ou des marquages spciales
pour les munitions exprimentales/dessai.
Ils sont lists dans un tableau ci-aprs.
ORIGINAL
NATO UNCLASSIFIED
NATION
BEL
No special markings
Pas de marquage spcial
No special colour
Pas de couleur spciale
CAN
No special markings
Pas de marquage spcial
Orange
Orange
CZE
No special colour
Pas de couleur spciale
DNK
No special markings
Pas de marquage spcial
Orange
Orange
FRA
No special markings
Pas de marquage spcial
No special colour
Pas de couleur spciale
DEU
No special markings
Pas de marquage spcial
No special colour
Pas de couleur spciale
GRC
No special markings
Pas de marquage spcial
Orange
Orange
HUN
No special markings
Pas de marquage spcial
No special colour
Pas de couleur spciale
ITA
No special markings
Pas de marquage spcial
No special colour
Pas de couleur spciale
LUX
N/A
N/A
NLD
No special markings
Pas de marquage spcial
Orange
Orange
NOR
N/A
N/A
POL
"EKSPERYMENTALNY"
marked in white letters
No special colour
Pas de couleur spciale
PRT
No special markings
Pas de marquage spcial
Orange
Orange
ESP
No special markings
Pas de marquage spcial
No special colour
Pas de couleur spciale
TUR
No special markings
Pas de marquage spcial
No special colour
Pas de couleur spciale
GBR
No special markings
Pas de marquage spcial
Violet
Violette
USA
No special markings
Pas de marquage spcial
Orange
Orange
ORIGINAL
Dark Green
Fed.std. 595, 34108
C100, Y90, M60, K0
Forest Green
Fed.std. 595, 34087/34088
C40, Y100, M16, K60
Black
Fed.std. 595, 37038
C0, Y0, M0, K100
Orange
Fed.std. 595, 32246
C0, Y100, M90, K0
Silver/Aluminum
Fed.std. 595, 17178
C0, Y0, M0, K25
Purple
Fed.std. 595, 37100
C70, Y15, M90, K15
Light Blue
Fed.std. 595, 35109
C90, Y10, M0, K70
Yellow
Fed.std. 595, 33538
C0, Y100, M30, K0
Bronze
Fed.std. 595, 17043
C0, Y90, M20, K50
Olive Drab
Fed.std. 595, 34087
C0, Y60, M0, K90
Dark Red
Fed.std. 595, 31136
C0, Y85, M100, K40
Light Green
Fed.std. 595, 34558/34449
C35, Y45, M5, K0
Grey
Fed.std. 595, 36231
C0, Y0, M0, K70
White
Fed.std. 595, 37875
C0, Y0, M0, K0
Brown
Fed.std. 595, 30117/30140
C0, Y100, M56, K60
Light Red
Fed.std. 595, 31158
C20, Y60, M100, K0