Académique Documents
Professionnel Documents
Culture Documents
RP 405 / 435
RP 435
1755.99.21.02 04.09
Ersatzteilliste
Spare Parts List
Manuel des pièces de rechange
Hinweise für die Ersatzteilbestellung Instructions for ordering Spare Parts Conseils pour la commande de pièces de
Die auf den einzelnen Blättern vorhandenen Parts illustrated on the following pages are rechange
Abbildungen sind mit Positionsnummern marked with item numbers. The text below Les illustrations qui se trouvent sur les
versehen. Diese geben im darunterliegenden will assist you to identify their part numbers différentes feuilles sont pourvues de numéros
Text die Teil-Nummern und deren and respective description. To avoid errors, de position. Ces derniers indiquent dans le
Bezeichnung an. Jede Bestellung muß zur each part order must show the following texte situé en dessous les numéros des
Vermeidung von Irrtümern folgende Angaben details: pièces et leur désignation. Afin d'éviter toute
enthalten: erreur et défaut de livraison, il convient que
toute commande mentionne les indications
suivantes:
• Teil-Nummer und Benennung des • Part number and desription of part (statet • Numéro de pièce et désignation de la
Ersatzteils (in dieser Liste feststellen) in the list) pièce de rechange (à constater dans cette
• Menge der gewünschten Ersatzteile • Quantity of parts required liste)
• Gewünschte Lieferart (Post, Frachtgut, • Mode of delivery (post, freight, express) • Quantité de pièces de rechange désirées
Expreß) • Full address of purchaser (incl. postal • Condition de livraison souhaitée (Poste,
• Volle Anschrift des Bestellers (mit code) Colis Ferroviaire, Express)
Postleitzahl) • Adresse compléte du client passant
commande (avec code postal)
Die in dieser Liste aufgeführten Teil-Num- Part numbers listed in this booklet have Les numéros de pièce mentionnés dans cette
mern haben Vorrang vor auf manchen Teilen priority over any other number impressed on liste ont la priorité sur les désignations
eingegossenen oder eingeprägten Be- parts. coulées ou estampées sur certaines pièces.
zeichnungen. Schrauben, Muttern, Feder- Bolts, nuts, springwashers and shims for as- Les boulons, écrous, rondelles servant à la
ringe und Scheiben zum Befestigen kom- sembling component parts are normally not fixation de groupes de pièces détachées
pletter Ersatzteilgruppen werden normaler- included in the delivery. If these are required, complets ne sont normalement pas joints à la
weise nicht mitgeliefert. Bei Bedarf ist die please state the part number of those fitting livraison. En cas de besoin, indiquer le
Teil-Nummer der Befestigungsteile parts. numéro de pièce des éléments de fixation.
anzugeben.
Das Teil-Nummer-Verzeichnis am Ende der The part number index at the end of this list La liste des numéros de pièces à la fin de la
Liste dient zum schnellen Aufsuchen von is to identify the position of the part when the liste sert à retrouver rapidement les pièces
Teilen, deren Nummer bekannt ist. number is known. dont le numéro est connu.
Abkürzungen / Symbole: Abbreviations / Symbols: Abréviations / Symboles:
6kt Sechskant hex. hexagon 6-pans six-pans
kpl. komplett cpl. complete cpl. complet
* nicht abgebildet * not illustrated * ne figure pas sur l'illustration
nB nach Bedarf nB as required nB si nécessaire
Die Abbildungen sind für Form und Aus- Illustrations and technical data are not bin- Les schémas n'engagent pas la responsabi-
führung nicht verbindlich. ding. lité du fabricant.
Die Fabrik-Nummer ist auf dem unten ge- The serial number is stamped into the model Le Numéro de Fabrication est indiqué sur la
zeigten Typschild angegeben. Garantiefälle identification plate shown in the illustration. plaque de numéro ci-contre. Les demandes
und Rückfragen können ohne Angabe der As it is essential to quote this number in full en garantie ou les questions sans numéro de
Fabrik-Nummer nicht bearbeitet werden. in all your enquiries and spare part orders, fabrication ne peuvent être traitées. Veuillez
Bitte tragen Sie diese gleich nach we recommend you to note it down in the box en conséquence inscrire ce numéro ci-des-
Auslieferung in das Feld unter der Abbildung under the illustration. sous dès livraison:
ein.
© 2009 by Welger Maschinenfabrik GmbH, Wolfenbüttel; Printed in Germany. All rights reserved. Design and
construction subject to alterations.
Welger Maschinenfabrik GmbH
Gebrüder-Welger-Straße • D-38304 Wolfenbüttel
Telefon: (05331) 40 41 42 • Telefax: (05331) 40 41 43
# e-mail: wmf@welger.com
Achse
Road Axle
Essieu
A
Gestell und Zubehör
Bale Chamber and Accessories
Chambre de Pressage et Accessoires
B
Aufsammler
Pick-up Reel
Ramasseur
C
Antrieb
Main Drive
Commande Principale
D
Antriebsketten
Drive Chains
Chaînes de Commande
E
Werkzeug • Beschriftung • Technische Dokumentation
Tools • Decals • Technical Documentation
Outillage • Decalcomanies • Documentation Technique
F
Walzen
Rollers
Rouleaux •
G
Bindung
Tying Unit
Liage
H
Hydraulikeinrichtung • Elektrik
Hydraulic System • Electrical Outfit
Equipement Hydraulique • Installation Electrique
J
Schutzvorrichtung • Beleuchtung
Guards • Lighting Equipment
Protecteurs • Eclairage Electrique
K
Teilnummern-Verzeichnis
Part Number Index
Répertoire Numérique des Pieces Detachees
L
9
6
10
2
8
3
5
4
7
1
1752-068
04.09 WELGER RP 405 / RP 435 A 10
LAUFACHSE Typen-Nr. E7061960R9 FAD EBV 701
CARRING AXLE Identification No. E7061960R9 FAD EBV 701
04.09
18
16
17
20 12
16
17 11
5
18
1 2
WELGER RP 405 / RP 435
3
9
15
13
14
7 4 10 8
A 15
1752-059
BREMSACHSE BIS 40 KM/H Typen-Nr. FAD F 70E 197 0R9
BRAKE AXLE UP TO 40 KM/H Identification No. FAD F 70E 197 0R9
04.09
1-21 0942.40.14.00 1 Bremsachse kpl. brake axle, cpl. essieu de freinage, cpl.
1 1 Achskörper, nicht einzeln lieferbar axle, not separately available essieu, pas disponible seul
2-6 2 Bremstrommel kpl. brake drum cpl. tambour de frein cpl.
2 0942.41.62.00 2 Bremstrommel brake drum tambour de frein
3 0942.40.27.00 2 Radnabe wheel hub moyeu de roue
4 0942.40.53.00 2 Kegelrollenlager, außen tap.roller bearing, outside roulement a rouleaux coniques,
5 0942.40.57.00 2 Kegelrollenlager, innen tap.roller bearing, inside roulement a rouleaux coniques, intérieur
6 0942.41.63.00 12 Riffelbolzen wheel stud goujon de roue
7 0908.88.03.00 12 Kugelbundmutter wheel nut écrou de jante M18x1,5
8 0942.41.51.00 2 Radkappe wheel cap chapeau de moyeu de roue
WELGER RP 405 / RP 435
14
21
13
17
12
WELGER RP 405 / RP 435
23
12
22
16
20
15 1/ 4/ 6
8 / 10
19
18
3/ 5/ 7
9 / 11
A 20
1755-151
BEREIFUNG / BEFESTIGUNGSTEILE
TYRES / FIXING PARTS
04.09
1-3 0944.11.23.00 2 Rad kpl. Conti AW wheel cpl. roue, cpl. 15.0/55-17/ET0
1-3 0944.11.22.00 2 Rad kpl. UNI-Hersteller wheel cpl. roue, cpl. 15.0/55-17/ET0
1 0944.21.23.00 2 Reifen Conti AW tyre pneu 15.0/55-17
1 0944.21.25.00 2 Reifen UNI-Hersteller tyre pneu 15.0/55-17
2* 0944.30.86.00 2 Schlauch tube chambre a air 15.0/55-17T
3 0944.52.21.00 2 Scheibenrad rim jante de roue 13.00x17/ET0
4+5 0944.11.47.00 1 Rad kpl. rechts wheel cpl. right roue, cpl. droite 19.0/45-17/ET-35/TL
4+5 0944.11.48.00 1 Rad kpl. links wheel cpl. left roue, cpl. gauche 19.0/45-17/ET-35/TL
4 0944.21.51.00 2 Reifen tyre pneu
WELGER RP 405 / RP 435
10+11 0944.13.53.00 1 Rad kpl. rechts wheel cpl. right roue, cpl. droite 500/55-20/ET-100/TL
10+11 0944.13.54.00 1 Rad kpl. links wheel cpl. left roue, cpl. gauche 500/55-20/ET-100/TL
10 0944.29.20.00 2 Reifen tyre pneu
11 0944.52.56.00 2 Scheibenrad rim jante de roue 16.00x20S/ET-100
nur für Bereifung mit Bremsachse only for tyres with brake axle pour pneus avec essieu de freinage 500/55-20
15 1740.02.03.03 2 Distanzstück spacer entretoise
16 1752.02.03.05 2 Beilage shim cale
17 0901.12.51.00 6 6kt-Schraube hex. bolt boulon a tête hex M16x120
0910.54.17.00 12 Scheibe washer rondelle 17
0907.60.16.00 6 Sicherungsmutter safety nut contre-écrou NM16
A 20
14
21
13
17
12
WELGER RP 405 / RP 435
23
12
22
16
20
15 1/ 4/ 6
8 / 10
19
18
3/ 5/ 7
9 / 11
A 21
1755-151
BEREIFUNG / BEFESTIGUNGSTEILE
TYRES / FIXING PARTS
04.09
1 22
3
4 9 8
6 9
6 9
21 19
12
14 24
13
WELGER RP 405 / RP 435
17 15 15
23
8 29 25
10 11
9
16
9
20
15 26
8 29 28
9 8 9
27
3
5
9 2
8 7 6 6
18 12 4
14
13
A 30
28
15
1755-143
ZWEILEITUNGS-DRUCKLUFTBREMSANLAGE
TWO LINE-AIR ASSISTED BRAKING SYSTEM
01.09
32
39
31
29
37
36
38 29
29
WELGER RP 405 / RP 435
37
31 28
13
14
14
29
31
29
35
40 33
33
33
A 31
1729 -193 32 33
ZWEILEITUNGS-DRUCKLUFTBREMSANLAGE
TWO LINE-AIR ASSISTED BRAKING SYSTEM
01.09
8
4
3
7
6
5
1729-206
08.05 WELGER RP 405 / RP 435 A 32
ZWEILEITUNGS-DRUCKLUFTBREMSANLAGE / ANHÄNGER-BREMSVENTIL
TWO LINE-AIR ASSISTED BRAKING SYSTEM / TRAILER BRAKE VALV
08.05
WABCO
1-7 0960.14.88.00 1 Kombination combination combinaison
1 0960.15.23.00 1 Anhänger-Bremsventil trailer brake valve soupage de freinage
2 0960.15.29.00 1 Bremskraftregler load apportioning valve regulateur de puissance necessaire
3 0901.20.68.00 2 6kt-Schraube hex.bolt boulon à tête hex. M8x25
0907.10.08.00 2 6kt-Mutter hex.nut écrou hexagonal M8
0910.10.08.00 2 Scheibe washer rondelle 8.4
4 0960.22.60.00 1 Dichtring sealing washer joint thorique
5 0960.22.02.00 1 Verschlussschraube lock bolt bouchon fileté M22x1.5
6 0925.40.22.00 1 Dichtring sealing washer joint thorique A22x27
WELGER RP 405 / RP 435
KNORR
1-7 0960.14.86.00 1 Kombination combination combinaison
1 0960.15.37.00 1 Anhänger-Bremsventil trailer brake valve soupage de freinage
2 0960.15.36.00 1 Bremskraftregler load apportioning valve regulateur de puissance necessaire
3 0901.20.68.00 2 6kt-Schraube hex.bolt boulon à tête hex. M8x25
0907.10.08.00 2 6kt-Mutter hex.nut écrou hexagonal M8
0910.10.08.00 2 Scheibe washer rondelle 8.4
4 0960.15.54.00 1 Dichtring sealing washer joint thorique
5 0960.22.02.00 1 Verschlussschraube lock bolt bouchon fileté M22x1.5
6 0925.40.22.00 1 Dichtring sealing washer joint thorique A22x27
7 0901.20.65.00 1 6kt-Schraube hex.bolt boulon à tête hex. M8x13
0910.10.08.00 1 Scheibe washer rondelle 8.4
HALDEX
1-8 0960.14.89.00 1 Kombination combination combinaison
1 0960.15.35.00 1 Anhänger-Bremsventil trailer brake valve soupage de freinage
2 0960.15.34.00 1 Bremskraftregler load apportioning valve regulateur de puissance necessaire
3 0901.20.68.00 2 6kt-Schraube hex.bolt boulon à tête hex. M8x25
0907.10.08.00 2 6kt-Mutter hex.nut écrou hexagonal M8
0910.10.08.00 2 Scheibe washer rondelle 8.4
4 0960.15.50.00 1 Dichtring sealing washer joint thorique
5 0960.22.02.00 1 Verschlußschraube lock bolt bouchon fileté M22x1.5
6 0925.40.22.00 1 Dichtring sealing washer joint thorique A22x27
7 0901.20.65.00 1 Sechskantschraube hex.bolt boulon à tête hex. M8x13
A 32
16
24
26
27 28 15
23
29 17
20 19
21
12
WELGER RP 405 / RP 435
8
20 7
18
25
26 12
8
5
10 19
9 11 3 6 10
14 5
3
2
1
1
13
A 40
1724-057
HYDRAULIKBREMSE
HYDRAULIK BRAKING SYSTEM
08.05
FREIN HYDRAULIQUE
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
3
9
2 6 15
1 7 13
6
10
WELGER RP 405 / RP 435
7
8
9 14
16
19
10
12
11 18
19
17
A 45
1755-015
FESTSTELLBREMSE
MANUALLY OPERATED BRAKE
08.05
FREIN DE BLOCAGE
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
12
1
1
2
1
WELGER RP 405 / RP 435
15
20
18 19
16
17 7
5
2 6
17 4
3 2 9 8 10
11
14
13
B 10
12
1755-152
GESTELL / HECKKLAPPE
FRAME / TAIL GATE
04.09
7
6
5
1
3
2
10
4
11
6
7
1755-171
04.09 WELGER RP 405 / RP 435 B 11
GESTELL / ZUBEHÖR
FRAME / ACCESSORIES
04.09
CHÂSSIS / ACCESSORIES
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
21
24
19
9
24
20 26
11 22 25
24
23
24
WELGER RP 405 / RP 435
4 23
Zugpendel
8 76 2 Low hitch
Barre d'attelage
27
13
14
3 Zugmaul
16 5 High hitch
12
15 Chape d'attelage
17
18
18
1
B 20
1757-004
ZUGVORRICHTUNG / DEICHSELKONSOLE
DRAWBAR / DRAWBAR SUPPORT
04.09
17 5
3 11
4
2
9 16
12 10
7 15
8
WELGER RP 405 / RP 435
14
21
20
18
1
13
19
B 30
1729-004
STÜTZFUSS
SUPPORT LEG
04.09
BEQUILLE
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
z nur für Niederhalter mit Rolle only for windguard with roller seul. pour egalisateur avec rouleau
B 30
21
04.09
21
17
15 20
21
13 12
WELGER RP 405 / RP 435
14
4
16 21 3
22
2
3
18
6
1
5
6
9
11
10 6
19 1
5
6
B 40
8 7
1755-153
VERRIEGELUNG
LOCKING SYSTEM
04.09
SYSTEME DE FERMENTURE
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
1 1755.08.01.04 2 Haken mit Buchse hook with bush crochet avec douille
2 0920.15.35.00 2 Laufbuchse sleeve douille 35x40x25
3 0910.72.79.00 4 Passscheibe shim washer rondelle d'ajustage 35x45x1
4 0912.10.35.00 2 Sicherungsring circlip circlip 35x1,5
5 1752.08.01.27 2 Rolle roller poulie
6 1712.08.03.14 4 Teller disc disque
7 0915.51.66.00 2 Spannhülse expanding pin goupille mecanindus 6x80
8 0926.10.41.00 2 Kegelschmiernippel grease nipple graisseur conique M6x1
9 0940.29.87.00 2 Zugfeder kpl. tension spring, cpl. ressort tendeur, cpl.
10 0901.21.70.00 2 6kt-Schraube hex.bolt boulon à tête hex. M12x200
WELGER RP 405 / RP 435
7
9
1
9
2
8
A
3
7
B
6
C
B
A
C
1755-170
04.09 WELGER RP 405 / RP 435 B 50
RIEMENFÜHRUNG
BELT SHIFTER
04.09
LANIÈRE GUIDAGE
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
12
10
16 10
11
15
14
7
WELGER RP 405 / RP 435
9
3
5
4
4 2
5 1
2
6 8
9
B 60
1752-022
SCHWINGE
ROCKER ARM
04.09
BALANCIER
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
7 1
8 10
3
2
9 11
13
14
12 5
15
16 4
B 70
15
1752 - 080 18 17
BALLENAUSWERFER
BALE EJECTOR
04.09
EJECTEUR DE BALLES
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
7
4
2
8 9
3
4
WELGER RP 405 / RP 435
7
6
5 12
10
13
11
8
12 1 10
9
14
15
B 75
1755-092 11
AUSWURFHILFE - BREITE 500
EJECTION ROLLER - BREADTH 500
04.09
1-15 1752.92.06.01 1 Schwinge einbaufertig rocker arm, ready for mounting balancier prêt à être monté
1 1752.92.06.03 1 Schwinge rocker arm balancier
2 1752.92.06.11 1 Walze roller rouleau
3 1752.92.06.17 1 Achse axle axe
4 0922.12.95.00 2 Rillenkugellager ball bearing roulement
5 1753.16.02.08 2 Dichtscheibe sealing disc flasque
6 1724.14.02.14 2 Schutzscheibe seal bague d'etancheite
7 0925.33.70.00 2 Nilosring nilos ring bague nilos 6210 ZAV
8 0901.30.43.00 6 6kt-Schraube hex.bolt boulon à tête hex. Verbusplus
9 0901.30.88.00 2 6kt-Schraube hex.bolt boulon à tête hex. Verbusplus
WELGER RP 405 / RP 435
7 8 5
15
20 21
16
8 20 19
22 24 23
13 11 6
14
15
4 3 1 16
6 17
WELGER RP 405 / RP 435
18
8
25
10 12
8
7
9
27
12
2 26
10
2
1
11 13
3
4
C 10
1741-011
AUFSAMMLER UND SCHNECKENANTRIEB AUFSAMMLER MIT ROTOR
PICK-UP AND STUB AUGER DRIVE PICK-UP WITH ROTOR
04.09
15
13
10
WELGER RP 405 / RP 435
11 9
1
5 15
19
2
8 18
17
7
3
3
6
4
C 15
12 14
1729-078
AUFSAMMLERGESTELL AUFSAMMLER MIT ROTOR
PICK-UP FRAME PICK-UP WITH ROTOR
04.09
22
23 1 2
3
24
20
18
17
6
12
WELGER RP 405 / RP 435
21
14
4
6
11 22
13
19
15
5 7
10 23 25
8
9
16
C 20
1724-067
ZINKENTROMMEL AUFSAMMLER MIT ROTOR
TINE DRUM PICK-UP WITH ROTOR
04.09
1 1257.52.12.01 1 i Tragwelle, kpl. mit Nr. 2 + 3 centre shaft, cpl. with No. 2 + 3 arbre, cpl. avec No. 2 + 3
1741.52.02.01 1 ¡ Tragwelle, kpl. mit Nr. 2 + 3 centre shaft, cpl. with No. 2 + 3 arbre, cpl. avec No. 2 + 3
2 0313.57.00.00 2 Lagerschale bearing box coussinet
3 0346.32.00.00 1 Klammer clamp clips
4 0313.57.00.00 8 Lagerschale bearing box coussinet
5 0346.32.00.00 4 Klammer clamp clips
6 0915.51.84.00 8 Spannhülse expanding pin goupille mecanindus 8x36
0915.51.35.00 8 Spannhülse expanding pin goupille mecanindus 5x36
7-10 1257.52.12.24 4 Steuerhebel, kpl. lever, cpl. levier, cpl.
7 1257.52.12.25 4 Hebel lever levier
WELGER RP 405 / RP 435
2
3
7
6
9
11
10
1
8
1724-070
04.09 WELGER RP 405 / RP 435 C 25
NIEDERHALTER / SCHUTZVORRICHTUNGEN AUFSAMMLER MIT ROTOR
WINDGUARD / PROTECTION PICK-UP WITH ROTOR
04.09
4
15
WELGER RP 405 / RP 435
16
14
9
12
8
21 7
6
17
20 13
5
19
18
1
2
C 27
10 11
1729-079 3
NIEDERHALTER MIT ROLLE AUFSAMMLER MIT ROTOR
WINDGUARD WITH ROLLER PICK-UP WITH ROTOR
04.09
1-11 1724.52.07.01 1 Niederhalter mit Rolle, kpl. windguard with roller, cpl. egalisateur avec rouleau, cpl.
1724.52.37.01 1 ¡ Niederhalter mit Rolle, kpl. windguard with roller, cpl. egalisateur avec rouleau, cpl.
1 1724.52.07.53 1 Rolle roller poulie
1724.52.37.53 1 ¡ Rolle roller poulie
2 0924.20.22.00 2 Blechflanschlager flange bearing roulement avec flasques RAT 30
3 0907.10.10.00 4 6kt-Mutter hex.nut écrou hexagonal M10
0911.10.10.00 4 Federring spring washer rondelle grower A10
4 1724.52.07.22 1 Rechen rake râteau
1724.52.37.18 1 ¡ Rechen rake râteau
5 0903.10.73.00 2 Flachrundschraube cup head bolt vis à tête ronde M10x35
WELGER RP 405 / RP 435
4
5
1
7
1
10
1741-012
04.09 WELGER RP 405 / RP 435 C 30
AUFSAMMLERSTÜTZRAD AUFSAMMLER MIT ROTOR
PICK-UP GUIDE WHEEL PICK-UP WITH ROTOR
04.09
1
2
10
11 13
WELGER RP 405 / RP 435
12
14
15
4 5
9
8
7
16
6
16
7
8
9
C 35
1246-209
SCHARWENZELRAD AUFSAMMLER MIT ROTOR
CASBER WHEEL PICK-UP WITH ROTOR
04.09
1-16 1724.52.40.01 1 Scharwenzelrad, links kpl. castor wheel, left cpl. roue pivotante, gauche cpl.
3-18 1724.52.40.41 1 Scharwenzelrad, rechts kpl. castor wheel, right cpl. roue pivotante, droit cpl.
1 1724.52.40.03 1 Rohrträger, links wheel support, left support de rone, gauche
2 1724.52.40.20 1 Hebel, links lever, left levier, gauche
3 0926.10.03.00 2 Schmiernippel grease nipple graisseur AM 10x1
4 1257.52.20.84 2 Gabel fork fouschette
5 0944.90.92.00 2 Luftrad guide wheel roue
6 1257.52.20.94 2 Achse axle axe
7 1257.52.20.95 4 Buchse bush douille
8 0910.10.17.00 4 Scheibe washer rondelle 17x30x3
WELGER RP 405 / RP 435
14 12
1
13
WELGER RP 405 / RP 435
10
8 16
11
4
3
9
2
16
15
7
6
5
C 40
1724-202
VORGELEGE AUFSAMMLER MIT ROTOR
INTERMEDIATE GEAR PICK-UP WITH ROTOR
01.09
6 0930.40.21.00 i24/¡16 Druckfeder, außen pressure spring, outside ressort de pression exterieur
7 0930.40.22.00 i24/¡16 Druckfeder, innen pressure spring, inner ressort de pression, intérieur
8 0901.30.48.00 6 i 6kt-Schraube hex.bolt boulon à tête hex. M 8x25
0910.60.08.00 6 i Scheibe washer rondelle A 8,4
0901.30.45.00 6 ¡ 6kt-Schraube hex.bolt boulon à tête hex. M 8x20
0910.10.08.00 6 ¡ Scheibe washer rondelle A 8,4
9 0934.73.09.00 1 Kettenrad chain sprocket roue à chaîne 12 B-1; Z=32
10 1724.53.33.37 1 Distanzhülse distance bush/sleeve douille d'entretoisement
11 0924.20.60.00 1 Flanschgehäuse m. Einstellager flange hous. with tapered bearing roulement oscillant RATR 35
12 0903.10.71.00 7 Flachrundschraube cup head bolt vis à tête ronde M 10x25
0907.10.10.00 7 6kt-Mutter hex.nut écrou hexagonal M 10
0911.58.10.00 7 Sperrkantscheibe washer rondelle
13 1724.53.33.35 1 Lagerplatte baering plate plaque d' appui
14 0934.17.03.00 1 Rollenkette roller chain chaîne à rouleaux 12B-2x22 E
15 0912.10.36.00 3 Sicherungsring retaining ring jonc 35x2,5
16 0910.72.79.00 nB Paßscheibe shim washer rondelle d'ajustage 35x45x1
0910.72.78.00 nB Paßscheibe shim washer rondelle d'ajustage 35x45x0,5
0910.72.77.00 nB Paßscheibe shim washer rondelle d'ajustage 35x45x0,3
14
1
13
16
WELGER RP 405 / RP 435
17
12 11
8
10
4
3
9
2
16
15
7
6
5
C 41
1754-001
VORGELEGE AUFSAMMLER MIT ROTOR RP 405
INTERMEDIATE GEAR PICK-UP WITH ROTOR RP 405
04.09
1 2
WELGER RP 405 / RP 435
13
8 11 10 7
12
6 7 4
10
8
9
5
C 45
11
1729 -094
FÖRDERGEHÄUSE UND SCHNECKEN AUFSAMMLER MIT ROTOR
FEEDER HOUSING AND STUB AUGER PICK-UP WITH ROTOR
04.09
1754.54.61.02 1 ¡ Schnecke, links mit Nr.7 stud auger, left with no.7 vis sans fin, gauche avec no.7
6 1754.54.61.16 1 Schnecke, rechts mit Nr.7 stud auger, left right no.7 vis sans fin, droite avec no.7
1754.54.61.06 1 ¡ Schnecke, rechts mit Nr.7 stud auger, left right no.7 vis sans fin, droite avec no.7
7 0925.14.50.00 nB Dichtring saeling washer joint thorique
8-10 1724.54.01.22 2 Lager kpl. bearing cpl. roulement cpl.
8 1257.35.03.01 2 Lager bearing roulement
9 0922.12.47.00 2 Rillenkugellager ball bearing roulement 6007-2 RS
10 0922.12.48.00 2 Rillenkugellager ball bearing roulement 6008-2 RS
11 0903.10.70.00 8 Flachrundschraube cup head bolt vis à tête ronde M 10x20
0907.83.10.00 8 Spring-Stop.Mutter spring-stop nut frein écrou M10
12 1724.54.04.08 1 Leiste, links stripe, left fer plat, gauche
1724.54.34.02 1 ¡ Leiste, links stripe, left fer plat, gauche
13 1724.54.04.10 1 Leiste, rechts stripe, right fer plat, droite
1724.54.34.07 1 ¡ Leiste, rechts stripe, right fer plat, droite
35
21 10
22
9 14 43 44
1
WELGER RP 405 / RP 435
19 39
22
20
42
33 41
32
27 31 38
26
28 32
24 8 7
6
30 15
12
25 2 5
29 3
28 29
14
13
C 50
34 27
1729 -214 5
4
ZINKENWALZE MIT LAGERUNG, ANTRIEB + ABSTREIFER AUFSAMMLER MIT ROTOR
TINE ROLER WITH BEARING, DRIVE + STRIPPER PICK-UP WITH ROTOR
04.09
35
21 10
22
9 14 43 44
1
WELGER RP 405 / RP 435
19 39
22
20
42
33 41
32
27 31 38
26
28 32
24 8 7
6
30 15
12
25 2 5
29 3
28 29
14
13
C 51
34 27
1729 -214 5
4
ZINKENWALZE MIT LAGERUNG, ANTRIEB + ABSTREIFER AUFSAMMLER MIT ROTOR
TINE ROLER WITH BEARING, DRIVE + STRIPPER PICK-UP WITH ROTOR
04.09
24-34 1724.53.45.01 1 Kettenspanner kpl. chain tensioner cpl. tendeur de chaîne cpl.
24 1724.53.45.03 1 Spannbock tension block support de tendeur
25 1724.53.45.10 1 Arm arm bras
26 1724.53.45.16 1 Zugstange pull rod tirant
27 0901.12.16.00 2 6kt-Schraube hex.bolt boulon à tête hex. M 14x150
28 0910.10.15.00 nB Scheibe washer rondelle 15
29 0907.60.14.00 2 Sicherungsmutter safety nut contre-écrou NM 14
30 0934.99.04.00 1 Spannklotz tensioning block bloc tendeur
31 0940.91.74.00 1 Gummifeder rubber buffer ressort en caoutchouc
32 0910.80.45.00 3 Scheibe washer rondelle
WELGER RP 405 / RP 435
¡ nur bei Garnbindung only for twine tying pour liage à ficelle
C 51
35
21 10
22
9 14 43 44
1
WELGER RP 405 / RP 435
19 39
22
20
42
33 41
32
27 31 38
26
28 32
24 8 7
6
30 15
12
25 5
29 3
28 29 2
14
13
C 55
34 27
1729 -215 5
4
ZINKENWALZE MIT LAGERUNG, ANTRIEB + ABSTREIFER AUFSAMMLER MIT ROTOR
TINE ROLER WITH BEARING, DRIVE + STRIPPER PICK-UP WITH ROTOR
04.09
9 0924.20.75.00 1 Flanschlager rechts kpl. flange bearing right cpl. roulememt avec flasque droite cpl. TME 60 FA 118.01 AH 02
mit Nr.10, 11 with no.10, 11 avec no.10, 11
10 0922.18.44.00 1 Rillenkugellager ball bearing roulement GE 60 KPPB 3
11 0926.10.12.00 1 Kegelschmiernippel grease nipple graisseur conique BR 1/8"
12 0910.80.63.00 1 Scheibe washer rondelle Rd.70 ;Ig.10
13 0901.20.64.00 6 6kt-Schraube hex. bolt boulon à tête hex. M 8x16
0911.50.08.00 6 Fächerscheibe serrated lock washer rondelle en éventail A 8,4
14 1724.53.02.36 2 Wickelschutz anti wrapping cap protecteur anti emoulement
15 1724.53.11.01 1 Kettenrad chain sprocket roue à chaîne
16 1724.53.12.35 1 Kettenrad chain sprocket roue à chaîne
17 1724.53.12.05 1 Distanzhülse distance bush douille d'entretoisement
18 0901.11.46.00 1 6kt-Schraube hex. bolt boulon à tête hex. M 12x75
0911.85.12.00 1 Scheibenpaar pair of washer paire de rondelle M12
19 0934.74.67.00 1 Kettenrad chain sprocket roue à chaîne
20 1724.53.12.11 1 Distanzhülse distance bush douille d'entretoisement
21 0912.10.61.00 1 Sicherungsring circlip circlip 60x3
22 0910.74.63.00 nB Passscheibe shim washer rondelle d'ajustage 60x75x0,5
0910.74.64.00 nB Passscheibe shim washer rondelle d'ajustage 60x75x1,0
23 0910.73.43.00 nB Passscheibe shim washer rondelle d'ajustage 45x55x0,5
0910.73.42.00 nB Passscheibe shim washer rondelle d'ajustage 45x55x0,3
0910.73.40.00 nB Passscheibe shim washer rondelle d'ajustage 45x55x0,1
0910.73.44.00 nB Passscheibe shim washer rondelle d'ajustage 45x55x1,0
C 55
35
21 10
22
9 14 43 44
1
WELGER RP 405 / RP 435
19 39
22
20
42
33 41
32
27 31 38
26
28 32
24 8 7
6
30 15
12
25 5
29 3
28 29 2
14
13
C 56
34 27
1729 -215 5
4
ZINKENWALZE MIT LAGERUNG, ANTRIEB + ABSTREIFER AUFSAMMLER MIT ROTOR
TINE ROLER WITH BEARING, DRIVE + STRIPPER PICK-UP WITH ROTOR
04.09
24-34 1724.53.45.01 1 Kettenspanner kpl. chain tensioner cpl. tendeur de chaîne cpl.
24 1724.53.45.03 1 Spannbock tension block support de tendeur
25 1724.53.45.10 1 Arm arm bras
26 1724.53.45.16 1 Zugstange pull rod tirant
27 0901.12.16.00 2 6kt-Schraube hex.bolt boulon à tête hex. M 14x150
28 0910.10.15.00 nB Scheibe washer rondelle 15
29 0907.60.14.00 2 Sicherungsmutter safety nut contre-écrou NM 14
30 0934.99.04.00 1 Spannklotz tensioning block bloc tendeur
31 0940.91.74.00 1 Gummifeder rubber buffer ressort en caoutchouc
32 0910.80.45.00 3 Scheibe washer rondelle
WELGER RP 405 / RP 435
¡ nur bei Garnbindung only for twine tying pour liage à ficelle
35
21
22
14
1
WELGER RP 405 / RP 435
19 39
42
33 41
32
27 31 38
26
28 32
24 8 7
6
30 15
12
25 5
29 3
28 29
2 14
13
C 60
34 27
1754-002 5
4
ZINKENWALZE MIT LAGERUNG, ANTRIEB + ABSTREIFER AUFSAMMLER MIT ROTOR RP 405
TINE ROLER WITH BEARING, DRIVE + STRIPPER PICK-UP WITH ROTOR RP 405
04.09
ROULEAU DENTELE AVEC ROULEMENT, COMMANDE + RACLEUR RAMASSEUR AVEC ROTOR RP 405
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
35
21
22
14
1
WELGER RP 405 / RP 435
19 39
42
33 41
32
27 31 38
26
28 32
24 8 7
6
30 15
12
25 5
29 3
28 29
2 14
13
C 61
34 27
1754-002 5
4
ZINKENWALZE MIT LAGERUNG, ANTRIEB + ABSTREIFER AUFSAMMLER MIT ROTOR RP 405
TINE ROLER WITH BEARING, DRIVE + STRIPPER PICK-UP WITH ROTOR RP 405
04.09
ROULEAU DENTELE AVEC ROULEMENT, COMMANDE + RACLEUR RAMASSEUR AVEC ROTOR RP 405
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
24-34 1724.53.45.01 1 Kettenspanner kpl. chain tensioner cpl. tendeur de chaîne cpl.
24 1724.53.45.03 1 Spannbock tension block support de tendeur
25 1724.53.45.10 1 Arm arm bras
26 1724.53.45.16 1 Zugstange pull rod tirant
27 0901.12.16.00 2 6kt-Schraube hex.bolt boulon à tête hex. M 14x150
28 0910.10.15.00 nB Scheibe washer rondelle 15
29 0907.60.14.00 2 Sicherungsmutter safety nut contre-écrou NM 14
30 0934.99.04.00 1 Spannklotz tensioning block bloc tendeur
31 0940.91.74.00 1 Gummifeder rubber buffer ressort en caoutchouc
32 0910.80.45.00 3 Scheibe washer rondelle
WELGER RP 405 / RP 435
22
14 22
20
21
13 23
WELGER RP 405 / RP 435
15
16
18
11 17
7
19 6
23 5
21
20 4
3 2
9
10
12
C 65
8
1729-216
MESSERBODEN OHNE SCHNEIDWERK / BODENFEDERUNG AUFSAMMLER MIT ROTOR
KNIFE BOTTOM PLATE WITHOUT CUTTING DEVICE / BOTTOM PLATE SUSPENSION PICK-UP WITH ROTOR
04.09
TOLE DE FOND DES LAMES SANS DIPOSITIF DE COUPE / SUSPENSION DE FOND A RESSORT RAMASSEUR AVEC ROTOR
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
28
26
27
24
23
12 23
11 24
WELGER RP 405 / RP 435
13
19
21
20
7
22 6
5
26 4
27
18 24
1 17
15
16 2
3
9
10
25
C 70
14 25 8
1729-217
MESSERBODEN MIT SCHNEIDWERK / BODENFEDERUNG AUFSAMMLER MIT ROTOR
KNIFE BOTTOM PLATE WITH CUTTING DEVICE / BOTTOM PLATE SUSPENSION PICK-UP WITH ROTOR
04.09
TOLE DE FOND DES LAMES AVEC DIPOSITIF DE COUPE / SUSPENSION DE FOND A RESSORT RAMASSEUR AVEC ROTOR
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
1 1729.55.13.03 1 + Boden -13 Messer bottom plate -13 blades tôle de fond -13 lames
1729.55.17.03 1 + Boden -17 Messer bottom plate -17 blades tôle de fond -17 lames
1729.55.25.03 1 Boden -25 Messer bottom plate -25 blades tôle de fond -25 lames
2-10 1724.55.03.01 2 Federung suspension suspension à ressort
2 1724.55.03.03 2 Lasche strap patte
3 1724.55.03.09 2 Lagerplatte bearing plate plaque d'appui
4 1724.55.03.11 2 Scheibe washer rondelle Rd.65 ; Ig.8
5 0940.91.73.00 2 Gummifeder rubber spring ressort caoutchouc Rd.50/17;Ig.50
6 0910.80.67.00 2 Scheibe washer rondelle
7 0907.60.16.00 2 Sicherungsmutter safety nut contre-écrou NM16
WELGER RP 405 / RP 435
16
15
7
18
17
8
9
WELGER RP 405 / RP 435
5 3
13 4 22
A 21
2
20
14
13 4
6
A
23
19
11
12 15
23 16
10
C 75
1729-117 24
SCHNEIDWERK 13 MESSER STANDARD AUFSAMMLER MIT ROTOR
CUTTING DEVICE 13 BLADE STANDARD PICK-UP WITH ROTOR
04.09
32 33
26 25
2
15 28
8 27
7 38 1
WELGER RP 405 / RP 435
16
17 11 A
35 10
9
34 11
29
34
36
38
33
9 32
3 4
21 11
22 31 25
14 13
A
34
29
19 20
34 26
18
C 80
1729-198
35
SCHNEIDWERK 17 ODER 25 MESSER AUFSAMMLER MIT ROTOR
CUTTING DEVICE 17 OR 25 BLADE PICK-UP WITH ROTOR
04.09
32 33
26 25
2
15 28
8 27
7 38 1
WELGER RP 405 / RP 435
16
17 11 A
35 10
9
34 11
29
34
36
38
33
9 32
3 4
21 11
22 31 25
14 13
A
34
29
19 20
34 26
18
C 81
1729-198
35
SCHNEIDWERK 17 ODER 25 MESSER AUFSAMMLER MIT ROTOR
CUTTING DEVICE 17 OR 25 BLADE PICK-UP WITH ROTOR
04.09
25 0924.20.22.00 2 Gehäuse mit Lager housing with bearing roulement avec flasques RAT 30
26 0907.10.10.00 4 6kt-Mutter hex. nut écrou hexagonal M 10
0911.58.10.00 4 Sperrkantscheibe washer rondelle 10
27 1724.55.50.71 2 Seitenhalter bracket support
28 0903.10.42.00 4 Flachrundschraube cup head bolt vis à tête ronde M 8x25
0907.60.08.00 4 Sicherungsmutter safety nut contre-écrou NM 8
29 0951.11.91.00 2 Hydraulikzylinder hydraulic cylinder cylindre hydraulique
30 1729.55.18.93 1 Bolzen bolt boulon
31 0917.41.34.00 1 Bolzen bolt boulon
32 0910.10.17.00 2 Scheibe washer rondelle 17
WELGER RP 405 / RP 435
9 16
7 11
6
8 15
7
6
30
5 29
28
4
14 27
3 19
WELGER RP 405 / RP 435
2 1
22
21
13
20
10 23 24 25 26
18
31
17
12
D 05
1758-013
GELENKWELLE / FREILAUF WALTERSCHEID
DRIVE SHAFT / FREE WHEEL MECHANISM WALTERSCHEID
04.09
1-31 0930.13.39.00 1 z Gelenkwelle, kpl. drive shaft, cpl. arbre articulé, cpl. 1650 Nm; 1 3/8" 6Z//1 3/8" 6Z
1 0930.45.50.00 1 Schutztrichter guard cone cône protecteur
2 0930.41.39.00 6 Schraube screw vis
3 0930.50.44.00 1 Gleitring bearing ring anneau de glissement
4 0930.41.52.00 1 Verschluss lock fermeture
5 0930.23.12.00 1 Gabel yoke fourche
6 0930.20.22.00 2 Kreuzgarnitur mit Nr.7 cross a. bearing kit with no.7 croisillon avec no.7
7 0930.28.09.00 8 Ronde washer rondelle
8 0930.22.61.00 1 Doppelgabel flange yoke double forche
9 0930.26.73.00 1 Rillengabel inboard yoke mâchoire à gorge
WELGER RP 405 / RP 435
10 0930.53.89.00 1 Schutzhälfte mit Nr.11, 12 guard half with no.11, 12 demi protecteur avec no.11, 12
11 0930.45.51.00 1 Schutztrichter guard cone cône protecteur
12 0930.50.40.00 1 Gleitring bearing ring anneau de glissement
13 0930.42.80.00 1 Profilrohr profile tube tube profil
14 0930.42.79.00 1 Profilrohr profile tube tube profil
15-19 0930.53.48.00 1 Schutzhälfte guard half demi protecteur
15 0930.53.48.00 1 Schutzhälfte guard half demi protecteur
16 0930.50.40.00 1 Gleitring bearing ring anneau de glissement
17 0930.32.62.00 1 Stützring reinforcing collar bague de renfort
18 0930.45.53.00 1 Schutztrichter guard cone cône protecteur
19 0930.49.02.00 1 Haltekette safety chain chaîne de sécurité
20 0930.35.80.00 1 Drehspielkupplung coupling raccord de couplage
21 0930.20.14.00 1 Kreuzgarnitur cross a. bearing kit croisillon
22 0930.38.28.00 1 Kupplungsgehäuse clutch housing carter d'embrayage
23 0930.40.37.00 1 Federpaket spring pack bloc-ressort
24 0930.33.82.00 1 Nabe mit Nr.25 hub with no.25 moyeu avec no.25
25 0930.33.83.00 2 Buchse bush douille
26 0930.33.54.00 2 Sperrnocken locking cam came d'arrêt
27 0930.33.93.00 1 Klemmkonus clamping cone cone de contrainte
28 0910.76.88.00 1 Stützscheibe supporting ring rondelle pour bague de frein
29 0912.16.15.00 1 Sicherungsring circlip circlip
30 0930.37.12.00 1 Dichtring sealing washer joint thorique
31 0930.49.03.00 1 Haltekette safety chain chaîne de sécurité
z für Maschinen ohne Schneidwerk for engines without cutting device pour maschine sans dispositif de coupe
D 05
04.09
9 16
7 11
6
8 15
7
6
30
5 29
28
4
14 27
3 19
WELGER RP 405 / RP 435
2 1
22
21
13
20
10 23 24 25 26
18
31
17
12
D 10
1758-013
GELENKWELLE / FREILAUF WALTERSCHEID
DRIVE SHAFT / FREE WHEEL MECHANISM WALTERSCHEID
04.09
1-31 0930.13.40.00 1 z Gelenkwelle, kpl. drive shaft, cpl. arbre articulé, cpl. 1800 Nm; 1 3/8" 6Z//1 3/8" 6Z
1 0930.45.50.00 1 Schutztrichter guard cone cône protecteur
2 0930.41.39.00 6 Schraube screw vis
3 0930.50.44.00 1 Gleitring bearing ring anneau de glissement
4 0930.41.52.00 1 Verschluss lock fermeture
5 0930.23.12.00 1 Gabel yoke fourche
6 0930.20.22.00 2 Kreuzgarnitur mit Nr.7 cross a. bearing kit with no.7 croisillon avec no.7
7 0930.28.09.00 8 Ronde washer rondelle
8 0930.22.61.00 1 Doppelgabel flange yoke double forche
9 0930.26.73.00 1 Rillengabel inboard yoke mâchoire à gorge
WELGER RP 405 / RP 435
10 0930.53.89.00 1 Schutzhälfte mit Nr.11, 12 guard half with no.11, 12 demi protecteur avec no.11, 12
11 0930.45.51.00 1 Schutztrichter guard cone cône protecteur
12 0930.50.40.00 1 Gleitring bearing ring anneau de glissement
13 0930.42.80.00 1 Profilrohr profile tube tube profil
14 0930.42.79.00 1 Profilrohr profile tube tube profil
15-19 0930.53.48.00 1 Schutzhälfte guard half demi protecteur
15 0930.53.48.00 1 Schutzhälfte guard half demi protecteur
16 0930.50.40.00 1 Gleitring bearing ring anneau de glissement
17 0930.32.62.00 1 Stützring reinforcing collar bague de renfort
18 0930.45.53.00 1 Schutztrichter guard cone cône protecteur
19 0930.49.02.00 1 Haltekette safety chain chaîne de sécurité
20 0930.35.80.00 1 Drehspielkupplung coupling raccord de couplage
21 0930.20.14.00 1 Kreuzgarnitur cross a. bearing kit croisillon
22 0930.38.28.00 1 Kupplungsgehäuse clutch housing carter d'embrayage
23 0930.40.36.00 1 Federpaket spring pack bloc-ressort
24 0930.33.82.00 1 Nabe mit Nr.25 hub with no.25 moyeu avec no.25
25 0930.33.83.00 2 Buchse bush douille
26 0930.33.54.00 2 Sperrnocken locking cam came d'arrêt
27 0930.33.93.00 1 Klemmkonus clamping cone cone de contrainte
28 0910.76.88.00 1 Stützscheibe supporting ring rondelle pour bague de frein
29 0912.16.15.00 1 Sicherungsring circlip circlip
30 0930.37.12.00 1 Dichtring sealing washer joint thorique
31 0930.49.03.00 1 Haltekette safety chain chaîne de sécurité
9 16
7 11
6
8 15
7
6
30
5 29
28
4
14 27
3 19
WELGER RP 405 / RP 435
2 1
22
21
13
20
10 23 24 25 26
18
31
17
12
D 15
1758-013
GELENKWELLE / FREILAUF WALTERSCHEID
DRIVE SHAFT / FREE WHEEL MECHANISM WALTERSCHEID
04.09
1-31 0930.13.41.00 1 z Gelenkwelle, kpl. drive shaft, cpl. arbre articulé, cpl. 1950 Nm; 1 3/8" 6Z//1 3/8" 6Z
1 0930.45.50.00 1 Schutztrichter guard cone cône protecteur
2 0930.41.39.00 6 Schraube screw vis
3 0930.50.44.00 1 Gleitring bearing ring anneau de glissement
4 0930.41.52.00 1 Verschluss lock fermeture
5 0930.23.12.00 1 Gabel yoke fourche
6 0930.20.22.00 2 Kreuzgarnitur mit Nr.7 cross a. bearing kit with no.7 croisillon avec no.7
7 0930.28.09.00 8 Ronde washer rondelle
8 0930.22.61.00 1 Doppelgabel flange yoke double forche
9 0930.26.73.00 1 Rillengabel inboard yoke mâchoire à gorge
WELGER RP 405 / RP 435
10 0930.53.89.00 1 Schutzhälfte mit Nr.11, 12 guard half with no.11, 12 demi protecteur avec no.11, 12
11 0930.45.51.00 1 Schutztrichter guard cone cône protecteur
12 0930.50.40.00 1 Gleitring bearing ring anneau de glissement
13 0930.42.80.00 1 Profilrohr profile tube tube profil
14 0930.42.79.00 1 Profilrohr profile tube tube profil
15-19 0930.53.48.00 1 Schutzhälfte guard half demi protecteur
15 0930.53.48.00 1 Schutzhälfte guard half demi protecteur
16 0930.50.40.00 1 Gleitring bearing ring anneau de glissement
17 0930.32.62.00 1 Stützring reinforcing collar bague de renfort
18 0930.45.53.00 1 Schutztrichter guard cone cône protecteur
19 0930.49.02.00 1 Haltekette safety chain chaîne de sécurité
20 0930.35.80.00 1 Drehspielkupplung coupling raccord de couplage
21 0930.20.14.00 1 Kreuzgarnitur cross a. bearing kit croisillon
22 0930.38.28.00 1 Kupplungsgehäuse clutch housing carter d'embrayage
23 0930.40.38.00 1 Federpaket spring pack bloc-ressort
24 0930.33.82.00 1 Nabe mit Nr.25 hub with no.25 moyeu avec no.25
25 0930.33.83.00 2 Buchse bush douille
26 0930.33.54.00 2 Sperrnocken locking cam came d'arrêt
27 0930.33.93.00 1 Klemmkonus clamping cone cone de contrainte
28 0910.76.88.00 1 Stützscheibe supporting ring rondelle pour bague de frein
29 0912.16.15.00 1 Sicherungsring circlip circlip
30 0930.37.12.00 1 Dichtring sealing washer joint thorique
31 0930.49.03.00 1 Haltekette safety chain chaîne de sécurité
9 16
7 11
6
8 15
7
6
30
5 29
28
4
14 27
3 19
WELGER RP 405 / RP 435
2 1
22
21
13
20
10 23 24 25 26
18
31
17
12
D 20
1758-013
GELENKWELLE / FREILAUF WALTERSCHEID
DRIVE SHAFT / FREE WHEEL MECHANISM WALTERSCHEID
04.09
1-31 0930.13.42.00 1 z Gelenkwelle, kpl. drive shaft, cpl. arbre articulé, cpl. 1950 Nm; 1 3/8" 6Z//8x32x38
1 0930.45.50.00 1 Schutztrichter guard cone cône protecteur
2 0930.41.39.00 6 Schraube screw vis
3 0930.50.44.00 1 Gleitring bearing ring anneau de glissement
4 0930.41.53.00 1 Verschluss lock fermeture
5 0930.23.13.00 1 Gabel yoke fourche
6 0930.20.22.00 2 Kreuzgarnitur mit Nr.7 cross a. bearing kit with no.7 croisillon avec no.7
7 0930.28.09.00 8 Ronde washer rondelle
8 0930.22.61.00 1 Doppelgabel flange yoke double forche
9 0930.26.73.00 1 Rillengabel inboard yoke mâchoire à gorge
WELGER RP 405 / RP 435
10 0930.53.89.00 1 Schutzhälfte mit Nr.11, 12 guard half with no.11, 12 demi protecteur avec no.11, 12
11 0930.45.51.00 1 Schutztrichter guard cone cône protecteur
12 0930.50.40.00 1 Gleitring bearing ring anneau de glissement
13 0930.42.80.00 1 Profilrohr profile tube tube profil
14 0930.42.79.00 1 Profilrohr profile tube tube profil
15-19 0930.53.48.00 1 Schutzhälfte guard half demi protecteur
15 0930.53.48.00 1 Schutzhälfte guard half demi protecteur
16 0930.50.40.00 1 Gleitring bearing ring anneau de glissement
17 0930.32.62.00 1 Stützring reinforcing collar bague de renfort
18 0930.45.53.00 1 Schutztrichter guard cone cône protecteur
19 0930.49.02.00 1 Haltekette safety chain chaîne de sécurité
20 0930.35.80.00 1 Drehspielkupplung coupling raccord de couplage
21 0930.20.14.00 1 Kreuzgarnitur cross a. bearing kit croisillon
22 0930.38.28.00 1 Kupplungsgehäuse clutch housing carter d'embrayage
23 0930.40.38.00 1 Federpaket spring pack bloc-ressort
24 0930.33.82.00 1 Nabe mit Nr.25 hub with no.25 moyeu avec no.25
25 0930.33.83.00 2 Buchse bush douille
26 0930.33.54.00 2 Sperrnocken locking cam came d'arrêt
27 0930.33.93.00 1 Klemmkonus clamping cone cone de contrainte
28 0910.76.88.00 1 Stützscheibe supporting ring rondelle pour bague de frein
29 0912.16.15.00 1 Sicherungsring circlip circlip
30 0930.37.12.00 1 Dichtring sealing washer joint thorique
31 0930.49.03.00 1 Haltekette safety chain chaîne de sécurité
9 16
7 11
6
8 15
7
6
30
5 29
28
4
14 27
3 19
WELGER RP 405 / RP 435
2 1
22
21
13
20
10 23 24 25 26
18
31
17
12
D 25
1758-013
GELENKWELLE / FREILAUF WALTERSCHEID
DRIVE SHAFT / FREE WHEEL MECHANISM WALTERSCHEID
04.09
1-31 0930.13.43.00 1 z Gelenkwelle, kpl. drive shaft, cpl. arbre articulé, cpl. 1650 Nm; 1 3/8" 6Z//8x32x38
1 0930.45.50.00 1 Schutztrichter guard cone cône protecteur
2 0930.41.39.00 6 Schraube screw vis
3 0930.50.44.00 1 Gleitring bearing ring anneau de glissement
4 0930.41.53.00 1 Verschluss lock fermeture
5 0930.23.13.00 1 Gabel yoke fourche
6 0930.20.22.00 2 Kreuzgarnitur mit Nr.7 cross a. bearing kit with no.7 croisillon avec no.7
7 0930.28.09.00 8 Ronde washer rondelle
8 0930.22.61.00 1 Doppelgabel flange yoke double forche
9 0930.26.73.00 1 Rillengabel inboard yoke mâchoire à gorge
WELGER RP 405 / RP 435
10 0930.53.89.00 1 Schutzhälfte mit Nr.11, 12 guard half with no.11, 12 demi protecteur avec no.11, 12
11 0930.45.51.00 1 Schutztrichter guard cone cône protecteur
12 0930.50.40.00 1 Gleitring bearing ring anneau de glissement
13 0930.42.80.00 1 Profilrohr profile tube tube profil
14 0930.42.79.00 1 Profilrohr profile tube tube profil
15-19 0930.53.48.00 1 Schutzhälfte guard half demi protecteur
15 0930.53.48.00 1 Schutzhälfte guard half demi protecteur
16 0930.50.40.00 1 Gleitring bearing ring anneau de glissement
17 0930.32.62.00 1 Stützring reinforcing collar bague de renfort
18 0930.45.53.00 1 Schutztrichter guard cone cône protecteur
19 0930.49.02.00 1 Haltekette safety chain chaîne de sécurité
20 0930.35.80.00 1 Drehspielkupplung coupling raccord de couplage
21 0930.20.14.00 1 Kreuzgarnitur cross a. bearing kit croisillon
22 0930.38.28.00 1 Kupplungsgehäuse clutch housing carter d'embrayage
23 0930.40.37.00 1 Federpaket spring pack bloc-ressort
24 0930.33.82.00 1 Nabe mit Nr.25 hub with no.25 moyeu avec no.25
25 0930.33.83.00 2 Buchse bush douille
26 0930.33.54.00 2 Sperrnocken locking cam came d'arrêt
27 0930.33.93.00 1 Klemmkonus clamping cone cone de contrainte
28 0910.76.88.00 1 Stützscheibe supporting ring rondelle pour bague de frein
29 0912.16.15.00 1 Sicherungsring circlip circlip
30 0930.37.12.00 1 Dichtring sealing washer joint thorique
31 0930.49.03.00 1 Haltekette safety chain chaîne de sécurité
z für Maschinen ohne Schneidwerk for engines without cutting device pour maschine sans dispositif de coupe
D 25
04.09
9 16
7 11
6
8 15
7
6
30
5 29
28
4
14 27
3 19
WELGER RP 405 / RP 435
2 1
22
21
13
20
10 23 24 25 26
18
31
17
12
D 30
1758-013
GELENKWELLE / FREILAUF WALTERSCHEID
DRIVE SHAFT / FREE WHEEL MECHANISM WALTERSCHEID
04.09
1-31 0930.13.44.00 1 z Gelenkwelle, kpl. drive shaft, cpl. arbre articulé, cpl. 1800 Nm; 1 3/8" 6Z//8x32x38
1 0930.45.50.00 1 Schutztrichter guard cone cône protecteur
2 0930.41.39.00 6 Schraube screw vis
3 0930.50.44.00 1 Gleitring bearing ring anneau de glissement
4 0930.41.53.00 1 Verschluss lock fermeture
5 0930.23.13.00 1 Gabel yoke fourche
6 0930.20.22.00 2 Kreuzgarnitur mit Nr.7 cross a. bearing kit with no.7 croisillon avec no.7
7 0930.28.09.00 8 Ronde washer rondelle
8 0930.22.61.00 1 Doppelgabel flange yoke double forche
9 0930.26.73.00 1 Rillengabel inboard yoke mâchoire à gorge
WELGER RP 405 / RP 435
10 0930.53.89.00 1 Schutzhälfte mit Nr.11, 12 guard half with no.11, 12 demi protecteur avec no.11, 12
11 0930.45.51.00 1 Schutztrichter guard cone cône protecteur
12 0930.50.40.00 1 Gleitring bearing ring anneau de glissement
13 0930.42.80.00 1 Profilrohr profile tube tube profil
14 0930.42.79.00 1 Profilrohr profile tube tube profil
15-19 0930.53.48.00 1 Schutzhälfte guard half demi protecteur
15 0930.53.48.00 1 Schutzhälfte guard half demi protecteur
16 0930.50.40.00 1 Gleitring bearing ring anneau de glissement
17 0930.32.62.00 1 Stützring reinforcing collar bague de renfort
18 0930.45.53.00 1 Schutztrichter guard cone cône protecteur
19 0930.49.02.00 1 Haltekette safety chain chaîne de sécurité
20 0930.35.80.00 1 Drehspielkupplung coupling raccord de couplage
21 0930.20.14.00 1 Kreuzgarnitur cross a. bearing kit croisillon
22 0930.38.28.00 1 Kupplungsgehäuse clutch housing carter d'embrayage
23 0930.40.36.00 1 Federpaket spring pack bloc-ressort
24 0930.33.82.00 1 Nabe mit Nr.25 hub with no.25 moyeu avec no.25
25 0930.33.83.00 2 Buchse bush douille
26 0930.33.54.00 2 Sperrnocken locking cam came d'arrêt
27 0930.33.93.00 1 Klemmkonus clamping cone cone de contrainte
28 0910.76.88.00 1 Stützscheibe supporting ring rondelle pour bague de frein
29 0912.16.15.00 1 Sicherungsring circlip circlip
30 0930.37.12.00 1 Dichtring sealing washer joint thorique
31 0930.49.03.00 1 Haltekette safety chain chaîne de sécurité
9
3
14
2
8
4
12
2
7
1
6
13
1729 -218
04.09 WELGER RP 405 / RP 435 D 35
WEITWINKEL-GLEICHLAUF-GELENKWELLE MIT SCHUTZ BONDIOLI & PAVESI
WIDE ANGLE CV PTO DRIVE SHAFT WITH GUARD BONDIOLI & PAVESI
04.09
1-14 0930.80.45.00 1 z Gelenkwelle, kpl. drive shaft, cpl. transmission, cpl. 1700 Nm; 1 3/8" 6Z//1 3/8" 6Z
1 0930.85.40.00 1 Aussengabel outer yoke fourche exterieur
2 0930.85.41.00 2 Kreuzgarnitur cross a. bearing kit croisillon
3 0930.85.42.00 1 Innengabel inner yoke fourche intérieure
4 0930.85.43.00 1 Zentralteil centerpiece partie central
5 0930.85.44.00 1 Aussenrohr outer tube tube extérieure
6 0930.85.45.00 1 Innenrohr inner tube tube intérieure
7 0930.85.20.00 1 Innengabel inner yoke fourche intérieure
8-11 0930.85.47.00 1 Nockenschaltkupplung kpl. cam-type cut out clutch, cpl. embrayage à came, cpl.
8 0930.85.50.00 1 Gehäuse housing flasques
WELGER RP 405 / RP 435
z für Maschinen ohne Schneidwerk for engines without cutting device pour maschine sans dispositif de coupe
D 35
10
11
5
9
3
14
2
8
4
12
2
7
1
6
13
1729 -218
04.09 WELGER RP 405 / RP 435 D 40
WEITWINKEL-GLEICHLAUF-GELENKWELLE MIT SCHUTZ BONDIOLI & PAVESI
WIDE ANGLE CV PTO DRIVE SHAFT WITH GUARD BONDIOLI & PAVESI
04.09
1-14 0930.80.46.00 1 z Gelenkwelle, kpl. drive shaft, cpl. transmission, cpl. 1850 Nm; 1 3/8" 6Z//1 3/8" 6Z
1 0930.85.40.00 1 Aussengabel outer yoke fourche exterieur
2 0930.85.41.00 2 Kreuzgarnitur cross a. bearing kit croisillon
3 0930.85.42.00 1 Innengabel inner yoke fourche intérieure
4 0930.85.43.00 1 Zentralteil centerpiece partie central
5 0930.85.44.00 1 Aussenrohr outer tube tube extérieure
6 0930.85.45.00 1 Innenrohr inner tube tube intérieure
7 0930.85.20.00 1 Innengabel inner yoke fourche intérieure
8-11 0930.85.22.00 1 Nockenschaltkupplung kpl. cam-type cut out clutch, cpl. embrayage à came, cpl.
8 0930.85.30.00 1 Gehäuse housing flasques
WELGER RP 405 / RP 435
9
3
14
2
8
4
12
2
7
1
6
13
1729 -218
04.09 WELGER RP 405 / RP 435 D 45
WEITWINKEL-GLEICHLAUF-GELENKWELLE MIT SCHUTZ BONDIOLI & PAVESI
WIDE ANGLE CV PTO DRIVE SHAFT WITH GUARD BONDIOLI & PAVESI
04.09
1-14 0930.80.47.00 1 z Gelenkwelle, kpl. drive shaft, cpl. transmission, cpl. 1950 Nm; 1 3/8" 6Z//1 3/8" 6Z
1 0930.85.40.00 1 Aussengabel outer yoke fourche exterieur
2 0930.85.41.00 2 Kreuzgarnitur cross a. bearing kit croisillon
3 0930.85.42.00 1 Innengabel inner yoke fourche intérieure
4 0930.85.43.00 1 Zentralteil centerpiece partie central
5 0930.85.44.00 1 Aussenrohr outer tube tube extérieure
6 0930.85.45.00 1 Innenrohr inner tube tube intérieure
7 0930.85.20.00 1 Innengabel inner yoke fourche intérieure
8-11 0930.85.46.00 1 Nockenschaltkupplung kpl. cam-type cut out clutch, cpl. embrayage à came, cpl.
8 0930.85.50.00 1 Gehäuse housing flasques
WELGER RP 405 / RP 435
9
3
14
2
8
4
12
2
7
1
6
13
1729 -218
04.09 WELGER RP 405 / RP 435 D 50
WEITWINKEL-GLEICHLAUF-GELENKWELLE MIT SCHUTZ BONDIOLI & PAVESI
WIDE ANGLE CV PTO DRIVE SHAFT WITH GUARD BONDIOLI & PAVESI
04.09
1-14 0930.80.49.00 1 z Gelenkwelle, kpl. drive shaft, cpl. transmission, cpl. 1850 Nm; 1 3/8" 6Z//8x32x38x6D9
1 0930.85.82.00 1 Aussengabel outer yoke fourche exterieur
2 0930.85.41.00 2 Kreuzgarnitur cross a. bearing kit croisillon
3 0930.85.42.00 1 Innengabel inner yoke fourche intérieure
4 0930.85.43.00 1 Zentralteil centerpiece partie central
5 0930.85.44.00 1 Aussenrohr outer tube tube extérieure
6 0930.85.45.00 1 Innenrohr inner tube tube intérieure
7 0930.85.20.00 1 Innengabel inner yoke fourche intérieure
8-11 0930.85.22.00 1 Nockenschaltkupplung kpl. cam-type cut out clutch, cpl. embrayage à came, cpl.
8 0930.85.30.00 1 Gehäuse housing flasques
WELGER RP 405 / RP 435
7 19
14
18
3
6 15
5
13
12
WELGER RP 405 / RP 435
4 11
3
2 10
17 16
1
9
D 55
1758-012
GELENKWELLE Comer RP 405
DRIVE SHAFT Comer RP 405
04.09
1-19 0930.13.45.00 1 Gelenkwelle, kpl. drive shaft, cpl. arbre articulé, cpl. 1700 Nm; 1 3/8" 6Z//1 3/8" 6Z
1 0930.84.74.00 1 Schutztopf cone guard cône de protection
2 0930.84.72.00 1 Aussengabel outer yoke fourche exterieur
0930.84.61.00 1 Kugel ball bille
3 0930.84.03.00 2 Kreuzgarnitur cross a. bearing kit croisillon
4 0930.84.73.00 1 Weitwinkelgelenk wide angle joint articulation a grand angle
5 0930.84.05.00 1 Aussengabel outer yoke fourche exterieur
6 0930.84.06.00 1 Spannstift spring type straight pin goupille de serrage
7 0930.84.07.00 1 Profilrohr profile tube tube profil
8 0930.84.75.00 1 Schutzhälfte, außen outer guard half demi protecteur exterieur
WELGER RP 405 / RP 435
21
7 20
19
18
3 16
14
6 13
5
11
WELGER RP 405 / RP 435
3 10
2
1 12 14-27
27
16
15
9
26
25
24
22 17
23
D 60
1758-124
GELENKWELLE Comer RP 405
DRIVE SHAFT Comer RP 405
04.09
1-19 0930.13.46.00 1 Gelenkwelle, kpl. drive shaft, cpl. arbre articulé, cpl. 1700 Nm; 1 3/8" 6Z//1 3/8" 6Z
1 0930.84.74.00 1 Schutztopf cone guard cône de protection
2 0930.84.72.00 1 Aussengabel outer yoke fourche exterieur
0930.84.61.00 1 Kugel ball bille
3 0930.84.03.00 2 Kreuzgarnitur cross a. bearing kit croisillon
4 0930.84.73.00 1 Weitwinkelgelenk wide angle joint articulation a grand angle
5 0930.84.05.00 1 Aussengabel outer yoke fourche exterieur
6 0930.84.06.00 1 Spannstift spring type straight pin goupille de serrage
7 0930.84.07.00 1 Profilrohr profile tube tube profil
8 0930.84.75.00 1 Schutzhälfte, außen outer guard half demi protecteur exterieur
WELGER RP 405 / RP 435
25
2
19
22
30 12
6
24
26
WELGER RP 405 / RP 435
27
24
6
4 11
23
20
6 3
14 25
21
13
17
18
28 27 1
31 5 7
9
15
D 65
1724-022
GETRIEBE VV-VERSION
GEAR BOX VV-VERSION
04.09
25
2
19
22
30 12
6
24
26
WELGER RP 405 / RP 435
27
24
6
4 11
23
20
6 3
14 25
21
13
17
18
28 27 1
31 5 7
9
15
D 66
1724-022
GETRIEBE VV-VERSION
GEAR BOX VV-VERSION
04.09
34 33
32
28
35 Variante Silage
27 Silage Variant
26 16 Variante Silotage
39
14
13
29
41
WELGER RP 405 / RP 435
30
24
31 37 38
12 15 25
36
10
40 23
11
23
6 21
18 18
19 17 19 17
25
2 8
3 24
E 10
1 4 5
1752-023
ÜBERTRAGUNGSTEILE
TRANSMISSION PARTS
04.09
ENTRAINEMENT
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
7* 0934.65.10.00 1 Splintverschlußglied connecting link by split pin raccord avec goupille fendue S-20B-1
0934.60.51.00 1 Gekröpftes Doppelglied cranked double link double maillon coudé C-20B-1
8 0934.18.19.00 1 Rollenkette roller chain chaîne à rouleaux 16B-1x71 L+S
9* 0934.65.07.00 1 Splintverschlußglied connecting link by split pin raccord avec goupille fendue S-16B-1
10-12 1729.25.19.02 1 Spannhebel, rechts, kpl. gripping lever, right, cpl. levier tension, droite, cpl.
10 1729.25.19.36 1 Hebel rechts lever, right levier, droite
11 0920.70.24.00 1 Laufbuchse sleeve douille
12 1721.25.04.09 1 Kettenspannrad kpl. chain tensioning sprocket pignon tendeur de chaîne 13 Z
13 0934.99.01.00 1 Spannklotz tensioning block bloc tendeur
14 0910.80.39.00 1 Scheibe washer rondelle Rd 35 ; lg.10
15 0910.60.13.00 1 Scheibe washer rondelle 13
16 0903.11.14.00 1 Flachrundschraube cup head bolt vis à tête ronde M 12x90
0907.10.12.00 1 6kt-Mutter hex.nut écrou hexagonal M 12
0911.10.12.00 1 Federring spring washer poulie à courroie A 12
17 0912.10.25.00 2 Sicherungsring circlip circlip 25x1,2
18 0910.76.24.00 4 Stützscheibe supporting ring rondelle pour bague de frein S25x35x2
19 0910.72.05.00 n.B. Passscheibe shim washer rondelle d'ajustage 25x35x1
0910.72.03.00 n.B. Passscheibe shim washer rondelle d'ajustage 25x35x0,3
20-22 1729.25.20.02 1 Spannhebel, links, kpl. gripping lever, left, cpl. levier tension, gauche, cpl.
20 1729.25.19.36 1 Hebel links lever, left levier, gauche
21 0920.70.24.00 1 Laufbuchse sleeve douille
22 0934.96.01.00 1 Kettenspannrad kpl. chain tensioning sprocket pignon tendeur de chaîne 15 Z
23 0940.29.87.00 2 Zugfeder tension spring ressort tendeur
24 0901.21.70.00 2 6kt-Schraube hex.bolt boulon à tête hex. M 12x200
25 0907.10.12.00 2 6kt-Mutter hex.nut écrou hexagonal M 12
26 1752.19.04.01 1 Riemenscheibe belt pulley poulie à courroie
27 0901.12.53.00 1 6kt-Schraube hex.bolt boulon à tête hex. M 16x140
E 10
optional
Fortsetzung E 11 continuation E 11 continuation E 11
04.09
34 33
32
28
35 Variante Silage
27 Silage Variant
26 16 Variante Silotage
39
14
13
29
41
WELGER RP 405 / RP 435
30
24
31 37 38
12 15 25
36
10
40 23
11
23
6 21
18 18
19 17 19 17
25
2 8
3 24
E 11
1 4 5
1752-023
ÜBERTRAGUNGSTEILE
TRANSMISSION PARTS
04.09
ENTRAINEMENT
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
¡ nur bei Garnbindung only for twine tying pour liage a ficelle
8
7 2
12 13 14 15
A
WELGER RP 405 / RP 435
13
11 10
6
2x
3x 2x
1x A 2x
E 20
1752-081
KETTENSCHMIERANLAGE
CHAIN LUBRICATION UNIT
04.09
GRAISSAGE DE CHAINE
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
13
12
7
13
15
11
15 8
WELGER RP 405 / RP 435
9
10
2 5
4
3 6
14
1
E 30
1742-186
KETTENSCHMIERANLAGE - PUMPE
04.09
1-11 0926.60.45.00 1 Pumpe kpl. mit Behälter pump cpl. with container pompe cpl. avec réservoir
1 0926.60.46.00 1 Pumpe ohne Behälter pump without container pompe sans réservoir
2 1753.26.01.08 1 Antriebbolzen bolt boulon
3 1753.26.01.09 1 Gummischlauch rubber tubing tuyau en caoutchouc
4 0954.67.03.00 2 Schlauchschelle clip collier S15/12 Sz W1
5 0925.24.70.00 1 O-Ring seal joint Ø 70x2
6 0926.60.67.00 12 Steckverschraubung screw joint raccord vissé Ø 4-G 1/8"
7 0926.60.68.00 1 Schraubdeckel cover covercle
8 0926.60.70.00 1 Sieb sieve tamis 0,4 mm
9 0925.24.91.00 1 O-Ring seal joint Ø 165x3
WELGER RP 405 / RP 435
4
1
2
3
5
1752-069
04.09 WELGER RP 405 / RP 435 E 35
WALZENSCHMIERUNG
ROLLER LUBRICATION
04.09
GRAISSAGE DE ROULEAU
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
für Sonderausrüstung - Doppelwalze for optional equipment - double roller pour équipement special - rouleau double
E 35
2
3
5
5
1
1755-155
04.09 WELGER RP 405 / RP 435 F 10
WERKZEUG UND ZUBEHÖR
TOOLS AND ACCESSORIES
04.09
OUTILLAGE ET ACCESSOIRE
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
32
33
40
38
9 39
10 20 19 18
22
11 7
22
13 8
12
21 21
WELGER RP 405 / RP 435
27 23 26 45 24
1 3 41 5 41
16
3 4 29
28
17 17
F 20
1755-156 14 15 25 43 42 44 35
BESCHRIFTUNG / LACKIERUNG / TECHNISCHE DOKUMENTATION
STICKERS / PAINTING / TECHNICAL DOCUMENTATION
04.09
1 0385.53.00.00 1 innovators in agriculture (rechts) innovators in agriculture (right) innovators in agriculture (droite)
2 0385.52.00.00 1 innovators in agriculture (links) innovators in agriculture (left) innovators in agriculture (gauche)
3 0385.48.00.00 3 LELY Ellipse LELY Ellipse LELY Ellipse
4 0385.74.00.00 1 www.lely.com www.lely.com www.lely.com
5 0385.58.00.00 1 LELY WELGER RP 405 Special LELY WELGER RP 405 Special LELY WELGER RP 405 Special
0385.51.00.00 1 LELY WELGER RP 435 LELY WELGER RP 435 LELY WELGER RP 435
0385.55.00.00 1 LELY WELGER RP 435 Master LELY WELGER RP 435 Master LELY WELGER RP 435 Master
0385.59.00.00 1 LELY WELGER RP 505 Special LELY WELGER RP 505 Special LELY WELGER RP 505 Special
0385.56.00.00 1 LELY WELGER RP 535 LELY WELGER RP 535 LELY WELGER RP 535
0385.57.00.00 1 LELY WELGER RP 535 Master LELY WELGER RP 535 Master LELY WELGER RP 535 Master
WELGER RP 405 / RP 435
32 0387.59.00.00 1 Skala für Ballendurchmesser scale for bale diameter échelle pour diamètre de balles
33 0387.60.00.00 1 Pfeil, rot zu Pos. 32 arrow, red for pos. 32 flèche, rouge pour pos.32
32
33
40
38
9 39
10 20 19 18
22
11 7
22
13 8
12
21 21
WELGER RP 405 / RP 435
27 23 26 45 24
1 3 41 5 41
16
3 4 29
28
17 17
F 21
1755-156 14 15 25 43 42 44 35
BESCHRIFTUNG / LACKIERUNG / TECHNISCHE DOKUMENTATION
STICKERS / PAINTING / TECHNICAL DOCUMENTATION
08.05
34* 1740.83.01.39 1 Markierungs-Satz set of decals for hydraulic jeu de décalcomaniés pour
35 0386.55.00.00 1 Deichselbefestigung drawbar fastening fixation de timon D8
36 0386.79.00.00 1 Garneinfädeln von den Rollen threading twine from the rolls enfilage ficelle dans la boîte
37 0386.96.00.00 1 Garneinfädeln threading twine enfilage ficelle
38 0387.40.00.00 1 Randabstand einstellen, rechts setting edge clearances, right régler les écarts de bord, droite
39 0387.41.00.00 1 Randabstand einstellen, links setting edge clearances, left régler les écarts de bord, gauche
40 0389.40.00.00 1 Netzeinlauf von der Rolle - net inserting from roll enfilage du filet
41 0390.84.00.00 2 Einstellskala focusing scale échelle de réglage
42 0387.31.00.00 1 Schloß "geschlossen" lock "closed" verrou "ferme"
43 0387.32.00.00 1 Schloß "offen" mit Pfeil lock "open" with arrow verrou "ouvert" avec flèche
WELGER RP 405 / RP 435
| größere Farbgebinde auf Anfrage bigger contance by order plus grande contenance sur demande
G30 UMLENKWALZE KURZ Ø 168 END ROLLER SHORT Ø 168 ROULEAU D'ENTRAIMENT COURT Ø 168
G32 UMLENKWALZE KURZ Ø 168 END ROLLER SHORT Ø 168 ROULEAU D'ENTRAIMENT COURT Ø 168
G34 UMLENKWALZE LANG Ø 168 END ROLLER LONG Ø 168 ROULEAU D'ENTRAIMENT LONG Ø 168
G 00
WALZENÜBERSICHT
ROLLERDIAGRAMM
08.05
G40 UMLENKWALZE LANG Ø 244,5 END ROLLER LONG Ø 244,5 ROULEAU D'ENTRAIMENT LONG 244,5
WELGER RP 405 / RP 435
8
9
4 14
3 13
2 5
15
19
18 1
17 6
WELGER RP 405 / RP 435
11
16
2
10
14
7
G 10
1752-082 12
22
HAUPTANTRIEBSWALZE
MAIN DRIVE ROLLER
04.09
11
9
8
6
7
WELGER RP 405 / RP 435
13 8
10
12
11
11 12
4
3
13
2
3
11
G 20
12 13
1752-024
DOPPELWALZE
DOUBLE ROLLER
08.05
ROULEAU DOUBLE
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
1-5 1752.15.01.01 1 Walze einbaufertig roller cpl. for mounting rouleau cpl. pour installation Ø 114,3
1 1752.15.01.02 1 Walze roller rouleau Ø 114,3
2 1752.15.01.07 1 Achse axle axe Rd 30; lg.1174
3 0922.12.71.00 2 Rillenkugellager ball bearing roulement 6309-2RS
4 1753.15.01.10 1 Dichtscheibe rechts sealing disc right flasque droit
5 1753.15.01.11 1 Dichtscheibe links sealing disc left flasque gauche
6-10 1752.15.02.01 1 Walze einbaufertig roller cpl. for mounting rouleau cpl. pour installation Ø 88.9
6 1752.15.02.02 1 Walze roller rouleau Ø 88,9
7 1752.15.01.07 1 Achse axle axe Rd 30; lg.1174
8 0922.12.69.00 2 Rillenkugellager ball bearing roulement 6307-2RS
WELGER RP 405 / RP 435
19
13
11
12a 18
12
16
14
WELGER RP 405 / RP 435
13
15
11
9 16
8
7 3 17
6 4 11
5
4 5 13
3 6 19
7
8
10
11
13
G 25
1752-066 1 2 12 12a
DOPPELWALZE (GUMMIERT) - SONDERAUSRÜSTUNG
DOUBLE ROLLER (RUBBERIZED) - OPTIONAL EQUIPMENT
08.05
1-10 1752.15.11.01 1 Walze einbaufertig roller cpl. for mounting rouleau cpl. pour installation
1 1752.15.11.02 1 Walze, gummiert roller, rubberized rouleau, gommée
2 1752.15.11.06 1 Achse axle axe
3 0925.14.36.00 2 Radial-Wellendichtring oil seal joint thorique BA 40x70x8
4 0912.15.70.00 2 Sicherungsring circlip circlip 70x2,5
5 0922.40.08.00 2 Pendelrollenlager self-aligning roller bearing roulement a rouleaux articulé 40x80x23
6 0925.14.38.00 2 Radial-Wellendichtring oil seal joint thorique BAU 45x85x10
7 0912.15.85.00 2 Sicherungsring circlip circlip 85x3
8 0922.78.27.00 2 Innenring inner washer bague intérieure IR 40x45x20
9 1752.15.11.17 1 Dichtscheibe rechts sealing disc right flasque droit
WELGER RP 405 / RP 435
1
3
8
4
5
7
6
1752-025
08.05 WELGER RP 405 / RP 435 G 30
UMLENKWALZE KURZ Ø 168
END ROLLER SHORT Ø 168
08.05
1
3
8
4
5
6
7
1752-026
08.05 WELGER RP 405 / RP 435 G 32
UMLENKWALZE KURZ Ø 168
END ROLLER SHORT Ø 168
08.05
1
3
5
4
6
7
1752-027
08.05 WELGER RP 405 / RP 435 G 34
UMLENKWALZE LANG Ø 168
END ROLLER LONG Ø 168
08.05
Walze X entfällt bei Silagekit, roller X not for silagekit, rouleaux X pas avec kit ensilage,
siehe Seite G 72 Sonderausrüstung see page G 72 optional equipment regardez page G 72 équipment special
G 34
9
2
3
7
4
5
6
1
4
3
9
8
1752-004
7
08.05 WELGER RP 405 / RP 435 G 40
UMLENKWALZE Ø 244,5
END ROLLER Ø 244,5
08.05
7
4
11
6
10
9
8
1
11
1752-005
08.05 WELGER RP 405 / RP 435 G 50
LEISTENWALZE
RIPPED ROLLER
08.05
ROULEAU À LATTE
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
6
1
WELGER RP 405 / RP 435
2
4
3
7
16
13
15
14
19
18
8
G 60
1752-028 17
ABROLLWALZE
ROLLERS
08.05
ROULEAUX
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
4
2
1
WELGER RP 405 / RP 435
5
2
6
4
7
8
9
4
16
17 10
18
19
12
20 11
21
G 70
1752-084
RIEMENANTRIEBSWALZE
BELT DRIVE ROLLER
04.09
1 1753.20.04.05 1 Walze kpl. beschichtet roller cpl. coated rouleau cpl. enduit
2 1724.14.02.14 2 Schutzscheibe seal bague d'entancheite
3 0922.12.95.00 1 Rillenkugellager ball bearing roulement 76210-2RS Ø 50
4 0925.33.70.00 3 Nilosring nilos ring bague nilos
5 1753.20.05.03 2 Dichtscheibe sealing disc flasque
6 0910.73.73.00 nB Passscheibe shim washer rondelle d'ajustage 50x62x1
7 1729.16.02.20 1 Lagerring bearing ring bague de roulement
8 0922.40.10.00 1 Pendelrollenlager self-aligning roller bearing roulement a rouleaux articulé 22210 E
9 0912.68.70.00 1 Doppelsicherungsring circlip circlip FK 7 DSB 93x5x1,98
10 1724.14.62.14 1 Schutzscheibe seal bague d'entancheite
WELGER RP 405 / RP 435
1752-040
04.09 WELGER RP 405 / RP 435 G 80
LAUFRIEMEN
FLAT BELT
04.09
COURROIE PLATE
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
2 5 3
7
8 4
6
WELGER RP 405 / RP 435
16 11 9
17
27
18 14
23 13
12
24 12
19 13
14
20
21 10
22 15
1
H 10
26
1755-144
GARNKASTEN ( NUR FÜR GARNBINDUNG )
TWINE BOX ( ONLY FOR TWINE WRAPPING )
04.09
2 5 3
7
8 4
6
WELGER RP 405 / RP 435
16 11 9
17
27
18 14
23 13
12
24 12
19 13
14
20
21 10
22 15
1
H 11
26
1755-144
GARNKASTEN ( NUR FÜR GARNBINDUNG )
TWINE BOX ( ONLY FOR TWINE WRAPPING )
04.09
18-24 1724.27.11.00 1 Garnbremse, kpl. twine tensinor, cpl. tendeur de ficelle, cpl.
18 1724.27.11.01 1 Grundplatte base plate plaque de base
19 1724.27.11.04 2 Bremsplatte brake plate plaque de frein
20 0940.10.71.00 2 Feder spring ressort
21 0910.40.06.00 2 Scheibe washer rondelle R6,6
22 0908.31.06.00 2 Flügelmutter wing nut écrou à oreilles M6
23 0361.08.00.00 2 Garnführungsöse twine eye oeillet
0910.80.90.00 2 Scheibe washer rondelle 20,5x26x2,5
0912.10.20.00 2 Sicherungsring circlip circlip 20x1,2
24 0903.10.17.00 1 Flachrundschraube cup head bolt vis à tête ronde M6x25
WELGER RP 405 / RP 435
14 21
7 16
8
20
3 5 18
15 17
4
17
18
WELGER RP 405 / RP 435
19
9 12
10
11
6
13
22
9 27 28
1 23
2
24
H 15
25
1755-145
26
GARNKASTEN ( NUR FÜR KOMBINATION GARN UND NETZBINDUNG )
TWINE BOX ( ONLY FOR COMBINATION TWINE AND NET WRAPPING )
04.09
14 21
7 16
8
20
3 5 18
15 17
4
17
18
WELGER RP 405 / RP 435
19
9 12
10
11
6
13
22
9 27 28
1 23
2
24
H 16
25
1755-145
26
GARNKASTEN ( NUR FÜR KOMBINATION GARN UND NETZBINDUNG )
TWINE BOX ( ONLY FOR COMBINATION TWINE AND NET WRAPPING )
04.09
22-28 1724.27.11.00 1 Garnbremse, kpl. twine tensinor, cpl. tendeur de ficelle, cpl.
22 1724.27.11.01 1 Grundplatte base plate plaque de base
23 1724.27.11.04 2 Bremsplatte brake plate plaque de frein
24 0940.10.71.00 2 Feder spring ressort
25 0910.40.06.00 2 Scheibe washer rondelle R6,6
26 0908.31.06.00 2 Flügelmutter wing nut écrou à oreilles M6
27 0361.08.00.00 2 Garnführungsöse twine eye oeillet
0910.80.90.00 2 Scheibe washer rondelle 20,5x26x2,5
0912.10.20.00 2 Sicherungsring circlip circlip 20x1,2
28 0903.10.17.00 1 Flachrundschraube cup head bolt vis à tête ronde M6x25
WELGER RP 405 / RP 435
1
3 3
11
10
9
WELGER RP 405 / RP 435
2
6
23
22
13 21 15
24
14
24
20
18
19
16
H 20
678 17
1741-130 27 25 26
GARNBINDETRÄGER / SCHNEIDVORRICHTUNG
WRAPPING FRAME / CUTTING UNIT
04.09
5
12
11
4
6
7
2
3
1
8
10
1755-146
04.09 WELGER RP 405 / RP 435 H 21
GARNBINDETRÄGER / SCHNEIDVORRICHTUNG ZUBEHÖR FÜR KOMBINATION GARN UND NETZBINDUNG
WRAPPING FRAME / CUTTING UNIT ACCESSORIES COMBINATION TWINE AND NET WRAPPING
04.09
SUPPORT DE LIAGE / DISPOSITIF COUPE FILET ACCESSORIES COMBINAISON LIAGE DE FICELLE ET LIAGE DE FILET
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
3
1
4
1752-061
04.09 WELGER RP 405 / RP 435 H 22
GARNBINDETRÄGER / SCHNEIDVORRICHTUNG ZUBEHÖR FÜR GARNBINDUNG
WRAPPING FRAME / CUTTING UNIT ACCESSORIES FOR TWINE WRAPPING
04.09
36 37 35
13
31 4
30 26
11
33 16 3
32
34
2
6
4
5
WELGER RP 405 / RP 435
6 27
7 23
17 28
38
24
39 7 18 19 25
40
22 21 8
9
10
8
10
23
27
14
29
18 19
H 25
15
1741-032
SCHLITTENANTRIEB
DRIVE
04.09
ENTRAINEMENT
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
36 37 35
13
31 4
30 26
11
33 16 3
32
34
2
6
4
5
WELGER RP 405 / RP 435
6 27
7 23
17 28
38
24
39 7 18 19 25
40
22 21 8
9
10
8
10
23
27
14
29
18 19
H 26
15
1741-032
SCHLITTENANTRIEB
DRIVE
04.09
ENTRAINEMENT
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
11
1 30
7 9
10
4 8
7
3
1
2
3
WELGER RP 405 / RP 435
12 28
11 19
29
22
18
25 27
5
13 26
21
15
14
20
19 16
14
17
16
21
H 30
1741-134 23 18
GARNEINWERFER
TWINE THROWER
04.09
LANCEUR DE FICELLE
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
1 1726.34.09.12 2 Rolle mit Nr. 2+3 roller with No. 2+3 rouleau avec No. 2+3
2 0930.99.04.00 2 Freilauf free wheel mechanism roue libre CSK 17-2 RS
3 0912.15.40.00 4 Sicherungsring circlip circlip 42x1.75
4 1724.34.15.05 1 Welle, Mitte shaft, inner arbre, interieur
5 1724.34.15.08 2 Welle, außen shaft, auter arbre, exterieur
6 0915.14.38.00 1 Zylinderstift cylindrical pin goupille cylindrique 6 m6x40
7 1724.34.15.11 2 Gewindestift stud vis pointeau M 10x30
8 1724.34.15.12 1 Kupplungsnabe clutch hub moyeu d'embrayage
9 1724.34.15.64 1 Mitnehmer carrier guide
10 0901.20.20.00 1 6kt-Schraube hex. bolt boulon à tête hex. M 4x12
WELGER RP 405 / RP 435
35
33 21 22
32
29
WELGER RP 405 / RP 435
20
34
25 19
30 9 18
8 27
7
3
36
37 40
10
40 28
35 12
38
13
24
23
17
16 11
6 15
27
5
4
6 14
1
H 50
2
1755-147 28
NETZBINDETRÄGER
NET WRAPPING FRAME
04.09
1 1729.37.01.01 1 Träger mit Nr. 2-8 frame with No. 2-8 support avec No 2-8
2 1729.37.01.10 1 Steuerhebel lever levier
3 1724.37.01.13 1 Welle shaft arbre
4 0925.38.24.00 1 Filzscheibe felt washer joint feutre
5 0910.71.34.00 2 Paßscheibe shim washer rondelle d'ajustage 17x24x1
6 0924.54.02.00 2 Freilauf free wheel mechanism roue libre KK17
7 0922.12.54.00 1 Rillenkugellager ball bearing roulement 6203-2RS
8 0912.10.15.00 1 Sicherungsring circlip circlip 15x1
9 1724.37.01.19 1 Rändelrad knurling wheel molette
10 0938.90.28.00 1 Verschlussstopfen plug bouchon
WELGER RP 405 / RP 435
35
33 21 22
32
29
WELGER RP 405 / RP 435
20
34
25 19
30 9 18
8 27
7
3
36
37 40
10
40 28
35 12
38
13
24
23
17
16 11
6 15
27
5
4
6 14
1
H 51
2
1755-147 28
NETZBINDETRÄGER
NET WRAPPING FRAME
04.09
10 12
29
28 27
WELGER RP 405 / RP 435
24
9 1
10
12 22
18 11 8
7
16
19
6 4
13 22 21
17
5
3
2 15 14 24 23
20 25
26
H 55
1741-103
SCHNEIDVORRICHTUNG MIT ABSTREIFERN
CUTTING DEVICE WITH STRIPPER
04.09
1-15 1724.37.03.01 1 Messerschwinge, kpl. knife beam, cpl.. balancier de couteau, cpl.
1 1724.37.03.02 1 Messerschwinge knife beam balancier de couteau
2 1721.39.03.11 1 Klemmleiste clamping bar barre de serrage
3 1721.39.03.12 1 Messer knife couteau
4 0901.20.49.00 19 6kt-Schraube hex. bolt boulon à tête hex. M 6x25
0911.10.06.00 19 Federring spring washer rondelle grower A6
5 1729.37.03.08 1 Segment segment segment
6 1712.37.02.72 1 Buchse bush douille
7 0910.64.06.00 1 Scheibe washer rondelle A 6.4
8 0907.60.06.00 1 Sicherungsmutter safety nut contre-écrou M6
WELGER RP 405 / RP 435
1
3
1755-150
4
04.09 WELGER RP 405 / RP 435 H 56
BEFESTIGUNG NETZBINDUNG ZUBEHÖR FÜR KOMBINATION GARN UND NETZBINDUNG
ATTACHING NET WRAPPING ACCESSORIES COMBINATION TWINE AND NET WRAPPING
04.09
ATTACHEMENT LIAGE PAR FILET ACCESSORIES COMBINAISON LIAGE DE FICELLE ET LIAGE DE FILET
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
Balercontrol E 41
1 38 53
39 55 51
52
54
47
WELGER RP 405 / RP 435
26
28 37
27 48 65
48
34
2 11
23 3 64 12
33 5 50
10 13
4
24 35 60 9
25 7
36 8
30
29 5 15
32 6
31 16
14
18
49 52 19
58 20
56 21
63
64
59
17 22
H 60
1755-148 62 61 57
NETZROLLENHALTER MIT BREMSE
NET ROLL SUSPENSION WITH BRAKE
04.09
Balercontrol E 41
1 38 53
39 55 51
52
54
47
WELGER RP 405 / RP 435
26
28 37
27 48 65
48
34
2 11
23 3 64 12
33 5 50
10 13
4
24 35 60 9
25 7
36 8
30
29 5 15
32 6
31 16
14
18
49 52 19
58 20
56 21
63
64
59
17 22
H 61
1755-148 62 61 57
NETZROLLENHALTER MIT BREMSE
NET ROLL SUSPENSION WITH BRAKE
04.09
9
4
5
1
7
3
2
2
1755-149
04.09 WELGER RP 405 / RP 435 H 62
VORRATSBEHÄLTER BINDEMITTEL UND MESSERHALTER
STOCK BIN FOR WRAPPING MATERIAL AND KNIFE GUIDE
04.09
3 7
9
WELGER RP 405 / RP 435
6 11
14
16 5 8
20
17
21
13
15 15
10
18
14
16
19
22
H 65
1758-122 23
ANTRIEB
DRIVE
04.09
ENTRAINEMENT
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
1-4 1721.39.04.01 1 Riemenscheibe, kpl. belt pulley, cpl. poulie à courroie, cpl.
1 1725.37.09.26 1 Riemenscheibe belt pulley poulie à courroie
2 0912.15.52.00 1 Sicherungsring circlip circlip
3 0924.54.04.00 1 Freilauf free wheel mechanism roue libre
4 1721.39.04.05 1 Nabe hub moyeu
4a* 0948.90.05.00 nB Kleber glue colle Loctite Nr. 601
5 1753.37.04.06 1 Reduzierstück reduction piece pièce de reduction
6 0904.67.59.00 1 Gewindestift stud vis pointeau M 10x50
7-10 1721.39.04.10 1 Riemenspanner, kpl. belt tensioner, cpl. tendeur de courroie, cpl.
7 0934.99.11.00 1 Spannelement tensioner tendeur
WELGER RP 405 / RP 435
14
13 11
17
WELGER RP 405 / RP 435
13
16
19
18
3
15
4
12
9
H 70
2 1
1729 -278
ELEKTRISCHE NETZLÄNGENVERSTELLUNG
ELECTRICAL NET LENGTH REGULATION
04.09
4
9 15
16 26
17 25 26
24
19 23 27
18
22 28
WELGER RP 405 / RP 435
21
20
22
18
19
9 30
11 32 30
1
2 5 8 31
12 10
3 14 30
4 8
7
30 29
13
J 10
1755-157 6 8
HYDRAULIK: HECKKLAPPE
HYDRAULIC: TAILGATE
04.09
7
4
5
1755-011
08.05 WELGER RP 405 / RP 435 J 15
HYDRAULIK: NETZBINDUNG
HYDRAULIC: NET UNIT
08.05
20
22
21
25
18 28
5
26
27
17
WELGER RP 405 / RP 435
18
15
16 13 B
14 6 13 4
9
2 12
A
8
B
17
3
11 26
10 2 27
6 1
7
J 20
6 19
1755-158
HYDRAULIK: RIEMENSPANNUNG
HYDRAULIC: BELT TENSION
04.09
24
33 A
13 21 22
20 25
29
26
18 32 5 30
31
17 27
WELGER RP 405 / RP 435
15
16 14 13
6
13 4
B
9
2
12
18
A
8 B
3 17
11
10 30
6 1 31
7
J 25
19
1755-159 28
HYDRAULIK: RIEMENSPANNUNG RP 435 MASTER
HYDRAULIC: BELT TENSION RP 435 MASTER
04.09
HYDRAULIQUE: RAMASSEUR LARGE AVEC TÔLE DE FOND NON-PLIABLES SANS DESPOSITIF DE COUPE BALER CONTROL "E"
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
10 0955.34.04.00 2 Einstellbare Winkelverschraubung elbow union, adjustable raccord coude, adjustable S - EWV 12 L
11 0955.38.13.00 1 Einstellbare L-Verschraubung adjustable male stud tee L- raccord, adjustable P -ELVD 12 L
12 1724.56.06.06 1 Rohrleitung links tubing left conduite hydrauliques gauche 12x1,5; lg. 570
1724.57.56.07 1 ¡ Rohrleitung links tubing left conduite hydrauliques gauche 12x1,5; lg. 530
13 0954.12.18.00 2 Höchstdruckschlauch high pressure hose flexible à haute pression 10x600
14 0955.12.23.00 2 Gerade Einschraubverschraubung male stud coupling raccord, adjustable CL12 / M 16x1,5
15 1724.56.06.12 1 Rohrleitung rechts tubing right conduite hydrauliques droit 12x1,5; lg. 2475
16 0954.60.65.00 5 Doppelschelle double clamp collier double BSS 2x12x25x3
17 0901.20.71.00 5 6kt-Schraube hex.bolt boulon à tête hex. M 8x35
0911.10.08.00 5 Federring spring washer rondelle grower A8
18 1724.56.17.07 5 Distanzstück spacer entretoise
19 0951.11.12.00 2 Plungerzylinder plunger cylinder verin
20 1713.53.08.02 2 Klemmstück clamping piece cosse machoires
21 0902.10.60.00 4 Zylinderschraube alan head bolt visà tête cylindrique M 10x30
22 1257.43.01.18 2 Druckteller pressure plate plateau de pression
23 0940.16.24.00 2 Druckfeder pressure spring ressort de pression
24 0901.12.08.00 4 Sechskantschraube hex.bolt boulon à tête hex. M 14x90
0910.10.15.00 4 Scheibe washer rondelle 15
0907.60.14.00 4 Sicherungsmutter safety nut contre écrou NM 14
25 0910.60.15.00 8 Scheibe washer rondelle 15
26 1724.56.47.09 2 Halter lever support
27 0901.20.66.00 4 6kt-Schraube hex.bolt boulon à tête hex. M 8x20
0911.10.08.00 4 Federring spring washer rondelle grower A8
J 30
20
16 23 21 22
15
WELGER RP 405 / RP 435
14
24
13
12 25
11
10 7
9
2 7
8
3
6
1
17 6
5 18
4
19
J 31
1755-160
HYDRAULIK: BREITAUFSAMMLER MIT FESTEM BODEN OHNE SCHNEIDWERK RP 405
HYDRAULIC: WIDE PICK-UP WITH FIXED BOTTOM PLATE WITHOUT CUTTING DEVICE RP 405
04.09
HYDRAULIQUE: RAMASSEUR LARGE AVEC TÔLE DE FOND NON-PLIABLES SANS DESPOSITIF DE COUPE RP 405
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
HYDRAULIQUE: RAMASSEUR LARGE AVEC FONT PIVOTANT SANS DISPOSITIF DE COUPE BALER CONTROL "E"
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
HYDRAULIQUE: RAMASSEUR LARGE AVEC FONT PIVOTANT SANS DISPOSITIF DE COUPE BALER CONTROL "E"
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
21
39
47 46 48 27 28 29 16
12
24 13
14 32
25 19 33
30 20 30
12 15 34
20
WELGER RP 405 / RP 435
12
26 13
12 20 36
14 19
38 41
20 49
30 35
30
12 12
19
22
13 7
23
12 2 7
11 3 17
10 6
1
9
8 18 6
5 19
4
20a
37
43
J 40
37
1755-038 18
HYDRAULIK: BREITAUFSAMMLER MIT FESTEM BODEN UND SCHNEIDWERK 17 MESSER ( GRUPPENSCHALTUNG ) BALER CONTROL "E"
HYDRAULIC: WIDE PICK-UP WITH FIXED BOTTOM PLATE AND CUTTING DEVICE 17 KNIFE ( 2 BLADE GROUPS ) BALER CONTROL "E"
08.05
HYDRAULIQUE: RAMASSEUR LARGE AVEC TÔLE DE FOND NON-PLIABLES ET DISPOSITIF DE COUPE 17 COUTEAU ( 2 GROUPES DE LAMES ) BALER CONTROL "E"
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
21
39
36 35
30
WELGER RP 405 / RP 435
40
47
49
46
48
50
17 7
17 2
7
3
17 1 6
5
6 18 19 4
20a
37
45
J 41
37
1755-039
18
HYDRAULIK: BREITAUFSAMMLER MIT FESTEM BODEN UND SCHNEIDWERK 17 MESSER ( GRUPPENSCHALTUNG ) BALER CONTROL "E"
HYDRAULIC: WIDE PICK-UP WITH FIXED BOTTOM PLATE AND CUTTING DEVICE 17 KNIFE ( 2 BLADE GROUPS ) BALER CONTROL "E"
08.05
HYDRAULIQUE: RAMASSEUR LARGE AVEC TÔLE DE FOND NON-PLIABLES ET DISPOSITIF DE COUPE 17 COUTEAU ( 2 GROUPES DE LAMES ) BALER CONTROL "E"
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
47 49
21 37 50
39
12 18
24 13
19
20 32
53 33
30
15 34
12 20
20
WELGER RP 405 / RP 435
14 13
12 25
46 37
38 20
12 30 35 36
14 30 30
41 19
26
12 7
19
13 20 22 23 2 7
3 17
12
11 1
10
9
18 6
6
5 19
8 4 20a
37
43
J 45
37
18
1755-040
HYDRAULIK: BREITAUFSAMMLER MIT HYDRAULISCHEM SCHWENKBODEN UND SCHNEIDWERK 17 MESSER ( GRUPPENSCHALTUNG ) BALER CONTROL "E"
HYDRAULIC: WIDE PICK-UP WITH HYDRAULIC BOTTOM FLAP AND CUTTING DEVICE 17 KNIFE ( 2 BLADE GROUPS ) BALER CONTROL "E"
08.05
HYDRAULIQUE: RAMASSEUR LARGE AVEC FONT PIVOTANT ET DISPOSITIF DE COUPE 17 COUTEAU ( 2 GROUPES DE LAMES ) BALER CONTROL "E"
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
21
18 37 36 35 39
30
WELGER RP 405 / RP 435
40
52
37 51 54
55
30 7
17
7 2
18 3
50 49 48 17 1 6
17
5
6 18 19 4
20a
37
45
J 46
37
1755-041 18
HYDRAULIK: BREITAUFSAMMLER MIT HYDRAULISCHEM SCHWENKBODEN UND SCHNEIDWERK 17 MESSER ( GRUPPENSCHALTUNG ) BALER CONTROL "E"
HYDRAULIC: WIDE PICK-UP WITH HYDRAULIC BOTTOM FLAP AND CUTTING DEVICE 17 KNIFE ( 2 BLADE GROUPS ) BALER CONTROL "E"
08.05
HYDRAULIQUE: RAMASSEUR LARGE AVEC FONT PIVOTANT ET DISPOSITIF DE COUPE 17 COUTEAU ( 2 GROUPES DE LAMES ) BALER CONTROL "E"
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
21
38
27 28 29 17 16
31
24
14
25 19 32
20 30
12 15 33
WELGER RP 405 / RP 435
20
26 20
41 40 42 35
14 19
17 20 37 43
34
12 30
12 19
22
13 7
23
12 2 7
11 3 17
10 6
1
9
8 18 6
5 19
4
20a
36
39
J 50
36
1755-042 18
HYDRAULIK: BREITAUFSAMMLER MIT FESTEM BODEN UND SCHNEIDWERK 13 MESSER (STANDARD) BALER CONTROL "E"
HYDRAULIC: WIDE PICK-UP WITH FIXED BOTTOM PLATE AND CUTTING DEVICE 13 KNIFE (STANDARD) BALER CONTROL "E"
08.05
HYDRAULIQUE: RAMASSEUR LARGE AVEC TÔLE DE FOND NON-PLIABLES ET DISPOSITIF DE COUPE 13 COUTEAU (STANDARD) BALER CONTROL "E"
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
21
41
42
WELGER RP 405 / RP 435
41
40 43
42
44
7
17 2
7
3
1 6
5
6 18 19 4
20a
J 51
1755-043
HYDRAULIK: BREITAUFSAMMLER MIT FESTEM BODEN UND SCHNEIDWERK 13 MESSER (STANDARD) BALER CONTROL "E"
HYDRAULIC: WIDE PICK-UP WITH FIXED BOTTOM PLATE AND CUTTING DEVICE 13 KNIFE (STANDARD) BALER CONTROL "E"
08.05
HYDRAULIQUE: RAMASSEUR LARGE AVEC TÔLE DE FOND NON-PLIABLES ET DISPOSITIF DE COUPE 13 COUTEAU (STANDARD) BALER CONTROL "E"
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
43 45
21 36 46
18
24
19
20
32
30
15 33
20
WELGER RP 405 / RP 435
20
14
47 25
42 36
20
12 30 34 35
14 30
37 19
26
12 7
19
13 20 22 23 2 7
3 17
12
11 1
10
9
6 18 6
5 19
8 4 20a
36
39
J 55
36
18
1755-044
HYDRAULIK: BREITAUFSAMMLER MIT HYDRAULISCHEM SCHWENKBODEN UND SCHNEIDWERK 13 MESSER (STANDARD) BALER CONTROL "E"
HYDRAULIC: WIDE PICK-UP WITH HYDRAULIC BOTTOM FLAP AND CUTTING DEVICE 13 KNIFE (STANDARD) BALER CONTROL "E"
08.05
HYDRAULIQUE: RAMASSEUR LARGE AVEC FONT PIVOTANT ET DISPOSITIF DE COUPE 13 COUTEAU (STANDARD) BALER CONTROL "E"
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
21
18 36
47
WELGER RP 405 / RP 435
49
48
36 47 50
51
17 7
7 2
18 3
17
46 45 44 1
17 6
5
6 18 19 4
20a
J 56
1755-045
HYDRAULIK: BREITAUFSAMMLER MIT HYDRAULISCHEM SCHWENKBODEN UND SCHNEIDWERK 13 MESSER (STANDARD) BALER CONTROL "E"
HYDRAULIC: WIDE PICK-UP WITH HYDRAULIC BOTTOM FLAP AND CUTTING DEVICE 13 KNIFE (STANDARD) BALER CONTROL "E"
08.05
HYDRAULIQUE: RAMASSEUR LARGE AVEC FONT PIVOTANT ET DISPOSITIF DE COUPE 13 COUTEAU (STANDARD) BALER CONTROL "E"
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
36
40
11 8
10
20 19 22 33
23 (5x)
B3
B1
18
B4
18
9 B5
16
WELGER RP 405 / RP 435
32
39 17
16
45 B4
50 51 16
B5 25 21
25 24 15
35 26 7 14
B3 B1 B1
25 13
7 2
32 28 15 27 3
44 25 1 12
38 6
44 29
6
31
31 42 5
53
43 4
30
30
30
47
31
37 32
J 60
25
1755-046 31 32
HYDRAULIK: BREITAUFSAMMLER MIT HYDRAULISCHEM SCHWENKBODEN UND SCHNEIDWERK 17/25 MESSER ( GRUPPENSCHALTUNG ) E-LINK
HYDRAULIC: WIDE PICK-UP WITH HYDRAULIC BOTTOM FLAP AND CUTTING DEVICE 17/25 KNIFE ( 2 BLADE GROUPS ) E-LINK
08.05
HYDRAULIQUE: RAMASSEUR LARGE AVEC FONT PIVOTANT ET DISPOSITIF DE COUPE 17/25 COUTEAU ( 2 GROUPES DE LAMES ) E-LINK
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
36
40
32
51 50
37 52 26
25
34
WELGER RP 405 / RP 435
53 32
54
48
7 28
15
47 48 49
2 7 25
3
31
1 25
41 6
6
5 42
4 43
32
31
J 61
32
31
1755-047
HYDRAULIK: BREITAUFSAMMLER MIT HYDRAULISCHEM SCHWENKBODEN UND SCHNEIDWERK 17/25 MESSER ( GRUPPENSCHALTUNG ) E-LINK
HYDRAULIC: WIDE PICK-UP WITH HYDRAULIC BOTTOM FLAP AND CUTTING DEVICE 17/25 KNIFE ( 2 BLADE GROUPS ) E-LINK
08.05
HYDRAULIQUE: RAMASSEUR LARGE AVEC FONT PIVOTANT ET DISPOSITIF DE COUPE 17/25 COUTEAU ( 2 GROUPES DE LAMES ) E-LINK
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
42 0955.34.04.00 2 Einstellbare Winkelverschraubung elbow union, adjustable raccord coude, adjustable S - EWV 12 L
43 0955.12.23.00 2 Gerade Einschraubverschraubung male stud coupling raccord, adjustable CL12 / M 16x1,5
44 1755.57.30.19 2 Rohrleitung tubing conduite hydrauliques 12x1,5
45 1755.57.31.04 1 Rohrleitung tubing conduite hydrauliques 12x1,5
46 1755.57.31.08 1 Rohrleitung tubing conduite hydrauliques 12x1,5
47 0951.11.66.00 2 Hydraulikzylinder hydraulic cylinder cylindre hydraulique
48 0910.10.21.00 10 Scheibe washer rondelle 21
49 0916.11.14.00 4 Splint split pin goupille fendue 5x40
50 0954.60.65.00 11 Doppelschelle double clamp collier double BSS 2 x 12 x 25 x 3
51 0901.20.71.00 11 Sechskantschraube hex.bolt boulon à tête hex. M 8 x 35
0911.10.08.00 11 Federring spring washer rondelle grower A8
52 1724.56.17.07 5 Distanzstück spacer entretoise
53 1724.56.47.09 2 Halter bracket support
54 0901.20.66.00 3 Sechskantschraube hex.bolt boulon à tête hex. M 8 x 20
0910.10.08.00 3 Federring spring washer rondelle grower A8
6
9
11
10
2
3
1729-286
08.05 WELGER RP 405 / RP 435 J 63
HYDRAULIK: STEUERBLOCK E-LINK
HYDRAULIC: CONTROL BLOCK E-LINK
08.05
36
40
11 8
10
20 19 22 33
23 (5x)
B3
B1
18
B4
18
9 B5
16
24
WELGER RP 405 / RP 435
32
39 17
16
45 B4
50 51 16
B5 25 21
25 15
35 7 14
B3
25 13
7 2
32 3
44 1 12
38 6
44 52
6
31
31 42 5
53
43 4
30
30
47
31
J 65
30
1755-075
HYDRAULIK: BREITAUFSAMMLER MIT HYDRAULISCHEM SCHWENKBODEN UND SCHNEIDWERK 13 MESSER ( STANDARD ) E-LINK
HYDRAULIC: WIDE PICK-UP WITH HYDRAULIC BOTTOM FLAP AND CUTTING DEVICE 13 KNIFE ( STANDARD ) E-LINK
08.05
HYDRAULIQUE: RAMASSEUR LARGE AVEC FONT PIVOTANT ET DISPOSITIF DE COUPE 13 COUTEAU ( STANDARD ) E-LINK
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
36
40
32
51 50
37 52 26
25
34
WELGER RP 405 / RP 435
53 32
54
48
7 28
15
47 48 49
2 7 25
3
31
1 25
41 6
6
5 42
4 43
32
31
J 66
32
31
1755-076
HYDRAULIK: BREITAUFSAMMLER MIT HYDRAULISCHEM SCHWENKBODEN UND SCHNEIDWERK 13 MESSER ( STANDARD ) E-LINK
HYDRAULIC: WIDE PICK-UP WITH HYDRAULIC BOTTOM FLAP AND CUTTING DEVICE 13 KNIFE ( STANDARD ) E-LINK
08.05
HYDRAULIQUE: RAMASSEUR LARGE AVEC FONT PIVOTANT ET DISPOSITIF DE COUPE 13 COUTEAU ( STANDARD ) E-LINK
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
42 0955.34.04.00 2 Einstellbare Winkelverschraubung elbow union, adjustable raccord coude, adjustable S - EWV 12 L
43 0955.12.23.00 2 Gerade Einschraubverschraubung male stud coupling raccord, adjustable CL12 / M 16x1,5
44 1755.57.30.19 2 Rohrleitung tubing conduite hydrauliques 12x1,5
45 1755.57.31.04 1 Rohrleitung tubing conduite hydrauliques 12x1,5
46 1755.57.31.08 1 Rohrleitung tubing conduite hydrauliques 12x1,5
47 0951.11.66.00 2 Hydraulikzylinder hydraulic cylinder cylindre hydraulique
48 0910.10.21.00 10 Scheibe washer rondelle 21
49 0916.11.14.00 4 Splint split pin goupille fendue 5x40
50 0954.60.65.00 11 Doppelschelle double clamp collier double BSS 2 x 12 x 25 x 3
51 0901.20.71.00 11 Sechskantschraube hex.bolt boulon à tête hex. M 8 x 35
0911.10.08.00 11 Federring spring washer rondelle grower A8
52 1724.56.17.07 7 Distanzstück spacer entretoise
53 1724.56.47.09 2 Halter bracket support
54 0901.20.66.00 3 Sechskantschraube hex.bolt boulon à tête hex. M 8 x 20
0910.10.08.00 3 Federring spring washer rondelle grower A8
36
40
11 8
10
20 19 22
23 (5x)
B3
B1
18
B4
18
9 B5
33 16
WELGER RP 405 / RP 435
32
39 17
16
45 16
B5
B4
25 52 50 51 21
25 15
35 7 14
B3
25 13
7 2
32 3
44 1 12
38 6
44
6
31
31 42 5
53
43 4
30
30
47
31
J 70
30
1755-077
HYDRAULIK: BREITAUFSAMMLER MIT HYDRAULISCHEM SCHWENKBODEN OHNE SCHNEIDWERK E-LINK
HYDRAULIC: WIDE PICK-UP WITH HYDRAULIC BOTTOM FLAP WITHOUT CUTTING DEVICE E-LINK
08.05
HYDRAULIQUE: RAMASSEUR LARGE AVEC FONT PIVOTANT SANS DESPOSITIF DE COUPE E-LINK
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
36 52
40
32
51 50
37 52
52
WELGER RP 405 / RP 435
53 32
54
48
7
47 48 49
2 7
3
31
1
30
41 6
6
5 42
4 43
J 71
1755-078
HYDRAULIK: BREITAUFSAMMLER MIT HYDRAULISCHEM SCHWENKBODEN OHNE SCHNEIDWERK E-LINK
HYDRAULIC: WIDE PICK-UP WITH HYDRAULIC BOTTOM FLAP WITHOUT CUTTING DEVICE E-LINK
08.05
HYDRAULIQUE: RAMASSEUR LARGE AVEC FONT PIVOTANT SANS DESPOSITIF DE COUPE E-LINK
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
42 0955.34.04.00 2 Einstellbare Winkelverschraubung elbow union, adjustable raccord coude, adjustable S - EWV 12 L
43 0955.12.23.00 2 Gerade Einschraubverschraubung male stud coupling raccord, adjustable CL12 / M 16x1,5
44 1755.57.30.19 2 Rohrleitung tubing conduite hydrauliques 12x1,5
45 1755.57.31.04 1 Rohrleitung tubing conduite hydrauliques 12x1,5
46 1755.57.31.08 1 Rohrleitung tubing conduite hydrauliques 12x1,5
47 0951.11.66.00 2 Hydraulikzylinder hydraulic cylinder cylindre hydraulique
48 0910.10.21.00 10 Scheibe washer rondelle 21
49 0916.11.14.00 4 Splint split pin goupille fendue 5x40
50 0954.60.65.00 11 Doppelschelle double clamp collier double BSS 2 x 12 x 25 x 3
51 0901.20.71.00 11 Sechskantschraube hex.bolt boulon à tête hex. M 8 x 35
0911.10.08.00 11 Federring spring washer rondelle grower A8
52 1724.56.17.07 5 Distanzstück spacer entretoise
53 1724.56.47.09 2 Halter bracket support
54 0901.20.66.00 3 Sechskantschraube hex.bolt boulon à tête hex. M 8 x 20
0910.10.08.00 3 Federring spring washer rondelle grower A8
37
18 11
10
12 8
39 32
35
33
32 32 17
36 1 9
16
19 20 4
3
WELGER RP 405 / RP 435
5
21 3 3 2
13
21
6
22 15
14
36 7
24
28 26 25
27 31
29
30
24
J 75
23
1755-161
ELEKTRIK BALER CONTROL E
ELEKTRONIC BALER CONTROL E
04.09
1 1755.61.03.00 1 Kabelbaum kpl. loom of wires o. cables kpl. harnais de câbles cpl. BC-E
2 0971.30.91.00 1 Platine-Verteilerkasten printed circuit board distribution bo platine boite de distributeur
3 0972.38.06.00 3 Steckerteil plug fiche 4-polig
4 0972.38.07.00 1 Steckerteil plug fiche 5-polig
5 0972.38.08.00 1 Steckerteil plug fiche 6-polig
6 0902.24.31.00 4 Zylinderschraube alan head bolt vis à tête cylindrique M4x25
0908.91.06.00 4 Verbindungselement link raccord M4
7 0972.46.01.00 1 Steckdose socket prise de courant
8 0971.25.84.00 1 Bediengerät BCE control box BCE appareil de commande BCE
9 0971.42.22.00 1 Magnetgummi magnetic magnetique
WELGER RP 405 / RP 435
37
18 11
10
12 8
39 32
35
33
32 32 17
36 1 9
16
19 20 4
3
WELGER RP 405 / RP 435
5
21 3 3 2
13
21
6
22 15
14
36 7
24
28 26 25
27 31
29
30
24
J 76
23
1755-161
ELEKTRIK BALER CONTROL E
ELEKTRONIC BALER CONTROL E
04.09
4
4
4 5 5
1 2 5
WELGER RP 405 / RP 435
5 5 2
5
6
7 7
4
5 4
6
2
J 77
1755-162
HÜLLROHRSATZ
ENCASING TUBE SET
04.09
1 1740.61.55.35 nB Hüllrohr (Meterware) encasing tube (meterarticle) tube de gainage (donner la longueur) ø 4,5
2 1740.61.35.61 nB Hüllrohr (Meterware) encasing tube (meterarticle) tube de gainage (donner la longueur) ø 7,5
3 1740.61.35.62 nB Hüllrohr (Meterware) encasing tube (meterarticle) tube de gainage (donner la longueur) ø 8,5
4 1740.61.35.63 nB Hüllrohr (Meterware) encasing tube (meterarticle) tube de gainage (donner la longueur) ø 10
5 1740.61.35.64 nB Hüllrohr (Meterware) encasing tube (meterarticle) tube de gainage (donner la longueur) ø 13
6 1740.61.35.65 nB Hüllrohr (Meterware) encasing tube (meterarticle) tube de gainage (donner la longueur) ø 17
7 1740.61.35.66 nB Hüllrohr (Meterware) encasing tube (meterarticle) tube de gainage (donner la longueur) ø 22
8* 1740.61.35.09 nB Schrumpfschlauch shrink hose tuyau thermoretractable
WELGER RP 405 / RP 435
J 77
20 11 14 15
17
04.09
12
18 8 10 13
9
13
1 10
12
WELGER RP 405 / RP 435
21 11
8
10
12
11
6 3 16
4
2 18 19
3 17
7
J 78
1755-163 5
DURCHMESSERANZEIGE
DIAMETER INDICATION
04.09
INDICATION DIAMÈTRE
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
56 57
35
34 28
4
28 25 5
58 3 2 19 18 20
33 43 12
1 26 27 44
32 27 11
41 42
WELGER RP 405 / RP 435
27 39 27
10
7 13
8 15
40 9
32 14
17
27 16
24 23
21
22
27
43
44
59 23
23
53
36 46
52 45
54 38
55 47 48
28
J 80
27
29 49
1755-165 30 31 50 51 29
ELEKTRIK BALERCONTROL E-LINK MASTER
ELECTRONIC BALER CONTROL E-LINK MASTER
04.09
1 1755.61.19.00 1 Kabelbaum kpl. loom of wires o. cables kpl. harnais de câbles cpl. BC 3
2 0971.31.11.00 1 Universal Steuergerät control unit automate control
3 0902.24.33.00 3 Zylinderschraube alan head bolt visà tête cylindrique M4x30
0908.91.06.00 3 Verbindungselement link raccord
4 0972.40.40.00 2 Stecker mit Dichtung plug with sealing fiche avec baque d´etancheite 35-polig
0972.34.31.00 nB Crimpkontakt crimp contact crimp contact 0,5-1,5mm 2
0972.34.32.00 nB Crimpkontakt crimp contact crimp contact 1,0-2,5mm 2
5 0972.40.41.00 2 Gummitülle rubber socket passe-fil en caoutchouc
6* 0972.40.46.00 2 Steckerdichtung zu Nr.4 plug bond for no.4 garniture de fiche pour no.4
7 0972.40.49.00 1 Stecker plug fiche
WELGER RP 405 / RP 435
30 0971.41.55.00 1 Drehwinkelgeber rot. angle donor donneur angulaire de rotation PMR 411
31 1902.61.07.05 1 Schaltpin switch pin goupille de commande
32 0974.10.10.00 2 Leuchte mit Schraubklemme lamp with screw terminal lampe avec born a vis
Fortsetzung J 81 continuation J 81 continuation J 81
37
38 22
04.09
56 57
35
34 28
4
28 25 5
58 3 2 19 18 20
33 43 12
1 26 27 44
32 27 11
41 42
WELGER RP 405 / RP 435
27 39 27
10
7 13
8 15
40 9
32 14
17
27 16
24 23
21
22
27
43
44
59 23
23
53
36 46
52 45
54 38
55 47 48
28
J 81
27
29 49
1755-165 30 31 50 51 29
ELEKTRIK BALERCONTROL E-LINK MASTER
ELECTRONIC BALER CONTROL E-LINK MASTER
04.09
10
9 3
3 1
3 4 2 2
7
WELGER RP 405 / RP 435
3 1 4
4
1 2
2 3 2 3
3 3 4 3
4 3
7
4 1 1 4 5
2
7 6 3 6 6
3 2
2 4 2
4
2
2
J 83
1755-166
HÜLLROHRSATZ MASTER
ENCASING TUBE SET MASTER
04.09
1 1740.61.55.35 nB Hüllrohr (Meterware) encasing tube (meterarticle) tube de gainage (donner la longueur) ø 4,5
2 1740.61.35.61 nB Hüllrohr (Meterware) encasing tube (meterarticle) tube de gainage (donner la longueur) ø 7,5
3 1740.61.35.63 nB Hüllrohr (Meterware) encasing tube (meterarticle) tube de gainage (donner la longueur) ø 10
4 1740.61.35.64 nB Hüllrohr (Meterware) encasing tube (meterarticle) tube de gainage (donner la longueur) ø 13
5 1740.61.35.65 nB Hüllrohr (Meterware) encasing tube (meterarticle) tube de gainage (donner la longueur) ø 17
6 1740.61.35.66 nB Hüllrohr (Meterware) encasing tube (meterarticle) tube de gainage (donner la longueur) ø 22
7 1740.61.35.66 nB Hüllrohr (Meterware) encasing tube (meterarticle) tube de gainage (donner la longueur) ø 26
8* 1740.61.35.09 nB Schrumpfschlauch shrink hose tuyau thermoretractable
9 0972.64.11.00 nB Kabelbinder cable binder collier de cable lg. 200mm, ø6 mm
10 0972.64.01.00 nB Kabelbinder cable binder collier de cable lg. 208
WELGER RP 405 / RP 435
12
18 8 10 13
9
13
10
12
WELGER RP 405 / RP 435
11
8
10
12
1
11
6
3 7
2 16
5
18 19
2 17
J 85
4
1755-164
DURCHMESSERANZEIGE MASTER
DIAMETER INDICATION MASTER
04.09
1 1752.61.11.04 1 Schwenkarm, kpl. mit Nr. 2+3 pivoting arm, cpl. with No. 3+4 bras pivotant, cpl. avec No. 3+4
2 0920.13.25.00 2 Laufbuchse sleeve douille
3 0926.10.41.00 1 Kegelschmiernippel grease nipple graisseur M 6x1
4 1753.61.26.07 1 Halter bracket support
5 0901.20.80.00 1 6kt-Schraube hex.bolt boulon à tête hex. M 8x80
0907.10.08.00 1 6kt-Mutter hex.nut écrou hexagonal M 68
0911.10.08.00 1 Federring spring washer rondelle grower A8
6 0915.51.58.00 1 Spannhülse expanding pin goupille mecanindus 6x40
7 0940.34.92.00 1 Schenkelfeder angle spring ressort
8 0726.15.00.00 2 Rolle roller poulie
WELGER RP 405 / RP 435
1
29 6
10 11
14
13
8
31 28 30
WELGER RP 405 / RP 435
9 16
1
25 12
17
15
26
22
16
18 20 19
21
3
K 10
27 4
1755-017 5
SCHUTZVERKLEIDUNG
GUARD CASINGS
08.05
CAPOTS DE PROTECTION
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
1 1755.51.11.02 1 Seitenteil, links kpl. side part, left cpl. partie latérale, gauche cpl.
1755.51.12.02 1 z Seitenteil, links kpl. side part, left cpl. partie latérale, gauche cpl.
2 1755.51.11.12 1 Seitenteil, rechts kpl. side part, right cpl. partie latérale, droite cpl.
1755.51.12.12 1 z Seitenteil, rechts kpl. side part, right cpl. partie latérale, droite cpl.
3 1752.51.01.03 2 Beschlag fitting garniture
4 0939.13.07.00 2 Kunststoffgriff plastic knob manche plastique M8
5 0901.20.49.00 4 6kt-Schraube hex.bolt boulon à tête hex. M 6x25
0907.60.06.00 4 Sicherungsmutter safety nut contre-écrou NM 6
6 1752.51.02.01 2 Halter oben bracket (lever) top support en haute
7 1752.51.02.08 1 Halter unten, rechts bracket (lever) lower, right support inferieur, droite
WELGER RP 405 / RP 435
8 1752.51.02.14 1 Halter unten, links bracket (lever) lower, left support inferieur, gauche
9 0901.21.49.00 8 6kt-Schraube hex.bolt boulon à tête hex. M 12x30
0911.10.12.00 8 Federring spring washer rondelle grower A 12
10 0901.21.49.00 8 6kt-Schraube hex.bolt boulon à tête hex. M 12x30
0911.56.12.00 8 Spannscheibe flat washer rondelle de serrage 12
11 1752.51.02.23 2 Gewindestange threaded rod tige filetée
12 0907.60.12.00 4 Sicherungsmutter safety nut contre-écrou NM 12
13 1753.51.02.75 2 Zapfen kpl. pivot cpl. pivot cpl.
14 0901.21.10.00 4 6kt-Schraube hex.bolt boulon à tête hex. M 10x30
0911.58.10.00 4 Sperrkantscheibe washer rondelle 10.5
15 0940.96.03.00 2 Gasfeder gas strut ressort de gaz
16 0901.20.71.00 4 6kt-Schraube hex.bolt boulon à tête hex. M 8x35
0911.10.08.00 4 Federring spring washer rondelle grower A8
0907.10.08.00 8 6kt-Mutter hex.nut écrou hexagonal M8
17 1752.51.02.41 1 Schlosskasten, links kpl. case of a lock, left cpl. coffre,gauche cpl.
18 1752.51.02.45 1 Sperrklinke, links kpl. hook , left cpl. crochet,gauche cpl.
19 0910.10.13.00 4 Scheibe washer rondelle 13
20 0916.10.95.00 2 Splint split pin goupille fendue 4x20
21 0938.20.10.00 2 Klappenverschluß lock verrouillage
22 0903.10.42.00 4 Flachrundschraube cup head bolt vis à tête ronde M 8x25
0911.56.08.00 4 Spannscheibe flat washer rondelle de serrage 8
0907.10.08.00 4 6kt-Mutter hex.nut écrou hexagonal M8
23 1752.51.02.61 1 Schlosskasten, rechts kpl. case of a lock, right cpl. coffre,droite cpl.
24 1752.51.02.65 1 Sperrklinke, rechts kpl. hook , right cpl. crochet, droite cpl.
1 2
6
10
29
14
11
13
WELGER RP 405 / RP 435
33 16
32 30 31 28
15
12
9
25 7
3 16
4 21 23
5
26
27
24 22
K 11
1755-018
SCHUTZVERKLEIDUNG
GUARD CASINGS
08.05
CAPOTS DE PROTECTION
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
6
13
12
4
4
18 7 8
17
WELGER RP 405 / RP 435
4 3
16 14
11
10
5
15
K 15
1755-168
SCHUTZVERKLEIDUNG - NETZBINDUNG
GUARD CASINGS - NET WRAPPING KIT
04.09
5
7
6
4
7
4 3
1755-023
04.09 WELGER RP 405 / RP 435 K 16
SCHUTZVERKLEIDUNG - GARNBINDUNG
GUARD CASINGS - TWINE TYING
04.09
6
4
8
7
13
WELGER RP 405 / RP 435
10
12
15
5
14
4
6
3
7
11
K 17
1755-169
SCHUTZVERKLEIDUNG - KOMBINATION GARN UND NETZBINDUNG
GUARD CASINGS - COMBINATION TWINE AND NET WRAPPING
04.09
8 13
11
3
5 4 6
WELGER RP 405 / RP 435
9
12
10
7 14
13
12
1
2
K 20
1752-044
SCHUTZVERKLEIDUNG - AUFSAMMLERBEREICH
GUARD CASINGS - PICK-UP AREA
08.05
11 12
14
15
13 17
5 20
WELGER RP 405 / RP 435
4
1 21
2 12
17
8
6
19
3
17
16
7
K 25
1729-255
SCHUTZBÜGEL UND AUFSTIEGE
GUARDRAIL AND STEPRAIL
08.05
1 1729.51.20.01 1 Träger rechts kpl. support right cpl. chassis droite cpl.
2 1729.51.20.05 1 Träger links kpl. support left cpl. chassis gauche cpl.
3 0901.21.50.00 4 6kt-Schraube hex.bolt boulon a tête hex. M12x35
0911.56.12.00 4 Spannscheibe flat washer rondelle de serrage 12
4-5 1729.51.20.12 1 Trittblech einbaufertig plat form cpl. for mounting tôle à marche piede cpl. pour installation
4 1729.51.20.90 1 Trittblech plat form tôle à marche piede
5* 0938.96.74.00 4 Antirutschbelagstreifen für Nr.4 nonslip surfacing strip for No.4 bande de revétement antidérapant pour No.4
6 0901.21.10.00 6 6kt-Schraube hex.bolt boulon a tête hex. M10x30
0910.10.10.00 6 Scheibe washer rondelle 10,5
7 1729.51.20.52 1 ¡ Schutzbügel guard rail étriér de protection
WELGER RP 405 / RP 435
8
12
9
6
10
5
2
9
4
3
1
14
6
1755-172
13
2
04.09 WELGER RP 405 / RP 435 K 30
BELEUCHTUNG
LIGHTING SYSTEM
04.09
ECLAIRAGE
POS.NR. TEILE NR. STÜCK BENENNUNG DESCRIPTION DESIGNATION TECH. INFO
POS.NO. PART.NO. QUANTITY TECH. INFO
POS.NO. NO. DE PIECE QUANTITEE INFO TECHN.
PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO.
0309.47.00.00 H25 2 0387.40.00.00 F21 38 0901.11.03.00 G10 12 0901.12.53.00 H65 22 0901.20.64.00 C60 13
0313.57.00.00 C20 2 0387.41.00.00 F21 39 0901.11.05.00 C20 15 0901.12.55.00 A20 14 0901.20.64.00 H10 8
0313.57.00.00 C20 4 0387.59.00.00 F20 32 0901.11.08.00 B20 4 0901.13.51.00 B20 18 0901.20.64.00 H30 23
0320.49.00.00 H60 29 0387.60.00.00 F20 33 0901.11.43.00 G20 13 0901.20.20.00 H30 10 0901.20.64.00 K20 8
0328.88.00.00 H60 24 0387.63.00.00 F20 24 0901.11.43.00 G25 19 0901.20.27.00 A40 13 0901.20.65.00 A32 7
0338.30.00.00 C20 14 0387.65.00.00 F20 29 0901.11.45.00 E20 11 0901.20.27.00 J76 39 0901.20.65.00 A32 7
0346.32.00.00 C20 3 0387.66.00.00 F20 23 0901.11.46.00 B75 13 0901.20.27.00 J81 33 0901.20.65.00 A32 7
0346.32.00.00 C20 5 0387.96.00.00 F20 15 0901.11.46.00 C50 18 0901.20.27.00 K30 5 0901.20.66.00 A40 11
0361.08.00.00 H10 16 0388.11.00.00 F20 7 0901.11.46.00 C55 18 0901.20.42.00 C80 24 0901.20.66.00 C45 4
0361.08.00.00 H11 23 0388.13.00.00 F20 9 0901.11.46.00 C60 18 0901.20.42.00 H20 18 0901.20.66.00 E20 15
0361.08.00.00 H15 20 0388.24.00.00 F20 8 0901.11.46.00 C80 13 0901.20.42.00 J81 44 0901.20.66.00 G60 8
0361.08.00.00 H16 27 0388.25.00.00 F20 10 0901.11.47.00 C51 41 0901.20.43.00 G10 16 0901.20.66.00 H15 13
WELGER RP 405 / RP 435
0361.08.00.00 H20 9 0388.37.00.00 F20 11 0901.11.47.00 C56 41 0901.20.43.00 G50 11 0901.20.66.00 H20 3
0361.08.00.00 H21 2 0389.40.00.00 F21 40 0901.11.47.00 C61 41 0901.20.43.00 H70 8 0901.20.66.00 H20 27
0361.10.00.00 H20 12 0389.48.00.00 F20 30 0901.11.47.00 H55 23 0901.20.43.00 J81 48 0901.20.66.00 H21 8
0385.01.00.00 F20 26 0389.92.00.00 F20 22 0901.11.48.00 H10 15 0901.20.45.00 A40 12 0901.20.66.00 H60 28
0385.13.00.00 F21 45 0389.93.00.00 F20 14 0901.11.48.00 H15 19 0901.20.45.00 H10 17 0901.20.66.00 H62 7
0385.14.00.00 F21 45 0389.94.00.00 F20 21 0901.11.49.00 B75 11 0901.20.45.00 H15 5 0901.20.66.00 J10 19
0385.15.00.00 F21 45 0390.84.00.00 F21 41 0901.11.52.00 K20 7 0901.20.45.00 H15 21 0901.20.66.00 J30 27
0385.16.00.00 F21 45 0391.06.00.00 F20 18 0901.11.61.00 G40 9 0901.20.45.00 K11 25 0901.20.66.00 J31 25
0385.48.00.00 F20 3 0392.71.00.00 F20 16 0901.12.05.00 C80 7 0901.20.45.00 K15 4 0901.20.66.00 J36 47
0385.51.00.00 F20 5 0394.98.00.00 F20 17 0901.12.08.00 J30 24 0901.20.45.00 K16 4 0901.20.66.00 J41 50
0385.52.00.00 F20 2 0395.99.00.00 F20 16 0901.12.08.00 J31 6 0901.20.45.00 K17 4 0901.20.66.00 J46 55
0385.53.00.00 F20 1 0396.45.00.00 F20 19 0901.12.08.00 J36 35 0901.20.45.00 K17 12 0901.20.66.00 J51 44
0385.55.00.00 F20 5 0500.59.59.00 E35 7 0901.12.08.00 J40 6 0901.20.47.00 E20 6 0901.20.66.00 J56 51
0385.56.00.00 F20 5 0726.11.00.00 A45 6 0901.12.08.00 J45 6 0901.20.47.00 H30 25 0901.20.66.00 J60 11
0385.57.00.00 F20 5 0726.15.00.00 J78 8 0901.12.08.00 J50 6 0901.20.47.00 H65 17 0901.20.66.00 J61 54
0385.58.00.00 F20 5 0726.15.00.00 J85 8 0901.12.08.00 J55 6 0901.20.47.00 H70 10 0901.20.66.00 J65 11
0385.59.00.00 F20 5 0901.10.20.00 C75 9 0901.12.08.00 J60 6 0901.20.47.00 H70 18 0901.20.66.00 J66 54
0385.74.00.00 F20 4 0901.10.20.00 C80 17 0901.12.08.00 J65 6 0901.20.47.00 J81 46 0901.20.66.00 J70 11
0385.94.00.00 F20 28 0901.10.22.00 A40 29 0901.12.08.00 J70 6 0901.20.47.00 J81 51 0901.20.66.00 J71 54
0386.43.00.00 F20 12 0901.10.64.00 B11 6 0901.12.16.00 C51 27 0901.20.49.00 E20 6 0901.20.66.00 J81 38
0386.44.00.00 F20 13 0901.10.66.00 H60 22 0901.12.16.00 C56 27 0901.20.49.00 E20 13 0901.20.66.00 K11 26
0386.46.00.00 F20 31 0901.10.67.00 J40 24 0901.12.16.00 C61 27 0901.20.49.00 H55 4 0901.20.67.00 H26 28
0386.49.00.00 F20 27 0901.10.67.00 J45 24 0901.12.42.00 C50 4 0901.20.49.00 H70 14 0901.20.68.00 A32 3
0386.55.00.00 F21 35 0901.10.67.00 J50 24 0901.12.42.00 C55 4 0901.20.49.00 J81 42 0901.20.68.00 A32 3
0386.79.00.00 F21 36 0901.10.67.00 J55 24 0901.12.42.00 C60 4 0901.20.49.00 K10 5 0901.20.68.00 A32 3
0386.96.00.00 F21 37 0901.10.77.00 G50 7 0901.12.48.00 B20 25 0901.20.51.00 H51 34 0901.20.68.00 G60 11
0386.97.00.00 F20 25 0901.10.77.00 G70 11 0901.12.48.00 D66 29 0901.20.51.00 H60 33 0901.20.68.00 G70 14
F21 G72 A21 J78 G72
L1
PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO.
0901.20.68.00 H62 2 0901.21.04.00 G40 6 0901.21.49.00 K10 10 0901.80.63.00 H55 17 0903.10.18.00 H65 18
0901.20.68.00 H62 3 0901.21.04.00 J10 12 0901.21.50.00 B30 19 0901.80.67.00 A45 3 0903.10.18.00 H70 15
0901.20.68.00 J36 49* 0901.21.06.00 K25 10 0901.21.50.00 B30 21 0902.10.10.00 H26 31 0903.10.19.00 K20 3
0901.20.68.00 J81 58 0901.21.08.00 A45 15 0901.21.50.00 K25 3 0902.10.21.00 H25 16 0903.10.24.00 H61 43
0901.20.68.00 K15 18 0901.21.08.00 C15 6 0901.21.51.00 A45 18 0902.10.23.00 G34 6 0903.10.40.00 H50 28
0901.20.68.00 K20 14 0901.21.08.00 C20 20 0901.21.51.00 C10 22 0902.10.24.00 G32 6 0903.10.40.00 H62 8
0901.20.68.00 K25 14 0901.21.08.00 C65 11 0901.21.51.00 G32 7 0902.10.26.00 K20 2 0903.10.41.00 H15 12
0901.20.68.00 K25 18 0901.21.08.00 C65 12 0901.21.51.00 H61 63 0902.10.30.01 J20 3 0903.10.41.00 H20 5
0901.20.70.00 C51 34 0901.21.08.00 H11 27 0901.21.52.00 D65 25 0902.10.35.00 J25 3 0903.10.41.00 J78 15
0901.20.70.00 C56 34 0901.21.08.00 H50 29 0901.21.52.00 G34 7 0902.10.60.00 J30 21 0903.10.41.00 J85 15
0901.20.70.00 C61 34 0901.21.08.00 H61 49 0901.21.53.00 J78 11 0902.10.60.00 J31 3 0903.10.41.00 K11 29
0901.20.70.00 E11 29 0901.21.08.00 H61 60 0901.21.53.00 J85 11 0902.10.60.00 J36 34 0903.10.41.00 K15 16
WELGER RP 405 / RP 435
0901.20.70.00 E30 13 0901.21.08.00 H70 2 0901.21.66.00 H56 5 0902.10.60.00 J40 3 0903.10.42.00 B10 20
0901.20.70.00 G10 19 0901.21.10.00 B60 5 0901.21.70.00 B40 10 0902.10.60.00 J45 3 0903.10.42.00 B11 4
0901.20.70.00 G50 13 0901.21.10.00 C15 17 0901.21.70.00 E10 24 0902.10.60.00 J50 3 0903.10.42.00 C75 18
0901.20.70.00 G60 17 0901.21.10.00 C25 10 0901.22.10.00 C45 2 0902.10.60.00 J55 3 0903.10.42.00 C81 28
0901.20.70.00 H20 4 0901.21.10.00 E11 40 0901.22.23.00 B20 13 0902.10.60.00 J60 3 0903.10.42.00 H30 12
0901.20.70.00 H21 7 0901.21.10.00 H10 10 0901.22.25.00 B20 13 0902.10.60.00 J65 3 0903.10.42.00 H62 4
0901.20.70.00 H21 9 0901.21.10.00 H11 28 0901.22.52.00 C50 3 0902.10.60.00 J70 3 0903.10.42.00 J40 23
0901.20.70.00 H22 4 0901.21.10.00 H22 3 0901.22.52.00 C55 3 0902.10.61.00 B70 5 0903.10.42.00 J45 23
0901.20.70.00 H22 5 0901.21.10.00 H61 47 0901.22.52.00 C60 3 0902.10.64.00 H50 20 0903.10.42.00 J50 23
0901.20.70.00 H51 40 0901.21.10.00 H65 12 0901.22.53.00 B10 13 0902.10.68.00 C10 25 0903.10.42.00 J55 23
0901.20.70.00 H60 34 0901.21.10.00 H70 4 0901.22.58.00 C10 18 0902.10.68.00 H55 19 0903.10.42.00 K10 22
0901.20.70.00 J36 44 0901.21.10.00 K10 14 0901.30.30.00 B11 9 0902.16.26.00 B10 4 0903.10.43.00 H50 25
0901.20.70.00 J41 47 0901.21.10.00 K17 13 0901.30.30.00 C51 44 0902.24.31.00 J75 6 0903.10.44.00 H30 13
0901.20.70.00 J46 52 0901.21.10.00 K25 6 0901.30.30.00 C56 44 0902.24.33.00 J80 3 0903.10.70.00 C45 11
0901.20.70.00 J51 41 0901.21.11.00 C27 17 0901.30.43.00 B75 8 0902.24.47.00 J76 35 0903.10.71.00 B10 7
0901.20.70.00 J56 48 0901.21.11.00 H21 6 0901.30.43.00 C10 16 0902.24.52.00 K30 12 0903.10.71.00 B50 2
0901.20.70.00 J60 10 0901.21.11.00 H56 3 0901.30.43.00 C25 9 0902.50.72.00 B50 9 0903.10.71.00 C20 19
0901.20.70.00 J65 10 0901.21.11.00 H56 4 0901.30.45.00 B11 6 0902.60.34.00 H10 4 0903.10.71.00 C20 24
0901.20.70.00 J70 10 0901.21.12.00 B50 7 0901.30.45.00 C40 8 0902.60.34.00 K15 14 0903.10.71.00 C40 12
0901.20.70.00 K17 11 0901.21.12.00 H15 8 0901.30.45.00 C41 8 0902.60.36.00 B10 10 0903.10.71.00 C41 12
0901.20.70.00 K25 17 0901.21.13.00 K25 12 0901.30.48.00 C40 8 0902.60.39.00 H20 20 0903.10.71.00 H25 11
0901.20.71.00 J30 17 0901.21.14.00 H65 10 0901.30.88.00 B75 9 0902.60.39.00 J75 12 0903.10.72.00 A45 5
0901.20.71.00 J31 22 0901.21.16.00 B11 11 0901.30.88.00 C10 4 0902.60.39.00 J80 20 0903.10.72.00 H15 9
0901.20.71.00 J61 51 0901.21.19.00 B75 12 0901.30.90.00 E10 5 0902.60.43.00 H30 17 0903.10.72.00 K25 8
0901.20.71.00 J66 51 0901.21.45.00 H60 25 0901.30.90.00 G50 10 0902.60.64.00 G30 6 0903.10.73.00 C25 3
0901.20.71.00 J71 51 0901.21.45.00 J81 40 0901.30.90.00 G70 21 0902.60.70.00 G30 7 0903.10.73.00 C27 5
0901.20.71.00 K10 16 0901.21.47.00 C45 3 0901.30.90.00 G72 16 0903.10.15.00 H55 29 0903.10.73.00 C27 8
E30 H60 B20 J83 H61
L2
PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO.
0903.11.03.00 C41 18 0907.10.06.00 H70 6 0907.10.08.00 J36 49* 0907.10.10.00 H61 65 0907.60.06.00 K10 5
0903.11.14.00 E10 16 0907.10.06.00 H70 13 0907.10.08.00 J78 15 0907.10.10.00 H65 10 0907.60.06.00 K15 10
0903.30.84.00 B60 7 0907.10.06.00 H70 19 0907.10.08.00 J81 58 0907.10.10.00 J10 12 0907.60.06.00 K15 14
0903.36.06.00 H50 21 0907.10.06.00 J75 12 0907.10.08.00 J85 5 0907.10.12.00 B40 11 0907.60.08.00 A40 11
0903.60.54.00 J78 21 0907.10.06.00 J78 20 0907.10.08.00 J85 15 0907.10.12.00 C51 33 0907.60.08.00 B10 4
0903.80.07.00 D65 28 0907.10.06.00 J80 20 0907.10.08.00 K10 16 0907.10.12.00 C56 33 0907.60.08.00 B11 4
0904.55.26.00 C80 8 0907.10.06.00 J81 42 0907.10.08.00 K10 22 0907.10.12.00 C61 33 0907.60.08.00 B50 9
0904.67.59.00 H65 6 0907.10.06.00 J81 46 0907.10.08.00 K11 29 0907.10.12.00 E10 16 0907.60.08.00 C75 18
0905.10.40.00 H21 12 0907.10.06.00 J83 13* 0907.10.08.00 K11 31 0907.10.12.00 E10 25 0907.60.08.00 C81 28
0905.19.10.00 C10 27 0907.10.06.00 J85 20 0907.10.08.00 K15 7 0907.10.12.00 E20 11 0907.60.08.00 E30 12
0905.19.10.00 H15 11 0907.10.06.00 K11 25 0907.10.08.00 K15 16 0907.10.12.00 H10 15 0907.60.08.00 E30 13
0905.19.10.00 K15 5 0907.10.06.00 K15 4 0907.10.08.00 K15 18 0907.10.12.00 H15 19 0907.60.08.00 H10 6
WELGER RP 405 / RP 435
0905.19.10.00 K16 5 0907.10.06.00 K16 4 0907.10.08.00 K16 7 0907.10.12.00 H55 26 0907.60.08.00 H10 8
0905.19.10.00 K17 5 0907.10.06.00 K17 4 0907.10.08.00 K17 7 0907.10.12.00 H56 5 0907.60.08.00 H22 4
0905.19.10.00 K20 10 0907.10.06.00 K20 3 0907.10.08.00 K17 11 0907.10.14.00 B20 15 0907.60.08.00 H30 13
0905.19.21.00 A21 23 0907.10.08.00 A32 3 0907.10.08.00 K20 2 0907.10.16.00 B70 17 0907.60.08.00 H51 40
0905.19.21.00 B40 19 0907.10.08.00 A32 3 0907.10.08.00 K20 12 0907.10.16.00 C10 19 0907.60.08.00 J40 23
0905.19.21.00 C65 15 0907.10.08.00 A32 3 0907.10.08.00 K20 14 0907.10.16.00 C65 18 0907.60.08.00 J40 24
0905.19.21.00 C70 13 0907.10.08.00 B10 20 0907.10.08.00 K25 18 0907.10.16.00 C70 18 0907.60.08.00 J45 23
0905.19.21.00 J20 11 0907.10.08.00 B30 3 0907.10.10.00 B50 7 0907.10.16.00 C70 21 0907.60.08.00 J45 24
0905.19.21.00 J25 11 0907.10.08.00 E20 15 0907.10.10.00 B70 5 0907.10.16.00 H50 14 0907.60.08.00 J50 23
0905.19.21.00 K17 15 0907.10.08.00 H15 12 0907.10.10.00 B75 12 0907.16.16.00 E11 34 0907.60.08.00 J50 24
0905.58.15.00 K11 33 0907.10.08.00 H20 3 0907.10.10.00 C10 12 0907.16.24.00 G60 18 0907.60.08.00 J55 23
0907.10.05.00 J20 24 0907.10.08.00 H20 4 0907.10.10.00 C10 25 0907.20.10.00 H65 10 0907.60.08.00 J55 24
0907.10.05.00 J25 24 0907.10.08.00 H20 5 0907.10.10.00 C15 6 0907.20.16.00 B60 9 0907.60.08.00 J60 10
0907.10.05.00 J76 35 0907.10.08.00 H21 3 0907.10.10.00 C20 15 0907.22.06.00 J78 18 0907.60.08.00 J65 10
0907.10.05.00 J76 39 0907.10.08.00 H21 8 0907.10.10.00 C20 19 0907.22.06.00 J85 18 0907.60.08.00 J70 10
0907.10.05.00 J81 33 0907.10.08.00 H21 9 0907.10.10.00 C20 20 0907.22.08.00 H60 28 0907.60.08.00 K25 14
0907.10.05.00 K30 5 0907.10.08.00 H26 28 0907.10.10.00 C20 24 0907.22.16.00 C10 20 0907.60.08.00 K25 17
0907.10.05.00 K30 7 0907.10.08.00 H26 29 0907.10.10.00 C20 25 0907.22.19.00 J10 15 0907.60.10.00 A45 5
0907.10.05.00 K30 12 0907.10.08.00 H26 40 0907.10.10.00 C27 3 0907.22.19.00 J20 16 0907.60.10.00 A45 15
0907.10.06.00 C80 8 0907.10.08.00 H30 12 0907.10.10.00 C40 12 0907.22.19.00 J25 16 0907.60.10.00 B10 7
0907.10.06.00 E20 6 0907.10.08.00 H30 13 0907.10.10.00 C41 12 0907.56.06.00 H20 20 0907.60.10.00 B11 11
0907.10.06.00 E20 13 0907.10.08.00 H30 17 0907.10.10.00 C75 16 0907.56.06.00 H50 22 0907.60.10.00 B20 4
0907.10.06.00 H10 4 0907.10.08.00 H50 25 0907.10.10.00 C81 26 0907.56.06.00 H51 34 0907.60.10.00 B50 2
0907.10.06.00 H10 17 0907.10.08.00 H50 28 0907.10.10.00 E11 39 0907.60.05.00 A40 13 0907.60.10.00 B60 5
0907.10.06.00 H11 24 0907.10.08.00 H60 34 0907.10.10.00 H15 9 0907.60.06.00 A40 12 0907.60.10.00 B75 12
0907.10.06.00 H15 5 0907.10.08.00 H62 2 0907.10.10.00 H21 6 0907.60.06.00 A40 29 0907.60.10.00 C15 8
0907.10.06.00 H15 21 0907.10.08.00 H62 4 0907.10.10.00 H22 3 0907.60.06.00 C75 9 0907.60.10.00 C15 16
H16 H62 H50 C80 C15
L3
PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO.
0907.60.10.00 C27 8 0907.60.16.00 A20 17 0910.10.08.00 A32 3 0910.10.10.00 H56 3 0910.10.21.00 A45 7
0907.60.10.00 C27 17 0907.60.16.00 A21 20 0910.10.08.00 A32 7 0910.10.10.00 H56 4 0910.10.21.00 B40 14
0907.60.10.00 C27 21 0907.60.16.00 B10 14 0910.10.08.00 A32 3 0910.10.10.00 H61 49 0910.10.21.00 C27 11
0907.60.10.00 C65 11 0907.60.16.00 B20 25 0910.10.08.00 A32 7 0910.10.10.00 H61 65 0910.10.21.00 C65 22
0907.60.10.00 H10 10 0907.60.16.00 C35 9 0910.10.08.00 A32 3 0910.10.10.00 H65 10 0910.10.21.00 C70 28
0907.60.10.00 H11 27 0907.60.16.00 C65 7 0910.10.08.00 A32 7 0910.10.10.00 H70 2 0910.10.21.00 H26 34
0907.60.10.00 H11 28 0907.60.16.00 C70 7 0910.10.08.00 B10 20 0910.10.10.00 H70 4 0910.10.21.00 H61 51
0907.60.10.00 H25 11 0907.60.16.00 D66 29 0910.10.08.00 B11 4 0910.10.10.00 K25 6 0910.10.21.00 J36 41
0907.60.10.00 H25 12 0907.60.20.00 B20 18 0910.10.08.00 B11 6 0910.10.10.00 K25 8 0910.10.21.00 J46 49
0907.60.10.00 H70 2 0907.60.20.00 B20 23 0910.10.08.00 B11 7 0910.10.10.00 K25 10 0910.10.21.00 J56 45
0907.60.10.00 H70 4 0907.60.20.00 C27 11 0910.10.08.00 C40 8 0910.10.10.00 K25 12 0910.10.21.00 J61 48
0907.60.10.00 K25 8 0907.80.08.00 H60 18 0910.10.08.00 C41 8 0910.10.13.00 A15 18 0910.10.21.00 J66 48
WELGER RP 405 / RP 435
0907.60.10.00 K25 10 0907.80.12.00 C15 14 0910.10.08.00 E20 15 0910.10.13.00 A45 18 0910.10.21.00 J71 48
0907.60.10.00 K25 12 0907.83.10.00 C15 19 0910.10.08.00 E30 12 0910.10.13.00 B30 21 0910.10.31.00 J10 27
0907.60.12.00 A40 21 0907.83.10.00 C45 11 0910.10.08.00 E30 13 0910.10.13.00 B75 13 0910.15.06.00 H11 24
0907.60.12.00 A45 18 0908.31.06.00 H11 22 0910.10.08.00 H10 6 0910.10.13.00 C15 14 0910.15.06.00 H16 28
0907.60.12.00 B30 19 0908.31.06.00 H16 26 0910.10.08.00 H10 8 0910.10.13.00 E20 11 0910.15.09.00 K15 18
0907.60.12.00 B30 21 0908.31.06.00 H61 43 0910.10.08.00 H15 12 0910.10.13.00 H55 23 0910.15.09.00 K17 11
0907.60.12.00 B75 11 0908.31.06.00 H65 19 0910.10.08.00 H15 13 0910.10.13.00 H56 5 0910.15.11.00 C15 8
0907.60.12.00 B75 13 0908.31.06.00 H70 15 0910.10.08.00 H21 3 0910.10.13.00 J78 12 0910.15.11.00 H15 9
0907.60.12.00 C41 18 0908.69.08.00 D65 17 0910.10.08.00 H21 8 0910.10.13.00 J81 40 0910.15.11.00 K17 13
0907.60.12.00 C80 13 0908.69.10.00 G10 15 0910.10.08.00 H21 9 0910.10.13.00 J85 12 0910.15.12.00 A45 3
0907.60.12.00 G40 9 0908.81.06.00 C65 17 0910.10.08.00 H22 4 0910.10.13.00 K10 19 0910.15.12.00 A45 5
0907.60.12.00 J76 30 0908.81.06.00 C70 20 0910.10.08.00 H22 5 0910.10.15.00 A40 24 0910.15.14.00 B20 14
0907.60.12.00 J78 13 0908.88.03.00 A15 7 0910.10.08.00 H26 29 0910.10.15.00 C51 28 0910.15.22.00 C75 10
0907.60.12.00 J81 55 0908.91.06.00 J75 6 0910.10.08.00 H50 25 0910.10.15.00 C56 28 0910.15.22.00 C75 23
0907.60.12.00 J85 13 0908.91.06.00 J80 3 0910.10.08.00 H50 28 0910.10.15.00 C61 28 0910.15.22.00 C80 18
0907.60.12.00 K10 12 0908.91.10.00 J76 34 0910.10.08.00 J60 11 0910.10.15.00 H60 12 0910.15.22.00 C81 34
0907.60.14.00 C51 29 0910.10.06.00 C80 24 0910.10.08.00 J61 54 0910.10.15.00 J30 24 0910.15.26.00 J20 26
0907.60.14.00 C56 29 0910.10.06.00 E20 13 0910.10.08.00 J65 11 0910.10.15.00 J31 6 0910.15.26.00 J25 30
0907.60.14.00 C61 29 0910.10.06.00 H10 4 0910.10.08.00 J66 54 0910.10.15.00 J36 35 0910.15.30.00 B40 21
0907.60.14.00 C80 7 0910.10.06.00 H20 18 0910.10.08.00 J70 11 0910.10.15.00 J40 6 0910.15.30.00 J10 30
0907.60.14.00 J30 24 0910.10.06.00 H51 34 0910.10.08.00 J71 54 0910.10.15.00 J45 6 0910.25.31.00 C25 6
0907.60.14.00 J31 6 0910.10.06.00 H60 33 0910.10.10.00 B10 7 0910.10.15.00 J50 6 0910.25.31.00 C27 12
0907.60.14.00 J36 35 0910.10.06.00 H70 8 0910.10.10.00 B11 11 0910.10.15.00 J55 6 0910.30.05.00 J76 35
0907.60.14.00 J40 6 0910.10.06.00 H70 14 0910.10.10.00 B70 5 0910.10.15.00 J60 6 0910.30.15.00 H61 38
0907.60.14.00 J45 6 0910.10.06.00 J75 12 0910.10.10.00 C65 11 0910.10.15.00 J65 6 0910.30.17.00 B60 15
0907.60.14.00 J50 6 0910.10.06.00 J80 20 0910.10.10.00 C65 12 0910.10.15.00 J70 6 0910.40.06.00 B11 9
0907.60.14.00 J55 6 0910.10.06.00 J81 42 0910.10.10.00 H10 10 0910.10.17.00 A40 25 0910.40.06.00 C51 44
J60 J81 H11 B20 C56
L4
PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO.
0910.40.06.00 H61 43 0910.60.15.00 J50 7 0910.73.42.00 C55 23 0910.76.88.00 D30 28 0911.10.05.00 K30 5
0910.40.06.00 K15 10 0910.60.15.00 J55 7 0910.73.42.00 E10 3 0910.80.03.00 H30 10 0911.10.05.00 K30 7
0910.40.09.00 C25 9 0910.60.15.00 J60 7 0910.73.43.00 C50 23 0910.80.18.00 B40 19 0911.10.05.00 K30 12
0910.40.09.00 C45 4 0910.60.15.00 J65 7 0910.73.43.00 C55 23 0910.80.18.00 C10 15 0911.10.06.00 E20 6
0910.40.09.00 C51 34 0910.60.15.00 J70 7 0910.73.43.00 C60 23 0910.80.18.00 H51 40 0911.10.06.00 E20 13
0910.40.09.00 C56 34 0910.60.21.00 B20 18 0910.73.43.00 E10 3 0910.80.18.00 H62 2 0911.10.06.00 G10 16
0910.40.09.00 C61 34 0910.60.21.00 C65 21 0910.73.44.00 C50 23 0910.80.18.00 H62 3 0911.10.06.00 G50 11
0910.40.09.00 H25 22 0910.60.21.00 C70 23 0910.73.44.00 C55 23 0910.80.18.00 J40 23 0911.10.06.00 H10 17
0910.40.09.00 J31 25 0910.60.21.00 C70 27 0910.73.44.00 C60 23 0910.80.18.00 J45 23 0911.10.06.00 H11 24
0910.40.09.00 K11 31 0910.64.06.00 H15 5 0910.73.44.00 E10 3 0910.80.18.00 J50 23 0911.10.06.00 H15 5
0910.40.11.00 C10 13 0910.64.06.00 H55 7 0910.73.71.00 G70 17 0910.80.18.00 J55 23 0911.10.06.00 H15 21
0910.40.11.00 C15 6 0910.64.06.00 K11 33 0910.73.71.00 G72 18 0910.80.18.00 J60 10 0911.10.06.00 H16 28
WELGER RP 405 / RP 435
0910.40.11.00 C15 17 0910.70.56.00 H60 17 0910.73.73.00 G70 6 0910.80.18.00 J65 10 0911.10.06.00 H30 25
0910.40.11.00 C25 10 0910.71.26.00 C10 24 0910.73.73.00 G72 18 0910.80.18.00 J70 10 0911.10.06.00 H30 29
0910.40.11.00 C27 17 0910.71.28.00 C10 24 0910.73.74.00 G10 10 0910.80.18.00 K20 12 0911.10.06.00 H55 4
0910.40.18.00 B70 15 0910.71.29.00 C10 24 0910.73.74.00 G70 17 0910.80.18.00 K25 17 0911.10.06.00 H55 29
0910.54.17.00 A20 14 0910.71.34.00 H50 5 0910.73.74.00 G72 18 0910.80.30.00 C27 20 0911.10.06.00 H70 8
0910.54.17.00 A20 17 0910.71.74.00 B60 12 0910.74.63.00 C50 22 0910.80.33.00 H65 12 0911.10.06.00 H70 10
0910.54.17.00 A21 20 0910.71.78.00 C75 12 0910.74.63.00 C55 22 0910.80.39.00 C10 3 0911.10.06.00 J78 20
0910.54.17.00 B10 14 0910.71.78.00 C80 20 0910.74.63.00 C60 22 0910.80.39.00 E10 14 0911.10.06.00 J81 42
0910.54.17.00 B20 25 0910.71.79.00 C75 12 0910.74.64.00 C50 22 0910.80.45.00 C51 32 0911.10.06.00 J81 46
0910.54.17.00 D66 29 0910.71.79.00 C80 20 0910.74.64.00 C55 22 0910.80.45.00 C56 32 0911.10.06.00 J81 48
0910.54.21.00 B20 23 0910.72.03.00 E10 19 0910.74.64.00 C60 22 0910.80.45.00 C61 32 0911.10.06.00 J85 20
0910.60.06.00 H65 16 0910.72.04.00 C35 11 0910.75.20.00 D65 21 0910.80.46.00 E10 4 0911.10.06.00 K11 25
0910.60.06.00 H70 15 0910.72.05.00 C35 11 0910.75.21.00 D65 21 0910.80.46.00 G50 9 0911.10.06.00 K15 4
0910.60.08.00 C40 8 0910.72.05.00 E10 19 0910.75.22.00 D65 21 0910.80.46.00 G70 20 0911.10.06.00 K16 4
0910.60.08.00 H20 24 0910.72.05.00 E11 33 0910.75.23.00 D65 21 0910.80.46.00 G72 17 0911.10.06.00 K17 4
0910.60.08.00 H30 23 0910.72.05.00 G60 19 0910.75.34.00 B70 6 0910.80.63.00 C50 12 0911.10.06.00 K20 3
0910.60.10.00 H10 10 0910.72.77.00 C10 8 0910.75.65.00 D65 22 0910.80.63.00 C55 12 0911.10.08.00 B10 20
0910.60.10.00 H11 28 0910.72.77.00 C40 16 0910.75.69.00 D65 22 0910.80.63.00 C60 12 0911.10.08.00 E11 29
0910.60.10.00 H25 12 0910.72.77.00 C41 16 0910.75.70.00 D65 22 0910.80.67.00 C65 6 0911.10.08.00 E35 4
0910.60.10.00 H50 29 0910.72.78.00 C40 16 0910.75.71.00 D65 22 0910.80.67.00 C70 6 0911.10.08.00 G60 17
0910.60.10.00 H56 3 0910.72.78.00 C41 16 0910.76.01.00 D65 23 0910.80.67.00 C70 17 0911.10.08.00 H15 12
0910.60.10.00 H61 47 0910.72.79.00 B40 3 0910.76.02.00 D65 23 0910.80.90.00 H10 16 0911.10.08.00 H15 13
0910.60.13.00 E10 15 0910.72.79.00 C10 8 0910.76.03.00 D65 23 0910.80.90.00 H11 23 0911.10.08.00 H20 3
0910.60.13.00 G40 9 0910.72.79.00 C40 16 0910.76.04.00 D65 23 0910.80.90.00 H15 20 0911.10.08.00 H20 4
0910.60.13.00 H10 14 0910.72.79.00 C41 16 0910.76.24.00 E10 18 0910.80.90.00 H16 27 0911.10.08.00 H20 5
0910.60.13.00 H15 18 0910.73.13.00 C35 15 0910.76.50.00 G70 16 0910.80.90.00 H20 10 0911.10.08.00 H20 27
0910.60.15.00 J30 25 0910.73.14.00 C35 15 0910.76.88.00 D05 28 0910.80.90.00 H21 2 0911.10.08.00 H21 3
J31 C50 D10 B30 H21
L5
PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO.
0911.10.08.00 H25 22 0911.10.08.00 K16 7 0911.50.08.00 C60 13 0911.85.12.00 C50 18 0912.15.85.00 H60 5
0911.10.08.00 H26 28 0911.10.08.00 K17 7 0911.56.08.00 K10 22 0911.85.12.00 C51 41 0912.15.99.00 D65 16
0911.10.08.00 H26 29 0911.10.08.00 K17 11 0911.56.08.00 K11 29 0911.85.12.00 C55 18 0912.16.04.00 D65 15
0911.10.08.00 H26 40 0911.10.08.00 K20 2 0911.56.08.00 K15 16 0911.85.12.00 C56 41 0912.16.15.00 D05 29
0911.10.08.00 H30 12 0911.10.08.00 K20 14 0911.56.08.00 K20 8 0911.85.12.00 C60 18 0912.16.15.00 D10 29
0911.10.08.00 H30 13 0911.10.08.00 K25 14 0911.56.10.00 G20 12 0911.85.12.00 C61 41 0912.16.15.00 D15 29
0911.10.08.00 H30 23 0911.10.10.00 B50 7 0911.56.10.00 G25 13 0911.85.16.00 C50 5 0912.16.15.00 D20 29
0911.10.08.00 H50 25 0911.10.10.00 B75 12 0911.56.10.00 H61 60 0911.85.16.00 C55 5 0912.16.15.00 D25 29
0911.10.08.00 H60 22 0911.10.10.00 C10 12 0911.56.10.00 H70 4 0911.85.16.00 C60 5 0912.16.15.00 D30 29
0911.10.08.00 H62 2 0911.10.10.00 C10 25 0911.56.12.00 C45 3 0912.10.02.00 H30 19 0912.50.10.00 C20 9
0911.10.08.00 H62 4 0911.10.10.00 C15 6 0911.56.12.00 G25 19 0912.10.12.00 H25 5 0912.68.70.00 G10 9
0911.10.08.00 H62 7 0911.10.10.00 C27 3 0911.56.12.00 K10 10 0912.10.15.00 H50 8 0912.68.70.00 G70 9
WELGER RP 405 / RP 435
0911.10.08.00 H62 8 0911.10.10.00 E11 39 0911.56.12.00 K20 7 0912.10.15.00 H61 39 0912.70.05.00 G10 6
0911.10.08.00 J10 14 0911.10.10.00 E11 40 0911.56.12.00 K25 3 0912.10.16.00 H30 22 0912.82.29.00 C70 25
0911.10.08.00 J10 19 0911.10.10.00 G40 6 0911.56.14.00 C45 2 0912.10.17.00 H25 10 0913.10.46.00 C10 2
0911.10.08.00 J20 0911.10.10.00 H15 9 0911.56.16.00 A15 18 0912.10.18.00 H60 31 0913.10.62.00 C10 6
0911.10.08.00 J30 17 0911.10.10.00 H21 6 0911.56.16.00 B10 13 0912.10.20.00 H10 16 0913.10.70.00 C81 38
0911.10.08.00 J30 27 0911.10.10.00 H50 29 0911.56.20.00 B20 24 0912.10.20.00 H11 23 0913.70.02.00 H30 30
0911.10.08.00 J31 22 0911.10.10.00 H55 19 0911.58.10.00 C20 15 0912.10.20.00 H15 20 0914.70.14.00 B10 10
0911.10.08.00 J36 44 0911.10.10.00 H56 3 0911.58.10.00 C20 19 0912.10.20.00 H16 27 0914.70.14.00 B10 18
0911.10.08.00 J36 47 0911.10.10.00 H56 4 0911.58.10.00 C20 20 0912.10.20.00 H20 11 0914.70.15.00 B10 17
0911.10.08.00 J36 49* 0911.10.10.00 H61 49 0911.58.10.00 C20 24 0912.10.20.00 H21 2 0914.70.16.00 B10 16
0911.10.08.00 J41 47 0911.10.10.00 H61 65 0911.58.10.00 C20 25 0912.10.25.00 E10 17 0914.70.17.00 B10 15
0911.10.08.00 J41 50 0911.10.10.00 H65 10 0911.58.10.00 C27 5 0912.10.34.00 H20 13 0915.14.38.00 H30 6
0911.10.08.00 J46 52 0911.10.10.00 H65 12 0911.58.10.00 C40 12 0912.10.35.00 B40 4 0915.14.66.00 H60 3
0911.10.08.00 J46 55 0911.10.10.00 J10 12 0911.58.10.00 C41 12 0912.10.35.00 C10 7 0915.14.88.00 D65 24
0911.10.08.00 J51 41 0911.10.12.00 E10 16 0911.58.10.00 C75 16 0912.10.36.00 C40 15 0915.40.21.00 H20 16
0911.10.08.00 J51 44 0911.10.12.00 G20 13 0911.58.10.00 C81 26 0912.10.36.00 C41 15 0915.40.32.00 H25 25
0911.10.08.00 J56 48 0911.10.12.00 G32 7 0911.58.10.00 K10 14 0912.10.45.00 H60 6 0915.50.93.00 H60 11
0911.10.08.00 J56 51 0911.10.12.00 G34 7 0911.58.12.00 C41 18 0912.10.61.00 C50 21 0915.50.95.00 B40 15
0911.10.08.00 J61 51 0911.10.12.00 H10 15 0911.85.08.00 G10 19 0912.10.61.00 C55 21 0915.50.95.00 H55 10
0911.10.08.00 J66 51 0911.10.12.00 H15 19 0911.85.08.00 G32 6 0912.10.61.00 C60 21 0915.51.35.00 C20 6
0911.10.08.00 J71 51 0911.10.12.00 H56 5 0911.85.08.00 G34 6 0912.15.29.00 H65 9 0915.51.50.00 H70 17
0911.10.08.00 J78 15 0911.10.12.00 H60 14 0911.85.08.00 G50 7 0912.15.32.00 H25 4 0915.51.50.00 J81 50
0911.10.08.00 J81 38 0911.10.12.00 K10 9 0911.85.08.00 G50 13 0912.15.40.00 H25 9 0915.51.58.00 C27 6
0911.10.08.00 J81 58 0911.10.16.00 E10 27 0911.85.08.00 G60 8 0912.15.40.00 H30 3 0915.51.58.00 H25 15
0911.10.08.00 J85 5 0911.10.16.00 H50 14 0911.85.08.00 G60 11 0912.15.40.00 H30 16 0915.51.58.00 J78 6
0911.10.08.00 J85 15 0911.10.16.00 H65 22 0911.85.08.00 G70 11 0912.15.42.00 H26 32 0915.51.58.00 J85 6
0911.10.08.00 K10 16 0911.30.10.00 B20 4 0911.85.08.00 G70 14 0912.15.52.00 H65 2 0915.51.61.00 J10 28
K11 H60 G72 G25 B40
L6
PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO.
0915.51.89.00 C75 5 0916.11.36.00 B40 22 0920.15.35.00 B40 2 0922.18.35.00 C65 10 0925.12.71.00 D65 19
0915.51.89.00 C80 10 0916.11.36.00 C30 5 0920.21.27.00 B10 1 0922.18.35.00 C70 10 0925.12.72.00 D65 20
0915.52.18.00 C35 14 0916.11.36.00 C35 10 0920.39.90.00 H20 6 0922.18.40.00 H26 33 0925.14.36.00 G25 3
0915.52.18.00 C75 3 0916.11.36.00 J10 31 0920.39.90.00 H20 25 0922.18.44.00 C50 10 0925.14.38.00 G25 6
0915.52.18.00 C80 4 0916.11.53.00 A45 19 0920.70.14.00 H55 11 0922.18.44.00 C55 10 0925.14.50.00 C45 7
0915.52.42.00 A40 17 0916.21.04.00 B70 4 0920.70.22.00 B60 3 0922.18.44.00 C60 10 0925.24.12.00 J25 1
0915.52.77.00 C75 5 0916.21.04.00 C30 8 0920.70.23.00 B60 2 0922.18.45.00 C50 7 0925.24.70.00 E30 5
0915.52.77.00 C80 10 0916.21.04.00 C35 12 0920.70.24.00 E10 11 0922.18.45.00 C55 7 0925.24.88.00 E30 10
0915.52.84.00 B70 7 0916.21.04.00 H51 38 0920.70.24.00 E10 21 0922.18.45.00 C60 7 0925.24.91.00 E30 9
0915.53.47.00 C75 3 0916.21.04.00 H61 45 0921.11.99.00 J20 28 0922.20.19.00 H60 4 0925.24.94.00 H61 58
0915.53.47.00 C80 4 0916.21.04.00 H62 9 0922.10.33.00 D65 12 0922.28.10.00 H60 19 0925.33.63.00 H50 16
0915.54.37.00 C65 8 0916.21.05.00 C25 4 0922.10.34.00 D65 11 0922.40.08.00 G25 5 0925.33.65.00 C30 4
WELGER RP 405 / RP 435
0915.54.37.00 C70 8 0916.21.05.00 C27 13 0922.12.47.00 C45 9 0922.40.10.00 G10 8 0925.33.65.00 C35 16
0915.54.37.00 C70 16 0917.10.52.00 H55 14 0922.12.48.00 C45 10 0922.40.10.00 G70 8 0925.33.70.00 B75 7
0915.61.28.00 C75 8 0917.30.82.00 H26 35 0922.12.51.00 H25 3 0922.50.08.00 D65 13 0925.33.70.00 G10 3
0915.61.28.00 C80 16 0917.31.25.00 A40 22 0922.12.53.00 H50 18 0922.51.49.00 D65 14 0925.33.70.00 G10 14
0916.10.43.00 H55 15 0917.31.43.00 B60 14 0922.12.54.00 H25 8 0922.78.27.00 G25 8 0925.33.70.00 G30 8
0916.10.95.00 H26 36 0917.31.43.00 B70 9 0922.12.54.00 H30 15 0922.93.19.00 H60 30 0925.33.70.00 G32 8
0916.10.95.00 K10 20 0917.31.49.01 A40 23 0922.12.54.00 H50 7 0924.20.20.00 H30 11 0925.33.70.00 G50 14
0916.10.97.00 A40 26 0917.41.34.00 C75 20 0922.12.69.00 G20 8 0924.20.22.00 C27 2 0925.33.70.00 G70 4
0916.10.97.00 B20 8 0917.41.34.00 C81 31 0922.12.69.00 G25 16 0924.20.22.00 C75 15 0925.33.70.00 G72 4
0916.10.97.00 H55 21 0917.50.88.00 H55 20 0922.12.71.00 D65 10 0924.20.22.00 C81 25 0925.38.24.00 H50 4
0916.10.99.00 B60 16 0917.51.55.00 B20 5 0922.12.71.00 G20 3 0924.20.27.00 C41 11 0925.40.16.00 D65 27
0916.10.99.00 B70 10 0917.51.55.00 B70 3 0922.12.72.00 D65 9 0924.20.31.00 C20 16 0925.40.18.00 J10 25
0916.10.99.00 C75 22 0917.51.82.00 B60 11 0922.12.92.00 G60 5 0924.20.49.00 C20 23 0925.40.22.00 A32 6
0916.10.99.00 C81 33 0917.51.82.00 H61 53 0922.12.93.00 G60 3 0924.20.50.00 C41 17 0925.40.22.00 A32 6
0916.11.12.00 A45 8 0917.52.67.00 J10 29 0922.12.95.00 B75 4 0924.20.60.00 C40 11 0925.40.22.00 A32 6
0916.11.12.00 B50 4 0917.52.72.00 B40 20 0922.12.95.00 G10 4 0924.20.73.00 C50 6 0926.10.01.00 A15 19
0916.11.12.00 H61 52 0917.62.44.00 J20 25 0922.12.95.00 G30 3 0924.20.73.00 C55 6 0926.10.03.00 C35 3
0916.11.12.00 H61 62 0917.62.44.00 J25 29 0922.12.95.00 G32 3 0924.20.73.00 C60 6 0926.10.12.00 C50 8
0916.11.14.00 B60 13 0918.19.13.00 B20 27 0922.12.95.00 G34 3 0924.20.75.00 C50 9 0926.10.12.00 C50 11
0916.11.14.00 C65 23 0919.71.16.00 B70 11 0922.12.95.00 G40 3 0924.20.75.00 C55 9 0926.10.12.00 C55 8
0916.11.14.00 C70 24 0919.71.28.00 J78 17 0922.12.95.00 G50 3 0924.20.75.00 C60 9 0926.10.12.00 C55 11
0916.11.14.00 C75 24 0919.71.28.00 J85 17 0922.12.95.00 G50 5 0924.21.20.00 H50 27 0926.10.12.00 C60 8
0916.11.14.00 C81 35 0919.71.29.00 J78 19 0922.12.95.00 G70 3 0924.51.19.00 H26 39 0926.10.12.00 C60 11
0916.11.14.00 J36 42 0919.71.29.00 J85 19 0922.12.95.00 G72 2 0924.52.11.00 E11 37 0926.10.16.00 A15 20
0916.11.14.00 J46 50 0919.88.01.00 H65 14 0922.12.95.00 G72 8 0924.53.60.00 H30 28 0926.10.41.00 B10 2
0916.11.14.00 J56 46 0919.88.01.00 H70 12 0922.18.03.00 C20 8 0924.53.62.00 H20 8 0926.10.41.00 B40 8
0916.11.14.00 J61 49 0920.10.62.00 H55 25 0922.18.18.00 H65 9 0924.53.62.00 H30 27 0926.10.41.00 C80 6*
J66 49 B70 C20 H50 C80
L7
PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO.
0926.10.41.00 J85 3 0930.22.61.00 D30 8 0930.33.83.00 D15 25 0930.40.37.00 D25 23 0930.45.53.00 D25 18
0926.60.17.00 E20 1 0930.23.12.00 D05 5 0930.33.83.00 D20 25 0930.40.38.00 D15 23 0930.45.53.00 D30 18
0926.60.27.00 E20 2 0930.23.12.00 D10 5 0930.33.83.00 D25 25 0930.40.38.00 D20 23 0930.46.18.00 D66 31
0926.60.44.00 E30 15* 0930.23.12.00 D15 5 0930.33.83.00 D30 25 0930.41.39.00 D05 2 0930.49.02.00 D05 19
0926.60.45.00 E30 1-10 0930.23.13.00 D20 5 0930.33.93.00 D05 27 0930.41.39.00 D10 2 0930.49.02.00 D10 19
0926.60.46.00 E30 1 0930.23.13.00 D25 5 0930.33.93.00 D10 27 0930.41.39.00 D15 2 0930.49.02.00 D15 19
0926.60.67.00 E30 6 0930.23.13.00 D30 5 0930.33.93.00 D15 27 0930.41.39.00 D20 2 0930.49.02.00 D20 19
0926.60.68.00 E30 7 0930.26.73.00 D05 9 0930.33.93.00 D20 27 0930.41.39.00 D25 2 0930.49.02.00 D25 19
0926.60.70.00 E30 8 0930.26.73.00 D10 9 0930.33.93.00 D25 27 0930.41.39.00 D30 2 0930.49.02.00 D30 19
0926.76.13.00 D65 26 0930.26.73.00 D15 9 0930.33.93.00 D30 27 0930.41.52.00 D05 4 0930.49.03.00 D05 31
0926.81.37.00 E35 3 0930.26.73.00 D20 9 0930.34.23.00 C40 2-11 0930.41.52.00 D10 4 0930.49.03.00 D10 31
0926.81.37.00 E35 8 0930.26.73.00 D25 9 0930.34.23.00 C41 2-11 0930.41.52.00 D15 4 0930.49.03.00 D15 31
WELGER RP 405 / RP 435
0926.81.37.00 G25 12 0930.26.73.00 D30 9 0930.34.29.00 C40 2-11 0930.41.53.00 D20 4 0930.49.03.00 D20 31
0926.81.37.00 G70 12 0930.28.09.00 D05 7 0930.34.82.00 G72 13 0930.41.53.00 D25 4 0930.49.03.00 D25 31
0926.81.38.00 E35 5 0930.28.09.00 D10 7 0930.34.83.00 G72 14 0930.41.53.00 D30 4 0930.49.03.00 D30 31
0926.81.80.00 E20 3 0930.28.09.00 D15 7 0930.35.80.00 D05 20 0930.42.79.00 D05 14 0930.50.40.00 D05 12
0926.81.81.00 E20 4 0930.28.09.00 D20 7 0930.35.80.00 D10 20 0930.42.79.00 D10 14 0930.50.40.00 D05 16
0928.30.13.00 H25 13 0930.28.09.00 D25 7 0930.35.80.00 D15 20 0930.42.79.00 D15 14 0930.50.40.00 D10 12
0930.13.39.00 D05 1-31 0930.28.09.00 D30 7 0930.35.80.00 D20 20 0930.42.79.00 D20 14 0930.50.40.00 D10 16
0930.13.40.00 D10 1-31 0930.29.02.00 C40 3 0930.35.80.00 D25 20 0930.42.79.00 D25 14 0930.50.40.00 D15 12
0930.13.41.00 D15 1-31 0930.29.02.00 C41 3 0930.35.80.00 D30 20 0930.42.79.00 D30 14 0930.50.40.00 D15 16
0930.13.42.00 D20 1-31 0930.32.62.00 D05 17 0930.37.04.00 C40 4 0930.42.80.00 D05 13 0930.50.40.00 D20 12
0930.13.43.00 D25 1-31 0930.32.62.00 D10 17 0930.37.05.00 C40 4 0930.42.80.00 D10 13 0930.50.40.00 D20 16
0930.13.44.00 D30 1-31 0930.32.62.00 D15 17 0930.37.05.00 C41 4 0930.42.80.00 D15 13 0930.50.40.00 D25 12
0930.13.45.00 D50 1-19 0930.32.62.00 D20 17 0930.37.12.00 D05 30 0930.42.80.00 D20 13 0930.50.40.00 D25 16
0930.13.46.00 D60 1-19 0930.32.62.00 D25 17 0930.37.12.00 D10 30 0930.42.80.00 D25 13 0930.50.40.00 D30 12
0930.20.14.00 D05 21 0930.32.62.00 D30 17 0930.37.12.00 D15 30 0930.42.80.00 D30 13 0930.50.40.00 D30 16
0930.20.14.00 D10 21 0930.33.40.00 C40 5 0930.37.12.00 D20 30 0930.45.50.00 D05 1 0930.50.44.00 D05 3
0930.20.14.00 D15 21 0930.33.40.00 C41 5 0930.37.12.00 D25 30 0930.45.50.00 D10 1 0930.50.44.00 D10 3
0930.20.14.00 D20 21 0930.33.54.00 D05 26 0930.37.12.00 D30 30 0930.45.50.00 D15 1 0930.50.44.00 D15 3
0930.20.14.00 D25 21 0930.33.54.00 D10 26 0930.38.28.00 D05 22 0930.45.50.00 D20 1 0930.50.44.00 D20 3
0930.20.14.00 D30 21 0930.33.54.00 D15 26 0930.38.28.00 D10 22 0930.45.50.00 D25 1 0930.50.44.00 D25 3
0930.20.22.00 D05 6 0930.33.54.00 D20 26 0930.38.28.00 D15 22 0930.45.50.00 D30 1 0930.50.44.00 D30 3
0930.20.22.00 D10 6 0930.33.54.00 D25 26 0930.38.28.00 D20 22 0930.45.51.00 D05 11 0930.53.48.00 D05 15-19
0930.20.22.00 D15 6 0930.33.54.00 D30 26 0930.38.28.00 D25 22 0930.45.51.00 D10 11 0930.53.48.00 D05 15
0930.20.22.00 D20 6 0930.33.82.00 D05 24 0930.38.28.00 D30 22 0930.45.51.00 D15 11 0930.53.48.00 D10 15-19
0930.20.22.00 D25 6 0930.33.82.00 D10 24 0930.40.21.00 C40 6 0930.45.51.00 D20 11 0930.53.48.00 D10 15
0930.20.22.00 D30 6 0930.33.82.00 D15 24 0930.40.21.00 C41 6 0930.45.51.00 D25 11 0930.53.48.00 D15 15-19
0930.22.61.00 D05 8 0930.33.82.00 D20 24 0930.40.22.00 C40 7 0930.45.51.00 D30 11 0930.53.48.00 D15 15
D10 D25 C41 D05 D20
L8
PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO.
0930.53.48.00 D30 15-19 0930.84.59.00 D60 23 0930.85.41.00 D50 2 0933.75.16.00 G80 5 0934.99.04.00 C56 30
0930.53.48.00 D30 15 0930.84.60.00 D60 22 0930.85.42.00 D35 3 0933.75.87.00 G80 4 0934.99.04.00 C61 30
0930.53.89.00 D05 10 0930.84.61.00 D50 2 0930.85.42.00 D40 3 0933.75.88.00 G80 3 0934.99.11.00 E11 36
0930.53.89.00 D10 10 0930.84.61.00 D60 2 0930.85.42.00 D45 3 0934.15.15.00 H25 17 0934.99.11.00 H65 7
0930.53.89.00 D15 10 0930.84.61.00 D60 24 0930.85.42.00 D50 3 0934.15.65.00 H25 18 0935.11.10.00 H61 54
0930.53.89.00 D20 10 0930.84.63.00 D60 15 0930.85.43.00 D35 4 0934.15.81.00 H25 19 0935.12.03.00 H51 27
0930.53.89.00 D25 10 0930.84.64.00 D60 26 0930.85.43.00 D40 4 0934.17.03.00 C40 14 0935.13.19.00 C25 11
0930.53.89.00 D30 10 0930.84.65.00 D60 25 0930.85.43.00 D45 4 0934.17.03.00 C41 14 0935.13.19.00 C27 15
0930.80.45.00 D35 1-14 0930.84.66.00 D60 27 0930.85.43.00 D50 4 0934.17.28.00 C10 10 0935.14.10.00 C15 18
0930.80.46.00 D40 1-14 0930.84.72.00 D50 2 0930.85.44.00 D35 5 0934.17.40.00 C10 23 0935.51.04.00 H61 36
0930.80.47.00 D45 1-14 0930.84.72.00 D60 2 0930.85.44.00 D40 5 0934.18.19.00 E10 8 0936.10.07.00 J78 16
0930.80.49.00 D50 1-14 0930.84.73.00 D50 4 0930.85.44.00 D45 5 0934.18.30.00 C51 35 0936.10.07.00 J85 16
WELGER RP 405 / RP 435
0930.84.01.00 D50 18 0930.84.73.00 D60 4 0930.85.44.00 D50 5 0934.18.30.00 C56 35 0936.55.73.00 A45 10
0930.84.03.00 D50 3 0930.84.74.00 D50 1 0930.85.45.00 D35 6 0934.18.43.00 C61 35 0936.69.17.00 A45 9
0930.84.03.00 D60 3 0930.84.74.00 D60 1 0930.85.45.00 D40 6 0934.18.47.00 C51 35 0936.73.55.00 B40 18
0930.84.05.00 D50 5 0930.84.75.00 D50 8 0930.85.45.00 D45 6 0934.18.47.00 C56 35 0936.91.06.00 A45 12
0930.84.05.00 D60 5 0930.84.75.00 D60 8 0930.85.45.00 D50 6 0934.18.48.00 C61 35 0936.94.24.00 A45 11
0930.84.06.00 D50 6 0930.84.76.00 D50 9 0930.85.46.00 D45 8-11 0934.19.50.00 E10 6 0936.99.83.00 H25 20
0930.84.06.00 D60 6 0930.84.76.00 D60 9 0930.85.47.00 D35 8-11 0934.60.51.00 E10 7* 0936.99.84.00 H25 21
0930.84.07.00 D50 7 0930.85.20.00 D35 7 0930.85.48.00 D35 12 0934.60.90.00 C61 36* 0937.19.03.00 C25 5
0930.84.07.00 D60 7 0930.85.20.00 D40 7 0930.85.48.00 D40 12 0934.60.94.00 C61 36* 0937.19.03.00 C27 14
0930.84.09.00 D50 10 0930.85.20.00 D45 7 0930.85.48.00 D45 12 0934.60.96.00 C51 36* 0937.19.03.00 C30 9
0930.84.09.00 D60 10 0930.85.20.00 D50 7 0930.85.48.00 D50 12 0934.60.96.00 C56 36* 0937.19.03.00 C35 13
0930.84.10.00 D50 12 0930.85.22.00 D40 8-11 0930.85.49.00 D35 13 0934.60.99.00 C51 36* 0937.19.03.00 H62 10
0930.84.10.00 D60 12 0930.85.22.00 D50 8-11 0930.85.49.00 D40 13 0934.60.99.00 C56 36* 0937.19.11.00 C25 4+5
0930.84.11.00 D50 11 0930.85.30.00 D40 8 0930.85.49.00 D45 13 0934.65.07.00 C61 37* 0937.19.11.00 C27 13-14
0930.84.11.00 D60 11 0930.85.30.00 D50 8 0930.85.50.00 D35 8 0934.65.07.00 E10 9* 0937.19.11.00 H15 14
0930.84.12.00 D50 13 0930.85.31.00 D40 9 0930.85.50.00 D45 8 0934.65.08.00 C51 37* 0937.19.17.00 H61 46
0930.84.12.00 D60 13 0930.85.31.00 D50 9 0930.85.51.00 D35 9 0934.65.08.00 C56 37* 0937.28.99.00 H61 55
0930.84.18.00 D50 16 0930.85.32.00 D35 10 0930.85.53.00 D45 9 0934.65.10.00 E10 7* 0937.51.59.00 B20 9
0930.84.18.00 D60 19 0930.85.32.00 D40 10 0930.85.54.00 D35 14 0934.65.26.00 C61 37* 0937.51.64.00 B20 12
0930.84.20.00 D50 17 0930.85.32.00 D45 10 0930.85.54.00 D40 14 0934.65.28.00 C51 37* 0937.51.88.00 B20 10
0930.84.20.00 D60 16 0930.85.32.00 D50 10 0930.85.54.00 D45 14 0934.65.28.00 C56 37* 0937.60.44.00 A40 28
0930.84.38.00 D50 14-19 0930.85.33.00 D35 11 0930.85.78.00 D50 13 0934.71.20.00 H25 14 0938.16.01.00 H10 3
0930.84.46.00 D50 15 0930.85.33.00 D40 11 0930.85.82.00 D50 1 0934.71.21.00 H25 7 0938.20.10.00 K10 21
0930.84.47.00 D50 14 0930.85.33.00 D45 11 0930.85.83.00 D50 14 0934.73.09.00 C40 9 0938.31.54.00 H15 4
0930.84.53.00 D50 19 0930.85.33.00 D50 11 0930.99.04.00 H30 2 0934.73.09.00 C41 9 0938.31.54.00 K15 3
0930.84.53.00 D60 17 0930.85.40.00 D35 1 0933.11.05.00 E11 35 0934.74.67.00 C50 19 0938.31.54.00 K16 3
0930.84.54.00 D60 14-27 0930.85.40.00 D40 1 0933.11.32.00 H65 11 0934.74.67.00 C55 19 0938.31.54.00 K17 3
D60 D45 H65 E10 J76
L9
PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO.
0938.90.28.00 G60 12 0940.52.25.00 C20 13 0942.41.72.00 A10 8 0948.10.05.00 F21 46* 0952.26.06.00 J30 3
0938.90.28.00 G70 15 0940.64.73.00 K15 8 0942.41.73.00 A10 10 0948.11.22.00 F21 47* 0952.26.06.00 J31 10
0938.90.28.00 G72 12 0940.64.73.00 K16 8 0944.11.22.00 A20 1-3 0948.11.25.00 F21 48* 0952.26.06.00 J35 3
0938.90.28.00 H50 10 0940.64.73.00 K17 8 0944.11.23.00 A20 1-3 0948.12.08.00 F21 49* 0952.26.06.00 J40 10
0938.96.17.00 E30 14 0940.88.06.00 H20 19 0944.11.47.00 A20 4+5 0948.16.02.00 F21 50* 0952.26.06.00 J45 10
0938.96.60.00 B10 8 0940.88.11.00 J78 21 0944.11.48.00 A20 4+5 0948.90.05.00 H65 4a* 0952.26.06.00 J50 10
0938.96.74.00 K25 5* 0940.91.69.00 B70 16 0944.11.50.00 A20 8+9 0951.11.12.00 J30 19 0952.26.06.00 J55 10
0938.98.56.00 C25 2 0940.91.69.00 B75 14 0944.11.54.00 A20 6+7 0951.11.12.00 J31 1 0952.26.06.00 J60 14
0938.98.56.00 C27 7 0940.91.70.00 H10 6 0944.13.53.00 A20 10+11 0951.11.12.00 J36 39 0952.26.06.00 J65 14
0938.98.59.00 H10 5 0940.91.70.00 K11 30 0944.13.54.00 A20 10+11 0951.11.12.00 J40 1 0952.26.06.00 J70 14
0939.13.07.00 K10 4 0940.91.70.00 K15 6 0944.21.23.00 A20 1 0951.11.12.00 J45 1 0952.27.10.00 J63 5*
0939.50.49.00 H60 13 0940.91.70.00 K16 6 0944.21.25.00 A20 1 0951.11.12.00 J50 1 0952.58.14.00 J20 1
WELGER RP 405 / RP 435
0940.10.71.00 H11 20 0940.91.70.00 K17 6 0944.21.50.00 A20 8 0951.11.12.00 J55 1 0952.58.21.00 J63 4
0940.10.71.00 H16 24 0940.91.73.00 C65 5 0944.21.51.00 A20 4 0951.11.12.00 J60 1 0952.58.29.00 J63 3
0940.10.71.00 H20 21 0940.91.73.00 C70 5 0944.21.54.00 A20 6 0951.11.12.00 J65 1 0952.58.30.00 J60 8
0940.10.71.00 H60 9 0940.91.74.00 C51 31 0944.29.20.00 A20 10 0951.11.12.00 J70 1 0952.58.30.00 J63 1-11
0940.10.71.00 H61 44 0940.91.74.00 C56 31 0944.30.86.00 A20 2* 0951.11.51.00 J15 3 0952.58.30.00 J65 8
0940.16.24.00 J30 23 0940.91.74.00 C61 31 0944.52.21.00 A20 3 0951.11.66.00 J36 40 0952.58.30.00 J70 8
0940.16.24.00 J31 5 0940.96.03.00 K10 15 0944.52.50.00 A20 5 0951.11.66.00 J46 48 0952.58.35.00 J63 6-8
0940.16.24.00 J36 38 0942.40.10.00 A10 1-10 0944.52.50.00 A20 9 0951.11.66.00 J56 44 0952.58.36.00 J63 9-11
0940.16.24.00 J40 5 0942.40.14.00 A15 1-21 0944.52.53.00 A20 7 0951.11.66.00 J61 47 0952.58.37.00 J63 2
0940.16.24.00 J45 5 0942.40.27.00 A15 3 0944.52.56.00 A20 11 0951.11.66.00 J66 47 0952.58.38.00 J63 1
0940.16.24.00 J50 5 0942.40.28.00 A10 2-5 0944.90.92.00 C30 2 0951.11.66.00 J71 47 0952.58.39.00 J20 1
0940.16.24.00 J55 5 0942.40.53.00 A15 4 0944.90.92.00 C35 5 0951.11.76.00 A40 15 0952.58.39.00 J63 7
0940.16.24.00 J60 5 0942.40.55.00 A10 3 0944.90.94.00 C30 6 0951.11.91.00 C75 19 0952.58.39.00 J63 10
0940.16.24.00 J65 5 0942.40.57.00 A15 5 0944.92.15.00 B30 8 0951.11.91.00 C81 29 0952.58.40.00 J63 6
0940.16.24.00 J70 5 0942.40.59.00 A10 4 0944.92.50.00 B30 15 0951.11.93.00 J10 26 0952.58.41.00 J63 9
0940.17.44.00 B70 18 0942.40.60.00 A10 5 0944.92.74.00 B30 4 0951.11.95.00 J20 17 0952.58.42.00 J40 25
0940.20.48.00 H55 9 0942.40.66.00 A10 6 0944.92.75.00 B30 5 0951.11.95.00 J25 17 0952.58.42.00 J50 25
0940.22.77.00 A40 27 0942.41.34.00 A15 14 0944.92.83.00 B30 6 0951.11.98.00 J20 5 0952.58.43.00 J45 25
0940.22.78.00 B40 16 0942.41.36.00 A15 13 0944.92.89.00 B30 16 0951.11.98.00 J25 5 0952.58.43.00 J55 25
0940.22.78.00 K11 27 0942.41.42.00 A10 9 0944.93.43.00 B30 9 0951.11.99.00 J25 32 0952.58.44.00 J63 8
0940.23.31.00 H30 26 0942.41.48.00 A15 11 0944.93.55.00 B30 11 0952.13.03.00 J10 7 0952.58.44.00 J63 11
0940.23.31.00 H50 26 0942.41.49.00 A15 10 0944.94.10.00 B30 1-18 0952.13.03.00 J30 6 0952.60.77.00 J20 1
0940.23.47.00 B40 17 0942.41.50.00 A15 9 0944.94.11.00 B30 13 0952.13.03.00 J31 13 0952.60.88.00 J25 1
0940.23.47.00 H61 35 0942.41.51.00 A15 8 0944.94.12.00 B30 18 0952.13.03.00 J35 6 0952.60.91.00 J25 1
0940.23.87.00 H55 24 0942.41.56.00 A15 17 0944.94.13.00 B30 1 0952.13.03.00 J40 13 0952.61.21.00 J10 32
0940.24.54.00 B75 10 0942.41.62.00 A15 2 0944.94.14.00 B30 3 0952.13.03.00 J45 13 0952.62.39.00 J10 23
0940.29.87.00 B40 9 0942.41.63.00 A15 6 0944.94.15.00 B30 7 0952.13.03.00 J50 13 0952.71.03.00 J20 23
L 10
0940.29.87.00 E10 23 0942.41.64.00 A15 12 0944.94.16.00 B30 14 0952.13.03.00 J55 13 0952.71.03.00 J25 23
0940.34.91.00 J78 7 0942.41.65.00 A15 15 0944.94.17.00 B30 2 0952.13.03.00 J60 17 0952.71.04.00 J20 22
0940.34.92.00 H55 30 0942.41.66.00 A15 16 0944.94.18.00 B30 12 0952.13.03.00 J65 17 0952.71.04.00 J25 22
0940.34.92.00 J85 7 0942.41.71.00 A10 7 0944.94.19.00 B30 17 0952.13.03.00 J70 17 0952.71.84.00 J20 21
TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR.
PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR.
04.09
PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO.
0952.71.88.00 J25 21 0954.12.55.00 J15 2 0954.60.65.00 J31 21 0955.12.90.00 J45 32 0955.34.04.00 J30 10
0952.71.89.00 J25 26 0954.12.66.00 J10 3 0954.60.65.00 J36 43 0955.12.90.00 J60 27 0955.34.04.00 J31 18
0953.22.05.00 J20 9 0954.12.84.00 J30 7 0954.60.65.00 J41 46 0955.14.67.00 J30 9 0955.34.04.00 J35 18
0953.22.05.00 J25 9 0954.12.84.00 J31 14 0954.60.65.00 J46 51 0955.14.67.00 J35 10 0955.34.04.00 J40 19
0953.22.06.00 J41 36 0954.12.84.00 J35 7 0954.60.65.00 J51 40 0955.14.67.00 J40 17 0955.34.04.00 J45 19
0953.22.06.00 J46 36 0954.12.84.00 J40 14 0954.60.65.00 J56 47 0955.14.67.00 J45 17 0955.34.04.00 J50 19
0953.22.06.00 J51 35 0954.12.84.00 J45 14 0954.60.65.00 J61 50 0955.14.67.00 J50 17 0955.34.04.00 J55 19
0953.22.06.00 J56 35 0954.12.84.00 J50 14 0954.60.65.00 J66 50 0955.14.67.00 J55 17 0955.34.04.00 J61 42
0953.22.06.00 J60 28 0954.12.84.00 J55 14 0954.60.65.00 J71 50 0955.14.67.00 J60 30 0955.34.04.00 J66 42
0953.22.06.00 J65 28 0954.12.84.00 J60 18 0954.62.05.00 J75 11 0955.14.67.00 J65 30 0955.34.04.00 J71 42
0954.11.05.00 J41 43 0954.12.84.00 J65 18 0954.62.05.00 J80 19 0955.14.67.00 J70 30 0955.36.05.00 J10 4
0954.11.05.00 J51 39 0954.12.84.00 J70 18 0954.62.42.00 E20 5 0955.16.67.00 A40 7 0955.36.05.00 J31 15
WELGER RP 405 / RP 435
0954.12.06.00 A40 19 0954.20.55.00 J20 19 0954.62.42.00 H15 11 0955.16.67.00 J20 4 0955.36.05.00 J40 15
0954.12.06.00 J31 17 0954.20.55.00 J25 19 0954.62.44.00 A40 9 0955.16.67.00 J25 4 0955.36.05.00 J45 15
0954.12.06.00 J61 41 0954.20.93.00 J10 9 0954.62.46.00 H21 10 0955.16.67.00 J35 23 0955.36.05.00 J50 15
0954.12.06.00 J66 41 0954.20.94.00 J10 21 0954.67.03.00 E30 4 0955.16.67.00 J40 30 0955.36.05.00 J55 15
0954.12.06.00 J71 41 0954.21.32.00 A40 3 0955.10.57.00 J15 4 0955.16.67.00 J45 30 0955.36.08.00 J20 6
0954.12.12.00 J46 43 0954.31.04.00 A40 1 0955.10.67.00 A40 2 0955.16.67.00 J50 30 0955.36.08.00 J25 6
0954.12.12.00 J56 39 0954.31.20.00 J10 1 0955.10.67.00 J20 8 0955.16.67.00 J55 30 0955.36.08.00 J25 12
0954.12.18.00 J30 13 0954.31.20.00 J35 11 0955.10.67.00 J25 8 0955.16.67.00 J60 25 0955.38.13.00 J15 7
0954.12.18.00 J35 17 0954.31.20.00 J40 26 0955.10.67.00 J40 20 0955.16.67.00 J65 25 0955.38.13.00 J20 12
0954.12.18.00 J35 21 0954.31.20.00 J45 26 0955.10.67.00 J45 20 0955.16.67.00 J70 25 0955.38.13.00 J25 25
0954.12.18.00 J35 25 0954.31.20.00 J50 26 0955.10.67.00 J50 20 0955.20.12.00 J10 20 0955.38.13.00 J30 11
0954.12.18.00 J35 28 0954.31.20.00 J55 26 0955.10.67.00 J55 20 0955.21.05.00 J10 15 0955.38.13.00 J35 15
0954.12.18.00 J36 30 0954.31.20.00 J60 21 0955.12.23.00 A40 18 0955.21.05.00 J20 15 0955.56.14.00 J30 2
0954.12.18.00 J36 32 0954.31.20.00 J65 21 0955.12.23.00 J20 2 0955.21.05.00 J25 15 0955.56.14.00 J31 9
0954.12.18.00 J40 18 0954.31.20.00 J70 21 0955.12.23.00 J25 2 0955.31.06.00 J25 28 0955.56.14.00 J35 2
0954.12.18.00 J45 18 0954.31.22.00 J30 1 0955.12.23.00 J30 14 0955.31.24.00 J10 22 0955.56.14.00 J40 9
0954.12.18.00 J50 18 0954.31.22.00 J31 8 0955.12.23.00 J31 19 0955.31.24.00 J35 26 0955.56.14.00 J45 9
0954.12.18.00 J55 18 0954.31.22.00 J35 1 0955.12.23.00 J35 19 0955.31.24.00 J41 37 0955.56.14.00 J50 9
0954.12.18.00 J60 31 0954.31.22.00 J40 8 0955.12.23.00 J40 20a 0955.31.24.00 J46 37 0955.56.14.00 J55 9
0954.12.18.00 J65 31 0954.31.22.00 J45 8 0955.12.23.00 J45 20a 0955.31.24.00 J51 36 0955.56.14.00 J60 13
0954.12.18.00 J70 31 0954.31.22.00 J50 8 0955.12.23.00 J50 20a 0955.31.24.00 J56 36 0955.56.14.00 J65 13
0954.12.19.00 J35 28 0954.31.22.00 J55 8 0955.12.23.00 J55 20a 0955.31.24.00 J61 32 0955.56.14.00 J70 13
0954.12.19.00 J36 30 0954.31.22.00 J60 12 0955.12.23.00 J60 23 0955.31.24.00 J66 32 0955.60.33.00 J30 4
0954.12.19.00 J41 45 0954.31.22.00 J65 12 0955.12.23.00 J61 43 0955.31.24.00 J71 32 0955.60.33.00 J31 11
0954.12.19.00 J46 45 0954.31.22.00 J70 12 0955.12.23.00 J65 23 0955.31.27.00 J60 20 0955.60.33.00 J35 4
0954.12.19.00 J56 41 0954.31.61.00 J15 1 0955.12.23.00 J66 43 0955.31.27.00 J65 20 0955.60.33.00 J40 11
0954.12.20.00 J61 37 0954.31.68.00 J35 12 0955.12.23.00 J70 23 0955.31.27.00 J70 20 0955.60.33.00 J41 35
L 11
0954.12.20.00 J66 37 0954.60.04.00 A40 10 0955.12.23.00 J71 43 0955.34.04.00 A40 6 0955.60.33.00 J45 11
0954.12.20.00 J71 37 0954.60.04.00 J36 48* 0955.12.67.00 A40 4 0955.34.04.00 J10 6 0955.60.33.00 J46 35
0954.12.30.00 J20 18 0954.60.04.00 J83 12* 0955.12.67.00 J35 8 0955.34.04.00 J15 5 0955.60.33.00 J50 11
0954.12.30.00 J25 18 0954.60.65.00 J30 16 0955.12.90.00 J40 32 0955.34.04.00 J25 33 0955.60.33.00 J51 34
TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR.
PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR.
04.09
PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO.
0955.60.33.00 J55 11 0955.96.08.00 J65 16 0972.38.14.00 J80 23 0974.20.38.00 J76 38 1257.52.12.24 C20 7-10
0955.60.33.00 J56 34 0955.96.08.00 J70 16 0972.38.15.00 H65 21 0974.20.38.00 J81 35 1257.52.12.25 C20 7
0955.60.33.00 J60 15 0960.14.86.00 A32 1-7 0972.38.15.00 J80 24 0974.20.38.00 K30 4 1257.52.12.36 C20 11
0955.60.33.00 J65 15 0960.14.88.00 A32 1-7 0972.38.48.00 H65 20 0974.20.83.00 J76 37 1257.52.12.40 C20 12
0955.60.33.00 J70 15 0960.14.89.00 A32 1-8 0972.38.48.00 J80 24 0974.20.83.00 J81 34 1257.52.13.38 C20 21
0955.75.09.00 J15 6 0960.15.23.00 A32 1 0972.38.51.00 J75 21 0974.20.83.00 K30 3 1257.52.15.02 C15 2
0955.75.09.00 J20 13 0960.15.29.00 A32 2 0972.38.51.00 J80 23 0974.30.05.00 J75 18 1257.52.15.08 C15 4
0955.75.09.00 J25 13 0960.15.34.00 A32 2 0972.38.70.00 J75 19 0974.30.05.00 J80 11 1257.52.15.13 C15 5
0955.75.09.00 J41 33 0960.15.35.00 A32 1 0972.38.70.00 J80 25 0974.41.01.00 K30 6 1257.52.15.26 C15 7
0955.75.09.00 J46 33 0960.15.36.00 A32 2 0972.38.71.00 J75 20 0974.46.01.00 K30 8 1257.52.16.52 C25 1
0955.75.09.00 J51 32 0960.15.37.00 A32 1 0972.38.71.00 J80 26 0974.46.09.00 K30 13 1257.52.19.18 C25 7
0955.75.09.00 J56 32 0960.15.50.00 A32 4 0972.40.20.00 J75 22 0980.14.14.00 K11 32 1257.52.19.22 C25 8
WELGER RP 405 / RP 435
0955.75.09.00 J60 26 0960.15.51.00 A32 8 0972.40.20.00 J80 22 0980.22.13.00 F10 2 1257.52.20.84 C35 4
0955.75.09.00 J65 26 0960.15.54.00 A32 4 0972.40.40.00 J80 4 0980.31.77.00 F10 1 1257.52.20.94 C35 6
0955.75.17.00 F10 5 0960.22.02.00 A32 5 0972.40.41.00 J80 5 0980.70.14.00 F10 6* 1257.52.20.95 C35 7
0955.75.17.00 J20 20 0960.22.02.00 A32 5 0972.40.43.00 J75 13 0980.70.21.00 F10 7* 1257.52.26.01 C15 9
0955.75.17.00 J25 20 0960.22.02.00 A32 5 0972.40.43.00 J80 15 0982.21.09.00 C75 13 1257.52.26.12 C15 10
0955.88.04.00 J10 5 0960.22.60.00 A32 4 0972.40.46.00 J80 6* 0982.21.09.00 C80 21 1257.52.26.25 C15 12
0955.88.04.00 J35 24 0970.10.08.00 H70 9 0972.40.49.00 J75 16 0982.40.01.00 H20 17 1257.52.26.40 C15 13
0955.88.04.00 J65 24 0970.10.09.00 H30 24 0972.40.49.00 J80 7 0994.10.21.00 A21 21 1257.52.26.58 C15 15
0955.88.04.00 J71 33 0971.25.64.00 J80 12 0972.46.01.00 J75 7 0994.10.25.00 A21 22 1257.52.26.70 C15 10-11
0955.91.10.00 J10 2 0971.25.84.00 J75 8 0972.46.01.00 J80 21 0996.62.77.03 C27 18 1257.52.26.74 C15 11
0955.91.10.00 J10 8 0971.30.91.00 J75 2 0972.46.01.00 K30 11 0996.62.77.08 C27 19 1712.08.03.14 B40 6
0955.91.10.00 J30 5 0971.31.01.00 J25 27 0972.46.02.00 K30 9 1133.42.02.69 C20 17+18 1712.08.05.35 H61 61
0955.91.10.00 J31 12 0971.31.11.00 J80 2 0972.52.10.00 J75 14 1133.42.02.70 C20 18 1712.34.02.21 H25 2-4
0955.91.10.00 J35 5 0971.32.24.00 H65 23 0972.52.10.00 J80 16 1246.09.03.17 J20 7 1712.34.03.14 H25 24
0955.91.10.00 J40 12 0971.39.07.00 J80 27 0972.52.11.00 J75 15 1246.09.03.17 J25 7 1712.34.03.17 H25 26
0955.91.10.00 J45 12 0971.41.55.00 J80 30 0972.52.11.00 J80 17 1257.35.03.01 C45 8 1712.37.01.62 H55 11+12
0955.91.10.00 J50 12 0971.42.22.00 J75 9 0972.62.12.00 E20 9 1257.41.01.18 C10 1 1712.37.01.64 H55 12
0955.91.10.00 J55 12 0971.42.22.00 J80 13 0972.62.12.00 J83 11* 1257.41.02.01 C10 9 1712.37.02.72 H55 6
0955.91.10.00 J60 16 0971.51.02.00 C75 14 0972.64.01.00 E20 8 1257.41.03.01 C10 5 1712.37.10.20 H60 23
0955.91.10.00 J65 16 0971.51.02.00 C80 22 0972.64.01.00 J83 10 1257.43.01.18 J30 22 1712.37.10.31 H60 26-33
0955.91.10.00 J70 16 0971.51.40.00 H21 11 0972.64.03.00 A40 14 1257.43.01.18 J31 4 1712.37.10.32 H60 26
0955.96.08.00 J10 2 0972.16.36.00 K30 10 0972.64.03.00 A45 20* 1257.43.01.18 J36 37 1712.37.10.39 H60 27
0955.96.08.00 J10 8 0972.16.86.00 K30 9-10 0972.64.03.00 J76 31 1257.43.01.18 J40 4 1712.37.10.49 H60 32
0955.96.08.00 J30 5 0972.20.40.00 J75 17 0972.64.11.00 E35 6* 1257.43.01.18 J45 4 1712.38.02.79 E11 38
0955.96.08.00 J31 12 0972.20.40.00 J80 10 0972.64.11.00 J83 9 1257.43.01.18 J50 4 1712.46.92.01 J10 23-25
0955.96.08.00 J35 5 0972.34.31.00 J80 4 0972.9.09.00 J80 16 1257.43.01.18 J55 4 1712.46.92.02 J10 24
0955.96.08.00 J40 12 0972.34.32.00 J80 4 0974.10.10.00 J76 36 1257.43.01.18 J60 4 1713.53.08.02 J30 20
L 12
0955.96.08.00 J45 12 0972.38.06.00 J75 3 0974.10.10.00 J81 32 1257.43.01.18 J65 4 1713.53.08.02 J31 2
0955.96.08.00 J50 12 0972.38.07.00 J75 4 0974.10.10.00 K30 2 1257.43.01.18 J70 4 1713.53.08.02 J36 33
0955.96.08.00 J55 12 0972.38.08.00 J75 5 0974.10.41.00 J76 32 1257.52.11.01 C15 1 1713.53.08.02 J40 2
0955.96.08.00 J60 16 0972.38.14.00 J75 21 0974.20.26.00 J76 33 1257.52.12.01 C20 1 1713.53.08.02 J45 2
TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR.
PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR.
04.09
PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO.
1713.53.08.02 J50 2 1722.58.37.08 H15 17 1724.27.11.01 H16 22 1724.52.07.36 C27 9 1724.53.18.01 C45 1
1713.53.08.02 J55 2 1722.58.37.08 J78 10 1724.27.11.04 H11 19 1724.52.07.38 C27 10 1724.53.31.01 C45 1
1713.53.08.02 J60 2 1722.58.37.08 J85 10 1724.27.11.04 H16 23 1724.52.07.44 C27 15-16 1724.53.32.42 C50 1
1713.53.08.02 J65 2 1724.05.10.01 B20 19 1724.34.01.02 H20 1 1724.52.07.45 C27 16 1724.53.32.47 C50 2
1713.53.08.02 J70 2 1724.05.12.01 B20 11 1724.34.02.22 H25 6-10 1724.52.07.53 C27 1 1724.53.33.28 C40 1
1721.03.15.08 B11 2 1724.05.19.28 B20 22 1724.34.02.23 H25 6 1724.52.35.13 C15 5 1724.53.33.28 C41 1
1721.03.15.09 B11 3 1724.12.01.09 D65 2 1724.34.04.01 H20 14-22 1724.52.36.01 C25 1 1724.53.33.35 C40 13
1721.14.07.22 E11 32 1724.12.01.13 D65 8 1724.34.04.03 H20 14 1724.52.37.01 C27 1-11 1724.53.33.37 C40 10
1721.14.07.22 G60 14 1724.12.07.10 D65 4 1724.34.04.10 H20 15 1724.52.37.18 C27 4 1724.53.33.37 C41 10
1721.25.04.09 E10 12 1724.12.08.01 D65 1-28 1724.34.04.17 H20 16-23 1724.52.37.38 C27 10 1724.53.36.25 C60 1
1721.39.01.29 H50 12 1724.12.08.08 D65 1 1724.34.04.18 H20 22 1724.52.37.53 C27 1 1724.53.39.36 C61 38-40
1721.39.01.30 H50 12-20 1724.12.08.10 D65 3 1724.34.04.25 H20 23 1724.52.38.03 C30 1 1724.53.39.42 C61 38
WELGER RP 405 / RP 435
1721.39.01.34 H50 13 1724.12.08.12 D65 5 1724.34.05.28 H30 14 1724.52.38.40 C30 7 1724.53.43.01 C60 16
1721.39.01.37 H50 15 1724.12.08.13 D65 6 1724.34.05.35 H30 18 1724.52.38.70 C30 10 1724.53.43.18 C60 19
1721.39.01.41 H50 19 1724.12.08.14 D65 7 1724.34.05.39 H30 20 1724.52.40.01 C35 1-16 1724.53.45.01 C51 24-34
1721.39.01.49 H50 24 1724.14.02.01 G50 4+5 1724.34.05.40 H30 21 1724.52.40.03 C35 1 1724.53.45.01 C56 24-34
1721.39.02.96 J78 5 1724.14.02.01 G72 7+8 1724.34.11.15 H20 2 1724.52.40.20 C35 2 1724.53.45.01 C61 24-34
1721.39.03.11 H55 2 1724.14.02.02 G50 4 1724.34.15.05 H30 4 1724.52.40.41 C35 3-18 1724.53.45.03 C51 24
1721.39.03.12 H55 3 1724.14.02.02 G72 7 1724.34.15.08 H30 5 1724.52.40.43 C35 17 1724.53.45.03 C56 24
1721.39.03.18 H55 16 1724.14.02.14 B75 6 1724.34.15.11 H30 7 1724.52.40.60 C35 18 1724.53.45.03 C61 24
1721.39.04.01 H65 1-4 1724.14.02.14 G10 2 1724.34.15.12 H30 8 1724.52.51.01 B30 20 1724.53.45.10 C51 25
1721.39.04.05 H65 4 1724.14.02.14 G30 4 1724.34.15.64 H30 9 1724.53.02.36 C50 14 1724.53.45.10 C56 25
1721.39.04.10 H65 7-10 1724.14.02.14 G32 4 1724.37.01.13 H50 3 1724.53.02.36 C55 14 1724.53.45.10 C61 25
1721.39.04.30 H65 8 1724.14.02.14 G50 2 1724.37.01.19 H50 9 1724.53.02.36 C60 14 1724.53.45.16 C51 26
1721.39.06.04 H61 41 1724.14.02.14 G70 2 1724.37.01.25 H50 11 1724.53.03.38 C40 1 1724.53.45.16 C56 26
1721.39.07.01 H51 30 1724.14.02.14 G72 3 1724.37.01.54 H50 23 1724.53.07.24 C51 42 1724.53.45.16 C61 26
1721.39.07.02 H51 31 1724.14.13.13 G60 9 1724.37.03.01 H55 1-15 1724.53.07.24 C56 42 1724.54.01.22 C45 8-10
1721.39.07.03 H51 32 1724.14.62.14 G10 13 1724.37.03.02 H55 1 1724.53.07.24 C61 42 1724.54.04.08 C45 12
1721.39.07.05 H51 33 1724.14.62.14 G70 10 1724.37.03.55 H55 18 1724.53.07.25 C51 42 1724.54.04.10 C45 13
1721.46.06.05 J10 10 1724.16.04.06 G70 18 1724.37.03.78 H55 27 1724.53.07.25 C56 42 1724.54.11.04 C10 14
1722.03.15.01 B11 1 1724.18.02.06 G40 5 1724.37.05.70 H61 40-44 1724.53.07.25 C61 42 1724.54.11.04 C10 21
1722.03.15.16 B11 5 1724.18.03.11 G10 18 1724.37.05.71 H61 40 1724.53.11.01 C50 15 1724.54.11.05 C10 17
1722.03.15.17 B11 1-4 1724.18.03.11 G50 12 1724.37.10.01 H61 56 1724.53.11.01 C55 15 1724.54.34.02 C45 12
1722.16.02.05 G60 10 1724.18.03.15 G70 13 1724.49.01.07 A40 5 1724.53.11.01 C60 15 1724.54.34.07 C45 13
1722.16.02.15 G40 4 1724.18.03.15 G72 10 1724.49.01.10 A40 8 1724.53.12.05 C50 17 1724.55.03.01 C65 2-10
1722.19.02.10 G60 4 1724.19.01.03 G60 1 1724.49.02.03 A40 16 1724.53.12.05 C55 17 1724.55.03.01 C70 2-10
1722.19.03.10 G60 6 1724.19.01.09 G60 2 1724.49.02.10 A40 20 1724.53.12.05 C60 17 1724.55.03.03 C65 2
1722.39.02.70 H55 22 1724.19.02.01 G60 7 1724.50.01.14 A45 16 1724.53.12.05 E10 2 1724.55.03.03 C70 2
1722.52.03.04 C20 22 1724.25.01.01 E10 1 1724.50.01.20 A45 17 1724.53.12.11 C50 20 1724.55.03.03 C70 15
L 13
1722.52.08.11 C30 3 1724.26.14.03 E35 1 1724.50.05.03 A45 1 1724.53.12.11 C55 20 1724.55.03.09 C65 3
1722.53.07.27 C51 43 1724.27.11.00 H11 18-24 1724.50.05.08 A45 2 1724.53.12.11 C60 20 1724.55.03.09 C70 3
1722.53.07.27 C56 43 1724.27.11.00 H16 22-28 1724.52.07.01 C27 1-11 1724.53.12.35 C50 16 1724.55.03.11 C65 4
1722.58.37.08 H10 13 1724.27.11.01 H11 18 1724.52.07.22 C27 4 1724.53.12.35 C55 16 1724.55.03.11 C70 4
TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR.
PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR.
04.09
PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO.
1724.55.12.37 H62 11 1724.56.47.09 J66 53 1726.37.21.96 H65 13 1729.51.20.70 K25 9 1729.55.26.01 C75 1
1724.55.21.03 C65 1 1724.56.47.09 J71 53 1726.37.25.17 H61 42* 1729.51.20.90 K25 4 1729.55.26.01 C80 1
1724.55.24.03 C65 1 1724.57.56.07 J30 12 1729.05.07.01 B20 21 1729.53.04.01 C51 38-40 1729.55.26.02 C80 2
1724.55.50.48 C80 23 1724.57.56.07 J35 16 1729.05.08.01 B20 20 1729.53.04.06 C51 38 1729.56.32.11 J40 24
1724.55.50.48 J81 43 1724.57.57.09 J35 22 1729.16.02.20 G10 7 1729.53.04.08 C51 39 1729.56.32.11 J50 24
1724.55.50.52 C75 6-9 1724.57.58.08 J35 29 1729.16.02.20 G70 7 1729.53.04.13 C51 40 1729.56.33.09 J40 27
1724.55.50.52 C80 14-17 1724.92.03.11 B70 2 1729.25.19.02 E10 10-12 1729.53.06.01 C55 1 1729.56.33.09 J50 27
1724.55.50.54 C75 6 1725.05.02.50 B20 2 1729.25.19.36 E10 10 1729.53.06.05 C55 2 1729.56.34.09 J40 28
1724.55.50.54 C80 14 1725.05.02.51 B20 3 1729.25.19.36 E10 20 1729.53.06.05 C60 2 1729.56.34.09 J50 28
1724.55.50.56 C75 7 1725.05.02.52 B20 2-4 1729.25.20.02 E10 20-22 1729.53.07.01 C56 38-40 1729.56.36.04 J40 29
1724.55.50.56 C80 15 1725.34.07.10 H10 12 1729.37.01.01 H50 1 1729.53.07.07 C56 38 1729.56.36.04 J50 29
1724.55.50.71 C75 17 1725.34.07.10 H15 16 1729.37.01.10 H50 2 1729.53.07.12 C56 39 1729.56.36.08 J40 31
WELGER RP 405 / RP 435
1724.55.50.71 C81 27 1725.34.07.10 H61 57 1729.37.03.08 H55 5 1729.53.07.12 C61 39 1729.56.36.21 J41 34
1724.56.02.16 J30 8 1725.37.09.03 E11 28 1729.37.03.80 H55 28 1729.53.07.20 C56 40 1729.56.36.21 J51 33
1724.56.02.16 J35 9 1725.37.09.03 G60 15 1729.37.05.12 H60 2 1729.53.07.20 C61 40 1729.56.36.36 J41 38
1724.56.03.14 J35 13 1725.37.09.26 H65 1 1729.37.05.22 H60 7 1729.53.13.01 C55 1 1729.56.36.46 J41 39
1724.56.04.14 J35 14 1726.05.02.01 B20 1 1729.37.05.51 H60 20 1729.53.14.01 C56 38-41 1729.56.36.55 J41 40
1724.56.06.06 J30 12 1726.05.04.09 B20 16 1729.37.05.58 H60 21 1729.53.14.07 C56 38 1729.56.37.04 J41 41
1724.56.06.06 J35 16 1726.05.04.10 B20 17 1729.37.05.68 H61 37 1729.55.05.02 C70 14-16 1729.56.37.04 J51 37
1724.56.06.12 J30 15 1726.10.21.10 G20 9 1729.37.05.82 H60 15 1729.55.05.03 C70 14 1729.56.37.08 J41 42
1724.56.06.12 J35 20 1726.10.21.10 G25 18 1729.37.05.88 H60 10 1729.55.05.10 C65 16-19 1729.56.37.08 J51 38
1724.56.07.06 J35 22 1726.10.21.11 G20 10 1729.37.05.97 H60 16 1729.55.05.10 C70 19-22 1729.56.37.20 J41 44
1724.56.07.13 J35 27 1726.10.21.11 G25 17 1729.37.06.16 H61 50 1729.55.05.12 C65 16 1729.56.50.22 J40 16
1724.56.08.06 J35 29 1726.14.03.05 G34 5 1729.37.08.02 H70 1 1729.55.05.12 C70 19 1729.56.50.22 J45 16
1724.56.08.13 J36 31 1726.34.01.45 H20 6+7 1729.37.08.14 H70 5 1729.55.05.20 C65 19 1729.56.50.22 J50 16
1724.56.17.07 J30 18 1726.34.01.47 H20 7 1729.37.08.36 H70 11 1729.55.05.20 C70 22 1729.56.50.22 J55 16
1724.56.17.07 J31 23 1726.34.02.01 H25 1-5 1729.37.08.49 H70 16 1729.55.06.05 C65 20 1729.56.50.36 J40 21
1724.56.17.07 J36 45 1726.34.02.02 H25 1 1729.37.08.49 J81 49 1729.55.06.05 C70 26 1729.56.50.36 J45 21
1724.56.17.07 J41 48 1726.34.02.27 H25 7-9 1729.37.08.55 H70 3 1729.55.13.03 C70 1 1729.56.50.36 J50 21
1724.56.17.07 J46 53 1726.34.02.40 H25 13-15 1729.37.08.64 H70 7 1729.55.17.03 C70 1 1729.56.50.36 J55 21
1724.56.17.07 J51 42 1726.34.03.01 H25 23-26 1729.37.08.64 J81 47 1729.55.17.43 C65 13 1729.56.53.02 J40 22
1724.56.17.07 J56 49 1726.34.03.02 H25 23 1729.37.10.03 H61 59 1729.55.17.43 C70 11 1729.56.53.02 J45 22
1724.56.17.07 J61 52 1726.34.03.10 H26 27 1729.37.12.10 H51 36 1729.55.18.01 C80 1 1729.56.53.02 J50 22
1724.56.17.07 J66 52 1726.34.06.01 H26 30-33 1729.50.05.05 A45 4 1729.55.18.02 C80 2 1729.56.53.02 J55 22
1724.56.17.07 J71 52 1726.34.06.02 H26 30 1729.51.20.01 K25 1 1729.55.18.05 C75 2 1729.56.54.09 J45 27
1724.56.47.09 J30 26 1726.34.06.10 H26 37 1729.51.20.05 K25 2 1729.55.18.05 C80 3 1729.56.54.09 J55 27
1724.56.47.09 J31 24 1726.34.06.15 H20 25+26 1729.51.20.12 K25 4-5 1729.55.18.14 C80 5 1729.56.55.09 J45 28
1724.56.47.09 J36 46 1726.34.06.17 H20 26 1729.51.20.18 K25 15 1729.55.18.31 C75 4 1729.56.55.09 J55 28
1724.56.47.09 J41 49 1726.34.06.25 H26 38 1729.51.20.22 K25 16 1729.55.18.31 C80 9 1729.56.57.04 J45 29
L 14
1724.56.47.09 J46 54 1726.34.07.46 H10 11 1729.51.20.35 K25 19 1729.55.18.42 C81 36 1729.56.57.04 J55 29
1724.56.47.09 J51 43 1726.34.07.46 H15 15 1729.51.20.41 K25 20 1729.55.18.46. C80 11 1729.56.57.08 J45 31
1724.56.47.09 J56 50 1726.34.09.12 H30 1 1729.51.20.52 K25 7 1729.55.18.93 C81 30 1729.56.57.21 J46 34
1724.56.47.09 J61 53 1726.37.21.95 H65 13-15 1729.51.20.57 K25 7 1729.55.25.03 C70 1 1729.56.57.21 J56 33
TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR.
PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR.
04.09
PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO.
1729.56.57.36 J46 38 1740.61.55.35 J77 1 1752.15.11.17 G25 9 1752.51.04.43 K15 12 1753.18.01.03 G50 1
1729.56.57.46 J46 39 1740.61.55.35 J83 1 1752.15.11.37 G25 12 1752.51.04.44 K15 13 1753.18.04.01 G50 8
1729.56.57.55 J46 40 1740.63.15.01 K30 14 1752.15.11.40 G25 12a 1752.51.04.50 K15 1 1753.18.05.05 G10 17
1729.56.58.04 J46 41 1740.83.01.39 F21 34* 1752.15.12.01 G25 14-18 1752.51.04.50 K16 1 1753.18.05.05 G50 6
1729.56.58.04 J56 37 1741.27.06.12 H10 11-16 1752.15.12.02 G25 14 1752.51.04.50 K17 1 1753.20.04.05 G70 1
1729.56.58.08 J46 42 1741.27.06.12 H15 15-20 1752.16.05.05 G34 1 1752.61.11.04 J78 2 1753.20.04.08 G72 1
1729.56.58.08 J56 38 1741.52.01.05 C15 1 1752.16.05.14 G34 2 1752.61.11.04 J85 1 1753.20.05.03 G70 5
1729.56.58.24 J46 44 1741.52.02.01 C20 1 1752.16.06.05 G34 4 1752.61.11.30 J78 16-18 1753.20.05.03 G72 5
1729.56.58.24 J56 40 1741.52.02.36 C20 11 1752.19.04.01 E10 26 1752.61.11.30 J85 16-18 1753.20.07.03 G70 19
1729.56.59.04 J46 46 1741.61.45.43 J80 14 1752.19.07.01 E11 30 1752.61.11.42 J75 25 1753.20.12.05 G72 6
1729.56.59.04 J56 42 1742.27.10.03 H10 1 1752.19.07.01 G60 13 1752.61.11.42 J81 36 1753.25.01.01 E10 1
1729.56.59.19 J46 47 1742.27.10.12 H10 2 1752.19.07.06 E11 31 1752.61.11.54 J76 27 1753.25.07.09 E11 36-39
WELGER RP 405 / RP 435
1729.56.59.19 J56 43 1751.51.09.04 K20 11 1752.19.07.06 G60 16 1752.61.11.54 J81 52 1753.25.14.15 G72 15
1729.56.76.08 J50 31 1751.51.09.06 K20 13 1752.26.03.24 E20 12 1752.61.11.55 J76 29 1753.26.01.08 E30 2
1729.56.93.08 J55 31 1752.02.03.05 A20 13 1752.27.01.01 H62 1 1752.61.11.55 J81 54 1753.26.01.09 E30 3
1729.57.27.14 J60 29 1752.02.03.05 A20 16 1752.27.03.01 H62 5 1752.61.14.20 J75 24 1753.26.01.12 E30 11
1729.57.28.10 J61 34 1752.02.03.05 A21 18 1752.27.03.07 H62 6 1752.61.14.20 J80 29 1753.26.03.09 E20 14
1729.57.28.10 J66 34 1752.03.05.22 B10 12 1752.27.07.02 H11 25 1752.61.14.22 J75 23 1753.26.03.37 E20 7
1729.61.09.10 J81 39 1752.04.07.01 B10 5 1752.27.07.06 H11 26 1752.61.14.22 J80 28 1753.37.04.06 H65 5
1729.61.09.11 J81 41 1752.04.07.02 B10 6 1752.27.07.20 H10 7 1752.61.25.43 J81 57 1753.46.05.22 J20 14
1729.61.12.01 J75 10-12 1752.08.01.27 B40 5 1752.34.13.01 H22 1 1752.61.25.46 J81 37 1753.46.06.18 J10 11
1729.61.12.01 J80 18-20 1752.08.04.01 B40 12 1752.34.13.08 H22 2 1752.61.25.50 J81 56 1753.46.06.24 J10 13
1729.61.12.10 J75 10 1752.08.04.05 B40 13 1752.46.05.08 J10 18 1752.92.06.01 B75 1-15 1753.46.09.22 J25 14
1729.61.12.10 J80 18 1752.09.01.13 B50 8 1752.46.05.15 J10 17 1752.92.06.03 B75 1 1753.50.06.41 A45 13
1740.02.03.03 A20 12 1752.10.01.01 B60 1 1752.46.16.22 J20 10 1752.92.06.11 B75 2 1753.50.06.46 A45 14
1740.02.03.03 A20 15 1752.10.02.01 B60 4 1752.46.16.22 J25 10 1752.92.06.17 B75 3 1753.51.02.35 K11 28
1740.26.04.22 E20 10 1752.10.03.01 B60 6 1752.51.01.03 K10 3 1753..25.07.02 E11 41 1753.51.02.75 K10 13
1740.26.15.03 E35 1 1752.14.02.03 G10 1 1752.51.02.01 K10 6 1753.09.01.14 B50 5 1753.51.03.04 C10 26
1740.61.35.09 J77 8* 1752.14.03.03 G10 5 1752.51.02.08 K10 7 1753.09.01.15 B50 6 1753.51.03.04 K20 9
1740.61.35.09 J83 8* 1752.14.04.31 G10 11 1752.51.02.14 K10 8 1753.10.03.08 B60 8 1753.51.20.75 K25 11
1740.61.35.61 J77 2 1752.15.01.01 G20 1-5 1752.51.02.23 K10 11 1753.10.03.12 B60 10 1753.51.20.84 K25 13
1740.61.35.61 J83 2 1752.15.01.02 G20 1 1752.51.02.41 K10 17 1753.15.01.10 G20 4 1753.55.06.06 C65 14
1740.61.35.62 J77 3 1752.15.01.07 G20 2 1752.51.02.45 K10 18 1753.15.01.11 G20 5 1753.55.06.06 C70 12
1740.61.35.63 J77 4 1752.15.01.07 G20 7 1752.51.02.61 K10 23 1753.16.01.11 G30 1 1753.61.07.02 J75 16
1740.61.35.63 J83 3 1752.15.01.07 G25 15 1752.51.02.65 K10 24 1753.16.01.11 G32 1 1753.61.07.02 J80 8
1740.61.35.64 J77 5 1752.15.02.01 G20 6-10 1752.51.03.01 K20 1 1753.16.02.01 G30 2 1753.61.07.03 J75 16
1740.61.35.64 J83 4 1752.15.02.02 G20 6 1752.51.03.10 K20 4 1753.16.02.01 G32 2 1753.61.07.03 J80 9
1740.61.35.65 J77 6 1752.15.03.05 G20 11 1752.51.03.11 K20 5 1753.16.02.08 B75 5 1753.61.11.01 J78 1
1740.61.35.65 J83 5 1752.15.03.05 G25 11 1752.51.03.12 K20 6 1753.16.02.08 G30 5 1753.61.11.18 J78 9
L 15
1740.61.35.66 J77 7 1752.15.11.01 G25 1-10 1752.51.04.05 K15 9 1753.16.02.08 G32 5 1753.61.11.18 J85 9
1740.61.35.66 J83 6 1752.15.11.02 G25 1 1752.51.04.30 K15 15 1753.17.01.01 G40 1 1753.61.11.25 J78 14
1740.61.35.66 J83 7 1752.15.11.06 G25 2 1752.51.04.40 K15 11-14 1753.17.02.01 G40 2 1753.61.11.25 J85 14
1740.61.40.01 J81 45 1752.15.11.16 G25 10 1752.51.04.42 K15 11 1753.17.03.01 G40 8 1753.61.26.07 J85 4
TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR. TEILE NR. SEITE NR.
PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR. PART.NR. PAGE NR.
04.09
PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO. PIECE NO. PAGE NO.