Académique Documents
Professionnel Documents
Culture Documents
Important Precautions
- i
GE PROPRIETARY TO GE VOLUSON S6/S8
DIRECTION 5723472, REVISION 4 MECHANICAL OPTION INSTALLATION INSTRUCTION
ii -
GE PROPRIETARY TO GE VOLUSON S6/S8
DIRECTION 5723472, REVISION 4 MECHANICAL OPTION INSTALLATION INSTRUCTION
- iii
GE PROPRIETARY TO GE VOLUSON S6/S8
DIRECTION 5723472, REVISION 4 MECHANICAL OPTION INSTALLATION INSTRUCTION
iv -
GE PROPRIETARY TO GE VOLUSON S6/S8
DIRECTION 5723472, REVISION 4 MECHANICAL OPTION INSTALLATION INSTRUCTION
- v
GE PROPRIETARY TO GE VOLUSON S6/S8
DIRECTION 5723472, REVISION 4 MECHANICAL OPTION INSTALLATION INSTRUCTION
vi -
GE PROPRIETARY TO GE VOLUSON S6/S8
DIRECTION 5723472, REVISION 4 MECHANICAL OPTION INSTALLATION INSTRUCTION
- vii
GE PROPRIETARY TO GE VOLUSON S6/S8
DIRECTION 5723472, REVISION 4 MECHANICAL OPTION INSTALLATION INSTRUCTION
(JA)
Traditional
Chinese
viii -
GE PROPRIETARY TO GE VOLUSON S6/S8
DIRECTION 5723472, REVISION 4 MECHANICAL OPTION INSTALLATION INSTRUCTION
(ZH-CN)
(KO)
- ix
GE PROPRIETARY TO GE VOLUSON S6/S8
DIRECTION 5723472, REVISION 4 MECHANICAL OPTION INSTALLATION INSTRUCTION
DAMAGE IN TRANSPORTATION
All packages should be closely examined at time of delivery. If damage is apparent write “Damage In
Shipment” on ALL copies of the freight or express bill BEFORE delivery is accepted or “signed for” by
a GE representative or hospital receiving agent. Whether noted or concealed, damage MUST be
reported to the carrier immediately upon discovery, or in any event, within 14 days after receipt, and the
contents and containers held for inspection by the carrier. A transportation company will not pay a claim
for damage if an inspection is not requested within this 14 day period.
The purchaser of GE equipment shall only utilize qualified personnel (i.e., GE’s field engineers,
personnel of third-party service companies with equivalent training, or licensed electricians) to perform
electrical servicing on the equipment.
GE Ultrasound Korea,Ltd
9, Sunhwan-ro 214beon-gil,
Jungwon-gu, Seongnam-si
Gyeonggi-do,
Korea
GE Healthcare employees should contact the product's Lead Service Integrator (LSI) to report service
documentation issues. DO NOT use TrackWise for this purpose. The LSI will then use the internal
problem reporting tool to communicate these issues to the writer.
NOTICE For a complete review of all safety requirements, see the Chapter 1, Safety Considerations section of
the latest version of Voluson S6/S8 Proprietary Service Manual (GPN:5721281).
x -
GE PROPRIETARY TO GE VOLUSON S6/S8
DIRECTION 5723472, REVISION 4 MECHANICAL OPTION INSTALLATION INSTRUCTION
LEGAL NOTES
The contents of this publication may not be copied or duplicated in any form, in whole or in part, without
prior written permission of GE .
GE may revise this publication from time to time without written notice.
PROPRIETARY TO GE
Permission to use this Advanced Service Software and related documentation (herein called the
material) by persons other than GE employees is provided only under an Advanced Service Package
License relating specifically to this Proprietary Material. This is a different agreement from the one under
which operating and basic service software is licensed. A license to use operating or basic service
software does not extend to or cover this software or related documentation.
If you are a GE employee or a customer who has entered into such a license agreement with GE to
use this proprietary software, you are authorized to use this Material according to the conditions stated
in your license agreement.
However, you do not have the permission of GE to alter, decompose or reverse-assemble the software,
and unless you are a GE employee, you MAY NOT COPY the Material. The Material is protected by
Copyright and Trade Secret laws; the violation of which can result in civil damages and criminal
prosecution.
If you are not party to such a license agreement or a GE Employee, you must exit this Material now.
TRADEMARKS
All products and their name brands are trademarks of their respective holders.
COPYRIGHTS
All Material Copyright© 2015-17 by General Electric Company Inc. All Rights Reserved.
- xi
GE PROPRIETARY TO GE VOLUSON S6/S8
DIRECTION 5723472, REVISION 4 MECHANICAL OPTION INSTALLATION INSTRUCTION
Revision History
4 May 2017 Update Low Cost Frame parts in section 2-1 High-Cabinet Installation
Warnings i to -xii 4
1-1 to 1-16 4
2-1 to 2-46 4
xii -
GE PROPRIETARY TO GE VOLUSON S6/S8
DIRECTION 5723472, REVISION 4 MECHANICAL OPTION INSTALLATION INSTRUCTION
CHAPTER 1
Peripheral Installation for Standard Configuration (Mid-Cabi-
net)
BW Printer Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Parts Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Installation procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Printer Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
Table of Contents i
GE PROPRIETARY TO GE VOLUSON S6/S8
DIRECTION 5723472, REVISION 4 MECHANICAL OPTION INSTALLATION INSTRUCTION
CHAPTER 2
Peripheral Installation for High-Cabinet Configuration
High-Cabinet Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
Parts Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
Installation procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2
BW PRINTER Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 22
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 22
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 22
Parts Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 22
Installation procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 22
Printer Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 29
DRAWER Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 36
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 36
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 36
Parts Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 36
Installation procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 36
ii Table of Contents
GE PROPRIETARY TO GE VOLUSON S6/S8
DIRECTION 5723472, REVISION 4 MECHANICAL OPTION INSTALLATION INSTRUCTION
Chapter 1
Peripheral Installation for Standard
Configuration (Mid-Cabinet)
Table 1-1
NOTE: Read and Understand these Instruction completely before proceeding with the installation.
Perform each stem in sequence and check when completed. if a problem occurs after
completion. go back to the procedure and check for implementation errors before contacting
your ultrasound region. Keep Instructions for future referece.
Please be aware that the colors and shapes of the parts’ pictures that are contained in this document
can be different from the real parts. Since this document focuses mainly on the assembly procedure,
the difference between the pictures and the real parts will not have any impact. To check the part color
and the real shape, please refer to each part drawing.
3.) Fix BW PRINTER to COLOR PRINTER BRKT POLARIS with 4 screws (2306562, FH M3XX6)
Figure 1-2 Fix BW PRINTER to COLOR PRINTER BRKT POLARIS with 4 screws
Figure 1-4 Assemble BW PRINTER ASSY to MID FRAME ASSY with 4 screws
USB CABLE
POWER CABLE
Figure 1-10 Set the USB and POWER CABLE with left CABLE CLAMP
9.) Assemble PRINTER CABLE SUPPORT BRKT POLARIS with 2 screws (5178673, SCREW FH
M4X6)
Unhook 2 points
MID CABINET ASSY
Figure 1-13 Assemble DUMMY CASE MID BW with MID CABINET ASSY
Table 1-2
NOTE: Read and Understand these Instruction completely before proceeding with the installation.
Perform each stem in sequence and check when completed. if a problem occurs after
completion. go back to the procedure and check for implementation errors before contacting
your ultrasound region. Keep Instructions for future referece.
Please be aware that colors of parts in the pictures contained in this document can be different from the
real colors of the parts, since this document focuses mainly on the assembly procedure of parts. For
each part color check, please refer to the each part drawing.
3.) Fix COLOR PRINTER to COLOR PRINTER BRKT POLARIS with 6 screws (2306562, FH M3X6)
USB CABLE
POWER CABLE
c.) Set the USB CABLE and POWER CABLE with left CABLE CLAMP.
Figure 1-25 Set the USB and POWER CABLE with left CABLE CLAMP
9.) Remove DUMMY COVER COLOR PRINTER from MID CABINET ASSY.
Unhook 2 points
MID CABINET ASSY
Figure 1-26 Remove DUMMY COLOR PRINTER From MID CABINET ASSY
Chapter 2
Peripheral Installation for High-Cabinet
Configuration
Table 2-1
NOTE: Read and Understand these Instruction completely before proceeding with the installation.
Perform each stem in sequence and check when completed. if a problem occurs after
completion. go back to the procedure and check for implementation errors before contacting
your ultrasound region. Keep Instructions for future referece.
Please be aware that the colors and shapes of the parts’ pictures that are contained in this document
can be different from the real parts. Since this document focuses mainly on the assembly procedure,
the difference between the pictures and the real parts will not have any impact. To check the part color
and the real shape, please refer to each part drawing.
Figure 2-1 Unscrewing 5 screws and removing the REAR COVER ASSY
3.) Unscrew 4 screws and remove SPEAKER DUMMY BACK COVER BRKT.
Figure 2-2 Unscrewing 4 screws and removing the SPEAKER DUMMY BACK COVER BRKT
4.) Unscrew 5 screws and remove the SPEAKER DUMMY BACK BRKT.
Figure 2-3 Unscrewing 5 screws and removing the SPEAKER DUMMY BACK BRKT
Figure 2-4 Unscrewing and disconnecting the LOWER GROUND CABLE POLARIS
Figure 2-5 Unscrewing and Removing the ELEVATION ARM DOWN STOPPER MID MIZAR
c.) Change the ELEVATION ARM DOWN STOPPER as High from Mid.
Figure 2-6 Shape of the ELEVATION ARM DOWN STOPPER High and Mid
Figure 2-7 Direction of the ELEVATION ARM DOWN STOPPER High and Mid
Figure 2-8 Assembling the ELEVATION ARM DOWN STOPPER HIGH POLARIS
e.) Fix the LOWER GROUND CABLE POLARIS with screw (2159625 SCREW PH W/SP M4X8)
Figure 2-9 Fixing the LOWER GROUND CABLE POLARIS with 1 screw
6.) Remove the MID CABINET ASSY from the MID FRAME ASSY.
Figure 2-10 Moving forward the MID CABINET ASSY following slide rail
12.)Unscrew 4 screws to remove the DVD from the MID FRAME ASSY.
13.)Remove the MID FRAME ASSY from the MAIN FRAME ASSY.
Figure 2-20 Unscrewing 4 screws and removing the MID FRAME ASSY
Figure 2-21 Unscrewing 4 screws and removing the SPEAKER DUMMY BRKT
Figure 2-22 Placing the HIGH FRAME GROUND BRKT on the BACKBONE
16.)Place the SPEAKER DUMMY BRKT over the HIGH FRAME GROUND BRKT on the BACKBONE
Figure 2-23 Placing the SPEAKER DUMMY BRKT on the HIGH FRAME GROUND BRKT
17.)Assemble the SPEAKER DUMMY BRKT with 5 screws (2159625 W/SP PH M4X8)
Figure 2-24 Assembling the HIGH FRAME GROUND BRKT with 5 screws
No GEPN Name W T L
1 60
3 60
Figure 2-34 Screwing 5 screws to fix the SPEAKER DUMMY BACK BRKT
Figure 2-35 Screwing 4 screws to fix the SPEAKER DUMMY BACK COVER BRKT
Put in the HIGH CABINET ASSY for using slide rail and then it is assembled with latch
Unhook 2 points
DUMMY BW COVER
Figure 2-39 Assembling the DUMMY COVER COLOR PRINTER and the DUMMY BW COVER
Figure 2-40 Lifting the ELEVATION ARM ASSY to the highest position
Figure 2-41 Unscrewing 4 screws to disassemble the ELEVATION LOWER COVER LCF
ELEVATION ARM STOPPER 12 DEG LCF ELEVATION ARM STOPPER 12 DEG LCF
Figure 2-42 Unscrewing 2 screws to remove the ELEVATION ARM STOPPER 12 DEG LCF
ELEVATION ARM STOPPER 0 DEG LCF ELEVATION ARM STOPPER 0 DEG LCF
Figure 2-43 Assembling the ELEVATION ARM STOPPER 0 DEG LCF using screws
(2160212, SCREW FLAT HEAD M4X8)
7.) Assemble the ELEVATION ARM LOWER COVER LCF using 4 screws (Refer to Step 2.)~3)) .
8.) Refer to Step 6.) ~ Step 28.) of the System without LCF (section 2-1-4-1 on page 2) .
NOTE: Read and Understand these Instruction completely before proceeding with the installation.
Perform each stem in sequence and check when completed. if a problem occurs after
completion. go back to the procedure and check for implementation errors before contacting
your ultrasound region. Keep Instructions for future referece.
Please be aware that the colors and shapes of the parts’ pictures that are contained in this document
can be different from the real parts. Since this document focuses mainly on the assembly procedure,
the difference between the pictures and the real parts will not have any impact. To check the part color
and the real shape, please refer to each part drawing.
Figure 2-44 Moving forward HIGH Cabinet Assy following Slide Rail
6.) Assemble BW PRINTER ASSY to HIGH FRAME ASSY with 4 screws (2159625, W/SP M4X8)
Figure 2-47 Assemble BW PRINTER ASSY to HIGH FRAME ASSY with 4 screws
USB CABLE
POWER CABLE
11.)Set the USB CABLE and POWER CABLE with left CABLE CLAMP.
Figure 2-54 Set the USB and POWER CABLE with left CABLE CLAMP
DUMMY BW COVER
Unhook 2 points
Figure 2-55 Remove DUMMY BW COVER FROM HIGH CABINET ASSY
And this section contain BM PRINTER figure to explain both installation condition.
Table 2-1
NOTE: Read and Understand these Instruction completely before proceeding with the installation.
Perform each stem in sequence and check when completed. if a problem occurs after
completion. go back to the procedure and check for implementation errors before contacting
your ultrasound region. Keep Instructions for future referece.
Please be aware that colors of parts in the pictures contained in this document can be different from the
real colors of the parts, since this document focuses mainly on the assembly procedure of parts. For
each part color check, please refer to the each part drawing.
Figure 2-59 Move forward HIGH Cabinet Assy following Slide Rail
4.) Fix COLOR PRINTER to COLOR PRINTER BRKT POLARIS with 6 screws (2306562, FH M3X6)
6.) Assemble COLOR PRINTER ASSY with 4 screws (5178673, SCREW FH M4X6)
Figure 2-62 Assemble COLOR PRINTER ASSY to HIGH FRAME ASSY with 4 screws
c.) Set the USB CABLE and POWER CABLE with left CABLE CLAMP.
Figure 2-67 Set the USB and POWER CABLE with left CABLE CLAMP
DUMMY BW COVER
Unhook 2 Points
Figure 2-68
Figure 2-69 Remove DUMMY COVER COLOR PRINTER from HIGH CABINET ASSY
Table 2-4
NOTE: Read and Understand these Instruction completely before proceeding with the installation.
Perform each stem in sequence and check when completed. if a problem occurs after
completion. go back to the procedure and check for implementation errors before contacting
your ultrasound region. Keep Instructions for future referece.
Please be aware that colors of parts in the pictures contained in this document can be different from the
real colors of the parts, since this document focuses mainly on the assembly procedure of parts. For
each part color check, please refer to the each part drawing.
Figure 2-73 Move forward HIGH Cabinet Assy following Slide Rail
www.gehealthcare.com