Académique Documents
Professionnel Documents
Culture Documents
Important Precautions
- i
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
ii -
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
- iii
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
iv -
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
- v
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
vi -
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
- vii
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
(JA)
Traditional
Chinese
viii -
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
(ZH-CN)
(KO)
- ix
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
DAMAGE IN TRANSPORTATION
All packages should be closely examined at time of delivery. If damage is apparent write “Damage In
Shipment” on ALL copies of the freight or express bill BEFORE delivery is accepted or “signed for” by
a GE representative or hospital receiving agent. Whether noted or concealed, damage MUST be
reported to the carrier immediately upon discovery, or in any event, within 14 days after receipt, and the
contents and containers held for inspection by the carrier. A transportation company will not pay a claim
for damage if an inspection is not requested within this 14 day period.
The purchaser of GE equipment shall only utilize qualified personnel (i.e., GE’s field engineers,
personnel of third-party service companies with equivalent training, or licensed electricians) to perform
electrical servicing on the equipment.
GE Healthcare employees should contact the product's Lead Service Integrator (LSI) to report service
documentation issues. DO NOT use TrackWise for this purpose. The LSI will then use the internal
problem reporting tool to communicate these issues to the writer.
WARNING Use
WARNING all Personal Protection Equipment (PPE) such as gloves, safety shoes, safety
glasses, and kneeling pad, to reduce the risk of injury.
NOTICE For a complete review of all safety requirements, see the Chapter 1, Safety Considerations
section of the lastest version of VOLUSON S6/S8 Proprietary Service Manual(GPN:5589165).
x -
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
LEGAL NOTES
The contents of this publication may not be copied or duplicated in any form, in whole or in part, without
prior written permission of GE .
GE may revise this publication from time to time without written notice.
PROPRIETARY TO GE
Permission to use this Advanced Service Software and related documentation (herein called the
material) by persons other than GE employees is provided only under an Advanced Service Package
License relating specifically to this Proprietary Material. This is a different agreement from the one under
which operating and basic service software is licensed. A license to use operating or basic service
software does not extend to or cover this software or related documentation.
If you are a GE employee or a customer who has entered into such a license agreement with GE to
use this proprietary software, you are authorized to use this Material according to the conditions stated
in your license agreement.
However, you do not have the permission of GE to alter, decompose or reverse-assemble the software,
and unless you are a GE employee, you MAY NOT COPY the Material. The Material is protected by
Copyright and Trade Secret laws; the violation of which can result in civil damages and criminal
prosecution.
If you are not party to such a license agreement or a GE Employee, you must exit this Material now.
TRADEMARKS
All products and their name brands are trademarks of their respective holders.
COPYRIGHTS
All Material Copyright© 2015-2017 by General Electric Company Inc. All Rights Reserved.
- xi
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
Revision History
Warnings i to -xii 6
1-1 to 1-6 6
2-1 to 2-4 6
3-1 to 3-6 6
xii -
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
CHAPTER 1
Voluson BT14 to BT15 Upgrade kit Instruction
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Precondition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Purpose of the BT12 to BT14 Upgrade Manual . . . . . . . . . . . . . . . . . . . . . 1-1
Average Installation Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Special Tools and Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Contents of the Upgrade Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Table of Contents i
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
CHAPTER 2
Voluson BT14 to BT15 Upgrade kit Software Upgrade Proce-
dure
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
Change BIOS Boot Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
System Software - Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2
Re-adjust BIOS Boot Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3
Activating System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4
ii Table of Contents
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
CHAPTER 3
Voluson BT14 to BT15 Upgrade kit Setup and Checkout
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Reload Archive Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Verify System Setup pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Printer Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Remote Control Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Check System Info page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Functional Checks after Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Complete the Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
CHAPTER 4
Voluson BT14 to BT15 Upgrade kit UDI Label Attachment Pro-
cedure
Parts Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1
Installation procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1
iv Table of Contents
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
Chapter 1
Voluson BT14 to BT15 Upgrade kit Instruction
NOTICE If unfamiliar with the system on site, please use the system’s manuals for reference, since not every
detail can be covered here.
• All software options already purchased are transferred to without additional costs.
• Image and patient data remain untouched and can be reused with the new software.
• Images and patient data are still available after the upgrade
NOTE: Additional items like, probes, peripherals as well as hard- and software options need to be
ordered separately according to the current price list of VolusonTM S-Series (BT14).
NOTE: This action will delete all user settings and system settings. so please make sure that all
necessary information are written down.
Technical Support
Start the Volume acquisition using a Real Time 4D continuous Volume Acquisition (without any "jumps")
Volume Mode
probe. and smooth echo shape with clear defined image edge
Figure 1-1 Version check (System Setup - Administration - SYSTEM INFO page) - (sample)
4.) Select the OPTIONS tab to see which options are currently installed in the system.
I = Inactive
(Option is not activated)
P = Permanent
(Option is permanently activated
[purchased])
Figure 1-2 System Setup - Administration - OPTIONS page (e.g., VS8) - (sample)
5.) Please print out this page or write down the state of the option (P = permanent, I = inactive).
NOTICE Even if they are restored after upgrade procedure, it is strongly recommend to record settings of all
other System setup pages; see: step 6.) to step 7.).
CAUTION It is essential for a successful upgrade procedure that external USB devices get powered off and
disconnected before proceeding with the upgrade.
Re-installation of any previously attached printer has to be done after the upgrade procedure.
Chapter 2
Voluson BT14 to BT15 Upgrade kit Software
Upgrade Procedure
1.) Using the "Arrow" keys [←left] or [→right] on the alphanumeric keyboard select the [Boot] tab.
2.) Using the keys PG UP [↑ up] and PG DN [↓ down] on the alphanumeric keyboard select Boot
Priority Selection and then press ENTER.
Chapter 2 - Voluson BT14 to BT15 Upgrade kit Software Upgrade Procedure 1-1
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
3.) Change Device Boot priority from Type Based to Device Based.
Select
[Media]
1-2 Chapter 2 - Voluson BT14 to BT15 Upgrade kit Software Upgrade Procedure
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
NOTE: If the message: "Recovery system (Linux) needs to be updated ..." appears, confirm with YES.
Select
[NewDisk]
4.) Remove the System DVD from the DVD/CD+(R)W Drive drive.
Chapter 2 - Voluson BT14 to BT15 Upgrade kit Software Upgrade Procedure 1-3
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
1.) During startup, press the DEL key immediately, to enter BIOS again.
2.) Using the "Arrow" keys [←left] or [→right] on the alphanumeric keyboard select the [Boot] tab.
3.) Using the keys PG UP [↑ up] and PG DN [↓ down] on the alphanumeric keyboard select Boot
Priority Selection and then press ENTER.
4.) Change Device Boot priority from Device Based to Type Based.
5.) Press the F10 key to Save and Exit.
6.) Confirm the "Save configuration changes and exit now?" message with YES and ENTER.
The system reboots automatically.
NOTICE An automated process was developed to install the required software parts, perform check disk, remap
drive letters and match settings. During this process the system will reboot several times!
1.) Please wait until all processes are finished and the final "DOS" window appear.
2.) Press the A key to activate the Ultrasound Application Software [UIS].
The Ultrasound Application continues to start. Finally the 2D screen is displayed on the monitor.
1-4 Chapter 2 - Voluson BT14 to BT15 Upgrade kit Software Upgrade Procedure
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
Chapter 3
Voluson BT14 to BT15 Upgrade kit Setup and
Checkout
Choose destination
Select Backup
Click [Next]
Chapter 3 - Voluson BT14 to BT15 Upgrade kit Setup and Checkout 1-1
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
Click [Yes]
1-2 Chapter 3 - Voluson BT14 to BT15 Upgrade kit Setup and Checkout
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
Click [Ok]
5.) Click the SAVE&EXIT button to store settings and exit the System Setup desktop screen.
Chapter 3 - Voluson BT14 to BT15 Upgrade kit Setup and Checkout 1-3
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
Software "Major" #
Software "Level"#
Tune version
of Application presets
4.) Check that Software "Major" version number is 14.0.0 and "Level"# is WESO and higher.
5.) Check that Tune-version of the Application presets match the System Software version.
6.) Disconnect all probes and then click the button at the bottom of the SYSTEM INFO page to start
Hardware configuration detection. (see: Figure 3-5, above)
1-4 Chapter 3 - Voluson BT14 to BT15 Upgrade kit Setup and Checkout
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
1.) Leave the Service Manual and System DVD of this Upgrade kit with the customer. Store the
System DVD under the systems back top cover.
2.) Return the system to the customer and ensure acceptance.
NOTICE Before leaving the customer site have the staff operate the system. Ensure that:
• all settings are customized.
• all peripherals are functioning.
• all communications are working properly (e.g. DICOM and external reporting; if
applicable)
3.) Properly dispose of excess material. Never leave old software and documents at the customer site.
Chapter 3 - Voluson BT14 to BT15 Upgrade kit Setup and Checkout 1-5
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
1-6 Chapter 3 - Voluson BT14 to BT15 Upgrade kit Setup and Checkout
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
Chapter 4
Voluson BT14 to BT15 Upgrade kit UDI Label
Attachment Procedure
Figure 4-1 Affix the UDI Label for BT14 to 15 SW UPKIT_VS6/S8 on the left rear side of the system
Chapter 4 - Voluson BT14 to BT15 Upgrade kit UDI Label Attachment Procedure 1-1
GE PROPRIETARY TO GE VOLUSON™S6/S8
DIRECTION 5620341, REVISION 6 BT14 TO BT15 UPGRADE MANUAL
1-2 Chapter 4 - Voluson BT14 to BT15 Upgrade kit UDI Label Attachment Procedure
© 2015-2017 General Electric Company.
GE
9, Sunhwan-ro 214beon-gil, Jungwon-gu, Seongnam-si,
Gyeonggi-do
Korea
www.gehealthcare.com