Académique Documents
Professionnel Documents
Culture Documents
Dveloppement Durable.
Poutres et Poutrelles intgres
Portiques
Poteaux
Assemblages
Poutres
Poteaux
Assemblages
ACB+ v3.02
ANGELINA v3.00
S'inscrire
AMECO v2.02
Poteaux
OZone v 2.2.6
Temprature des gaz en cas d'incendie selon EN 1991-1-2 et temprature
correspondante de lacier selon EN 1993-1-2.
Btiments Industriels
LUCA v 1.2
LUCA est un programme en relation avec un guide de dimensionnement pour les
halls industriels en situation dincendie. Cet outil permet de calculer les dplacements
et les forces additionnelles horizontales qui apparaissent dans les halls industriels
pendant un incendie. Ces effets pourront tre considrs par les ingnieurs dans leurs
calculs de dimensionnement afin dviter la ruine en chane de la structure et de
limiter les risques pour les vies humaines. Ce programme a t dvelopp dans le
cadre de la recherche europenne RFCS projet RFS2-CR-2007-00032.
MACS+ v2.06.3
Ce logiciel (anciennement FRACOF) dimensionne les dalles de planchers mixtes des
tempratures leves en tenant compte du bnfice de l'effet membrane de la
dalle. MACS+ vrifie aussi les poutres de rive et fournit la temprature critique pour
chacune des poutres.
ACE v1.8.2
Software ACE provides quick prices and weight estimations of steel framed buildings
based on I-profiles. The tool covers single-storey industrial buildings, and multi-storey
commercial and residential buildings. The options in the software for designing the floor
systems allow cost comparisons of various solutions. ACE is available in English, French,
Dutch and Polish languages.
LCA Calculator
The aim of the Steel LCA application is to perform simplified Life Cycle Analysis (LCA) of
hot-rolled I-section and tubular-section profiles. In addition, it provides a database of hotrolled I-section profiles and cold-formed and hot-finished tubular profiles
LCA is perfomed according to ISO standards 14040:2006 and 14044:2006. Moreover, the
analysis is performed taking into account the modular concept of European standard
EN15804:2012. According to this set of standards, the evaluation comprehends four main
steps.The application provides two additional optional steps: normalization and weighting.
These two steps are considered to be optional in ISO standards, although they have a relevant
role in a decision making process. Thus, the complete flowchart for the environmental life
cycle analysis is represented in the scheme below.
The application enables three different scopes for the LCA:
Option (i): a cradle-to-gate analysis (Module A according to EN15804:2012);
Option (ii): a cradle-to-gate analysis plus end-of-life recycling (Modules A and D according to
EN15804:2012); and
Option (iii): a cradle-to-grave analysis plus end-of-life recycling (Modules A to D according
to EN15804:2012).
5 main steps are needed to obtain LCA results in the application:
1. Choose the cross-section;
2. Input the values of the required parameters according to the analyzed case (length of
member, steel grade);
3. Input the lifespan of the analysis (the period of time considered for the analysis, in
years);
4. Select the scope of the analysis. Different options are available according to the scope
of the analysis:
In option (i): the user can select a coating system for the profile from a list of
available products;
In option (ii): in addition the user can select a recycling rate and a reuse rate
for steel and the corresponding transportation system;
And in option (iii): in addition, the user may select a transportation system for
steel (from the gate of the factory to the construction site) and a maintenance
strategy for the profile taking into account the lifespan of the analysis.
The results of the LCA are obtained in the results section. A detailed
calculation report is automatically generated that can be sent by e-mail.
Finally, in the configuration options, the user may select the default type of analysis as well as
the desired outputs.