Académique Documents
Professionnel Documents
Culture Documents
EN
TOC
FR
DE
ES
ISO 4063
135- S
ISO 7000:2004 M004 M003
ISO 7000:2004 ISO 7000:2004
0391 1309 0461
M014 M010
M015 M002
ISO 7010:2003 ISO 7010:2003 ISO 7010:2003 ISO 7010:2011
W001 P001 W017
ISO 7000:2004
0434
ISO 7000:2004 ISO 7000:2004 ISO 6405- 1:2004 ISO 6405- 1:2004
0423 0870 7.41 7.42
EN FR DE ES
WS 8
Seals package Pochette de joints Dichtungssatz Bolsa de recambio '
WS 9
WS 10
Dismantling Démontage Demontage Desmontaje '
WS 19
WS 20
Repairing Réparation Reparatür Reparacion '
WS 25
WS 26
Assembling Montage Montage Montaje '
WS 41
WS 42
Réservoir Reserva de
Energy chamber d’énergie Energiespeicher energia
'
WS 43
WS 44
Tooling Outillage Werkzeugausstattung Herramientas '
WS 45
FOREWORD AVANT- PROPOS
The contents of this manual are considered to be Le contenu de ce manuel est considéré comme
proprietary and confidential for the manufacturer appartenant au fabricant et comme confidentiel, il ne
and should not be reproduced without the prior doit pas être reproduit sans l’autorisation écrite
written permission of the manufacturer. préalable du fabricant.
Nothing contained in this document is intended to Aucun élément du contenu de ce document n’est
extend any promise, warranty or representation, entendu comme représentant une quelconque
expressed or implied regarding the manufacturer promesse, garantie ou représentation, ni explicite, ni
products described here in. implicite, eu égard aux produits du fabricant qui y sont
Any such warranties or other terms and conditions décrits.
of sale of products shall be in accordance with the Toute garantie de cette nature ou tout autre terme ou
standard terms and conditions of sale of such condition de vente des produits, doivent être
products, which are available upon request. conformes aux termes et conditions standards de
vente du fabricant, termes et conditions que l’on pourra
obtenir sur demande.
The design specification of this machine has been Les spécifications de cet appareil ont été homologuées
certified as complying with E.U. directives. Any comme étant conformes aux directives de l’ U.E . Toute
modification to any part is absolutely prohibited modification d’une pièce quelconque est absolument
and will result in the CE certification and marking interdite et aurait pour conséquence l’invalidation de
being rendered invalid. l’homologation CE.
The manufacturer reserves the right to make Le fabricant se réserve le droit d’apporter des
changes and improvements to products without modifications ou d’ajouter des perfectionnements aux
notice and without incurring any obligation to make produits sans préavis et sans encourir en quoi que ce
such changes or add such improvements to soit l’obligation d’apporter de telles modifications ni
products sold previously. d’ajouter de tels perfectionnements aux produits
vendus antérieurement.
VORWORT PREFACIO
Der Inhalt dieser Betriebsanleitung ist Eigentum des El contenido de este manual es considerado como
Herstellers und darf nicht ohne schriftliche propiedad del fabricante y como confidencial, no tiene
Genehmigung durch den Hersteller vervielfältigt que ser reproducido sin la autorización escrita del
werden. fabricante.
Die in dieser Anleitung enthaltenen Angaben Ningún elemento del contenido de este documento esta
berechtigen nicht zu irgendwelchen Forderungen considerado como promesa, garantía o representación
betreffend der hier beschriebenen des Herstellers de las productos del fabricante que están describiendos.
Produkte. Todas garantías de estas naturas o de todas otras formas
Alle Garantien, sonstige Absprachen und o condiciones de ventas de los productos, tienen que ser
Verkaufskonditionen werden in Übereinstimmung mit conformas a los terminos y condiciones estándar de
den allgemeinen Verkaufs- u. Lieferbestimmungen venta del fabricante. Los terminos y condiciones se
von dem Hersteller getroffen, die auf Wunsch gerne zur pereden obtener por pedida.
Verfügung gestellt werden.
Die Konstruktionsdaten dieses Gerätes sind als den Las especificaciones de este aparato están
EG - Vorschriften entsprechend bescheinigt. homologados conformas a las directivas de la U.E. Toda
Änderungen an Teilen und Baugruppen sind streng modificación de cualquier piezas esta prohibido y tendrá
verboten und führen zur Ungültigkeit der por consecuencia la invalidación de la homologación
CE - Zulassung und Kennzeichnung. C.E.
Der Hersteller behält sich das Recht vor, Änderungen El fabricante se reserva el derecho de hacer
und Verbesserungen an seinen Produkten ohne modificaciones o perfeccionamientos de los productos
Vorankündigungen durchzuführen. Seitens besteht sin advertencia y sin cualquier obligaciones de hacer los
dem Hersteller keine Verpflichtung solche Änderungen mismos modificaciones o perfeccionamientos a los
und Verbesserungen an bereits verkauften und productos vendidos anteriormente.
gelieferten Produkten nachträglich vorzunehmen.
WS 7
86769551 86420098
86629797
86629797 86624426
86420098
86420098
86610722
86352481
86352481
D 86764651
WS 9
MONTABERT WS 8
07 / 2016 SC 28scaling
86785979
WS 8
86634649
86634649
86636982
86735396
86636982
D 86764651
WS 9 MONTABERT
SC 28scaling 07 / 2016
86785979
1
M12
3 4 5
MONTABERT WS 10
07 / 2016 SC 28scaling
86785979
6
29 kg
64 lb
WS 11 MONTABERT
SC 28scaling 07 / 2016
86785979
9.52mm
3/8”
10
9
9.52mm
3/8”
11
6 kg
9.52mm 13 lb
3/8”
14mm
9/16”
12
13
MONTABERT WS 12
07 / 2016 SC 28scaling
86785979
14 15
16
17
18
WS 13 MONTABERT
SC 28scaling 07 / 2016
86785979
265 kg 76 kg
30 mm 167 lb
584 lb 1”3/16
19 20 21
30 mm
1”3/16
22
WS 45
MONTABERT WS 14
07 / 2016 SC 28scaling
86785979
97 kg
213 lb
23
24
26
25
WS 15 MONTABERT
SC 28scaling 07 / 2016
86785979
27
5.5 mm
7/32”
28 29
MONTABERT WS 16
07 / 2016 SC 28scaling
86785979
30 Ø 5 ± 1 mm
Ø 0.2 ”
10mm
3/8”
31
32
34
33
WS 17 MONTABERT
SC 28scaling 07 / 2016
86785979
35
Ø 82,5 mm 36
Ø 3.24 ”
Ø 74,5 mm
Ø 2.93 ”
780 mm
30.7 ”
OK
37
MONTABERT WS 18
07 / 2016 SC 28scaling
86785979
38
40
39
41
43
42
WS 19 MONTABERT
SC 28scaling 07 / 2016
86785979
EU - P600
US - 360
OK
1 2 3
EU - P600
US - 360
4 5 6
OK
7
MONTABERT WS 20
07 / 2016 SC 28scaling
86785979
EU - P600
US - 360
8 9 10
OK
11
13
12
500 h
WS 21 MONTABERT
SC 28scaling 07 / 2016
86785979
14
EU - P600
US - 360
15 16 17
OK
18
MONTABERT WS 22
07 / 2016 SC 28scaling
86785979
19 20
OK
21 22
408 mm
16.06 ”
WS 23 MONTABERT
SC 28scaling 07 / 2016
86785979
23
1 2 3
4=
OK
24
MONTABERT WS 24
07 / 2016 SC 28scaling
86785979
25
250 h
500 h
26
500 h
500 h
250 h
27
WS 25 MONTABERT
SC 28scaling 07 / 2016
86785979
1 2
4
5
OK
OK
MONTABERT WS 26
07 / 2016 SC 28scaling
86785979
8
MSA
32
10
MSA
32
WS 27 MONTABERT
SC 28scaling 07 / 2016
86785979
12
MSA
32
11
13
14
MONTABERT WS 28
07 / 2016 SC 28scaling
86785979
16
MSA
32
15
WS 29 MONTABERT
SC 28scaling 07 / 2016
86785979
61 kg
134 lb
17
18 19
MONTABERT WS 30
07 / 2016 SC 28scaling
86785979
20 21
22
MSA
10
23
WS 31 MONTABERT
SC 28scaling 07 / 2016
86785979
99 Nm
73 ft.lb
2
6 11
10 7
10 mm
3/8”
4 3
8 9
12 5
1
24
EM 10
25
WS 42
26
WS 44
MONTABERT WS 32
07 / 2016 SC 28scaling
86785979
27
28 WS 45
119 kg
262 lb
29
30
WS 33 MONTABERT
SC 28scaling 07 / 2016
86785979
31 32
33
Ø 180 mm - 186 mm
Ø 7.08”- 7.32”
34
MONTABERT WS 34
07 / 2016 SC 28scaling
86785979
35
36 37
38
WS 35 MONTABERT
SC 28scaling 07 / 2016
86785979
39 40 95 kg
209 lb
= =
OK
42
41
MONTABERT WS 36
07 / 2016 SC 28scaling
86785979
43
76 kg
167 lb
45
265 kg
584 lb
30 mm
44 1”3/16
30 mm
1”3/16
370 Nm
273 ft.lb
WS 37 MONTABERT
SC 28scaling 07 / 2016
86785979
14 mm
46 9/16”
WS9
10 mm
3/8”
10 mm
3/8” 140 Nm
103. ft.lb
140 Nm
103. ft.lb
14 mm
9/16”
28mm
1”1/8
150 Nm
110.6 ft.lb
28mm 30 mm 6 mm 10 mm 14 mm
1”1/8 1”3/16 1/4 ” 3/8 ” 9/16”
47 30 mm
1”3/16
80 Nm
59 ft.lb
6 mm
1/4 ”
50 Nm 28mm
37 ft.lb 1”1/8
80 Nm
59 ft.lb
MONTABERT WS 38
07 / 2016 SC 28scaling
86785979
48 49
50
14mm
9/16”
37 Nm
9.52mm 27 ft.lb
3/8”
90 Nm
66 ft.lb
WS 39 MONTABERT
SC 28scaling 07 / 2016
86785979
52
6 kg
13 lb 9.52mm
3/8”
152 Nm
51 112 ft.lb
9.52mm
53 3/8”
152 Nm
112 ft.lb
54
55
MONTABERT WS 40
07 / 2016 SC 28scaling
86785979
56
29 kg
64 lb
57
58
59
WS 41 MONTABERT
SC 28scaling 07 / 2016
86785979
2
6
+
+
+
0
5.5mm
7/32” 4
7
15mm
5/8”
1 3
10
11
8 12
+
N2
+
0
9
0
3.2 MPa
(32 bar)
464 psi
MONTABERT WS 42
07 / 2016 SC 28scaling
86785979
14
15mm
5/8”
13
37 Nm
5.5mm 27 ft.lb
7/32”
15 16
WS 43 MONTABERT
SC 28scaling 07 / 2016
86785979
LP/BP/ND
HP/HD/AP
86720893 86490323
Hydraulic tester HP / LP pressure checking device
Testeur hydraulique Contrôle de pression hydraulique
Hydraulikprüfvorrichtung Hydraulikdruckprüfvorrichtung
Probador hidráulico Control de presión hidráulica
86565348
Hoisting ring M10
Anneau de levage M10
Hebenhaken M10
Anillo de elevación M10
86626017
Inflation kit
Kit de gonflage
Füllvorrichtung
Kit de inflado
86745981 86261328
Nitrogen pressure reducer Grease hand pump
Détendeur d’azote Pompe à graisse
Stickstoffdruckreduzierventil Fettpresse
Descompresor de nitrógeno Bomba a grasa
86632866
Dismantling tube
Tube de démontage
Demontageröhre
Tubo de desmontaje
86476314
Grease cartridge (EM 22)
Cartouche de graisse (EM22)
Fettkartusche (EM 22)
Cartucho de grasa (EM 22)
86629631 86627320
Rust protector wax Bushing extracting tool
Cire de protection contre la corrosion Extracteur de douille mécanique
Rostschutzwachs Mechanischer Hülsenabzieher
Cera de protección contra la corrosión Extractor del manguito mecanizado
MONTABERT WS 44
07 / 2016 SC 28scaling
86785979
mm
in.
Ø68 70 kg 240
9.4“
Ø2.68” 154 lb
8.28”
210
12”
330
300
13”
Ø102
4.72”
120
Ø4”
600 600
A 24” 24”
70 240 70 260
3” 9.4” 3” 10.2“
240
9.4“
10.2”
600
24”
260
70
3”
A A
12”
300
230
9”
4 x Ø30 15
4 x Ø1.18” 6”
600
600
24”
B
24”
WS 45 MONTABERT
SC 28scaling 07 / 2016
86785979
FRANCE
CS 80097
MONTABERT SAS
203 Route de Grenoble
© Copyright 2016 Montabert. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos in this brochure
may show equipment with optional extras. Nothing contained in this brochure is intended to extend any warranty or representation expressed or implied,
regarding the products described herein. Any such warranties or other terms and conditions of sale products shall be in accordance with Montabert’s
standard terms and conditions of sale for such products, which are available upon request. Specifications and machines can be modified at any time
and without notice. Montabert Société par Actions Simplifiée (SAS) au capital de 8,459,359 € - 397 482 647 RCS LYON
www.montabert.com